Seafoam Ginkgo Hanging Basket Crochet Pattern

These little hanging baskets put bathroom storage on display. Each one is a soft rectangular tub with a sturdy cream base, a lacy band of mint ginkgo fans and a rim of small cream shells. A narrow strap loops over a towel bar, so a spare toilet roll is always within reach.

The look is calm and vintage: cream cotton paired with a soft seafoam mint. The fans open upward like ginkgo leaves, and pointed chain arches between them make a light lattice. The roll shows through the lace.

This pattern uses US crochet terms. Each finished basket measures 6.5 in (16.5 cm) wide, 5.5 in (14.0 cm) deep and 5 in (12.7 cm) tall, not counting the strap. You’ll make two identical baskets. They hang side by side but stay separate.

Each basket is worked in five steps:

  1. A flat single-crochet rectangle for the base.
  2. One edging round that rounds the corners.
  3. Back-loop single crochet to turn the wall up, followed by a cream band.
  4. Five rounds of mint fan lace.
  5. A cream scalloped border, then a separate strap sewn inside the back wall.

Finished Size and Construction

  • Finished basket: 6.5 in (16.5 cm) wide × 5.5 in (14.0 cm) deep × 5 in (12.7 cm) tall
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 2 baskets plus 2 straps (4 pieces in total)
  • Layout: 2 baskets hanging side by side, not joined
  • Base size: 6 in × 5 in (15.2 cm × 12.7 cm) before the edging, and 6.5 in × 5.5 in (16.5 cm × 14.0 cm) after it
  • Size before border: 4 in (10.2 cm) tall
  • Border depth: 1 in (2.5 cm)
  • Strap: 1 in (2.5 cm) wide × 9 in (22.9 cm) long

Materials

Use a smooth, mercerized or matte worsted cotton. Cotton holds its shape, survives a damp bathroom and shows the fan texture clearly. Avoid acrylic, which makes the walls slump.

  • Cream (Color A): 180 g / about 280 m, for the base, lower wall band, border and straps
  • Seafoam mint (Color B): 70 g / about 108 m, for the fan lace bands

These quantities cover both baskets and include a margin of about 15–20% for your gauge swatch and tension differences.

Tools:

  • 4.5 mm (US 7) crochet hook
  • Tapestry needle
  • 4 stitch markers
  • Scissors
  • Measuring tape
  • Rust-proof pins and a blocking mat
  • A toilet roll or a 4.5 in (11.4 cm) wide jar to use as a blocking form

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • tr – treble crochet
  • dtr – double treble crochet (yarn over 3 times, then work off the loops in pairs)
  • BLO – back loop only
  • sk – skip
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • Rnd – round

Special stitch – Scallop: work 5 dc in the same stitch.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc. That works out to 4 sc and 4.5 rows per inch (2.5 cm).

Make one complete basket before starting the second, and measure at each of these checkpoints:

  1. After base Row 22: 6 in × 5 in (15.2 cm × 12.7 cm)
  2. After Rnd 1: 6.5 in × 5.5 in (16.5 cm × 14.0 cm), with a perimeter of 24 in (61.0 cm)
  3. After Rnd 5: the cream wall band stands 1 in (2.5 cm) tall
  4. After Rnd 10: the wall is 4 in (10.2 cm) tall
  5. After the border: the wall is 5 in (12.7 cm) tall

If your piece is too big: go down to a 4 mm hook. A loose base makes the basket sag under a roll.

If your piece is too small: go up to a 5 mm hook. Check that a roll 4.5 in (11.4 cm) wide fits inside with a little room to spare.

Close-up of crocheted chevrons in mint green and cream yarn forming a geometric open pattern.

Base (Color A)

Ch 25.

Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (24 sc)

Rows 2–22: Ch 1, sc in each st across. Turn. (24 sc)

Checkpoint: 6 in × 5 in (15.2 cm × 12.7 cm).

Rnd 1 (base edging): Don’t turn. Ch 1 and work around the rectangle as follows:

  1. First long side: 2 sc in the first st, sc in the next 22 sts, 2 sc in the last st. (26 sc)
  2. First short side: Work 22 sc down the row ends, 1 per row.
  3. Second long side: Along the foundation ch, 2 sc in the first ch, sc in the next 22 ch, 2 sc in the last ch. (26 sc)
  4. Second short side: Work 22 sc up the row ends.

Join with a sl st to the first sc.

Count: 26 + 22 + 26 + 22 = 96 sc. Each long side’s 26 includes its 2 corner increases, so no corner stitches are counted twice.

Place a marker in the first and last st of each long side.

Checkpoint: 6.5 in × 5.5 in (16.5 cm × 14.0 cm), with a perimeter of 24 in (61.0 cm). At 4 sc per inch, 96 sc ÷ 4 = 24 in, so the count matches the measurement.

Wall (Color A, Then Color B)

The wall is worked in joined rounds without turning.

Rnd 2: Ch 1, sc in BLO of each st around. Join. (96 sc) The unworked front loops make a crisp fold, and the wall begins to stand up.

Rnds 3–5: Ch 1, sc in each st around. Join. (96 sc)

Checkpoint: the cream band is 1 in (2.5 cm) tall. On the last join of Rnd 5, finish the sl st with Color B and fasten off Color A.

From here, the wall is an 8-repeat pattern. Each repeat covers 12 stitches, and 96 ÷ 12 = 8.

Rnd 6 (stems): Ch 1, sc in the same st, then repeat around: ch 5, sk 5, dc in next st, ch 5, sk 5, sc in next st. On the last repeat, end with ch 5, sk 5, and join to the first sc.

Count: 8 sc, 8 dc and 16 ch-5 sps. Each repeat uses 1 + 5 + 1 + 5 = 12 sts.

Rnd 7 (fan buds): Ch 1, sc in the first sc, then repeat around: ch 4, (dc, ch 1, dc, ch 1, dc) in next dc, ch 4, sc in next sc. On the last repeat, omit the final sc and join to the first sc.

Count: 8 sc, 24 dc (3 per fan), 16 ch-1 sps and 16 ch-4 sps.

Rnd 8 (fans widen): Ch 1, sc in the first sc, then repeat around: ch 3, dc in next dc, ch 1, dc in next ch-1 sp, ch 1, dc in next dc, ch 1, dc in next ch-1 sp, ch 1, dc in next dc, ch 3, sc in next sc. On the last repeat, omit the final sc and join.

Count: 8 sc and 40 dc (5 per fan), with 4 ch-1 sps per fan.

Rnd 9 (fans open): Ch 1, sc in the first sc, then repeat around: ch 2, tr in next dc, [ch 1, tr in next ch-1 sp, ch 1, tr in next dc] 4 times, ch 2, sc in next sc. On the last repeat, omit the final sc and join.

Count: 8 sc and 72 tr (9 per fan), with 8 ch-1 sps per fan. The 9 ribbed trebles fan out from the narrow stem, which gives the ginkgo shape.

Rnd 10 (lattice arches): Ch 5 in the joining sc (this counts as the first dtr), then repeat around: ch 3, sc in the 1st tr of the fan, [ch 3, sk 1 tr, sc in next tr] 4 times, ch 3, dtr in next sc. On the last repeat, omit the final dtr and join to the top of the beginning ch-5.

Count: 8 dtr, 40 sc (on the 1st, 3rd, 5th, 7th and 9th tr of each fan) and 48 ch-3 sps (6 per repeat). Each dtr rises from the low point between two fans, so the ch-3 spaces on either side form pointed arches and level off the top edge.

Fasten off Color B.

Checkpoint: the wall is 4 in (10.2 cm) tall. The mint section is about 3 in (7.6 cm) of that.

Make All Pieces

Make 2 baskets and 2 straps in total:

  • Color A per basket: base, Rnds 1–5, border and 1 strap
  • Color B per basket: Rnds 6–10

The baskets hang side by side and are not joined:

==========[ towel bar ]==========
     | strap |        | strap |
  [ Basket 1 ]    [ Basket 2 ]

Leave about 0.5 in (1.3 cm) between the baskets on the bar.

Strap and Assembly

Each strap is worked flat in Color A.

Strap: Ch 5.

  • Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (4 sc)
  • Rows 2–40: Ch 1, sc in each st across. Turn. (4 sc)

The finished strap is 1 in (2.5 cm) wide × 9 in (22.9 cm) long, since 40 rows ÷ 4.5 rows per inch is about 9 in. Fasten off and leave a 12 in (30.5 cm) tail.

Attaching the strap: The baskets aren’t joined to each other. The only joining is strap to basket, worked stitch to stitch.

  1. Fold the strap in half so the two ends overlap by 1 in (2.5 cm).
  2. Center the overlapped ends on the inside of the back long wall. The back wall has 26 sts; place the 4 strap sts over sts 12–15 so there are 11 sts on each side.
  3. Line up the top edge of the strap with Rnd 12.
  4. Whipstitch each strap stitch to the matching wall stitch, through both layers, for 1 in (2.5 cm) down the wall. Work across the bottom edge of the strap and then back up.

Keep your whipstitches firm but not tight. Pulling too hard puckers the lace and tilts the rim. The loop should rise about 3.5 in (8.9 cm) above the rim.

Checkpoint: the basket hangs level, and the rim doesn’t fold forward when a roll is inside.

Border (Color A)

Border gauge: keep 4 sc per inch, so the rim measures the same 24 in (61.0 cm) as the base. Join Color A in any ch-3 sp of Rnd 10.

Rnd 11 (conversion): Ch 1, 2 sc in each ch-3 sp around. Don’t work into the dtr or sc tops. Join.

Count: 48 sps × 2 sc = 96 sc, with nothing added beyond that. Distribute the stitches as 26 sc along each long side and 22 sc along each short side, matching Rnd 1.

Rnd 12: Ch 1, sc in each st around. Join. (26 / 22 / 26 / 22 = 96 sc)

Rnd 13 (scallops): Ch 1, sc in the first st, then repeat around: sk 2, Scallop in next st, sk 2, sc in next st. On the last repeat, end with sk 2, Scallop, sk 2, and join to the first sc.

Count: 16 Scallops (80 dc) and 16 sc. Each repeat uses 6 sts, and 96 ÷ 6 = 16. The scallops wrap smoothly around the rounded corners. Each side holds about 4 scallops.

Why the math works: The border holds the same 96 stitches as the base, at the same 4 sc per inch. The rim therefore matches the 24 in (61.0 cm) base perimeter, and the walls stand straight instead of flaring or pulling in. The border adds 1 in (2.5 cm), which brings the wall from 4 in (10.2 cm) to 5 in (12.7 cm).

Weave in all ends inside the base band, where they won’t show through the lace.

Final Blocking

  1. Soak each basket in cool water for 10 minutes. Press out the water; don’t wring.
  2. Roll the basket in a towel to remove the excess.
  3. Slip a toilet roll or a 4.5 in (11.4 cm) jar inside as a form. Pad the corners with a folded washcloth so the base reaches 6.5 in × 5.5 in (16.5 cm × 14.0 cm).
  4. Ease each fan open and pin the dtr points so the arches are pointed and even.
  5. Pin each scallop into a neat half-circle.
  6. Check that the wall is 5 in (12.7 cm) tall all around.
  7. Pin the straps flat at 1 in × 9 in (2.5 cm × 22.9 cm).
  8. Let everything dry completely, about 24 hours, before hanging.

Final Quality-Control Checklist

  • [ ] The base measures 6.5 in × 5.5 in (16.5 cm × 14.0 cm).
  • [ ] Rnds 1–12 each have exactly 96 sts (26 / 22 / 26 / 22).
  • [ ] There are 8 fans per basket, each with 9 tr.
  • [ ] There are 16 even scallops around the rim.
  • [ ] The wall is 5 in (12.7 cm) tall.
  • [ ] The strap is centered and sewn securely over 1 in (2.5 cm).
  • [ ] Both baskets match in size and hang level.
  • [ ] All ends are woven into the cream band.

Troubleshooting

The wall flares outward: The border is too loose. Redo Rnd 11 with a smaller hook, or work 7 sc in every 4 sps instead of 8.

The wall pulls inward: The mint chains are too tight. Loosen your chains, or go up half a hook size for Rnds 6–10.

The fan count is off: Recount Rnd 5. You need exactly 96 sts for 8 repeats of 12.

The fans lean sideways: Make sure each Rnd 7 bud sits in a dc, not in a ch-5 space.

The basket tips forward: Sew the strap lower, or attach it over 1.5 in (3.8 cm) instead of 1 in.

The base is floppy: Work the base with a hook 0.5 mm smaller.

Care

Hand wash in cool water and lay the baskets flat to dry over a form. Avoid tumble drying, which can shrink cotton and distort the lace.

Crocheted toilet paper holders in cream and sage green with lace leaf motifs displayed on a brass bathroom rod.

Final Notes

Every measurement in this pattern builds on the one before it:

  1. The 4 sc per inch gauge gives a base of 6 in × 5 in (15.2 cm × 12.7 cm).
  2. The edging round brings the base to 6.5 in × 5.5 in (16.5 cm × 14.0 cm) and 96 sts.
  3. Those 96 sts hold steady through the cream band and divide into 8 mint fan repeats.
  4. The fan rounds return to the same 96 sts at the border, which brings the basket to 5 in (12.7 cm) tall.

Measure at each checkpoint and both baskets will match. Happy crocheting!

Leave a Comment