This two-tier hanging holder pairs two small lace baskets with a simple sage strap, a wooden ring, and two wooden dowels. Each basket has a solid sage-green base and a short sage wall. Above that are cream pineapple lace sides with sage fern stems between the pineapples, finished with a cream scalloped rim with picots.
The look is soft and slightly vintage, in sage green and cream. Hang it from a towel hook and each basket holds one standard toilet roll. The roll sits inside and stands taller than the rim, so the lace frames it.
All instructions use US crochet terms. Each finished basket measures 5.25 in (13.3 cm) across the base and 3.75 in (9.5 cm) tall. The assembled holder hangs about 18 in (45.7 cm) from the top of the ring to the bottom of the lower basket.
You crochet each basket from the bottom up in joined rounds: a flat single crochet circle, a short wall, eight lace rounds, and a two-round scalloped border. Then you surface-crochet sage fern stems onto the lace. One long strap folds over the ring, the dowels slide through buttonholes in the strap, and the baskets are sewn on.
Finished Size and Construction
- Finished size (each basket): 5.25 in (13.3 cm) base diameter, 3.75 in (9.5 cm) tall
- Finished size (assembled): about 18 in (45.7 cm) long
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: DK (weight 3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 3 crocheted pieces (2 baskets, 1 strap) plus a ring and 2 dowels
- Layout: 2 baskets hung one above the other
- Piece size: strap 34 in (86.4 cm) long and 0.6 in (1.5 cm) wide
- Basket height before border: 3.15 in (8.0 cm)
- Border depth: 0.6 in (1.5 cm)
Materials
Choose a smooth, mercerized or combed DK cotton, about 120 m per 50 g. Cotton holds its shape, shows the lace stitches clearly, and copes with bathroom humidity. Soft acrylic is too floppy for these baskets.
- Sage green: 100 g, about 240 m (262 yd), for the bases, walls, fern stems, and strap
- Cream: 100 g, about 240 m (262 yd), for the lace sides and borders
These quantities include a safety margin. The finished holder uses about 80 g of sage and about 70 g of cream.
Tools and hardware:
- 3.5 mm (E-4) crochet hook
- Wooden ring, 2 in (5.1 cm) across
- 2 wooden dowels, each 6.5 in (16.5 cm) long and 3/8 in (1.0 cm) thick
- Stitch markers and a tapestry needle
- Scissors and a flexible tape measure
- Rustproof pins and a blocking mat
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- BLO – back loop only
- sk – skip
- sp – space
- st(s) – stitch(es)
- rnd – round
Special stitches:
- V-st: (dc, ch 2, dc) in the stitch or space given.
- Fan: 7 dc in the stitch given.
- Picot: ch 3, sl st in the top of the dc just made.
Gauge and Checkpoints
Gauge: 20 sc and 22 rnds = 4 in (10.2 cm), worked in sc in the round.
Finish one basket, including the border, before you start the second. The basket has to hold a roll without squeezing it, so check your size at each stage.
Checkpoints:
- After Rnd 7 (42 sts): the base is 2.6 in (6.6 cm) across.
- After Rnd 14 (84 sts): the base is 5.25 in (13.3 cm) across and about 16.5 in (41.9 cm) around.
- After Rnd 17: the sage wall is 0.55 in (1.4 cm) tall.
- After Rnd 25: the basket is 3.15 in (8.0 cm) tall.
- After Rnd 27: the basket is 3.75 in (9.5 cm) tall.
If your base is too big, go down to a 3.25 mm hook. If it’s too small, go up to a 3.75 mm hook. A standard roll is about 4.5 in (11.4 cm) across, so the base must be at least 5 in (12.7 cm) across. If the base ruffles, go down a hook size for the base only. If it cups, go up one size.

Basket (Make 2)
Base (Sage)
Work in joined rounds. Join each round with a sl st to the first sc. Ch 1 at the start of each round; it does not count as a stitch.
Rnd 1: With sage, make a magic ring, 6 sc in ring. (6 sts)
Rnd 2: 2 sc in each st around. (12 sts)
Rnd 3: (Sc in next st, 2 sc in next st) 6 times. (18 sts)
Rnd 4: (Sc in next 2 sts, 2 sc in next st) 6 times. (24 sts)
Rnd 5: (Sc in next 3 sts, 2 sc in next st) 6 times. (30 sts)
Rnd 6: (Sc in next 4 sts, 2 sc in next st) 6 times. (36 sts)
Rnd 7: (Sc in next 5 sts, 2 sc in next st) 6 times. (42 sts)
Rnds 8–14: Keep increasing 6 times per round, with 1 more sc between increases each round. The total for each round is: Rnd 8 = 48 sts, Rnd 9 = 54 sts, Rnd 10 = 60 sts, Rnd 11 = 66 sts, Rnd 12 = 72 sts, Rnd 13 = 78 sts, Rnd 14 = 84 sts. For example, Rnd 14 is (sc in next 12 sts, 2 sc in next st) 6 times.
Tip: From Rnd 8 on, move the increases so they don’t stack. Start each round with about half of the plain sc. For example, Rnd 9: sc in next 3 sts, 2 sc in next st, (sc in next 7 sts, 2 sc in next st) 5 times, sc in next 4 sts. Staggering the increases keeps the base round instead of hexagonal.
Wall (Sage)
Rnd 15 (turning round): Ch 1, sc in BLO of each st around. (84 sts = 84 worked 1 per existing stitch + 0 added) The unused front loops make a crisp ridge, so the wall turns up sharply.
Rnds 16–17: Ch 1, sc in each st around. (84 sts)
Fasten off sage.
Pineapple Lace Sides (Cream)
The 84 sts split into 6 repeats of 14 sts. Each repeat has one fern column, made of stacked V-sts, and one pineapple.
Rnd 18: Join cream in any st. Ch 5 (counts as dc and ch 2), dc in same st (first V-st made), ch 2, sk next 6 sts, fan in next st, ch 2, sk next 6 sts. *V-st in next st, ch 2, sk next 6 sts, fan in next st, ch 2, sk next 6 sts; rep from * 4 more times. Sl st in 3rd ch of beginning ch-5. (6 V-sts, 6 fans; each repeat uses 1 + 6 + 1 + 6 = 14 sts)
Rnd 19: Sl st in first ch-2 sp. Ch 5, dc in same sp, ch 2, (dc in next dc of fan, ch 1) 6 times, dc in last dc of fan, ch 2. *V-st in next V-st sp, ch 2, (dc in next dc, ch 1) 6 times, dc in last dc, ch 2; rep from * 4 more times. Join. (6 V-sts; each pineapple has 7 dc and 6 ch-1 sps)
Rnd 20: Sl st in first ch-2 sp. Ch 5, dc in same sp, ch 3, sc in first ch-1 sp, (ch 3, sc in next ch-1 sp) 5 times, ch 3. *V-st in next V-st sp, ch 3, sc in first ch-1 sp, (ch 3, sc in next ch-1 sp) 5 times, ch 3; rep from * 4 more times. Join. (each pineapple has 6 sc and 5 ch-3 loops)
Rnd 21: Work as Rnd 20, but ch 4 on each side of each pineapple. Over the pineapple: sc in first loop, (ch 3, sc in next loop) 4 times. (5 sc, 4 loops per pineapple)
Rnd 22: Ch 5 on each side; sc in first loop, (ch 3, sc in next loop) 3 times. (4 sc, 3 loops per pineapple)
Rnd 23: Ch 6 on each side; sc in first loop, (ch 3, sc in next loop) 2 times. (3 sc, 2 loops per pineapple)
Rnd 24: Ch 7 on each side; sc in first loop, ch 3, sc in next loop. (2 sc, 1 tip loop per pineapple)
Rnd 25 (leveling round): Sl st in first ch-2 sp. Ch 5, dc in same sp, ch 7, sc in tip loop, ch 7. *V-st in next V-st sp, ch 7, sc in tip loop, ch 7; rep from * 4 more times. Join. (6 V-sts, 6 tip sc, 12 ch-7 sps)
The side chains get longer as each pineapple narrows, so the wall keeps the same width all the way up. Don’t fasten off; go straight to the Border section, then come back here for the fern stems.
Fern Stems (Sage, Surface Crochet)
Work the fern stems after the border. With the outside of the basket facing you, join sage with a sl st in the ch-2 sp of a Rnd 18 V-st.
*Ch 4, sl st in the top of the left-hand dc of the V-st above, ch 4, sl st back into the starting sp. Ch 4, sl st in the top of the right-hand dc of the V-st above, ch 4, sl st back into the starting sp. Ch 3, sl st in the ch-2 sp of the V-st above; rep from * 6 more times, so you end in the Rnd 25 V-st sp.
This gives 7 pairs of branches. Each branch is a double strand of chain, which makes a bold sage V. Fasten off. Repeat on all 6 columns of both baskets.
Strap (Sage, Make 1)
Foundation: Ch 171.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (170 sts)
Row 2 (buttonhole row): Ch 1, sc in next 16 sts, ch 2, sk 2, sc in next 30 sts, ch 2, sk 2, sc in next 70 sts, ch 2, sk 2, sc in next 30 sts, ch 2, sk 2, sc in last 16 sts. Turn. (16 + 2 + 30 + 2 + 70 + 2 + 30 + 2 + 16 = 170 sts, counting each ch-2 as 2 sts)
Row 3: Ch 1, sc in each sc and 2 sc in each ch-2 sp. (170 sts) Fasten off and leave long tails.
The strap is 34 in (86.4 cm) long. Measured from each end, the lower buttonhole starts at 3.2 in (8.1 cm) and the upper buttonhole starts at 9.6 in (24.4 cm). The 70-st center section is 14 in (35.6 cm) long and goes over the ring.
Make All Pieces
- Baskets: make 2. Each takes about 30 g of sage (base, wall, and stems) and about 35 g of cream.
- Strap: make 1, about 20 g of sage.
Layout (front view):
[ ring ]
/ \
==[ top basket ]== <- dowel 1 behind rim
gap 2.5 in
==[ lower basket ]== <- dowel 2 behind rim
Joining
Method: Whipstitch with the sage tails and a tapestry needle.
- Fold the strap in half over the ring. Stitch the two layers together just below the ring, through all 3 rows.
- Slide one dowel through both upper buttonholes and the other through both lower buttonholes. Each hole is about 0.4 in (1.0 cm), so the dowels fit snugly. Center each dowel so about 0.75 in (1.9 cm) sticks out past each leg.
- Line up the rim of the top basket (Rnd 26) with the upper dowel, so the dowel runs behind the back wall.
- Whipstitch each leg to the back of the basket over 3 sts of Rnd 26 and over 3 sts of Rnd 17. Space the legs 25 sts apart, which is 5 in (12.7 cm) and matches the gap between the buttonholes.
- Attach the lower basket to the lower dowel the same way. The strap ends should line up with its Rnd 15 ridge.
Stitch-to-stitch logic: Rnds 17 and 26 are solid sc rounds, so they take the weight. Never sew into lace chains.
Tension: Pull each stitch just snug. If you pull too hard, the wall puckers.
Size checkpoint: When the holder hangs, the baskets should be about 2.5 in (6.4 cm) apart and the total length about 18 in (45.7 cm).
Border
Work the border straight after Rnd 25, before the fern stems and before assembly. Since the basket is round, counts are given per pineapple repeat; there are 6 repeats around.
Border gauge: 5 sc = 1 in (2.5 cm), the same as the base.
Rnd 26: Ch 1. *Sc in first dc of V-st, 2 sc in V-st sp, sc in next dc, 5 sc in ch-7 sp, sc in tip sc, 5 sc in next ch-7 sp; rep from * around. Join. (1 + 2 + 1 + 5 + 1 + 5 = 15 sts per repeat; 90 sts total)
Rnd 27: Ch 1. *Sc in next st, sk 1, (3 dc, picot, 2 dc) in next st, sk 1, sc in next st; rep from * around. Join. (5 sts per scallop; 18 scallops, 3 per repeat) Fasten off.
Why the math works: Each repeat has 15 sts, which is exactly three 5-st scallops, and 90 ÷ 5 = 18 with nothing left over. The first scallop of each repeat lands on the V-st, so a scallop always tops each fern column. At 5 sts per inch, 90 sts is 18 in (45.7 cm), a little more than the 16.5 in (41.9 cm) base. That makes the rim flare gently to about 5.75 in (14.6 cm) across. Working only 5 sc into each ch-7 sp keeps it from ruffling.
Final Blocking
- Before assembly, soak both baskets in cool water for 10 minutes.
- Roll them in a towel and press out the water. Don’t wring them.
- Fill each basket firmly with a toilet roll wrapped in a plastic bag.
- Pull each pineapple straight so it’s centered between its fern columns.
- Pin each scallop outward so the picots point up.
- Let the baskets dry completely, about 24 hours.
- Steam the strap flat and straight, then assemble.
Final Quality-Control Checklist
- Each base is 5.25 in (13.3 cm) across and lies flat.
- Both baskets are 3.75 in (9.5 cm) tall.
- Each basket has 6 pineapples, 6 fern columns, and 18 scallops.
- Every fern column has 7 pairs of branches.
- Both dowels are centered and level.
- The legs are firmly sewn at Rnds 17 and 26.
- A roll drops in easily and stands upright.
- All ends are woven in on the inside.
Troubleshooting
- Base ruffles: Go down a hook size, and check that you’re making exactly 6 increases per round.
- Base cups: Go up a hook size for the base.
- Pineapple looks lopsided: Count the loops. Each round should have exactly one loop fewer than the round before.
- Lace is too tall: Make your chains a little tighter.
- Rim flares too much: Work Rnd 26 with a hook 0.5 mm smaller.
- Basket tips forward: Sew the legs farther toward the back of the basket.
- Dowel slides out: Add a small dot of glue inside each buttonhole.
Care
Take out the dowels and ring, then hand wash in cool water. Reshape the baskets over a roll and dry them flat.

Final Notes
Every measurement in this pattern builds on the gauge:
- 20 sc per 4 in (10.2 cm) gives an 84-st base 5.25 in (13.3 cm) across.
- The 84 sts split into six 14-st pineapple repeats, which reach 3.15 in (8.0 cm) tall.
- The border adds 15 sts per repeat, making 18 scallops and a basket 3.75 in (9.5 cm) tall.
- A 34 in (86.4 cm) strap with matched buttonholes joins both baskets into an 18 in (45.7 cm) holder.
If every checkpoint matches, the holder will come out the right size.
Happy crocheting!