Tulip Bouquet Plastic Bag Holder Crochet Pattern

This plastic bag holder hangs on a hook and lets you pull bags out one at a time through a slot near the bottom. The body is a dusty rose tube with a domed cream base and a cream top band. A small bouquet of three yellow tulips with sage-green stems and leaves is sewn on the front.

The style is cottage-kitchen: warm, soft colors in a dense, sturdy fabric. You only need single crochet for the body. The tulips, stems, and leaves use a few taller stitches and take very little yarn. This pattern uses US crochet terms.

The finished holder measures 5 in (12.7 cm) wide when laid flat and 13.5 in (34.3 cm) tall, not counting the tab and ring. The hanging ring is 3 in (7.6 cm) across.

You’ll start with a flat circle for the base and keep working up in joined rounds to make the tube. The slot is worked back and forth in short rows, and a chain closes its top. After a cream top band and a short border, you’ll add the slot edging and tab, cover the ring, and sew on the appliqués.

Finished Size and Construction

  • Finished size: 5 in (12.7 cm) wide flat x 13.5 in (34.3 cm) tall
  • Skill level: Advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton or cotton blend
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 1 tube body (no joining), plus small sewn-on parts: 1 tab, 1 covered ring, 3 tulips, 3 stems, 2 leaves
  • Layout: Single tube, slot centered on the front, bouquet centered above the slot
  • Piece size: 40 stitches around, 5 in (12.7 cm) flat width
  • Size before border: 5 in x 13.3 in (12.7 cm x 33.8 cm)
  • Border depth: 0.2 in (0.5 cm) at the top edge, plus a 2-round edging around the slot

Materials

Choose a smooth cotton or cotton blend so the holder keeps its shape when it’s full of bags. The quantities below assume about 85 m per 50 g ball. If your yarn has a different yardage, go by meters, not grams.

  • Color A, dusty rose (body, slot edging, tab): 100 g, 170 m
  • Color B, cream (base, top band, ring cover): 40 g, 68 m
  • Color C, buttercup yellow (tulips): 15 g, 26 m
  • Color D, sage green (stems, leaves): 15 g, 26 m

Tools:
– 4.5 mm (US 7) crochet hook
– 3 in (7.6 cm) wooden or plastic ring
– Tapestry needle
– Stitch marker
– Rustproof pins
– Scissors
– Rolled towel or cardboard tube for blocking

These quantities include a margin of about 15 percent for your gauge swatch and weaving in ends.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • inc – 2 sc in the same stitch
  • st(s) – stitch(es)
  • BLO – back loop only
  • Rnd – round
  • RS / WS – right side / wrong side

Special stitch – Petal point: Work (hdc, dc, hdc) in the same stitch for a side petal. For the taller center petal, work (dc, tr, dc) in the same stitch.

Gauge and Checkpoints

Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) in sc worked in the round.

Use the base as your test piece. Work Rnds 1–5 below and lay the circle flat. It should measure 3.2 in (8.1 cm) across. If it’s larger, go down 0.5 mm in hook size. If it’s smaller, go up 0.5 mm. Then start a new base and check it again. Keep your tension firm. A loose fabric will sag once it’s holding bags.

Checkpoints (wall height is measured up from the edge of the base):
– After Rnd 5: 40 sts, base 3.2 in (8.1 cm) across
– After Rnd 9: cream wall 0.9 in (2.3 cm) tall
– After Rnd 21: wall 3.6 in (9.1 cm) tall, flat width 5 in (12.7 cm)
– After Rnd 40: wall 7.8 in (19.8 cm) tall
– After Rnd 63: whole tube 13.3 in (33.8 cm) tall when flat
– After the border: 13.5 in (34.3 cm) tall when flat

If the flat width drifts past 5.25 in (13.3 cm), your tension has loosened, so tighten up. Don’t change the stitch count to fix it.

Three crocheted yellow tulips with green stems appliquéd on a mauve knitted background.

Body

Join each round with a sl st to the first sc. Start every round with ch 1, which doesn’t count as a stitch.

Base (Color B)

Rnd 1: Make a magic ring and work 8 sc into it. Join. (8)
Rnd 2: Inc in each st around. (16)
Rnd 3: Sc 1, inc; repeat from * around. (24)
Rnd 4: Sc 2, inc; repeat from * around. (32)
Rnd 5: *Sc 3, inc; repeat from * around. (40)

The base is now 3.2 in (8.1 cm) across.

Lower Wall (Color B)

Rnds 6–9: Sc in each st around. (40)

With no increases, the edge curls up, and the base takes on its soft domed shape. Change to Color A on the final yarn-over of the Rnd 9 join.

Rose Wall (Color A)

Rnds 10–15: Sc in each st around. (40)

Dispensing Slot (Color A)

From here you’ll work in rows over the first 28 sts and leave the last 12 sts of Rnd 15 unworked. Those 12 sts are the bottom of the slot.

Row 16 (RS): Ch 1, sc in the first 28 sts. Turn. (28)
Rows 17–20: Ch 1, sc in each of the 28 sts. Turn at the end of every row except Row 20. (28)

Row 20 is a RS row. At the end of Row 20, ch 12. Then sl st to the first sc of Row 20 to close the top of the slot.

Rnd 21 (conversion round): Ch 1. Work 28 sc (1 sc in each sc), then 12 sc (1 sc in each ch). Join. (28 + 12 = 40)

The slot is 12 sts wide by 5 rows tall, which is 3 in x 1.1 in (7.6 cm x 2.8 cm). When you flatten the tube with the slot in the center, that face is the front.

Rnds 22–60: Sc in each st around. (40)

The rose section, Rnds 10–60, is 11.3 in (28.7 cm) tall.

Top Band (Color B)

On the final yarn-over of the Rnd 60 join, change to Color B.

Rnds 61–63: Sc in each st around. (40)

Check your size now: 5 in x 13.3 in (12.7 cm x 33.8 cm) when flat.

Tab and Ring

Ring Cover (Color B)

Join Color B around the ring. Work sc tightly over the ring until it’s completely covered, about 42 sc. The exact count isn’t important, as long as no ring shows through. Join with a sl st and fasten off, leaving an 8 in (20.3 cm) tail. Use the tail to tuck the stitch tops toward the inside of the ring.

Tab (Color A)

Ch 7.
Row 1: Sc in the 2nd ch from the hook and in each ch across. Turn. (6)
Rows 2–16: Ch 1, sc in each st. Turn. (6)

The tab is 1.5 in x 3.6 in (3.8 cm x 9.1 cm). Fasten off and leave a 12 in (30.5 cm) tail.

Appliqués

Tulips (make 3, Color C)

Ch 4.
Row 1: Sc in the 2nd ch from the hook and in the next 2 ch. Turn. (3)
Row 2: Ch 1, inc, sc 1, inc. Turn. (5)
Row 3: Ch 1, inc, sc 3, inc. Turn. (7)
Rows 4–5: Ch 1, sc in each st. Turn. (7)
Row 6 (points): Sl st in st 1, side petal point in st 2, sl st in st 3, center petal point in st 4, sl st in st 5, side petal point in st 6, sl st in st 7. (13 sts: 4 sl st + 3 petal points of 3 sts each)

Each tulip is 1.75 in (4.4 cm) wide and 1.5 in (3.8 cm) tall. Use the yarn tail to work surface sl sts from the valleys at st 3 and st 5 down to Row 2. These two lines split the head into three petals. Fasten off.

Stems (Color D)

Center stem: Ch 23. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (22) This makes 4.5 in (11.4 cm).
Side stems (make 2): Ch 18. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (17) This makes 3.5 in (8.9 cm).

Both stem lengths work out to about 5 sl sts per inch. If your stems come out shorter or longer, adjust the starting chain.

Leaves (make 2, Color D)

Ch 9.
Rnd 1: Working in the 2nd ch from the hook and along one side: sc, hdc, dc 3, hdc, sc (7). Work 3 sc in the last ch (3). Rotate the work. Along the other side of the foundation chain: sc, hdc, dc 3, hdc, sc (7). Join to the first sc. (17)

Each leaf is 2 in (5.1 cm) long. With a strand of Color D, backstitch a center vein along the foundation chain.

Border

Border gauge: Same as the body, 16 sc and 18 rnds = 4 in (10.2 cm).

Top Edge Border (Color B)

Border Rnd 1 (Rnd 64): Sc in each st around. Join. (40)
Border Rnd 2 (Rnd 65): Sl st in the BLO of each st around. (40) Fasten off.

When the tube is flat, each side, front and back, has 20 sts. One sc round adds 0.2 in (0.5 cm), and the sl st round adds a firm edge but no measurable height. The total becomes 13.5 in (34.3 cm). The count stays at 40, so the width stays at 5 in (12.7 cm), and the rim won’t flare or pull in.

Slot Edging (Color A)

With the RS facing, join Color A at the lower right corner of the slot.

Edging Rnd 1: Work 12 sc across the 12 unworked sts of Rnd 15. Work 5 sc up the side, 1 in each row end of Rows 16–20. Work 12 sc across the unused loops of the 12 ch. Work 5 sc down the other side, 1 in each row end. Join. (12 + 5 + 12 + 5 = 34)
Edging Rnd 2: Sl st in the BLO of each st around. (34) Fasten off.

The math works because every stitch matches one existing stitch, chain, or row end. That keeps the edges flat. Don’t add extra stitches at the corners, so the corners pull in slightly and give the slot its rounded oval shape.

Assembly

  1. Fold the tab over the ring. Center the tab ends on the inside back of the rim, directly opposite the slot. Let them overlap the inside by 1 in (2.5 cm). Whipstitch both tab ends and the sides of the overlap to the inside of the wall. About 1.25 in (3.2 cm) of tab shows above the rim.
  2. Pin the center stem in the middle of the front, ending 1.5 in (3.8 cm) above the top of the slot.
  3. Pin the side stems so their bottom ends meet the bottom of the center stem. Angle them out to the left and right.
  4. Pin one tulip on top of each stem. The top of the center tulip sits 2 in (5.1 cm) below the rim, and the side tulips sit about 1 in (2.5 cm) lower. The whole bouquet is about 6 in (15.2 cm) tall and 4 in (10.2 cm) wide.
  5. Pin one leaf on each side, near the bottom of the stems, with the points angled up and out.
  6. Use matching yarn to sew each part along its outer edge, catching only the outer layer of the tube. Slide a hand inside as you sew so you don’t stitch the tube closed.

Final Blocking

  1. Weave in all the ends on the inside of the tube.
  2. Lightly mist the tube with water, or hover a steam iron over it without touching the yarn.
  3. Slide a rolled towel or a cardboard tube about 3.2 in (8.1 cm) across into the body. This sets the round shape.
  4. Pat the domed base into shape, and flatten the slot edging with your fingers.
  5. Pin each tulip point open, and keep the leaf points sharp.
  6. Let it dry completely, at least 12 hours, before you load it with bags.

Final Quality-Control Checklist

  • Flat width is 5 in (12.7 cm) from bottom to top.
  • Height is 13.5 in (34.3 cm), not counting the tab.
  • Every body round has 40 sts, and the slot edging has 34 sts.
  • The slot is centered on the front and opposite the tab.
  • The color changes are clean, with no stray loops at the joins.
  • The bouquet is centered, and all three stems meet at one point.
  • The tab is firmly attached with no gaps, and the ring is fully covered.
  • No appliqué stitches go through to the back wall.

Troubleshooting

  • The tube leans or spirals. Joined rounds usually stay straight, but always join to the first sc. Don’t join to the turning chain.
  • The slot gapes or ripples. Your edging tension is too loose. Redo Edging Rnd 1 with a hook 0.5 mm smaller.
  • The slot is too tight for your hand. Add 2 more rows to the slot section, as Rows 21–22, worked over the same 28 sts. Then add 2 to each side count in the edging, for 38 total. Number all the following rounds 2 higher.
  • The base won’t dome. Check that Rnds 6–9 have no increases.
  • The tulip points are floppy. Tighten the sl sts between the points, and block the points while they’re damp.
  • The rim flares. Check the border count. It should be exactly 40.

Care

Hand wash in cool water, press out the water in a towel, and dry it flat over a rolled towel. If you used a wooden ring, keep the ring as dry as you can.

Pink and cream crocheted storage baskets with a matching pouch featuring yellow tulips, styled on marble.

Final Notes

The measurement chain is simple. A 40-stitch base, 3.2 in (8.1 cm) across, makes a tube 5 in (12.7 cm) wide. The walls, slot included, bring it to 13.3 in (33.8 cm), and the one-round top border finishes it at 13.5 in (34.3 cm). The slot edging and bouquet are worked to fit inside that frame, so you won’t need to change any counts as long as your gauge matches. Hang it on a cabinet door and enjoy the tulips every time you grab a bag.

Happy crocheting!

Leave a Comment