This curtain is made of small, airy fan motifs hung in long vertical strands. Each fan has a solid burnt-orange half-circle center, a ring of butter-yellow spokes, and six rounded yellow scallops along the top. Thin cream chains frame every fan and link it to the next one, so light comes through the whole panel.
The palette is warm and simple: burnt orange, butter yellow, and cream. It is a vintage style, and it looks good in a doorway, across a window, or as a room divider.
This pattern uses US crochet terms. Each fan measures 5 in (12.7 cm) wide by 2.5 in (6.4 cm) tall. The finished curtain has 8 strands of 15 fans and hangs about 42 in (106.7 cm) wide by 73.5 in (186.7 cm) long.
Here is how it goes together. First you work each fan flat in rows: two orange rows, then two yellow rows. Then cream chain connectors join the fans into strands, and a cream loop frame finishes the top and bottom of each strand. The top loops slide onto a curtain rod.
Finished Size and Construction
- Finished size: about 42 in (106.7 cm) wide x 73.5 in (186.7 cm) long, hung
- Skill level: Easy-Intermediate
- Terminology: US
- Yarn weight: DK (light worsted, #3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 120 fan motifs, joined into 8 strands
- Layout: 8 strands x 15 fans; two groups of 4 strands with a 2 in (5.1 cm) center gap
- Piece size: 5 in (12.7 cm) wide x 2.5 in (6.4 cm) tall per fan
- Size before border: each strand runs 66.5 in (168.9 cm) from the first fan’s tips to the last fan’s tips
- Border depth: the loop frame at each end adds 3.5 in (8.9 cm) to the length
Materials
Use a smooth mercerized cotton or a cotton blend in DK weight. Cotton gives crisp stitch definition, the scallops stay rounded, and it won’t stretch much while hanging. Stay away from fuzzy or very stretchy yarns. Long strands of those can grow over time.
The amounts below assume 50 g balls of about 115 m (126 yd) each:
- Burnt orange (A): 150 g, 345 m (377 yd)
- Butter yellow (B): 300 g, 690 m (755 yd)
- Cream (C): 100 g, 230 m (252 yd)
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Locking stitch markers
– Scissors
– Rust-proof pins and a blocking board
– Spray bottle, plus spray starch if you want it
– Curtain rod about 48 in (121.9 cm) long
All quantities include a margin of about 15% to cover swatching, tails, and small tension differences.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- tr: treble crochet (yarn over twice, insert hook, pull up a loop, [yarn over, pull through 2 loops] 3 times)
- sp: space
- st(s): stitch(es)
- J: junction chain (the marked chain where two cream arms meet)
Special stitch: Shell: 7 dc worked in the same ch-3 space.
Gauge and Checkpoints
Gauge matters here, because 120 fans that are each slightly too big add up to a long curtain. Make one complete fan before anything else and measure it flat, without pinning.
- Chain gauge: 5 ch = 1 in (2.5 cm)
- After Row 2: the orange half-circle is 2 in (5.1 cm) wide and 1 in (2.5 cm) tall
- After Row 3: the spokes span 3.75 in (9.5 cm) tip to tip
- After Row 4: the fan is 5 in (12.7 cm) wide and 2.5 in (6.4 cm) tall
If your fan comes out bigger than 5 in (12.7 cm), drop to a 3.25 mm hook. If it’s smaller, go up to a 3.75 mm hook. Measure your chain gauge too, since all the cream arms depend on it. If a 15-ch arm is longer than 3 in (7.6 cm), tighten your chains a little or use a smaller hook just for the cream.

Fan Motif (Make 120)
The fan is worked flat in rows, from the center outward. The flat bottom edge holds the two outer tips, which is where the cream arms attach later.
Foundation: With A, ch 4, sl st in first ch to form a ring.
Row 1 (A): Ch 3 (counts as dc), work 9 dc in ring. Turn. (10 dc)
The dc fill only half of the ring, so the row lies as a half-circle.
Row 2 (A): Ch 3 (counts as dc), dc in same st, 2 dc in each of next 8 sts, dc in top of beginning ch-3. Fasten off A. (19 dc: 10 worked one per existing st + 9 extra)
Check: the half-circle should be 2 in (5.1 cm) wide.
Row 3 (B): Don’t turn. Join B with a sl st in the last dc of Row 2, so you start at the right-hand end of the flat edge. Ch 4 (counts as tr), ch 3, skip 2 dc, tr in next dc; repeat from * 5 more times. Turn. (7 tr, 6 ch-3 sps)*
The 7 tr stand up from the orange like spokes. The first and last tr lie almost flat, in line with the bottom edge.
Check: 19 dc = 1 + (6 x 3), so the last tr lands in the last dc.
Row 4 (B): Ch 1, sc in first tr, Shell in next ch-3 sp, sc in next tr; repeat from * 5 more times, placing the final sc in top of beginning ch-4. Fasten off B. (6 shells, 7 sc; 49 sts total)*
The first and last sc of Row 4 are the fan’s tips. They sit at the lower outer corners.
Check: the fan is 5 in (12.7 cm) wide and 2.5 in (6.4 cm) tall.
Weave in the orange and yellow tails now, along the back of the solid orange stitches. They will be much harder to reach once the strands are joined.
Make All Pieces
- Fans: 120 (Rows 1–2 in A, Rows 3–4 in B)
- Connectors (C): 14 per strand, 112 total
- Loop frames (C): 2 per strand (top and bottom), 16 total
Each “F” below is one fan and each “L” is one loop frame. Each column is one strand, and the bar marks the center gap.
Strand: 1 2 3 4 | 5 6 7 8
top L L L L | L L L L
row 1 F F F F | F F F F
row 2 F F F F | F F F F
... (15 fans per strand)
row 15 F F F F | F F F F
bottom L L L L | L L L L
Joining: Cream Connectors
Every pair of fans in a strand is linked with an hourglass of cream chain. Two arms run down from the upper fan’s tips and meet at a junction below its center. Two longer arms then run from that junction down past the lower fan’s scallops to the lower fan’s tips.
Lay two fans flat with the scallops facing up, with their tip lines about 4.75 in (12.1 cm) apart.
Pass 1: Join C with a sl st in the right tip of the lower fan. Ch 20, then place a marker in the 20th ch you just made (J). Ch 15, sl st in the right tip of the upper fan. Fasten off. (35 ch)
Pass 2: Join C with a sl st in the left tip of the lower fan. Ch 20, sl st in the marked J. Ch 15, sl st in the left tip of the upper fan. Fasten off. (35 ch, joined at J)
Stitch logic: Each arm attaches into a tip sc and nowhere else. On middle fans, each tip takes 2 sl sts: the arm coming up from the fan below and the arm going down to the fan above. Work the second sl st into the same sc. No stitches are added to the fans themselves.
Tension advice: Chain at your gauge, 5 ch = 1 in (2.5 cm). Tight connectors make the fans cup, and loose ones let the strand sag unevenly. Before you sl st into each tip, lay the arm flat and check that it isn’t twisted.
Why these lengths: The tips sit 2.5 in (6.4 cm) out from the center line. A 15-ch upper arm, 3 in (7.6 cm), reaches the center about 1.7 in (4.3 cm) below the upper tips. A 20-ch lower arm, 4 in (10.2 cm), then drops about 3.1 in (7.9 cm) to the lower tips. That clears the 2.5 in (6.4 cm) fan with room above the scallops. Together that gives a repeat of about 4.75 in (12.1 cm) per fan.
Size checkpoint: Once 3 fans are joined, measure from the first fan’s tips to the third fan’s tips. It should be 9.5 in (24.1 cm). A full strand of 15 fans has 14 connectors and measures 66.5 in (168.9 cm) from tip line to tip line.
Join all 8 strands the same way, and weave in the cream tails along the chains as you go.
Border: Loop Frames at Each Strand End
The strands have no side edging; the cream framing is their border. A loop frame closes the top of the first fan and the bottom of the last fan. The two frames are identical; they just face opposite directions.
Border gauge: 5 ch = 1 in (2.5 cm), the same as the connectors.
Loop Frame (make 2 per strand): Join C with a sl st in the right tip of the end fan. Ch 15 (right arm). Ch 14, sl st in 8th ch from hook to form the loop, then sl st in each of next 6 ch back toward the arm (stem). Ch 15 (left arm), sl st in the left tip of the same fan. Fasten off. (15 + 14 + 15 = 44 ch, 7 sl sts)
On the top frame, the arms run up past the first fan’s scallops, and the loop goes over the rod. On the bottom frame, the arms run down beneath the last fan, and the loop hangs free as a small tail.
Counts per side of one strand:
– Right side: 15 (top frame) + 14 x (20 + 15) (connectors) + 15 (bottom frame) = 520 ch
– Left side: the same, 520 ch
– Center line: 2 loops of 8 ch and 2 stems of 6 ch, one at each end
Why the math works: Each 15-ch frame arm meets the center 1.7 in (4.3 cm) from the tips, the same as a connector’s upper arm, so the end fans hang at the same angle as every other fan. The 6-ch stem adds 1.2 in (3.0 cm) and the loop adds about 0.6 in (1.5 cm). Together with the 1.7 in (4.3 cm) drop of the arms, that makes 3.5 in (8.9 cm) per end. Total length: 3.5 + 66.5 + 3.5 = 73.5 in (186.7 cm). Total width: 8 strands x 5 in (12.7 cm) = 40 in (101.6 cm), plus the 2 in (5.1 cm) center gap = 42 in (106.7 cm).
Final Blocking
- Block the fans in batches before you join them, or block each finished strand in sections.
- Spray a fan until it’s damp but not dripping.
- Pin the flat bottom edge in a straight line 5 in (12.7 cm) long, with one pin at each tip.
- Pin the top of each of the 6 shells so the scallops are evenly rounded and the fan is 2.5 in (6.4 cm) tall.
- Straighten the 7 spokes so they fan out evenly from the orange center.
- For joined strands, pin 3 fans at a time with the tip lines 4.75 in (12.1 cm) apart, and pull each cream arm straight.
- If you want crisper scallops, mist lightly with spray starch.
- Let everything dry completely before you unpin it or hang it.
Final Quality-Control Checklist
- Every fan has 19 orange dc, 7 tr spokes, and 6 shells.
- Every fan is 5 in (12.7 cm) wide and 2.5 in (6.4 cm) tall.
- Each strand has 15 fans, 14 connectors, and 2 loop frames.
- Every J is a single joined point with no gaps.
- No cream arm is twisted.
- Tip lines are 4.75 in (12.1 cm) apart all along each strand.
- All 8 strands measure 73.5 in (186.7 cm) and are within 0.5 in (1.3 cm) of each other.
- All tails are woven in and trimmed.
Troubleshooting
- Fan cups or ruffles: Row 2 has the wrong count. Recount to 19 dc.
- Last tr doesn’t land in the last dc: Check that you skipped exactly 2 dc each time and that Row 2 has 19 sts.
- Scallops are flat or pointed: Make sure each shell has exactly 7 dc and all of them are in the ch-3 space. Then re-block.
- Strand is too long: Your chains are loose. Rework the connectors with a smaller hook.
- Fans tilt sideways: The two arms on one side don’t match in length. Recount each pair: 20 ch below J and 15 ch above it.
- Strands hang at different lengths: Measure each strand against the 9.5 in (24.1 cm) checkpoint and fix the outlier connectors.
Care
Hand wash in cool water with a mild detergent, gently press out the water, and lay the strands flat to dry, re-pinning if needed. Don’t hang the curtain while it’s wet, because the weight of the water stretches the chains.

Final Notes
The measurement chain runs from small to large. Chain gauge is 5 ch = 1 in (2.5 cm). A 2 in (5.1 cm) orange half-circle grows to a 5 in (12.7 cm) by 2.5 in (6.4 cm) fan. Fans repeat every 4.75 in (12.1 cm), so 15 fans make a 66.5 in (168.9 cm) strand body. The loop frames bring each strand to 73.5 in (186.7 cm), and 8 strands with a center gap make a curtain 42 in (106.7 cm) wide. If your first fan and your first 3-fan strand hit their checkpoints, everything after that will line up.
Happy crocheting!