The Evergreen Bauble is a plastic bag holder shaped like a big Christmas ornament. It is a rounded teardrop. It has a small opening at the bottom for pulling bags out, a full round belly, a narrow neck at the top for stuffing bags in, and a long strap with a hanging slot that slips over a cabinet knob or hook.
The colors are soft and festive. Sage green makes the solid base, the fill bands, the neck and the strap. Cream is used for two bands of fan-shaped scallops and for the open diamond mesh across the belly. Gold metallic yarn outlines each scallop band and edges the top rim, the bottom opening and the strap. The mesh lets you see how many bags are left.
This pattern uses US crochet terms. The finished holder is about 13 in (33.0 cm) tall from the bottom opening to the top rim and 20 in (50.8 cm) around at the widest point (10 in / 25.4 cm wide laid flat). The strap adds 6 in (15.2 cm), for a total hanging length of about 19 in (48.3 cm).
The holder is one seamless piece. You start at the bottom opening with a chain ring and increase in sc rounds to make the rounded base. Next come a cream shell band with a gold outline, then cream mesh rounds that get shorter to shape the shoulders. A second shell band and a decrease round form the neck. The strap is worked in rows from the rim, and the gold edging goes on last.
Finished Size and Construction
- Finished size: body 13 in (33.0 cm) tall; 20 in (50.8 cm) around at the widest; 19 in (48.3 cm) including the strap
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton or cotton blend; metallic worsted for gold
- Hook: 4.5 mm (US 7)
- Number of pieces: 1
- Layout: One seamless body worked bottom-up in joined rounds; strap worked in rows from the rim
- Piece size: top rim 10 in (25.4 cm) around; bottom opening 8 in (20.3 cm) around, about 2.5 in (6.4 cm) across
- Size before border: 12.75 in (32.4 cm) tall
- Border depth: 0.25 in (0.6 cm) of gold reverse sc at the rim and the bottom opening
Materials
Use a smooth cotton or cotton blend. Cotton keeps its shape and does not sag when the holder is full of bags. Any worsted cotton that matches the gauge below will work.
- Sage green (Color A): 70 g / 120 m
- Cream (Color B): 50 g / 85 m
- Gold metallic (Color C): 10 g / 25 m (a worsted metallic, or a thin metallic held double)
Tools:
- 4.5 mm (US 7) hook
- Stitch markers
- Tapestry needle
- Scissors
- Tape measure
- Spray bottle and pins
- A balloon or rolled towel for shaping
All yarn amounts include a margin of about 15 percent.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- sc2tog: single crochet 2 together
- inc: 2 sc in the same stitch
- BLO: back loop only
- FLO: front loop only
- rev sc: reverse single crochet
- st(s): stitch(es)
Special stitches:
- Shell: Work the stated number of dc (7 in the lower band, 5 in the upper band) all in the same stitch.
- Reverse sc (crab stitch): Working from left to right (if you crochet right-handed), insert the hook in the next stitch to the right, yarn over, pull up a loop, yarn over and pull through both loops. This makes a twisted, rope-like edge.
Gauge and Checkpoints
Gauge: 16 sc and 18 rounds = 4 in (10.2 cm) in sc. That is 4 sts and 4.5 rounds per inch.
Use Rounds 1–10 as your test piece. Make them first and measure before you go on. They are quick to redo.
Checkpoints:
- After Round 10: 80 sts; 20 in (50.8 cm) around; about 2.2 in (5.6 cm) tall
- After Round 14: about 4 in (10.2 cm) tall
- After Round 24: about 9.5 in (24.1 cm) tall
- After Round 29: 60 sts; 15 in (38.1 cm) around
- After Round 36: 40 sts; 10 in (25.4 cm) around; 12.75 in (32.4 cm) tall
- After the border: 13 in (33.0 cm) tall
If the base measures more than 20.5 in (52.1 cm) around after Round 10, go down to a 4 mm hook. If it measures less than 19.5 in (49.5 cm), go up to 5 mm. Don’t change the stitch counts, because the shell and mesh repeats depend on them.

Pattern
Join every round with a sl st to the first stitch. The beginning ch 1 does not count as a stitch. Place a marker in the first stitch of each round.
Bottom Base (Color A, sage green)
Round 1: Ch 32 and join with a sl st to the first ch, taking care not to twist the chain. Ch 1, sc in each ch around. (32 sts)
This chain ring is the bottom opening.
Round 2: Ch 1, sc in next 3 sts, inc in next st 8 times. (40 sts)
Round 3: Ch 1, sc in next 4 sts, inc 8 times. (48 sts)
Round 4: Ch 1, sc in each st. (48 sts)
Round 5: Ch 1, sc in next 5 sts, inc 8 times. (56 sts)
Round 6: Ch 1, sc in next 6 sts, inc 8 times. (64 sts)
Round 7: Ch 1, sc in each st. (64 sts)
Round 8: Ch 1, sc in next 7 sts, inc 8 times. (72 sts)
Round 9: Ch 1, sc in next 8 sts, inc 8 times. (80 sts)
Round 10: Ch 1, sc in each st. (80 sts)
The plain rounds between the increase rounds make the base curve up into a rounded bowl instead of lying flat. Fasten off A.
Lower Shell Band
Round 11 (Color B, cream): Join B in any st. Ch 1, sc in the same st, skip 3 sts, 7 dc in next st (shell), skip 3 sts, sc in next st around. On the last repeat, end with skip 3 sts and sl st to the first sc. (10 shells; 80 sts: 10 × [1 sc + 7 dc])
Fasten off B.
Round 12 (Color C, gold): Join C in the first sc of Round 11. Ch 1, sc in BLO of each st around. (80 sts)
Because this round follows the tops of the shells, it makes a gold scalloped line. Fasten off C.
Round 13 (Color A, green fill): Join A in the first st, which sits above a Round 11 sc. Ch 4 (counts as tr), dc in next st, hdc in next st, sc in next 3 sts, hdc in next st, dc in next st, tr in next st around, leaving out the final tr, and join to the top of the ch 4. (80 sts: 10 repeats of 8)
The tall stitches sit in the dips between the scallops. They form green triangles and make the round level again.
Round 14 (A): Ch 1, sc in each st. (80 sts) Fasten off A.
Checkpoint: the piece is about 4 in (10.2 cm) tall.
Diamond Mesh Belly (Color B, cream)
Round 15: Join B in any st. Ch 1, sc in the same st, ch 5, skip 3 sts, sc in next st around. On the last repeat, end with ch 5, skip 3 sts and sl st to the first sc. (20 ch-5 loops)
Rounds 16–19: Sl st in the next 3 ch to reach the center of the first loop. Ch 1, sc in the same loop, ch 5, sc in next loop around, ending with ch 5, then sl st to the first sc. (20 ch-5 loops in each round)
Rounds 20–22: Sl st in the next 2 ch, ch 1, sc in the same loop, ch 4, sc in next loop around, ending with ch 4, then sl st to the first sc. (20 ch-4 loops in each round)
Rounds 23–24: Sl st in the next 2 ch, ch 1, sc in the same loop, ch 3, sc in next loop around, ending with ch 3, then sl st to the first sc. (20 ch-3 loops in each round)
Fasten off B. The shorter loops narrow the shoulders, while the loop count stays at 20 the whole way. Checkpoint: about 9.5 in (24.1 cm) tall.
Upper Shell Band and Neck
Round 25 (A): Join A in any ch-3 loop. Ch 1, 3 sc in each ch-3 loop around. (60 sts: 20 loops × 3)
Round 26 (A): Ch 1, sc in each st. (60 sts) Fasten off A.
Round 27 (B): Join B. Ch 1, sc in the same st, skip 2 sts, 5 dc in next st, skip 2 sts, sc in next st around. On the last repeat, end with skip 2 sts and sl st to the first sc. (10 shells; 60 sts: 10 × [1 sc + 5 dc]) Fasten off B.
Round 28 (C): Join C in the first sc. Ch 1, sc in BLO of each st. (60 sts) Fasten off C.
Round 29 (A): Join A in the st above a Round 27 sc. Ch 4 (counts as tr), dc in next st, hdc in next st, sc in next st, hdc in next st, dc in next st, tr in next st around, leaving out the final tr, then join. (60 sts: 10 repeats of 6)
Checkpoint: 15 in (38.1 cm) around.
Round 30 (A): Ch 1, sc in next st, sc2tog 20 times. (40 sts)
Rounds 31–36 (A): Ch 1, sc in each st. (40 sts) Fasten off A.
Checkpoint: 10 in (25.4 cm) around and 12.75 in (32.4 cm) tall.
Strap (Color A)
Flatten the holder so the round joins sit at the center back. Mark the 6 center-back sts of Round 36 and join A in the first one.
Row 1: Ch 1, then working in BLO, sc in each of the 6 marked sts, turn. (6 sts)
Rows 2–9: Ch 1, sc in each st, turn. (6 sts)
Rows 10–23, side 1: Ch 1, sc in the first 2 sts only, turn. (2 sts) Work 14 rows in total. Don’t fasten off; drop the loop.
Rows 10–23, side 2: Leave the middle 2 sts of Row 9 unworked. Join a separate strand of A in the last 2 sts of Row 9 and work 14 rows of 2 sc. Fasten off.
Row 24: Pick up the dropped loop. Ch 1, sc in the 2 sts of side 1, ch 2, sc in the 2 sts of side 2, turn. (4 sc + 2 ch = 6 sts)
Rows 25–27: Ch 1, sc in each st and ch, turn. (6 sts) Fasten off.
The strap is 27 rows, or 6 in (15.2 cm), long. Near the top it has a hanging slot of about 3.1 in (7.9 cm).
Border
All of the edging is gold (C) reverse sc.
Border gauge: Reverse sc is worked 1 per stitch, so it matches the sc gauge of 4 sts per inch. That is why the edges don’t ruffle or pull in.
Top rim: Join C at the center back. Working in FLO of Round 36, rev sc in each st around, including the sts under the strap. (40 rev sc) At 4 sts per inch, 40 sts makes 10 in (25.4 cm), the same as the neck.
Bottom opening: Join C in the unused loops of the Round 1 foundation chain. Rev sc in each st around. (32 rev sc) At 4 sts per inch, 32 sts makes 8 in (20.3 cm), the same as the original opening.
Strap edges: Join C at the base of one strap edge. Work rev sc in each row-end up the side (27), in each st across the top (6) and in each row-end down the other side (27). (60 rev sc) The row gauge is 4.5 rows per inch, so 1 rev sc per row gives a slightly snug edge that keeps the strap from stretching.
Each edge adds about 0.25 in (0.6 cm), bringing the body to 13 in (33.0 cm).
Final Blocking
- Weave in all ends through stitches of the same color.
- Spray the whole piece until it is damp but not soaked.
- Blow up a balloon to about 20 in (50.8 cm) around and place it inside, or stuff the holder firmly with a rolled towel.
- Round out the base, open each mesh diamond with your fingers and spread the shells into even fans.
- Pin the strap straight and flat at 6 in (15.2 cm).
- Let it dry completely, then remove the balloon or towel.
Final Quality-Control Checklist
- The base is 80 sts and 20 in (50.8 cm) around.
- Both shell bands have 10 even shells.
- The gold lines follow the scallops without puckering.
- The mesh has 20 loops in every round.
- The neck is 40 sts and 10 in (25.4 cm) around.
- The strap is centered at the back, and the slot fits over your knob.
- A bag pulls through the bottom opening easily.
- All ends are secure.
Troubleshooting
The base ruffles: Go down a hook size, or add another plain round between increase rounds.
The base cups too sharply: Go up a hook size for Rounds 1–10.
The shells lean or crowd together: Recount the skipped stitches. Each repeat is exactly 8 sts in the lower band and 6 sts in the upper band.
The gold round is tight: Metallic yarn doesn’t stretch. Work Rounds 12 and 28 with a hook one size larger.
The mesh twists: Start each round at the center of a loop, not at its edge.
The strap stretches: Work the strap with a hook one size smaller.
Care
Hand wash in cool water and dry over a balloon or a rolled towel to keep the shape. Don’t tumble dry, because heat can dull the metallic yarn.

Final Notes
Here is the measurement chain:
- A 32-st ring makes an 8 in (20.3 cm) bottom opening.
- The base grows to 80 sts and 20 in (50.8 cm) around.
- The shells and the first mesh rounds keep that width.
- The shorter loops bring it down to 60 sts and 15 in (38.1 cm).
- The decrease round sets the neck at 40 sts and 10 in (25.4 cm).
- The gold border adds 0.25 in (0.6 cm), for a 13 in (33.0 cm) body.
- The 6 in (15.2 cm) strap brings the hanging length to 19 in (48.3 cm).
Check each number as you go.
Happy crocheting!