This wall organizer looks like a flower: a deep plum center ringed by 18 pointed lavender petals, with four lavender cups sewn across the lower half. It hangs from one sturdy loop and keeps pens, a small notepad, a phone and a remote within easy reach.
Two colors keep it simple. Plum makes the round center and lavender makes everything else. The style is clean and graphic. The petals are smooth shapes with a raised center vein, and the cups are firm single crochet tubes that hold their shape.
The pattern uses US crochet terms. The finished organizer measures about 14 in (35.6 cm) across the petal tips and about 15.5 in (39.4 cm) tall including the hanging loop. The cup row is about 8 in (20.3 cm) wide and 3 in (7.6 cm) tall.
Construction is modular. You crochet a flat disc in joined rounds, 18 separate petals worked around a foundation chain, four cups worked from the bottom up, and one hanging strip. The petals are sewn edge to edge onto the disc, the loop goes on the back, and the joined row of cups is sewn to the front.
Finished Size and Construction
- Finished size: 14 in (35.6 cm) across; 15.5 in (39.4 cm) tall with loop
- Skill level: Easy–Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 4.0 mm (G-6)
- Number of pieces: 24 (1 disc, 18 petals, 4 cups, 1 loop)
- Layout: 18 petals around the disc; 4 cups in one horizontal row
- Piece sizes: disc 8 in (20.3 cm); petal 3 in x 1.4 in (7.6 cm x 3.6 cm); cup 2 in (5.1 cm) diameter x 3 in (7.6 cm) tall
- Disc size before border: 7.5 in (19.1 cm)
- Border depth: 1 round, about 0.25 in (0.6 cm)
Materials
Choose a smooth worsted cotton. Cotton has crisp stitch definition and doesn’t sag when the cups are full. Look for about 85 m per 50 g ball.
- Plum (Color A): 50 g / 85 m
- Lavender (Color B): 100 g / 170 m
These quantities include about 20% extra for swatching and sewing tails.
Tools:
- 4.0 mm (G-6) crochet hook
- Tapestry needle
- Scissors
- 6–8 locking stitch markers
- Rust-proof pins and a foam blocking mat
- Spray bottle
- Measuring tape
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- MR – magic ring
- BLO – back loop only
- Rnd – round
Special stitch – 2 sc: work 2 sc in the same stitch (one increase).
Gauge and Checkpoints
Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) in sc worked in the round.
Test one piece first. Work the disc through Rnd 8 and measure it before you go further. Each sc round adds about 0.22 in (0.6 cm) to the radius.
Checkpoints:
- Disc after Rnd 8: 3.5 in (8.9 cm)
- Disc after Rnd 17: 7.5 in (19.1 cm)
- Disc after border Rnd 18: 8 in (20.3 cm)
- Petal: 3 in (7.6 cm) long x 1.4 in (3.6 cm) wide
- Cup base after Rnd 4: 1.75 in (4.4 cm)
- Finished cup: 2 in (5.1 cm) diameter x 3 in (7.6 cm) tall
If your disc is too big, go down 0.5 mm in hook size. If it’s too small, go up 0.5 mm. If the disc ruffles, your tension is loose. If it cups into a bowl, your tension is tight. Settle on your hook size before making the petals, because they use the same gauge.

Disc (Make 1, Plum)
Work in joined rounds. Join each round with a sl st to the first sc, then ch 1 to begin the next round. The ch 1 doesn’t count as a stitch.
Rnd 1: 6 sc in MR. (6 sts)
Rnd 2: 2 sc in each st around. (12 sts)
Rnd 3: (sc in next st, 2 sc in next st) x 6. (18 sts)
Rnd 4: (sc in next st, 2 sc in next st, sc in next st) x 6. (24 sts)
Rnds 5–17: Each round adds 6 sts. N is the round number. Work (sc in next [N – 2] sts, 2 sc in next st) x 6. On every other round, start with half of the plain stitches before the first increase. This moves the increase points so the circle stays round.
- Rnd 5: 30 sts
- Rnd 6: 36 sts
- Rnd 7: 42 sts
- Rnd 8: 48 sts
- Rnd 9: 54 sts
- Rnd 10: 60 sts
- Rnd 11: 66 sts
- Rnd 12: 72 sts
- Rnd 13: 78 sts
- Rnd 14: 84 sts
- Rnd 15: 90 sts
- Rnd 16: 96 sts
- Rnd 17: 102 sts
Checkpoint: the disc lies flat and measures 7.5 in (19.1 cm). Don’t fasten off. Work the border round next (see Border).
Petals (Make 18, Lavender)
The foundation chain becomes the center vein, and the dc stitches make the widest part. Sc at each end make the pointed tip and the narrower base.
Ch 11.
Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in next 5 ch, hdc in next ch, sc in next ch, (sc, ch 2, sc) in last ch for the tip. Turn the piece and work along the other side of the foundation chain: sc in next ch, hdc in next ch, dc in next 5 ch, hdc in next ch, sc in last ch (the same ch as the first sc). Join with sl st to first sc. (20 sts + ch-2 tip sp)
Check: 9 sts on each side + 2 tip sc = 20.
Rnd 2: Ch 1, sc in same st as join and in next 9 sts, (sc, ch 2, sc) in ch-2 sp, sc in next 10 sts. Join. (22 sc + ch-2 tip sp: 20 sts worked 1 per existing stitch + 2 sc added at tip)
Fasten off and leave a 12 in (30.5 cm) tail.
Checkpoint: 3 in (7.6 cm) long and 1.4 in (3.6 cm) wide. The base is the 6 sc centered on the join: the last 3 and first 3 sc of Rnd 2.
Cups (Make 4, Lavender)
Work in joined rounds, as for the disc.
Rnd 1: 6 sc in MR. (6 sts)
Rnd 2: 2 sc in each st around. (12 sts)
Rnd 3: (sc in next st, 2 sc in next st) x 6. (18 sts)
Rnd 4: (sc in next st, 2 sc in next st, sc in next st) x 6. (24 sts)
Checkpoint: base measures 1.75 in (4.4 cm).
Rnd 5: Working in BLO, sc in each st around. (24 sts) The unused front loops form a crisp ridge that turns the wall straight up.
Rnds 6–17: Sc in each st around. (24 sts)
Rnd 18: Sl st loosely in each st around. (24 sl sts: 24 worked 1 per existing stitch + 0 added)
Fasten off and leave a 20 in (50.8 cm) tail.
Checkpoint: 2 in (5.1 cm) diameter and 3 in (7.6 cm) tall.
Hanging Loop (Make 1, Lavender)
Ch 45.
Rnd 1: Sc in 2nd ch from hook and in next 42 ch, 3 sc in last ch. Turn the piece and work along the other side of the chain: sc in next 42 ch, 2 sc in the same ch as the first sc. Join. (90 sts)
Check: 1 + 42 + 3 + 42 + 2 = 90.
Fasten off and leave a 12 in (30.5 cm) tail. The strip measures 11 in (27.9 cm) x 0.5 in (1.3 cm).
Make All Pieces
- Plum: 1 disc (Rnds 1–17 plus border Rnd 18)
- Lavender: 18 petals, 4 cups, 1 hanging loop
That’s 24 pieces in total. Finish the disc border before you start joining.
Layout grid (front view):
( loop )
P P P P P
P P
P PLUM DISC P
P P
P [C1] [C2] [C3] [C4] P
P P
P P P P P
P = petal (18 in total, one every 20 degrees). C1–C4 = cups.
Joining
Sew every seam with a whipstitch in lavender. Pull each stitch snug enough to close the gap, but not so tight that the seam puckers.
1. Petals to disc. Divide the 108 border sts into 18 sections of 6 sts and mark the start of each one. Whipstitch each petal’s 6 base sts to one section’s 6 sts, one stitch to one stitch. Go through the back loops of the disc so the seam stays hidden. Because 18 petals x 6 sts = 108 sts, the last petal closes the ring with no gap or overlap.
2. Hanging loop. Fold the strip in half. On the back of the disc, center both ends at the top so 1 in (2.5 cm) of each end overlaps the disc. Sew around both ends twice. That leaves a 9 in (22.9 cm) loop that rises about 1.5 in (3.8 cm) above the top petal tips.
3. Cups to each other. Stand the four cups in a row with their bases level. Whipstitch each neighboring pair together along one column, from Rnd 6 to Rnd 15, matching round to round. That’s 10 rounds per seam and 3 seams.
Checkpoint: the cup row is 8 in (20.3 cm) wide.
4. Cup row to disc. Center the row so the cup bases sit 0.75 in (1.9 cm) above the bottom of the disc. The rims then sit 3.75 in (9.5 cm) up, just below the center. Whipstitch the back 6 sts of each cup’s Rnd 5 ridge to the disc, then the back 6 sts of each rim. Add a few tacking stitches halfway up the back of each cup.
Size checkpoint: 14 in (35.6 cm) across, 15.5 in (39.4 cm) tall with the loop.
Border
The border is one plum round on the disc. Work it right after Rnd 17, before any joining. It forms the edge that the petals are sewn to.
Border gauge: the same as the disc, 16 sc = 4 in (10.2 cm). It adds about 0.25 in (0.6 cm) all around.
Rnd 18 (border): Ch 1, (sc in next 16 sts, 2 sc in next st) x 6. Join, fasten off and weave in the end. (108 sts: 102 worked 1 per existing stitch + 6 added)
Per petal section: 108 ÷ 18 = 6 sts.
Why the math works: A circle has no corners, so all 18 sections are equal. Each petal base is 6 sts, and 18 x 6 = 108, the exact border count. The circumference is about 25.1 in (63.8 cm), so each section is about 1.4 in (3.6 cm), which matches the petal’s width. The 6 increases also stop the edge from tightening when the petals pull on it.
Final Blocking
- Weave all tails into the seams.
- Lay the organizer face up on the mat.
- Pin the disc into an 8 in (20.3 cm) circle.
- Pin each petal tip so it sits 3 in (7.6 cm) from the disc edge, with the tips evenly spaced.
- Put a rolled towel or a 2 in (5.1 cm) paper tube in each cup.
- Spray until damp, not soaked.
- Let it dry fully, usually about 24 hours.
- Unpin, take out the forms and measure again.
Final Quality-Control Checklist
- Disc lies flat and measures 8 in (20.3 cm)
- All 18 petals are 3 in (7.6 cm) long with sharp tips
- Petal veins point toward the center of the disc
- No gaps between petal bases
- Cups are 2 in (5.1 cm) x 3 in (7.6 cm) with crisp base ridges
- Cup row is level, centered and 8 in (20.3 cm) wide
- Cup rims are tacked down and don’t tip forward
- Loop is centered and sewn on securely
- Overall size is 14 in (35.6 cm) x 15.5 in (39.4 cm)
- All tails are woven in
Troubleshooting
Disc ruffles: your tension is loose or there are extra increases. Recount the rounds and try a smaller hook.
Disc cups into a bowl: your tension is tight or increases were missed. Recount the rounds and try a larger hook.
Disc looks hexagonal: the increases are stacking on top of each other. Move them on alternate rounds.
Petals curl: block them flat. If they still curl, work Rnd 2 more loosely.
Petals don’t fit the border: each section must be exactly 6 sts.
Cup tops flare: work Rnd 18 more tightly.
Cups lean forward when full: add more tacking stitches at the rims.
Loop stretches: work a line of surface sl st down its center.
Care
Empty the cups, then hand wash in cool water with mild soap. Reshape the organizer and dry it flat.

Final Notes
The sizes all build on each other, starting from gauge. At 16 sc = 4 in (10.2 cm), the disc is 7.5 in (19.1 cm) after Rnd 17. The border brings it to 8 in (20.3 cm) with 108 sts, exactly 18 petal bases of 6 sts each. Adding a 3 in (7.6 cm) petal on each side gives the 14 in (35.6 cm) flower. Four 2 in (5.1 cm) cups make the 8 in (20.3 cm) row, sewn 0.75 in (1.9 cm) above the bottom edge. If your first piece is on gauge, everything else will fit.
Happy crocheting!