This vintage-style lace strip repeats four burgundy sleighs on gold runners down a narrow cream panel. Between the sleighs are open fans with shell scallops, and ladder rails run down both long sides. It’s festive without being loud, and it hangs nicely from its three top loops.
The colors are cream lace, deep burgundy sleigh bodies, and soft gold runners. All terms are US crochet terms.
The finished strip measures 5.5 in (14.0 cm) wide and 23.25 in (59.1 cm) long from the tips of the hanging loops to the bottom picots. Before the border, it measures 5.0 in (12.7 cm) by 22.0 in (55.9 cm).
The lace strip is worked from the top down in rows, with every row holding 35 stitches. You crochet the sleigh bodies and runners separately, layer them, and sew them into the mesh windows. Two border rounds add the hanging loops and the picot edge.
Finished Size and Construction
- Finished size: 5.5 in x 23.25 in (14.0 cm x 59.1 cm), including loops
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Super fine (#1) fingering-weight mercerized cotton
- Hook: 2.5 mm
- Number of pieces: 1 lace strip, plus 4 sleigh bodies and 4 runners as appliqués
- Layout: 1 vertical strip, 4 sleigh repeats stacked top to bottom
- Strip size before border: 5.0 in x 22.0 in (12.7 cm x 55.9 cm)
- Border depth: 0.25 in (0.6 cm) per edge, plus 0.75 in (1.9 cm) hanging loops
Materials
Use a smooth, mercerized cotton so the lace stays crisp and the stitch definition shows. A 50 g ball of about 170 m works well.
- Cream: 45 g / 153 m
- Burgundy: 15 g / 51 m
- Gold: 10 g / 34 m
These quantities include a margin of roughly 15 percent.
Tools: 2.5 mm hook, tapestry needle, sharp sewing needle with matching thread (optional), rust-proof pins, blocking mat, spray bottle, stitch markers.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sc2tog – single crochet 2 together
- st(s) – stitch(es)
- sk – skip
- sp – space
- RS – right side
Special stitches
- Picot: ch 3, sl st in 3rd ch from hook.
- Rail start: ch 4 (counts as dc and ch 1), dc in 3rd st. This covers 3 sts.
- Rail end: dc in 3rd-to-last st, ch 1, dc in last st (3rd ch of turning ch). This covers 3 sts.
Counting rule: Every chain counts as 1 st in the 35-st row count. When a row says “ch 11, sk 11,” you skip 11 sts below, counting chains and dc alike.
Gauge and Checkpoints
- Dc gauge: 14 dc x 6 rows = 2 in (5.1 cm) square, so 7 sts and 3 rows per inch.
- Sc gauge (appliqués): 7 sc x 8 rows = 1 in (2.5 cm).
Test first: Work Rows 1–6, which give you the top fan. This piece should measure 5.0 in (12.7 cm) wide and 2.0 in (5.1 cm) tall. Also make one complete sleigh, then check it against the sizes given below.
Checkpoints along the strip:
- After Row 6: 2.0 in (5.1 cm)
- After Row 21: 7.0 in (17.8 cm)
- After Row 36: 12.0 in (30.5 cm)
- After Row 51: 17.0 in (43.2 cm)
- After Row 66: 22.0 in (55.9 cm)
If your piece is too big, go down 0.25 mm in hook size. If it is too small, go up 0.25 mm. If only the length is off, check how tall your chains are. Loose chains in the fan rows stretch the rows.

Lace Strip
With cream, ch 37.
Row 1: Dc in 4th ch from hook and in each ch across, turn. (35 sts, with the skipped ch-3 counting as a dc.)
Fan (5 rows)
F1: Rail start, ch 11, sk 11, dc in next 7 sts (hub), ch 11, sk 11, rail end, turn. (3 + 11 + 7 + 11 + 3 = 35 sts)
F2: Rail start, ch 8, sk the ch-11 sp, [dc in next hub dc, ch 1] 6 times, dc in last hub dc, ch 8, rail end, turn. (3 + 8 + 13 + 8 + 3 = 35 sts)
F3: Rail start, ch 5, [dc in next dc, ch 2] 6 times, dc in last spoke dc, ch 5, rail end, turn. (3 + 5 + 19 + 5 + 3 = 35 sts)
F4: Rail start, ch 2, [dc in next dc, ch 3] 6 times, dc in last spoke dc, ch 2, rail end, turn. (3 + 2 + 25 + 2 + 3 = 35 sts)
F5: Rail start, ch 1, [3 dc in next spoke dc, ch 1] 6 times, 3 dc in last spoke dc, ch 1, rail end, turn. (3 + 1 + 27 + 1 + 3 = 35 sts; 7 shell scallops)
The spokes stay at 7 dc in every fan row. Only the chain gaps between them grow (1, 2, then 3), and the side chains shrink by the same amount, so the fan opens downward while the width stays the same.
Window (10 rows)
W1: Ch 4 (counts as dc and ch 1), sk 1, dc in next st, [ch 1, sk 1, dc in next st] across, turn. (18 dc + 17 ch = 35 sts)
W2–W10: Ch 4, dc in next dc, [ch 1, dc in next dc] across, ending in the 3rd ch of the turning ch, turn. (35 sts each row)
The window is 10 rows, about 3 1/3 in (8.5 cm) tall. The outer dc, ch 1, dc of each mesh row line up with the fan rails, so the side rails run unbroken.
Repeat Map
- Rows 2–6: Fan, Rows 7–16: Window
- Rows 17–21: Fan, Rows 22–31: Window
- Rows 32–36: Fan, Rows 37–46: Window
- Rows 47–51: Fan, Rows 52–61: Window
- Rows 62–66: Final fan (bottom scallops)
Each fan block is 1 2/3 in (4.2 cm), and each fan-plus-window repeat is 5.0 in (12.7 cm). That gives 1 + (4 x 15) + 5 = 66 rows, or 22.0 in (55.9 cm). Do not fasten off. Go straight on to the border.
Sleigh Body (make 4, burgundy)
Row 1: Ch 20, sc in 2nd ch from hook and in each ch across, turn. (19 sc)
Row 2: Ch 1, 2 sc in first st, sc in next 17 sts, 2 sc in last st, turn. (21 sc)
Row 3: Ch 1, 2 sc in first st, sc in next 19 sts, 2 sc in last st, turn. (23 sc)
Row 4: Ch 1, 2 sc in first st, sc in next 21 sts, 2 sc in last st, turn. (25 sc)
Rows 5–8: Ch 1, sc in each st across, turn. (25 sc each row; 1 in / 2.5 cm tall)
Back, Row 9: Ch 1, sc in first 7 sts, turn. Leave the remaining 18 sts unworked. (7 sc)
Back, Rows 10–13: Ch 1, sc in each st, turn. (7 sc)
Back, Row 14: Ch 1. On the inner edge (the edge toward the unworked sts), sc2tog. Sc in each st until 1 remains. On the outer edge, work 2 sc in the last st. (7 sc; the back now leans outward.) Fasten off.
Front, Row 9: Work on the same side as back Row 9. Sk the next 13 sts of Row 8, which form the seat dip. Join burgundy in the next st, ch 1, sc in the same st and in the last 4 sts, turn. (5 sc; 7 + 13 + 5 = 25)
Front, Rows 10–11: Ch 1, sc in each st, turn. (5 sc)
Front, Row 12: Ch 1. Sc in each of the 4 sts on the inner side, then work 3 sc in the outer-edge st. (7 sc; this flares the front.) Fasten off.
Edging: Join burgundy anywhere. Sc evenly around the whole body, working 3 sc at each upper tip, then sl st to the first sc. Fasten off.
The body is 3.8 in (9.7 cm) wide and 1.9 in (4.8 cm) tall at the back.
Runner (make 4, gold)
Row 1: Ch 26, sc in 2nd ch from hook and in each ch across, turn. (25 sc)
Row 2: Ch 1, sc in each st across, turn. (25 sc)
Row 3 (struts): Sl st in first 4 sts. In the next st, work a strut: ch 7, sl st in 2nd ch from hook and in next 5 ch. Sl st in next 7 sts, strut in next st, sl st in next 7 sts, strut in next st, sl st in last 4 sts. (4 + 1 + 7 + 1 + 7 + 1 + 4 = 25 sts; the struts sit on sts 5, 13, and 21, so they are centered.)
First scroll: Without turning, ch 12. Work 2 sc in 2nd ch from hook and in each remaining ch (22 sc), then sl st to the runner end. Fasten off.
Second scroll: Join gold at the other end of the runner and repeat.
Twist each scroll into a C-curl that turns up and in toward the struts, then tack it in place with the tail. The runner with its scrolls is 3.9 in (9.9 cm) wide, and the struts are 0.5 in (1.3 cm) tall.
Assembling the Sleighs
- Center a runner in the lower part of a window, about 0.4 in (1.0 cm) above the fan below. Sew it to the mesh, including both scrolls.
- Place the sleigh body over the struts so its bottom edge covers the strut tips by about 1/8 in (0.3 cm). This layers the burgundy over the gold.
- Sew around the body edging with small stitches through the mesh.
The full sleigh unit is about 2.6 in (6.6 cm) tall, which leaves even open lace above and below it. Repeat for all 4 windows.
Border
Border gauge: 7 sc per inch along the top and bottom edges, and 6 sc per inch along the sides (2 sc per dc row-end).
Round 1 (RS): Work 3 sc in the last st of Row 66 (corner). Then work along the side: 2 sc in each row-end of Rows 65 down to 2 (128 sc). Work 3 sc in the base of the first st of Row 1 (corner), sc in the base of each of the next 33 sts, and 3 sc in the base of the last st (corner). Work 2 sc in each row-end of Rows 2–65 (128 sc), then 3 sc in the first st of Row 66 (corner). Sc in the next 33 sts and sl st to the first sc.
Round 1 counts per side, with the corner groups included in the top and bottom counts:
- Top: 3 + 33 + 3 = 39 sc
- Bottom: 3 + 33 + 3 = 39 sc
- Each side: 128 sc
- Total: 39 + 128 + 39 + 128 = 334 sc
Round 2: Ch 1. Work 1 sc in each sc around (334 sc), with these additions:
- Top (39 sc): After the 2nd, 20th, and 38th sc, ch 10 and sl st in the top of the sc just made. This makes 3 hanging loops, one at each corner and one at the center.
- Bottom (39 sc): Sc in next 2 sc, picot, [sc in next 3 sc, picot] 12 times, sc in last sc. (2 + 36 + 1 = 39 sc; 13 picots)
- Sides: 128 sc each, plain.
Sl st to the first sc. Fasten off.
Why the math works: Each edge’s starting count comes straight from its base. The top and bottom are 35 sts plus 4 extra sts from the corner increases (each 3-sc corner group adds 2 sts over its 1 base st). The sides cover 64 row-ends at 2 sc each. At 3 rows per inch, those 64 rows are 21 1/3 in (54.2 cm), so 128 sc gives exactly 6 sc per inch. That’s slightly fewer than the flat sc gauge, which keeps the long lace edges from rippling. Picots and loops sit on top of existing sc and never change the count.
Final Blocking
- Weave in all tails along the rails or behind the appliqués.
- Soak the strip in cool water for 10 minutes and press out the water in a towel. Don’t wring it.
- Pin the strip to 5.5 in (14.0 cm) wide and 23.25 in (59.1 cm) long, measuring from the loop tips to the picot tips.
- Pin each fan spoke and shell scallop open, and pin each bottom picot to a point.
- Smooth the sleighs flat and ease the scrolls into neat curls.
- Mist lightly and let it dry completely before unpinning.
Final Quality-Control Checklist
- Every lace row has 35 sts.
- There are 4 fans, 4 windows, and a final scalloped fan.
- The rails are straight and the same width on both sides.
- The sleighs are centered, all face the same direction, and have their struts hidden under the bodies.
- Border Round 2 has 334 sc, 3 loops, and 13 picots.
- The strip measures 5.5 in (14.0 cm) by 23.25 in (59.1 cm).
Troubleshooting
- Fans pucker: Your chain gaps are too tight. Loosen your chains, or go up a hook size for the fan rows only.
- Strip narrows in the windows: Make sure each mesh row has 18 dc.
- Sides ripple after the border: Rework them at 2 sc per row-end, and don’t add extras.
- Sleigh is too wide for the window: Check your sc gauge, or leave off the body edging.
- Scrolls flop open: Tack them in two places and stiffen lightly while blocking.
Care
Hand wash cool and lay flat to dry, reshaping the fans and scrolls while damp. Press lightly on the wrong side with a cool iron if needed.

Final Notes
The measurement chain is short and reliable. A 35-st row gives 5.0 in (12.7 cm) of width. Sixty-six rows give 22.0 in (55.9 cm) of length. The border adds 0.25 in (0.6 cm) per edge and 0.75 in (1.9 cm) of loops, for a finished 5.5 in x 23.25 in (14.0 cm x 59.1 cm). Check your gauge early, count to 35 on every row, and the sleighs will fit their windows perfectly.
Happy crocheting!