Rosy Diamond Letter V Keychain Crochet Pattern

This little letter V keychain is a sweet personalized accessory with a vintage feel. A dusty rose background is broken up by soft sage green and cream diamonds that run down both arms and meet at the point. Two tiny cream daisies with yellow centers and leafy green sprigs finish it off.

The pattern uses US crochet terms throughout. The finished letter measures about 4.6 in (11.7 cm) wide across the top and 4.2 in (10.7 cm) tall, including the border. That size feels substantial on a bag handle but is still light enough for a key ring.

You’ll work the V flat in rows of single crochet from the bottom point upward. You increase at both edges so the base widens, then split the work and crochet each arm separately so both lean outward. The diamonds are worked in intarsia. One round of rose single crochet tidies all the edges, then you add a crocheted hanging loop, sew on the flowers and leaves, and attach the hardware.

Because it’s one main piece, there’s no joining. You need one careful gauge swatch, a few measurement checkpoints, and some patience with color changes.

Finished Size and Construction

  • Finished size: 4.6 in (11.7 cm) wide x 4.2 in (10.7 cm) tall
  • Skill level: Intermediate (intarsia color changes, simple shaping)
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (#2) cotton
  • Hook: 2.75 mm (US C/2)
  • Number of pieces: 1 main letter, plus 2 flower and 5 leaf appliqués
  • Layout: Single letter, no joining
  • Piece size before border: 4.3 in (10.9 cm) wide x 3.9 in (9.9 cm) tall
  • Border depth: about 0.15 in (0.4 cm) on every edge
  • Arm width: 8 stitches, about 1.3 in (3.3 cm) measured straight across

Materials

Choose a smooth, mercerized sport-weight cotton. Cotton keeps the stitches crisp and the diamonds sharp, and it stands up to daily handling far better than acrylic. A yarn of about 150 m per 50 g gives the right density.

  • Dusty rose (main color): 10 g, about 30 m
  • Cream: 4 g, about 12 m
  • Sage green: 4 g, about 12 m
  • Yellow: 1 g, about 3 m

All quantities include a comfortable margin for gauge swatches and weaving in ends.

Tools:
– 2.75 mm (US C/2) crochet hook
– Tapestry needle
– 4–6 small yarn bobbins (or wound butterflies)
– Stitch markers
– Scissors
– Pins and a foam blocking mat
– Gold split key ring, 1 in (2.5 cm) diameter
– Gold chain with jump rings, about 1.5 in (3.8 cm) long
– Small pliers for opening jump rings

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together (decrease)
  • MR – magic ring
  • RS / WS – right side / wrong side
  • st(s) – stitch(es)

Special technique – intarsia color change: Work the last stitch before a new color until 2 loops remain on the hook. Yarn over with the new color and pull through. Drop the old color to the WS. Each color block has its own bobbin, so you never carry yarn across the back.

Reading the color layouts: Each colorwork row is written as rose / motif / rose stitch counts, for example “3 rose, 2 cream, 3 rose.” On shaping rows, a “2 sc in one st” increase counts as 2 stitches and an sc2tog counts as 1 stitch.

Gauge and Checkpoints

Gauge: 6 sc and 7 rows = 1 in (2.5 cm) in sc worked flat.

Before you start the letter, make a test swatch. Ch 13, work 12 sc per row for 14 rows, and measure. It should be 2 in (5.1 cm) square. Tight gauge is essential: loose stitches let the background show through the diamonds and make the keychain floppy.

Checkpoints:
– After Row 12: 16 sts wide, about 2.7 in (6.9 cm) across the top, and 1.7 in (4.3 cm) tall.
– Each arm: 8 sts, about 1.3 in (3.3 cm) wide measured straight across.
– After Row 27: 4.3 in (10.9 cm) wide across both arm tops and 3.9 in (9.9 cm) tall.
– After the border: 4.6 in (11.7 cm) x 4.2 in (10.7 cm).

If your piece is too big, go down to a 2.5 mm hook. If it’s too small, go up to a 3 mm hook. Change the hook rather than your tension, because forcing tension changes makes color changes uneven.

Close-up of a pink crocheted flower with white center and green leaves on a wooden surface.

Main Letter

With rose, ch 9.

Base Section

Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (8 sts)

From Row 2 on, every row starts with ch 1 (which does not count as a st) and ends with “turn.”

Row 2: 3 rose, 2 cream, 3 rose. (8 sts)
Row 3 (increase): 2 sc in first st, then 1 rose (3 rose in total), 4 cream, then 1 rose and 2 sc in last st (3 rose in total). (10 sts)
Row 4: 2 rose, 6 cream, 2 rose. (10 sts)
Row 5: 3 rose, 4 cream, 3 rose. (10 sts)
Row 6 (increase): 2 sc in first st, 3 rose, 2 cream, 3 rose, 2 sc in last st. Read across, that’s 5 rose, 2 cream, 5 rose. (12 sts)

Fasten off cream. This completes the cream diamond at the point.

Row 7: 5 rose, 2 green, 5 rose. (12 sts)
Row 8: 4 rose, 4 green, 4 rose. (12 sts)
Row 9 (increase): 2 sc in first st, 2 rose, 6 green, 2 rose, 2 sc in last st. Read across, that’s 4 rose, 6 green, 4 rose. (14 sts)
Row 10: 5 rose, 4 green, 5 rose. (14 sts)
Row 11: 6 rose, 2 green, 6 rose. (14 sts)

Fasten off green. This completes the center green diamond.

Row 12 (increase, WS): 2 sc in first st, sc in next 12 sts, 2 sc in last st, turn. (16 sts, all rose)

Measure now: 2.7 in (6.9 cm) wide and 1.7 in (4.3 cm) tall.

First Arm

The first arm is the right-hand arm when the RS faces you. Its outer edge is at the start of RS rows, and its inner edge (the notch) is at the end of RS rows.

Row 13 (RS): Ch 1, sc in next 8 sts, turn. (8 sts) Leave the remaining 8 sts unworked.

Row 14: 3 rose, 2 cream, 3 rose. (8 sts)
Row 15 (shift, RS): 2 sc in first st (outer edge), 4 cream, 1 rose, sc2tog (inner edge). Read across, that’s 2 rose, 4 cream, 2 rose. (8 sts)
Row 16: 1 rose, 6 cream, 1 rose. (8 sts)
Row 17: 2 rose, 4 cream, 2 rose. (8 sts)
Row 18 (shift, WS): sc2tog (inner edge), 1 rose, 2 cream, 2 rose, 2 sc in last st (outer edge). Read across, that’s 3 rose, 2 cream, 3 rose. (8 sts)

Fasten off cream.

Rows 19–20: Sc in each st across in rose. (8 sts)
Row 21 (shift, RS): 2 sc in first st, 1 rose, 2 green, 1 rose, sc2tog. Read across, that’s 3 rose, 2 green, 3 rose. (8 sts)
Row 22: 2 rose, 4 green, 2 rose. (8 sts)
Row 23: 1 rose, 6 green, 1 rose. (8 sts)
Row 24 (shift, WS): sc2tog, 4 green, 2 sc in last st. Read across, that’s 2 rose, 4 green, 2 rose. (8 sts)
Row 25: 3 rose, 2 green, 3 rose. (8 sts)

Fasten off green.

Row 26: Sc in each st across. (8 sts)
Row 27 (shift, RS): 2 sc in first st, sc in next 5 sts, sc2tog. (8 sts)

Fasten off rose, leaving a 6 in (15.2 cm) tail.

Over the arm rows, the outer edge gained 5 sts and the inner edge lost 5 sts. The arm stays 8 sts wide but has moved 5 sts outward.

Second Arm

For the second arm, the inner edge is at the start of RS rows and the outer edge is at the end.

Row 13 (RS): Join rose in the first unworked st of Row 12, next to the first arm. Ch 1, sc in the same st and in each of the next 7 sts, turn. (8 sts)

Work Rows 14–27 with the same color layouts as the first arm, but mirror the shaping:
– RS shift rows (15, 21, 27): sc2tog at the start, 2 sc in the last st.
– WS shift rows (18, 24): 2 sc in the first st, sc2tog at the end.

Each row is still 8 sts. Fasten off, leaving a 6 in (15.2 cm) tail.

Checkpoint: The two arm tops together span 26 sts (8 + 10 notch gap + 8), about 4.3 in (10.9 cm). The total height is 27 rows, about 3.9 in (9.9 cm).

Flowers (make 2)

Rnd 1: With yellow, make an MR. Work 5 sc in the ring, sl st to the first sc. (5 sts) Fasten off.

Rnd 2: Join cream in any sc. In each st around, work (sl st, ch 2, 2 dc, ch 2, sl st). (5 petals) Fasten off, leaving an 8 in (20.3 cm) tail for sewing.

Each flower measures about 0.9 in (2.3 cm) across.

Leaves (make 5)

With green, ch 6. Starting in the 2nd ch from hook, work: sl st, sc, hdc, sc, sl st. (5 sts)

Ch 1 for the tip. Rotate and work along the opposite side of the foundation chain: sl st, sc, hdc, sc, sl st. (5 sts, 10 sts total)

Fasten off, leaving a tail for sewing. Each leaf is about 0.8 in (2.0 cm) long.

Border

Border gauge: Work 1 sc in each stitch along the top and bottom edges and 1 sc in each row end along the slanted edges.

With RS facing, join rose in the first foundation st at the bottom right of the point. Ch 1 and work as follows.

Rnd 1:
– Bottom edge: 3 sc in the first st (corner), sc in the next 6 sts, 3 sc in the last st (corner). (12 sts)
– Outer edge of the second arm: 1 sc in each of the 27 row ends. (27 sts)
– Top of the second arm: 3 sc in the first st, sc in the next 6 sts, 3 sc in the last st. (12 sts)
– Inner edge of the second arm: 1 sc in each of rows 27–14, which is 14 row ends. (14 sts)
– Notch: sc2tog over the Row 13 end of the second arm and the Row 13 end of the first arm. (1 st)
– Inner edge of the first arm: 1 sc in each of rows 14–27, which is 14 row ends. (14 sts)
– Top of the first arm: 3 sc in the first st, sc in the next 6 sts, 3 sc in the last st. (12 sts)
– Outer edge of the first arm: 1 sc in each of the 27 row ends. (27 sts)

Sl st to the first sc. Total: 12 + 27 + 12 + 14 + 1 + 14 + 12 + 27 = 119 sts.

Check: The edges have 107 base stitches (8 + 27 + 8 + 15 + 15 – 1 notch decrease + 8 + 27 – 1 counted once in the notch sc2tog adjustment shown above), plus 2 extra stitches at each of the 6 outer corners (12 sts). That gives 119 sts.

Why the math works: Each slanted edge moves 1 st sideways every 3 rows. Over those 3 rows the edge measures about 0.46 in (1.2 cm), so 1 sc per row end gives about 6.5 border sts per inch, which is very close to the 6-st gauge. The border lies flat without ruffling or pulling. The corner increases (3 sc) keep the convex corners square. The single sc2tog at the notch closes the inner corner neatly.

Hanging Loop

Don’t fasten off after the border. Sl st across to the notch sc2tog stitch.

  • Ch 18, then sl st in the 11th ch from hook to form a ring of 10 ch.
  • Work 14 sc into the ring and sl st to the first sc.
  • Sl st in each of the remaining 7 stem chs, then sl st into the notch st.

Fasten off and weave in the end. The ring should sit about level with the tops of the arms.

Final Blocking

  1. Weave in all ends on the WS, staying inside blocks of the same color.
  2. Lay the letter WS up on a blocking mat.
  3. Pin it to 4.6 in (11.7 cm) wide and 4.2 in (10.7 cm) tall. Keep the arm tops level and the arm widths equal.
  4. Mist it lightly with water or steam it from above. Don’t press the iron onto the stitches.
  5. Let it dry completely, at least 4 hours.
  6. Sew the first flower near the outer top corner of the right arm, with 2 leaves tucked beneath it.
  7. Sew the second flower over the lower left edge, beside the bottom cream diamond, with 3 leaves fanned around it.
  8. Attach the chain to the hanging ring with a jump ring, then add the split key ring.

Final Quality-Control Checklist

  • The bottom edge is 8 sts and each arm is 8 sts on every row.
  • Each of the 6 diamonds is symmetrical (2-4-6-4-2 shape).
  • No rose is showing through the cream or green blocks.
  • The border round has 119 sts and lies flat.
  • The finished piece measures 4.6 in (11.7 cm) x 4.2 in (10.7 cm).
  • The flowers are sewn securely through the petals and centers.
  • The hanging loop is firm and the jump rings are fully closed.

Troubleshooting

  • Arms lean unevenly: Check that each shift row has exactly one increase and one sc2tog, on the correct edges.
  • The diamonds look slanted: This is normal in sc rows. Blocking straightens it, and so does working the color change on the last yarn over of the previous stitch.
  • Holes at color changes: Twist the old and new yarns once on the WS before you continue.
  • The border ruffles: Your hook is too big, or you’ve worked extra sts at the row ends. Check the count against 119.
  • The border cups: Check that each outer corner has 3 sc.
  • The keychain is floppy: Go down a hook size, or block with a light fabric stiffener.

Care

Hand wash in cool water with mild soap, press out the moisture in a towel, and dry flat. Remove the metal hardware before washing.

Pink-and-white crocheted heart charm with daisy flowers hanging from a cream fabric tote in natural light.

Final Notes

The whole design comes down to one measurement chain. The 6-st, 7-row gauge gives a 1.3 in (3.3 cm) bottom edge and a 2.7 in (6.9 cm) base after Row 12. The 8-st arms then shift outward to reach 4.3 in (10.9 cm) x 3.9 in (9.9 cm) after Row 27. The 119-st border brings the letter to 4.6 in (11.7 cm) x 4.2 in (10.7 cm). Check your gauge at each stage, and your V will come out tidy and well shaped.

Happy crocheting!

Leave a Comment