Seafoam Leaf Lace Hanging Organizer Crochet Pattern

This hanging organizer is shaped like one long leaf. A white lace panel with fan motifs and a solid center vein is edged in a braided mint border. Two crescent-shaped lace pockets are sewn across the front, and a mint loop at the top tip hangs it from a hook.

The colors are crisp white lace with seafoam mint edges, which suits a bathroom or a vanity. The upper pocket cups deeply enough to hold small bottles. The lower pocket sits flatter and holds jars and short tubes.

This pattern uses US crochet terms. The finished panel measures 9.4 in (23.9 cm) wide by 15.4 in (39.1 cm) tall. Each pocket measures 9.0 in (22.9 cm) by 4.2 in (10.7 cm). With the loop, the organizer hangs 18.8 in (47.8 cm) from the hook to the bottom tip.

All the lace is filet-style mesh with fan stitches. You work the panel from the bottom up, increasing to its widest point and then decreasing to the top tip. You work the pockets from the top edge down. Each piece gets a three-round mint border, and then you sew on the pockets and the loop.

Finished Size and Construction

  • Finished size: panel 9.4 x 15.4 in (23.9 x 39.1 cm); 18.8 in (47.8 cm) tall with the loop
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: #3 light (DK) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 4 (1 leaf panel, 2 identical pockets, 1 hanging loop)
  • Layout: two pockets stacked on the front of the panel, loop at the top tip
  • Panel size before border: 8.4 x 14.4 in (21.3 x 36.6 cm)
  • Pocket size before border: 8.0 in (20.3 cm) across the top, 4.0 in (10.2 cm) across the bottom, 3.2 in (8.1 cm) tall
  • Pocket size after border: 9.0 x 4.2 in (22.9 x 10.7 cm)
  • Border depth: 0.5 in (1.3 cm) on every piece

Materials

Use a smooth DK cotton with about 115 m per 50 g. Cotton holds the lace shape and won’t stretch under the weight of bottles.

  • White (MC): 60 g, about 138 m, for the panel and the pocket lace
  • Mint (CC): 40 g, about 92 m, for the borders, the loop and sewing

Both amounts include a margin of roughly 20% for swatching and differences in tension.

Tools:
– 3.5 mm (E-4) hook
– Tapestry needle
– Rust-proof pins
– Blocking mat
– Measuring tape
– 4 stitch markers

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • rev sc – reverse single crochet (crab stitch), worked from left to right
  • sp – space
  • st(s) – stitch(es)
  • sq – square
  • MC / CC – main color / contrast color

Open square: ch 1, skip the next ch-1 sp (or ch), dc in the next dc.

Filled square: dc in the next ch-1 sp (or ch), dc in the next dc.

Fan (worked over 2 squares): skip the next ch-1 sp, 5 dc in the next dc, skip the next ch-1 sp, dc in the next dc. A fan counts as 2 squares but adds 2 sts to its row.

Rework a fan (on the next row): ch 1, dc in the 3rd dc of the fan, ch 1, dc in the next dc. This turns the fan back into 2 open squares.

Increase (inc) at the start of a row: ch 4 (counts as dc and ch 1), dc in the first dc.

Increase (inc) at the end of a row: ch 1, skip the last ch-1 sp, (dc, ch 1, dc) in the last st. This closes the last square and adds a new one.

Decrease (dec) at the start of a row: sl st in the first ch-1 sp and in the next dc, ch 4 (counts as dc and ch 1), dc in the next dc.

Decrease (dec) at the end of a row: work to the second-to-last dc and turn, leaving the last square unworked.

Plain rows: begin with ch 4 (counts as dc and ch 1), skip the first ch-1 sp, dc in the next dc. End with dc in the 3rd ch of the turning ch.

Gauge and Checkpoints

Lace gauge: 10 squares and 10 rows = 4 in (10.2 cm). One square is 0.4 in (1.0 cm) wide and 0.4 in (1.0 cm) tall.

Border gauge: 5 sc = 1 in (2.5 cm).

Make one pocket first. It is the quickest way to test both gauges.

  • After pocket Row 4: 8.0 in (20.3 cm) wide, 1.6 in (4.1 cm) tall
  • After panel Row 10: 8.4 in (21.3 cm) wide, 4.0 in (10.2 cm) tall
  • After panel Row 18: 8.4 in (21.3 cm) wide, 7.2 in (18.3 cm) tall
  • After panel Row 36: 14.4 in (36.6 cm) tall

If your piece is too big, go down 0.5 mm. If it is too small, go up 0.5 mm.

Handmade crocheted lace featuring cream and sage-green diamond motifs arranged on a light wooden surface.

Leaf Panel

Use MC. A row of n squares has 2n + 1 sts, plus 2 extra sts for each fan in that row. The center square of every row is filled, and these filled squares stack up to form the vein.

Foundation: Ch 10.

Row 1: Dc in the 6th ch from the hook (the skipped ch count as dc and ch 1), dc in each of the next 2 ch, ch 1, skip the next ch, dc in the last ch. Turn. (3 sq: open, filled, open; 7 sts)

Rows 2–10 (increase rows): Inc at the start, work open squares to the center, work 1 filled square, work open squares until 1 square remains, inc at the end. Turn. Row r has 2r + 1 squares.

  • Row 2: 5 sq (11 sts)
  • Row 3: 7 sq (15 sts)
  • Row 4: 9 sq (19 sts)
  • Row 5: 11 sq (23 sts)
  • Row 6 (fan row): inc at the start (sq 1), 2 open sq, fan (sq 4–5), 1 open sq, 1 filled sq (sq 7), 1 open sq, fan (sq 9–10), 1 open sq, inc at the end (sq 12–13). (13 sq; 27 + 4 = 31 sts)
  • Row 7: rework both fans. (15 sq; 31 sts)
  • Row 8: 17 sq (35 sts)
  • Row 9: 19 sq (39 sts)
  • Row 10: 21 sq (43 sts)

Rows 11–18 (straight): Work plain rows of 21 squares, with the center square (sq 11) filled. (21 sq; 43 sts)

Rows 12 and 18 (fan rows): 2 open sq, fan (sq 3–4), 3 open sq, fan (sq 8–9), 1 open sq, 1 filled sq, 1 open sq, fan (sq 13–14), 3 open sq, fan (sq 18–19), 2 open sq. (21 sq; 43 + 8 = 51 sts)

Rework all the fans on Rows 13 and 19.

Rows 19–36 (shaping the top): Dec at both ends on every odd row, from Row 19 through Row 35. Work the even rows plain. Keep the center square filled.

  • Rows 19–20: 19 sq (39 sts)
  • Rows 21–22: 17 sq (35 sts)
  • Rows 23–24: 15 sq (31 sts)
  • Row 24 (fan row): 4 open sq, fan (sq 5–6), 1 open sq, 1 filled sq, 1 open sq, fan (sq 10–11), 4 open sq. (15 sq; 31 + 4 = 35 sts)
  • Rows 25–26: 13 sq (27 sts); rework the fans on Row 25
  • Rows 27–28: 11 sq (23 sts)
  • Rows 29–30: 9 sq (19 sts)
  • Row 30 (fan row): 1 open sq, fan (sq 2–3), 1 open sq, 1 filled sq, 1 open sq, fan (sq 7–8), 1 open sq. (9 sq; 19 + 4 = 23 sts)
  • Rows 31–32: 7 sq (15 sts); rework the fans on Row 31
  • Rows 33–34: 5 sq (11 sts)
  • Rows 35–36: 3 sq (7 sts)

Fasten off. The panel should measure 8.4 x 14.4 in (21.3 x 36.6 cm).

Pocket (Make 2)

Use MC. Work each pocket from the top edge down to the curved bottom.

Foundation: Ch 44.

Row 1: Dc in the 6th ch from the hook, [ch 1, skip the next ch, dc in the next ch] 19 times. Turn. (20 sq; 41 sts)

Row 2: Plain row. (20 sq; 41 sts)

Row 3 (fan row): 1 open sq, [fan, 2 open sq] 4 times, fan, 1 open sq. The fans sit on sq 2–3, 6–7, 10–11, 14–15 and 18–19. (20 sq; 41 + 10 = 51 sts)

Row 4: Rework all 5 fans. (20 sq; 41 sts)

Row 5: Dec at both ends. (18 sq; 37 sts)

Row 6: Dec at both ends. (16 sq; 33 sts)

Row 7 (fan row): Dec at the start, 1 open sq, [fan, 2 open sq] 3 times, then turn. Turning here completes the dec at the end. The fans sit on sq 3–4, 7–8 and 11–12. (14 sq; 29 + 6 = 35 sts)

Row 8: Sl st across the first 2 squares, ch 4 (counts as dc and ch 1), dc in the 3rd dc of the fan, ch 1, dc in the next dc. Rework the remaining fans and work open squares until 2 squares remain. Turn, leaving those 2 squares unworked. (10 sq; 21 sts)

Fasten off. Each pocket should measure 8.0 in (20.3 cm) across the top, 4.0 in (10.2 cm) across the bottom and 3.2 in (8.1 cm) tall.

Hanging Loop

Use CC. Ch 40.

Row 1: Sc in the 2nd ch from the hook and in each ch across. (39 sc)

Row 2: Do not turn. Ch 1, rev sc in each sc across. (39 rev sc)

Fasten off and leave a 12 in (30.5 cm) tail. The strip should be 7.8 in (19.8 cm) long.

Make All Pieces

  • White (MC): 1 leaf panel and 2 pockets
  • Mint (CC): the borders on all 3 lace pieces, plus 1 hanging loop

Layout, from top to bottom:

        ( loop )
     panel top lace
    [ upper pocket ]
    [ lower pocket ]
    panel bottom tip

Joining

Work the Border section on the panel and on both pockets before you join anything. Sew with CC, whipstitching through the back bar of each rev sc.

Upper pocket: Pin the pocket’s top corners to the panel border at the level of Row 28, where the bordered panel is 5.4 in (13.7 cm) wide. The pocket top is 9.0 in (22.9 cm) wide, so the extra 3.6 in (9.1 cm) forms a deep cup. Pin the center of the pocket’s bottom edge to the vein at Row 18.

Lower pocket: Pin the top corners to the panel border at the level of Row 20, where the bordered panel is 8.6 in (21.8 cm) wide. Pin the center of the bottom edge to the vein at Row 10. With only 0.4 in (1.0 cm) of extra width, this pocket stays shallow. Its top border sits just behind the bottom of the upper pocket.

Stitch-to-stitch logic: On each pocket, sew one side (16 sts), the bottom (21 sts) and the other side (16 sts), which is 53 sts in total. Catch 1 panel st for each pocket st. Use the panel’s border sts where the pocket meets the border, and a dc post or ch-1 sp in the lace everywhere else. Leave the pocket top (49 sts) free.

Tension: Sew snugly but without puckering the lace. Knot securely at every pocket corner, because the corners carry the weight.

Loop: Fold the strip in half. Sew 0.5 in (1.3 cm) of each end flat to the back of the top tip. That leaves 6.8 in (17.3 cm) free, so the loop rises 3.4 in (8.6 cm) above the tip.

Checkpoint: Without the loop, the organizer should still measure 9.4 x 15.4 in (23.9 x 39.1 cm).

Border

Use CC. The gauge is 5 sc = 1 in (2.5 cm). The three rounds together add 0.5 in (1.3 cm) on every edge.

Panel Border

Rnd 1: Join at the bottom tip.

  • Bottom tip: work 7 sc across the foundation edge, with 3 sc in the 4th st. (9 sc)
  • First side: 2 sc in each row-end. (72 sc)
  • Top tip: work across the 7 sts of Row 36, with 3 sc in the 4th st. (9 sc)
  • Second side: 2 sc in each row-end. (72 sc)

Join. (162 sc)

Rnd 2: Ch 1, sc in each sc, with 3 sc in the center sc of each tip. Join. (each tip 11 sc, each side 72 sc; 166 sc)

Rnd 3: Ch 1, rev sc in each sc around. Join and fasten off. (166 rev sc)

Why it works: The panel is 36 rows of 0.4 in (1.0 cm), so each side is 14.4 in (36.6 cm) long. At 5 sc per inch, 72 sc also measures 14.4 in (36.6 cm), so the edge lies flat. The 3-sc points sharpen both tips.

Pocket Border

Rnd 1: Join at a top corner.

  • Top: working across the foundation, sc in the base of each dc and in each ch-1 sp (41 sts). Work 3 sc in the first and last of these sts for the corners. (45 sc, corners included)
  • First side: 2 sc in each row-end. (16 sc)
  • Bottom: sc in each of the 21 sts of Row 8. (21 sc)
  • Second side: 2 sc in each row-end. (16 sc)

Join. (98 sc)

Rnd 2: Ch 1, sc in each sc, with 3 sc in the center sc of each top corner. Join. (top 49, sides 16 each, bottom 21; 102 sc)

Rnd 3: Ch 1, rev sc in each sc around. Join and fasten off. (102 rev sc)

Why it works: The top edge is 20 squares, or 8.0 in (20.3 cm), which equals 40 sc at gauge. The one extra sc sits on a corner. Each side is 8 rows, or 3.2 in (8.1 cm), which equals 16 sc.

Final Blocking

  1. Weave in all ends.
  2. Soak the pieces in cool water for 10 minutes. Press the water out gently; do not wring.
  3. Roll the pieces in a towel to remove excess water.
  4. Pin the panel to 9.4 x 15.4 in (23.9 x 39.1 cm), with both tips pointed and the vein straight.
  5. Pin each pocket to 9.0 x 4.2 in (22.9 x 10.7 cm), with an even curve along the bottom.
  6. Open each fan by placing a pin in its center dc.
  7. Let the pieces dry completely before joining.
  8. After joining, steam the seams lightly from 1 in (2.5 cm) above. Don’t flatten the pocket cups.

Final Quality-Control Checklist

  • The panel measures 9.4 x 15.4 in (23.9 x 39.1 cm), and the vein runs straight from tip to tip.
  • The fans mirror each other across the vein.
  • Both pockets measure 9.0 x 4.2 in (22.9 x 10.7 cm).
  • The border counts are 166 sts on the panel and 102 sts on each pocket.
  • Every pocket corner is knotted securely.
  • The loop rises 3.4 in (8.6 cm) and is centered on the tip.
  • No yarn ends show on the front.

Troubleshooting

The border ruffles: You have too many sc. Work exactly 2 sc per row-end.

The border pulls in: Your sc are too tight. Go up 0.5 mm for the border only.

The vein drifts sideways: Check that Row r has 2r + 1 squares, and fill the middle square.

The fans look flat: Make sure you skip both ch-1 sps on either side of each fan.

A pocket sags: Check that all 53 edge sts are sewn and that both corners are knotted.

The organizer tilts on the hook: Re-center the loop ends behind the tip.

Care

Empty the pockets, then hand wash in cool water. Lay flat to dry, re-pinning to size if needed.

Pale green and cream crocheted hanging organizer displayed above towels, plants, and soap in a bright bathroom setting.

Final Notes

Everything is built from one measurement: a square is 0.4 in (1.0 cm). That makes the panel 21 squares by 36 rows, or 8.4 x 14.4 in (21.3 x 36.6 cm), and each pocket 20 squares by 8 rows, or 8.0 x 3.2 in (20.3 x 8.1 cm). The border adds 0.5 in (1.3 cm) on every side, for a finished panel of 9.4 x 15.4 in (23.9 x 39.1 cm) and finished pockets of 9.0 x 4.2 in (22.9 x 10.7 cm). If your test pocket matches gauge, the other pieces will come out to size.

Happy crocheting!

Leave a Comment