This airy curtain is built from small rectangular lace motifs. Each one has a chain mesh with little picot nodes and a raised dragonfly in the middle. The dragonfly has a braided body, two bobble eyes and four oval wings filled with ladder bars. Light comes through the mesh, and the dragonflies stand out against the window.
The curtain uses two colors in vertical strips: soft periwinkle blue and warm cream. Seven strips alternate periwinkle, cream, periwinkle, cream, periwinkle, cream, periwinkle. Seven tabs along the top hold it on a curtain rod. The look is cottage-style and summery, and it works nicely as a room divider too.
The pattern uses US crochet terms. The finished curtain measures 43.5 in x 86.5 in (110.5 cm x 219.7 cm) after the border, not counting the hanging tabs.
You’ll work 70 identical mesh motifs, each with a single-crochet edging, then make 70 dragonflies and sew one onto each motif. Then you join the motifs into 7 strips of 10, join the strips side by side, add a 3-round border and work the tabs.
Finished Size and Construction
- Finished size: 43.5 in x 86.5 in (110.5 cm x 219.7 cm), plus tabs
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (4), cotton or cotton blend
- Hook: 4.5 mm (US 7)
- Number of pieces: 70 motifs (40 periwinkle, 30 cream), plus 70 dragonfly appliqués
- Layout: 7 motifs across x 10 motifs down
- Motif size (edged): 6 in x 8.5 in (15.2 cm x 21.6 cm)
- Motif size before edging: 5.5 in x 8 in (14.0 cm x 20.3 cm)
- Joined size before border: 42 in x 85 in (106.7 cm x 215.9 cm)
- Border depth: 0.75 in (1.9 cm) on each side
Materials
Mercerized or matte cotton in worsted weight is best. It holds the lace shape, blocks crisply and won’t stretch much while hanging. The yardage below assumes a yarn with about 170 m per 100 g.
- Periwinkle (Color A): 800 g, about 1,360 m. Used for 40 motifs and dragonflies, the strip-to-strip seams, the border and the tabs.
- Cream (Color B): 500 g, about 850 m. Used for 30 motifs and dragonflies and the seams inside the cream strips.
Tools:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Stitch markers
- Rust-proof pins and blocking mats
- Spray bottle
- Measuring tape
- Curtain rod with a diameter of up to 1.5 in (3.8 cm)
These quantities include a margin of roughly 10–15% for swatching, tails and tension differences.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- BLO – back loop only
- RS / WS – right side / wrong side
Special stitches
- Picot node: sc, ch 3, sl st into the front loop of the sc you just made.
- Bobble: [yarn over, insert hook, yarn over and pull up a loop, yarn over and pull through 2 loops] 5 times in the same st. Then yarn over and pull through all 6 loops on the hook.
Gauge and Checkpoints
Gauge is 16 sc and 16 sc rows = 4 in (10.2 cm), which works out to 4 sc per 1 in (2.5 cm). In the mesh, each chain-loop row is about 0.5 in (1.3 cm) tall.
Before you make the rest, work one complete motif with its edging and pin it flat. Then check:
- Row 1 (22 sc): 5.5 in (14.0 cm) wide.
- After Row 9: about 4.25 in (10.8 cm) tall.
- After Row 17: 5.5 in x 8 in (14.0 cm x 20.3 cm).
- After the edging: 6 in x 8.5 in (15.2 cm x 21.6 cm).
If your motif comes out too big, go down to a 4 mm hook. If it’s too small, go up to a 5 mm hook. If only the height is off, the chain loops are the cause. Pull each chain snug to the hook shaft, or relax it, but don’t change the number of chains.

Mesh Motif (make 70)
Use Color A or Color B. Every motif is worked the same way.
Foundation: Ch 23.
Row 1 (RS): Sc in the 2nd ch from hook and in each ch across. Turn. (22 sc)
Row 2: Ch 1, sc in the first sc, [ch 4, sk 2 sc, sc in the next sc] 7 times. Turn. (8 sc, 7 ch-4 loops)
Row 3: Ch 5 (counts as dc + ch 2), sc in the first ch-4 loop, [ch 4, sc in the next ch-4 loop] 6 times, ch 2, dc in the last sc. Turn. (7 sc, 6 ch-4 loops, 2 ch-2 half loops)
Row 4: Ch 1, sc in the dc. [Ch 4, picot node in the next ch-4 loop] 6 times. Ch 4, sc in the 3rd ch of the turning ch. Turn. (8 sc including 6 picot nodes, 7 ch-4 loops)
Rows 5–14: Repeat Rows 3 and 4 five more times. Every even row has 6 picot nodes, which give the mesh its knotted, hexagon-like look.
Row 15: Repeat Row 3.
Row 16: Work as Row 4, but use a plain sc in each loop instead of a picot node. (8 sc, 7 ch-4 loops)
Row 17: Ch 1, sc in the first sc, [2 sc in the next ch-4 loop, sc in the next sc] 7 times. (1 + 21 = 22 sc) Don’t fasten off.
Checkpoint: 5.5 in x 8 in (14.0 cm x 20.3 cm).
Edging Round
Each corner is worked as 3 sc in one stitch, and the middle sc is the corner stitch. The other two belong to the sides next to it.
Rnd 1: Ch 1. Work 3 sc in the last sc of Row 17 (corner).
- Long side: Rotate the motif. Along the row ends, work 2 sc in the end of each of Rows 16 down to 2. (30 sc)
- Bottom corner and short side: Work 3 sc in the first foundation ch (corner). Work 1 sc in each of the next 20 ch. Work 3 sc in the last foundation ch (corner).
- Second long side: Work 2 sc in the end of each of Rows 2 through 16. (30 sc)
- Top corner and short side: Work 3 sc in the first sc of Row 17 (corner), then 1 sc in each of the next 20 sc.
Join with a sl st to the first sc and fasten off.
Edging count: Each short side has 24 sts (2 corners + 1 + 20 + 1). Each long side has 34 sts (2 corners + 1 + 30 + 1). The round has 112 sc in total: 12 sc in the corner groups + 40 on the short sides + 60 on the long sides.
Checkpoint: 6 in x 8.5 in (15.2 cm x 21.6 cm). At 4 sts per inch, 24 ÷ 4 = 6 and 34 ÷ 4 = 8.5.
Dragonfly Appliqué (make 70)
Make each dragonfly in the same color as its motif.
Body
Foundation: Ch 15.
Row 1: Hdc in the 3rd ch from hook and in each ch across. (13 hdc)
Eyes: Ch 3, bobble in the 3rd ch from hook, sl st in the top of the last hdc. Ch 3, bobble in the 3rd ch from hook, sl st in the same hdc. (2 bobble eyes)
Fasten off and leave a 12 in (30.5 cm) tail. The body measures about 3.5 in (8.9 cm) long, eyes included.
Upper Wings (make 2)
Foundation: Ch 14.
Row 1: Tr in the 6th ch from hook (the skipped chs count as tr + ch 1). [Ch 1, sk 1 ch, tr in the next ch] 4 times. (6 tr bars, 5 ch-1 sps)
Rnd 2 (outline): Ch 1. Work 3 sc around the post of the last tr. Along the foundation side, work 2 sc in each ch-1 sp (10). Work 3 sc around the turning-ch post. Along the top, work 2 sc in each ch-1 sp (10). Join. (26 sc)
Fasten off. Each upper wing is a pointed oval about 2.75 in (7.0 cm) long.
Lower Wings (make 2)
Foundation: Ch 12.
Row 1: Tr in the 6th ch from hook. [Ch 1, sk 1 ch, tr in the next ch] 3 times. (5 tr bars, 4 ch-1 sps)
Rnd 2: Work as for the upper wing. (3 + 8 + 3 + 8 = 22 sc)
Fasten off. Each lower wing is about 2.25 in (5.7 cm) long.
Attaching
- Center the body vertically on the RS of the motif, with the eyes toward the top edge. Whipstitch it down along its length.
- Tuck the inner end of each upper wing under the body, 0.75 in (1.9 cm) below the eyes, angled slightly upward.
- Tuck the lower wings in right below them, angled slightly downward.
- Stitch each wing at its inner end, then tack it to the mesh at the outer tip and at one point on each side so it stays flat.
Make All Pieces
- Color A (periwinkle): 40 motifs with 40 dragonflies, for strips 1, 3, 5 and 7.
- Color B (cream): 30 motifs with 30 dragonflies, for strips 2, 4 and 6.
Layout (A = periwinkle, B = cream; every row is the same):
Row 1: A B A B A B A
Row 2: A B A B A B A
Row 3: A B A B A B A
... (rows 4–9 identical)
Row 10: A B A B A B A
Each column is one strip of 10 motifs. Place every motif with its Row 17 edge toward the top.
Joining
Method: Hold two motifs WS together and work a sc seam through the BLO of both layers, from corner to corner.
Stitch-to-stitch logic: The edged motifs have matching sts, so one stitch always joins to exactly one stitch.
- Inside a strip: Join the 24 sts of one short side to the 24 sts of the next motif, corner to corner. Use the strip color.
- Between strips: Join long sides 34 to 34 with Color A. One strip-to-strip seam runs through 10 motifs, so it has 340 seam sts. Corner sts are joined to corner sts, and no sts are added at the seams.
Tension: Keep your seam sts the same height as the edging sts. If you pull too tight, the curtain puckers along the seams. If the seam is too loose, the strips will drop unevenly when the curtain hangs. Lay the work flat every few motifs to check.
Checkpoint: Each strip is 6 in x 85 in (15.2 cm x 215.9 cm). The joined curtain is 42 in x 85 in (106.7 cm x 215.9 cm).
Border
Use Color A. Border gauge is the same as the motif edging: 4 sc per 1 in (2.5 cm), and 4 rounds per 1 in (2.5 cm).
Starting counts:
- Short side: 7 motifs x 24 sts = 168 sts
- Long side: 10 motifs x 34 sts = 340 sts
These counts include each motif’s own corner sts. The 4 outer corners are the corner sts of the 4 corner motifs.
Rnd 1: Join in any st. Work 1 sc in each st and 3 sc in each outer corner st. Join.
- Short sides: 166 + 2 + 2 = 170 sts each
- Long sides: 338 + 2 + 2 = 342 sts each
Rnd 2: Ch 1. Sc in each sc and 3 sc in each corner (middle) sc. Join.
- Short sides: 172 sts each
- Long sides: 344 sts each
Rnd 3: Repeat Rnd 2. Fasten off.
- Short sides: 174 sts each
- Long sides: 346 sts each
Why the math works: The motifs are 4 sts per inch, so 168 sts across = 42 in (106.7 cm). Each border round adds 1 st to each end of every side, so after 3 rounds the width is 174 sts = 43.5 in (110.5 cm). The long sides are 346 ÷ 4 = 86.5 in (219.7 cm). The 3 rounds add 0.75 in (1.9 cm) of depth on each side, which matches the stitch math.
Hanging Tabs (make 7)
On the top border, st 1 is the corner. Motif k lies over border sts 4 + 24(k – 1) through 27 + 24(k – 1). Work each tab over that motif’s center 8 sts, which are sts 12–19, 36–43, 60–67, 84–91, 108–115, 132–139 and 156–163.
Row 1: With the RS facing, join Color A in the first of the 8 sts. Sc in each of the 8 sts. Turn. (8 sc)
Rows 2–20: Ch 1, sc in each sc. Turn. (8 sc)
The tab is 2 in x 5 in (5.1 cm x 12.7 cm). Fold it to the WS and whipstitch the last row to the base of Rnd 1 of the border, leaving a 2.5 in (6.4 cm) loop for the rod.
Final Blocking
- Weave in all ends along the seams or the edging, never across the open mesh.
- Lay the curtain flat on blocking mats, in sections if needed.
- Pin the outer border straight to 43.5 in x 86.5 in (110.5 cm x 219.7 cm).
- Pin out each motif’s mesh so the loops open evenly.
- Pin each wing oval to shape, with the ladder bars straight.
- Mist the curtain thoroughly and let it dry completely before you unpin it.
- Hang it and let it settle for a day. Then re-pin any section that has dropped.
Final Quality-Control Checklist
- Every motif’s edging has 24 / 34 / 24 / 34 sts.
- Every dragonfly faces the top, with its body centered.
- The colors alternate A, B, A, B, A, B, A across the curtain.
- Seams lie flat, and corners meet at every intersection.
- Border Rnd 3 has 174 sts on each short side and 346 sts on each long side.
- The 7 tabs are evenly spaced, the same length and securely sewn.
- The curtain measures 43.5 in x 86.5 in (110.5 cm x 219.7 cm).
Troubleshooting
- The mesh is taller than 8 in (20.3 cm): Your chains are loose. Tighten them, and keep exactly 4 ch per loop.
- The edging ruffles: You’re working more than 2 sc per row end. Recount: each long side should have 30 sts between the corner groups.
- The wings curl: Block them flat, and tack the outer tips more firmly.
- The strips are different lengths: One strip has uneven seam tension. Unpick that seam and rework it to match the others.
- The border waves: Check that you worked 3 sc in the corners only and 1 sc in every other st.
Care
Hand wash in cool water with mild soap, press the water out in a towel and dry flat. Reshape and re-pin before you hang it again.

Final Notes
Everything depends on one measurement chain. A gauge of 4 sc per inch gives a mesh of 5.5 in x 8 in (14.0 cm x 20.3 cm). The edged motif is 6 in x 8.5 in (15.2 cm x 21.6 cm). Seventy motifs joined 7 x 10 make 42 in x 85 in (106.7 cm x 215.9 cm). The 3-round border brings the finished curtain to 43.5 in x 86.5 in (110.5 cm x 219.7 cm). Check each stage before you move on, and the whole curtain will hang straight and true.
Happy crocheting!