Sage Sprig Hanging Toilet Roll Basket Crochet Pattern

This hanging basket holds two standard toilet rolls and hangs from a towel bar on two soft straps. It has a solid oval base and a short solid band at the bottom of the walls. Above that is an open diamond mesh, and the top is a neat band edged with tiny picots. Three sage-green leaf sprigs are sewn across the front.

There are only two colors: warm cream for the basket and muted sage green for the straps and leaves. The style is calm and farmhouse-simple, and it suits a neutral bathroom.

The pattern uses US crochet terms. The finished basket is about 10 in (25.4 cm) long, 4.5 in (11.4 cm) wide and 4.4 in (11.2 cm) tall, not counting the straps.

You’ll start with a racetrack oval base in single crochet, then work the walls straight up in joined rounds. The top band and picot edge are the border. Last, you make two straps and three sprigs and sew them on.

Finished Size and Construction

  • Finished size: 10 in (25.4 cm) long x 4.5 in (11.4 cm) wide x 4.4 in (11.2 cm) tall
  • Skill level: Easy-intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: US 7 (4.5 mm)
  • Number of pieces: One basket body worked in one piece. You also make 2 straps and 3 sprig appliqués (each sprig is 3 leaves and 1 stem) and sew them on.
  • Layout: Oval basket with three sprigs spaced across the front
  • Base size: 10 in x 4.5 in (25.4 cm x 11.4 cm)
  • Height before border: 3.5 in (8.9 cm)
  • Border depth (top band plus picots): 0.9 in (2.3 cm)

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton holds its shape under the rolls and copes well with bathroom humidity. Don’t use fluffy or very stretchy acrylic, because the mesh will sag.

  • Cream (main color): about 150 g / 285 m
  • Sage green (contrast): about 50 g / 95 m
  • US 7 (4.5 mm) crochet hook
  • 4 locking stitch markers
  • Tapestry needle
  • Scissors
  • Spray bottle and blocking pins
  • Optional: a box about 10 in x 4.5 in (25.4 cm x 11.4 cm) to use as a blocking form

The yarn amounts include about a 15% margin for your swatch and for differences in tension.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • BLO: back loop only
  • inc: 2 sc in the same stitch
  • st(s): stitch(es)
  • rnd(s): round(s)

Special stitch: picot. Ch 3, then sl st in the 3rd ch from the hook.

Gauge and Checkpoints

Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) in sc with the US 7 (4.5 mm) hook.

Before you start, make a swatch 20 sc wide and 20 rows tall, and measure across the middle. Firm tension is best, because the base has to carry weight without stretching.

Checkpoints:

  • After Rnd 1: about 6 in (15.2 cm) long
  • After Rnd 5: about 8 in (20.3 cm) long x 2.5 in (6.4 cm) wide
  • After Rnd 9 (base done): 10 in x 4.5 in (25.4 cm x 11.4 cm)
  • After Rnd 14 (solid band): walls about 1.1 in (2.8 cm) tall
  • After Rnd 22 (mesh): walls about 3.5 in (8.9 cm) tall
  • After Rnd 26 (border): walls about 4.4 in (11.2 cm) tall

If the base is too big: Go down half a hook size to 4.0 mm and start again. If the base is too large, the rolls slide around and the mesh pulls out of shape.

If the base is too small: Go up half a hook size to 5.0 mm. Don’t add extra rounds instead. Every wall count depends on a base edge of exactly 98 sts.

Three sage-green crocheted leaves with cable knit texture attached to a cream-colored twisted rope stem.

Base

Each base round has four sections: a curved end, a straight side, a second curved end and a second straight side. The straight sides stay at 22 sts in every round. All increases go on the curved ends, 3 per end, for 6 per round.

With cream, ch 25.

Rnd 1: 3 sc in the 2nd ch from the hook (end A). Sc in the next 22 ch, then 3 sc in the last ch (end B). Turn to work along the other side of the foundation ch and sc in the next 22 ch. Join with a sl st to the first sc. (50 sts: 3 + 22 + 3 + 22)

Put a marker in the first st of each section. Move the markers up as you work.

Rnd 2: Ch 1 (it does not count as a st, here or in later rounds). 2 sc in each of the next 3 sts, sc in the next 22 sts; repeat from * once. Join. (56 sts)*

Rnd 3: Ch 1. [Sc in next st, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (62 sts)*

Rnd 4: Ch 1. [Sc in next 2 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (68 sts)*

Rnd 5: Ch 1. [Sc in next 3 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (74 sts)*

Rnd 6: Ch 1. [Sc in next 4 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (80 sts)*

Rnd 7: Ch 1. [Sc in next 5 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (86 sts)*

Rnd 8: Ch 1. [Sc in next 6 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (92 sts)*

Rnd 9: Ch 1. [Sc in next 7 sts, inc] 3 times, sc in next 22 sts; repeat from * once. Join. (98 sts: 27 on each curved end + 22 on each straight side)*

Check the count: 27 + 22 + 27 + 22 = 98. At 4 sts per inch, that’s 24.5 in (62.2 cm) around, which matches a 10 in x 4.5 in (25.4 cm x 11.4 cm) oval. Measure the base flat before you go on.

Walls: Solid Bottom Band

Rnd 10: Ch 1, sc in the BLO of each st around. Join. (98 sts)

The unused front loops leave a crisp ridge, and the wall turns up at a clean right angle.

Rnds 11–14: Ch 1, sc in each st around. Join. (98 sts)

This solid band is about 1.1 in (2.8 cm) tall. It stiffens the bottom of the basket and gives the sprig stems a firm place to sit.

Walls: Diamond Mesh

Each mesh round has 49 chain loops. Each loop covers 2 sts of Rnd 14 (98 ÷ 2 = 49). Every round ends with ch 2 and a dc, which closes the last loop and leaves your hook in the center of a loop. That stops the diamonds from slanting.

Rnd 15: Ch 1, sc in the first st. Ch 5, skip the next st, sc in the next st; repeat from * 47 more times. Ch 2, skip the last st, dc in the first sc. (49 loops; the ch-2 + dc is the 49th loop)*

Rnds 16–22: Ch 1, sc around the post of the joining dc. Ch 5, sc in the next ch-5 loop; repeat from * 47 more times. Ch 2, dc in the first sc. (49 loops)*

The 8 mesh rounds add about 2.4 in (6.1 cm). The walls should now be about 3.5 in (8.9 cm) tall. Let the mesh hang naturally when you measure.

Border: Top Band and Picot Edge

Border gauge: The border goes back to 4 sc per inch, 98 sc around. The rim has the same count as the base edge, so the walls stay straight instead of flaring out or pulling in.

Rnd 23 (conversion round): Ch 1, sc around the post of the joining dc. 2 sc in the next ch-5 loop; repeat from * 47 more times. Sc around the joining dc again, which finishes that loop’s 2 sc. Join. (49 loops x 2 sc = 98 sc)*

Each loop covered 2 base stitches, so it gets exactly 2 sc back. Re-mark the four sections (27, 22, 27, 22) so they line up with the base sections below.

Rnds 24–25: Ch 1, sc in each st around. Join. (98 sts)

Rnd 26 (picot edge): Ch 1. Sc in the next 2 sts, picot; repeat from * 48 more times. Join and fasten off. (98 sc + 49 picots)*

Counting from the first st of end A, there are 13 picots on end A, 11 on the first straight side, 14 on end B and 11 on the second straight side (13 + 11 + 14 + 11 = 49). You won’t see the one-picot difference between the ends after blocking.

The border is 0.9 in (2.3 cm) deep: 0.7 in (1.8 cm) of solid rounds plus 0.2 in (0.5 cm) of picots. The total wall height is 1.1 + 2.4 + 0.7 + 0.2 = 4.4 in (11.2 cm).

Straps (Make 2)

With sage, ch 5.

Row 1: Sc in the 2nd ch from the hook and in each ch across. Turn. (4 sts)

Rows 2–54: Ch 1, sc in the BLO of each st across. Turn. (4 sts)

Fasten off and leave a 12 in (30.5 cm) tail. Each strap is 1 in (2.5 cm) wide and 12 in (30.5 cm) long. Working in the back loop makes the strap ridged and firm.

Sprig Appliqués (Make 3)

Each sprig has 1 stem and 3 leaves. You need 9 leaves and 3 stems in total, all in sage.

Leaf (make 9): Ch 6. Sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, hdc in the next ch and sc in the last ch. Ch 2 for the tip. Then work along the other side of the foundation ch: sc, hdc, dc, hdc, sc. Join with a sl st. (10 sts + ch-2 tip)

Fasten off and leave an 8 in (20.3 cm) tail. Each leaf is about 1.2 in (3.0 cm) long and 0.8 in (2.0 cm) wide. The foundation chain forms a center vein.

Stem (make 3): Ch 7, then sl st in the 2nd ch from the hook and in each ch across. (6 sl sts) The stem is about 1.25 in (3.2 cm) long.

Assemble each sprig: Sew one leaf to the top of the stem, pointing straight up. Sew the other two leaves at the stem’s midpoint, one on each side, angled up at about 45 degrees. A finished sprig is about 2 in (5.1 cm) wide and 2.3 in (5.8 cm) tall.

Attaching the Sprigs and Straps

Sprigs: Choose one straight side as the front. Center the middle sprig between sts 11 and 12 of that side, with the bottom of the stem on top of the solid band (Rnd 14). Place the other two sprigs 3 in (7.6 cm) to the left and right, measured center to center. They’ll curve slightly onto the ends. Sew each one to the mesh strands with small hidden stitches.

Straps: Find the 14th st of each curved end’s 27 sts. Lay both ends of one strap side by side inside the top band at that point, overlapping the band by 0.75 in (1.9 cm). Whipstitch them in place through Rnds 23–25. This makes a 10.5 in (26.7 cm) loop that rises about 5.25 in (13.3 cm) above the rim. Attach the second strap to the other end the same way.

Final Blocking

  1. Weave in all the ends inside the solid bands, never through the mesh.
  2. Spray the basket until it’s evenly damp.
  3. Put it over your blocking form, or over two toilet rolls with a washcloth between them.
  4. Ease the walls straight and open each diamond so they’re all the same size.
  5. Pin the picots so they point outward.
  6. Press each leaf flat and shape the tips into points.
  7. Pin the straps out to 12 in (30.5 cm) if they curl.
  8. Let it dry completely, usually about 24 hours.

Final Quality-Control Checklist

  • The base is 10 in x 4.5 in (25.4 cm x 11.4 cm) and lies flat.
  • The base edge and the top band both have 98 sts.
  • The walls are 4.4 in (11.2 cm) tall all the way around.
  • Each mesh round has 49 even loops, and the diamonds line up vertically.
  • There are 49 evenly spaced picots on the rim.
  • The three sprigs are 3 in (7.6 cm) apart and their stems touch the solid band.
  • The straps are centered on each end and are the same length.
  • No ends or sewing show on the outside.

Troubleshooting

The base cups or ruffles: If it cups, your increases are too tight. If it ruffles, they’re too loose. Rework the ends with even tension.

The mesh slants: You probably ended a round with a sl st. Always finish each mesh round with ch 2 and a dc.

The rim flares: Recount Rnd 23. It must have exactly 98 sc.

The basket tips forward: The straps aren’t centered. Move them to the 14th st of each end.

The leaves curl: Steam them lightly and pin them flat to dry.

Care

Hand wash in cool water with mild soap. Press out the water in a towel, reshape the basket and dry it flat over a box.

Crocheted cream basket with green leaf details holding toilet paper, hanging from wooden rod in bright bathroom.

Final Notes

Each measurement sets up the next one. Your gauge gives the 98-st base edge, which gives 49 mesh loops, and those 49 loops convert back to 98 sts at the rim. If the base is 10 in x 4.5 in (25.4 cm x 11.4 cm) and both edges count 98, the rest follows: 3.5 in (8.9 cm) of wall, 0.9 in (2.3 cm) of border and a finished height of 4.4 in (11.2 cm).

Happy crocheting!

Leave a Comment