The Seafoam Wave holder is a tall, airy wall organizer with three small scalloped baskets stacked on an open diamond-mesh panel. Each basket holds one standard toilet roll upright, and the whole piece hangs from a natural wooden ring on a hook or towel peg.
It uses one shade of soft aqua cotton, which looks fresh and beachy in a bathroom. Each basket has a solid single crochet base, a band of eyelets, a round of open fans, and a wavy rim that gives the design its name. It looks just as good in cream or white.
This pattern uses US crochet terms. The finished holder is about 7.5 in (19.1 cm) wide including the border and about 27.25 in (69.2 cm) tall from the bottom edge to the top of the ring tab, not counting the ring.
You will make four pieces. The three identical oval baskets are worked in the round from the base up. The mesh back panel is worked flat in rows and narrows to a tab at the top. You sew the baskets to the panel, add a two-row single crochet border, and fold the tab around the ring.
Finished Size and Construction
- Finished size: about 7.5 in (19.1 cm) wide x 27.25 in (69.2 cm) tall, not counting the ring
- Skill level: Intermediate (easy stitches, careful assembly)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), 100% cotton
- Hook: 5 mm (H-8)
- Number of pieces: 4 (3 baskets + 1 mesh panel), plus a wooden ring
- Layout: 1 column of 3 baskets, evenly spaced
- Basket base: about 6.3 in (16.0 cm) long x 4.3 in (10.9 cm) wide
- Basket wall height: about 2.75 in (7.0 cm) at the fan peaks
- Panel body before border: 6.5 in (16.5 cm) wide x 24 in (61.0 cm) tall
- Border depth: 2 rows of sc, about 0.5 in (1.3 cm)
Materials
Choose a smooth, firm worsted cotton or cotton blend. Cotton holds the basket shape, doesn’t sag under the weight of a roll, and stands up to bathroom humidity and washing. A round, tightly plied yarn gives the neatest mesh loops.
- Aqua (main color): 200 g, about 380 m (415 yd)
Expected use is about 35 g per basket (105 g total), 50 g for the panel and tab, and 10 g for the border and sewing. The 200 g includes a margin of about 35 g for gauge differences and swatching.
Tools:
- 5 mm (H-8) crochet hook
- 2 in (5.1 cm) unfinished wooden ring
- Tapestry needle
- 6 to 8 locking stitch markers
- Measuring tape
- Rust-proof pins, blocking mat, spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- BLO – back loop only
- inc – 2 sc in the same st
- RS – right side
- rep – repeat
Special stitch – Fan: (dc, ch 1) 4 times in the same st, then 1 more dc in that same st. One fan = 5 dc and 4 ch-1 sps.
Gauge and Checkpoints
Gauge: 16 sc and 16 rounds = 4 in (10.2 cm). In the mesh, one ch-6 repeat is 1.3 in (3.3 cm) wide and each mesh row is 0.75 in (1.9 cm) tall, so 5 repeats make 6.5 in (16.5 cm).
Make one basket base first and use it as your gauge swatch.
- After base Rnd 9: 6.3 in (16.0 cm) x 4.3 in (10.9 cm), within 0.25 in (0.6 cm).
- After basket Rnd 17: wall about 2.75 in (7.0 cm) tall.
- After panel Row 8: 6.5 in (16.5 cm) wide x 6 in (15.2 cm) tall, lightly stretched.
- After panel Row 32: 24 in (61.0 cm) tall.
If the base is too big, go down half a hook size. If it is too small, go up half a size. A base narrower than about 4.25 in (10.8 cm) won’t hold a roll, so don’t skip this check.

Basket (Make 3)
The base is an oval. The 8 straight stitches on each long side never change, and all increases happen in the two curved ends.
Ch 11.
Rnd 1: 3 sc in 2nd ch from hook, sc in next 8 ch, 3 sc in last ch. Rotate to work along the other side of the chain and sc in next 8 ch. Join with sl st to first sc. (22 sts)
From here on, start each round with ch 1 (does not count as a st) and end it with sl st to the first sc. Mark the first st of each round.
Rnd 2: [2 sc in each of next 3 sts, sc in next 8 sts] twice. (28 sts)
Rnd 3: [(sc in next st, inc) 3 times, sc in next 8 sts] twice. (34 sts)
Rnd 4: [(sc in next 2 sts, inc) 3 times, sc in next 8 sts] twice. (40 sts)
Rnd 5: [(sc in next 3 sts, inc) 3 times, sc in next 8 sts] twice. (46 sts)
Rnd 6: [(sc in next 4 sts, inc) 3 times, sc in next 8 sts] twice. (52 sts)
Rnd 7: [(sc in next 5 sts, inc) 3 times, sc in next 8 sts] twice. (58 sts)
Rnd 8: [(sc in next 6 sts, inc) 3 times, sc in next 8 sts] twice. (64 sts)
Rnd 9: [(sc in next 7 sts, inc) 3 times, sc in next 8 sts] twice. (70 sts)
Each curved end now has 27 sts and each straight side has 8: 27 + 8 + 27 + 8 = 70. Measure the base now.
Walls
Rnd 10: Sc in BLO of each st around. (70 sts) The unworked front loops make a crisp ridge where the wall turns up.
Rnds 11–13: Sc in each st around. (70 sts)
Rnd 14 (eyelets): Ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1, sk next st; rep from * 34 more times. Join with sl st to 3rd ch of ch-4. (35 dc + 35 ch-1 sps)
Rnd 15: Ch 1, sc in each dc and each ch-1 sp around. Join. (70 sts = 70 worked 1-per-existing-st + 0 added)
Rnd 16 (fans): Ch 1, sc in next st, ch 2, sk 4 sts, Fan in next st, ch 2, sk 4 sts; rep from * 6 more times. Join to first sc. (7 fans, 7 sc, 14 ch-2 sps)
Each repeat uses 10 sts of Rnd 15 (1 + 4 + 1 + 4), so 7 repeats use all 70.
Rnd 17 (wave rim): Ch 1, sc in sc, 2 sc in ch-2 sp, (sc in next dc, sc in next ch-1 sp) 4 times, sc in next dc, 2 sc in next ch-2 sp; rep from * 6 more times. Join. Fasten off, leaving a 30 in (76.2 cm) tail for sewing.
Rnd 17 count: each repeat works 1 sc into each of 10 existing sts (1 sc + 5 dc + 4 ch-1 sps), for 70 in total. The 2 sc in each of 2 ch-2 sps add 4 more per repeat, for 28 added. (70 + 28 = 98 sts) The fans rise and the sc dip between them, which makes the wave.
Weave in only the starting tail. Make 3 baskets in total.
Mesh Back Panel (Make 1)
Ch 27.
Row 1: Sc in 2nd ch from hook, ch 6, sk 4 ch, sc in next ch; rep from * 4 more times. Turn. (5 ch-6 loops)
Row 2: Ch 3 (half loop), sc in first ch-6 loop, ch 6, sc in next ch-6 loop; rep from * 3 more times, ch 3, dc in last sc. Turn. (4 full loops + 2 half loops)
Row 3: Ch 1, sc in dc, ch 6, sc in next ch-6 loop; rep from * 3 more times, ch 6, sc in top ch of ch-3. Turn. (5 ch-6 loops)
Rows 4–32: Rep Rows 2 and 3, ending with a Row 2 repeat. The panel now has 32 rows and is 24 in (61.0 cm) tall. Do not fasten off.
Top Taper
Row 33: Sl st in 3 ch of the half loop, then sl st into the first full loop. Sc in that loop, ch 6, sc in next loop; rep from * 2 more times. Turn. (3 loops)
Row 34: Sl st in first 3 ch of first loop, sc in that loop, (ch 6, sc in next loop) twice. Turn. (2 loops)
Row 35: Sl st in first 3 ch of first loop, sc in that loop, ch 6, sc in next loop. Turn. (1 loop)
These 3 taper rows add 2.25 in (5.7 cm).
Ring Tab
Row 36: Sl st in first 2 ch of the loop, ch 1, 8 sc in the loop. Turn. (8 sts)
Rows 37–43: Ch 1, sc in each st across. Turn. (8 sts)
The tab is 8 rows, or 2 in (5.1 cm). Fasten off, leaving a 12 in (30.5 cm) tail.
Make All Pieces
All pieces are Aqua:
- Basket: 3
- Mesh panel with tab: 1
Layout, front view (row numbers refer to the panel):
[ ring ]
[ tab ] Rows 36-43
/ mesh \ Rows 33-35
| mesh | Rows 27-32
| BASKET 3| base on Row 24, Rnd 15 on Row 26
| mesh |
| BASKET 2| base on Row 13, Rnd 15 on Row 15
| mesh |
| BASKET 1| base on Row 2, Rnd 15 on Row 4
|_________| Row 1
The baskets are 11 rows apart, which is 8.25 in (21.0 cm) from base to base.
Joining
Lay the panel flat with the RS up and Row 1 at the bottom. On each basket, mark the 35-st back half on Rnd 10. That is the 8 sts of one straight side, plus 13 sts into one curved end and 14 into the other: 13 + 8 + 14 = 35. Mark the same 35 positions directly above on Rnd 15.
Base line: Center the basket on the panel with its base ridge on the row shown in the layout. Using the long tail, whipstitch the 35 marked front loops of Rnd 10 to the sc points and chain strands of that mesh row. Sew 7 basket sts across each of the 5 full loops (5 x 7 = 35). The curved back flattens against the mesh, and the front stays rounded.
Rim line: Sew the 35 marked sts of Rnd 15 to the mesh row 2 rows higher, again 7 sts per loop. Rnd 15 is about 1.75 in (4.4 cm) above the ridge, while 2 mesh rows are 1.5 in (3.8 cm). Flattening the back wall takes up that 0.25 in (0.6 cm) difference, so the basket stands upright without pulling.
Tension: Sew snugly but not tightly. The mesh should stay flat, with no puckers above or below the seam.
Checkpoint: With all three baskets attached, the panel should still be 6.5 in (16.5 cm) wide and 24 in (61.0 cm) tall. If it has narrowed, unpick the seam and sew it more loosely.
Border
Border gauge: 4 sc per 1 in (2.5 cm). Each mesh row is 0.75 in (1.9 cm) tall, so 3 sc per row end matches gauge. The 26-ch foundation spans 6.5 in (16.5 cm), which is also 4 per inch.
The border is worked in rows. It starts at one side of the tab, runs down, across the bottom, and back up, without crossing the tab.
Border Row 1: With the RS facing, join yarn at the left base of the tab. Working in row ends, work 3 sc in each of the 3 taper rows (9 sc), then 3 sc in each of the 32 body rows (96 sc). That gives 105 sc on the left side. Along the bottom of the foundation chain, work 3 sc in first ch, sc in next 24 ch, 3 sc in last ch (30 sc). Then work up the right side: 96 sc along the body and 9 sc along the taper (105 sc). Turn. (240 sts = 105 + 30 + 105)
The 30 bottom sts already include both 3-sc corner groups. The 105 sts on each side include no corner sts.
Border Row 2: Ch 1, sc in each st, working 3 sc in the center st of each bottom corner group. Fasten off. (244 sts = 105 + 34 + 105)
Each corner group grows from 3 to 5, so the bottom is 5 + 24 + 5 = 34 and the corners lie flat. The border adds 0.5 in (1.3 cm) on each side, so the width is 6.5 + 0.5 + 0.5 = 7.5 in (19.1 cm).
Ring: Fold the tab over the wooden ring toward the back. Whipstitch Row 43 to the back of Row 36 through all 8 sts.
Final Blocking
- Weave in all remaining tails, splitting the yarn as you go.
- Lay the holder face down and mist it until damp but not soaked.
- Pin the panel to 7.5 in (19.1 cm) wide and full length, opening each loop into a neat diamond.
- Turn it face up and fill each basket with a roll wrapped in plastic or a folded towel.
- Pin the fan peaks upward so the waves are even.
- Let it dry completely, at least 24 hours, before unpinning.
Final Quality-Control Checklist
- Each base is 6.3 in (16.0 cm) x 4.3 in (10.9 cm).
- Each basket has 7 even fans and a 98-st rim.
- The panel is 6.5 in (16.5 cm) wide before the border and 7.5 in (19.1 cm) after.
- The baskets are level, centered, and 11 rows apart.
- The mesh lies flat around every seam.
- Border Row 2 has 244 sts, and the corners are flat.
- The ring is centered and the tab is secure.
- No tails show on the front.
Troubleshooting
Base cups: Your stitches are too tight at the curved ends. Go up half a hook size and check that each round has exactly 6 increases.
Base ruffles: You have extra increases. Recount, and make sure each straight side stays at 8 sts.
Fans look crowded: Rnd 15 must have exactly 70 sts, and you must skip 4 sts on each side of every fan.
Basket tips forward: The rim line is sewn too low or too loosely. Sew Rnd 15 to the row exactly 2 rows above the base line.
Mesh edge slants: Check that every Row 2 repeat starts with ch 3 and ends with ch 3, dc.
Border waves: Work 3 sc, 3 sc, 2 sc across each group of 3 row ends.
Care
Hand wash, or machine wash cold on a gentle cycle in a laundry bag. Reshape and dry flat, and avoid hot tumble drying.

Final Notes
Each measurement in this pattern builds on the one before. A gauge of 16 sc per 4 in (10.2 cm) gives a 6.3 x 4.3 in (16.0 x 10.9 cm) base. Seven fans over 70 sts make the wave rim. Five mesh repeats make a 6.5 in (16.5 cm) panel, and 32 rows make it 24 in (61.0 cm) tall. Sewing 7 sts per loop fits each 35-st basket back to the mesh. The border, at 3 sc per mesh row, brings the width to 7.5 in (19.1 cm). If you check each stage as you go, the holder will hang straight and hold its rolls neatly.
Happy crocheting!