This little fawn is a plastic bag holder. Bags go in at the top, under the head. They show through an open diamond mesh and come out one at a time through a ribbed cuff at the bottom. The head is a firmly stuffed ball with cream antlers, cream-lined ears and a soft muzzle.
The sample is golden tan with cream accents and dark brown hooves and nose. A sage green body with the same cream details works just as well. The style is cozy amigurumi: smooth single crochet on the solid parts and airy chain loops on the body.
This pattern uses US crochet terms. The finished holder is about 16 in (40.6 cm) long from the top of the head to the bottom of the cuff, not counting the antlers or cord. It is about 8 in (20.3 cm) wide across the empty mesh.
You work the cuff in the round, then 12 mesh rounds upward, then a short neck. The stuffed head and the small details are made separately and sewn on.
Finished Size and Construction
- Finished size: about 16 in (40.6 cm) long x 8 in (20.3 cm) wide (empty mesh)
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 1 holder made from 17 components sewn together
- Layout:
- Head at the top, mesh body in the middle, cuff at the bottom
- Arms at the shoulders, legs low on the sides, tail at the lower right
- Cuff size: 36 sts around, 4.5 in (11.4 cm) wide flat, 1.5 in (3.8 cm) tall
- Size before border: about 15.5 in (39.4 cm) long, assembled
- Border: 2 cream rounds on the cuff edge, about 0.5 in (1.3 cm) deep
Materials
Use a smooth worsted-weight cotton or cotton blend. It shows the stitches, holds the mesh open and doesn’t stretch under the weight of the bags. Avoid fluffy yarn, because it hides the mesh knots.
- Golden tan (main color): about 130 g / 220 m
- Cream: about 25 g / 43 m (antlers, inner ears, muzzle, cheeks, tail tip, cuff edging)
- Dark brown: about 5 g / 9 m (hooves and nose)
- Black: a short length for the lashes and mouth
Tools:
- 4.0 mm (G-6) hook
- Two 12 mm black safety eyes
- About 30 g fiberfill
- Tapestry needle
- Stitch marker
- Straight pins
- Scissors
All yarn amounts include about a 15% margin for swatching and sewing tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- dec – sc2tog (invisible decrease recommended)
- MR – magic ring
- st(s) / rnd(s) – stitch(es) / round(s)
Special stitch: mesh knot (mk): Work (sc, ch 1, sc) in the center of the indicated chain loop. This makes the small raised knot at every diamond point.
Gauge and Checkpoints
Gauge: 16 sc x 18 rnds = 4 in (10.2 cm), worked in sc rounds.
The cuff is your test piece. After Rnd 7, flatten it. It should measure 4.5 in (11.4 cm) across and 1.5 in (3.8 cm) tall.
- If it’s too big, go down to a 3.75 mm hook.
- If it’s too small, go up to a 4.5 mm hook.
Use that hook for the whole project.
Checkpoints:
- Mesh Rnd M5: about 8 in (20.3 cm) wide flat
- Mesh Rnd M12: about 9.5 in (24.1 cm) tall above the cuff
- Neck Rnd N4: 3 in (7.6 cm) wide flat
- Head Rnd 8: 12 in (30.5 cm) around
If the mesh is longer than 9.5 in (24.1 cm), shorten every loop by 1 chain. If it’s shorter, add 1 chain to every loop.

Cuff and Mesh Body
Cuff (tan)
Foundation: Ch 36. Join with a sl st to the first ch, without twisting the chain.
Rnd 1: Ch 1, sc in each ch around, then join with a sl st to the first sc. (36 sts)
Rnds 2–7: Ch 1, sc in each st around, join. (36 sts)
The cuff is now 1.5 in (3.8 cm) tall. Don’t fasten off.
Mesh (tan)
Every mesh round has 12 loops and 12 knots.
Rnd M1: Ch 1, sc in the same st. Ch 5, skip 2 sts, sc in the next st. Repeat from * 10 more times. Ch 5, skip the last 2 sts, and sl st to the first sc. (12 sc and 12 ch-5 loops; 12 x 3 = 36 sts used)
Rnd M2: Sl st to the center of the first loop. Ch 1, mk in the same loop. Ch 6, mk in the next loop. Repeat from * 10 more times. Ch 6, then sl st to the first sc. (12 mk and 12 ch-6 loops)
Rnds M3–M12: Work each round like Rnd M2, changing only the loop length:
| Round | Loop length |
|---|---|
| M3 | ch 7 |
| M4 | ch 8 |
| M5–M8 | ch 9 |
| M9 | ch 8 |
| M10 | ch 7 |
| M11 | ch 6 |
| M12 | ch 5 |
Each of these rounds still has 12 loops and 12 knots. The longer loops make the belly bulge, and the shorter loops draw in the top, so you get the egg shape without changing the loop count.
Neck (tan)
Rnd N1: Sl st into the first loop. Ch 1, then work 3 sc in each loop around, and join. (36 sts: 12 loops x 3 sc)
Rnd N2: Ch 1. Sc in the next st, dec over the next 2 sts. Repeat from * 12 times total, then join. (24 sts: 12 sc + 12 dec)
Rnds N3–N4: Ch 1, sc in each st around, join. (24 sts)
Fasten off, leaving a 24 in (61.0 cm) tail.
Head
Head (tan): Work in continuous rounds, moving a marker up each round. Rnd 1 is the bottom of the head.
Rnd 1: 6 sc in MR. (6)
Rnd 2: Inc in each st. (12)
Rnd 3: (Sc 1, inc) 6 times. (18)
Rnd 4: (Sc 2, inc) 6 times. (24)
Rnd 5: (Sc 3, inc) 6 times. (30)
Rnd 6: (Sc 4, inc) 6 times. (36)
Rnd 7: (Sc 5, inc) 6 times. (42)
Rnd 8: (Sc 6, inc) 6 times. (48)
Rnds 9–14: Sc in each st. (48)
Insert the safety eyes between Rnds 11 and 12, with 8 sts between them.
Rnd 15: (Sc 6, dec) 6 times. (42)
Rnd 16: (Sc 5, dec) 6 times. (36)
Rnd 17: (Sc 4, dec) 6 times. (30)
Rnd 18: (Sc 3, dec) 6 times. (24)
Stuff the head firmly.
Rnd 19: (Sc 2, dec) 6 times. (18)
Rnd 20: (Sc 1, dec) 6 times. (12)
Rnd 21: Dec 6 times. (6)
Close the opening and fasten off. The stuffed head is about 4 in (10.2 cm) across.
Ears, Antlers, and Face
Inner ear (cream, make 2): Ch 8. Starting in the 2nd ch from the hook, work sc, hdc, dc, dc, hdc, sc. Work 3 sc in the last ch. Then, working along the other side of the chain, work sc, hdc, dc, dc, hdc, sc. (15 sts: 6 + 3 + 6)
Outer ear (tan, make 2): Ch 10. Starting in the 2nd ch from the hook, work sc, hdc, dc, dc, dc, dc, hdc, sc. Work 3 sc in the last ch. Then, working along the other side, work sc, hdc, dc, dc, dc, dc, hdc, sc. (19 sts: 8 + 3 + 8)
Center each cream ear on a tan ear with the tips lined up. Whipstitch it in place so a 0.25 in (0.6 cm) tan rim shows all around. Each ear is about 2.5 in (6.4 cm) long.
Antler (cream, make 2):
- Ch 11.
- Sc in the 2nd ch from the hook and in the next 3 ch. (4 sc)
- Make a branch: ch 4, then sc in the 2nd ch from the hook and in the next 2 ch.
- Sc in the next 3 ch of the beam.
- Repeat steps 3 and 4 once. (10 sc along the beam + 2 branches of 3 sc)
- Sl st back along the other side of the beam to make it firmer.
Each antler is about 2.5 in (6.4 cm) long.
Muzzle (cream): Ch 5.
Rnd 1: Work 2 sc in the 2nd ch from the hook, sc in the next 2 ch, and 4 sc in the last ch. Working along the other side, sc in the next 2 ch and 2 sc in the last ch. (12)
Rnd 2: Inc 2 times, sc 2, inc 4 times, sc 2, inc 2 times. (20)
Rnd 3: Sc in each st, then sl st to finish. (20)
The muzzle is about 2 in (5.1 cm) x 1.25 in (3.2 cm).
- Satin-stitch a rounded triangle nose in dark brown.
- Stitch a short mouth below it in black.
Cheeks (cream, make 2): 6 sc in MR, then inc in each st. (12) Sl st and fasten off.
Limbs, Tail, and Cord
Arm (make 2):
Rnd 1: With dark brown, 6 sc in MR. (6)
Rnd 2: (Sc 1, inc) 3 times. (9)
Rnd 3: Sc 9. Change to tan.
Rnd 4: (Sc 2, inc) 3 times. (12)
Rnds 5–11: Sc 12.
Stuff the lower half lightly. Flatten the top and sc 6 sts across through both layers to close it. Each arm is about 2.75 in (7.0 cm) long.
Leg (make 2): Work Rnds 1–4 as for the arm, then continue:
Rnd 5: (Sc 3, inc) 3 times. (15)
Rnds 6–12: Sc 15.
Rnd 13: (Sc 3, dec) 3 times. (12)
Stuff lightly, flatten and sc 6 sts across to close. Each leg is about 3 in (7.6 cm) long.
Tail: Work Rnds 1–4 as for the arm, using cream instead of dark brown.
Rnds 5–8: Sc 12.
Flatten and sc 6 sts across to close. The tail is about 1.75 in (4.4 cm) long.
Hanging cord (tan): Ch 60. Sl st in the 2nd ch from the hook and in each ch back along the chain. The cord is about 13 in (33.0 cm) long.
Make All Pieces
| Component | Color | Qty |
|---|---|---|
| Cuff, mesh and neck | Tan | 1 |
| Head | Tan | 1 |
| Outer ears, arms, legs | Tan (arms and legs with brown hooves) | 2 each |
| Tail | Tan with cream tip | 1 |
| Cord | Tan | 1 |
| Inner ears, antlers, cheeks | Cream | 2 each |
| Muzzle | Cream | 1 |
Placement layout (front view):
[cord loop]
ANTLER ANTLER
EAR [ HEAD ] EAR
CHEEK [ MUZZLE ] CHEEK
ARM [ NECK ] ARM
[ MESH ]
[ BODY ] TAIL
LEG [ MESH ] LEG
[ CUFF ]
Assembly
Method: Whipstitch with matching yarn. Pin every piece in place before you sew it.
Head to neck: Neck Rnd N4 and head Rnd 4 both have 24 sts. Sew them together one neck st to one head st, all the way around. Because the counts match, the head sits straight with no puckers. Go around twice with the long tail for a firm join.
Face:
- Sew the muzzle over Rnds 5–10, centered below the eyes.
- Sew a cheek on each side of the muzzle, level with Rnd 9.
- Embroider a small black lash at the outer corner of each eye.
Ears and antlers:
- Pinch each ear base in half and sew the ears to the sides of the head over Rnds 16–18.
- Sew the antlers upright over Rnds 18–20, 6 sts apart.
Limbs and tail:
- Sew the arms just below the neck, angled down across the front of Rnd M11.
- Sew the legs over Rnds M2–M3 on each side, with the hooves pointing down and out.
- Sew the tail to the lower right at Rnd M4.
Attach these pieces only at the mesh knots. Keep your stitches snug but not tight so the net doesn’t pucker.
Cord: Sew both ends of the cord behind the antlers to make a hanging loop about 6.5 in (16.5 cm) deep.
Size checkpoint: The holder should now measure about 15.5 in (39.4 cm) from the top of the head to the bottom of the cuff.
Border
Border gauge: 16 sc = 4 in (10.2 cm), the same as the cuff.
Join cream to the foundation chain at the bottom of the cuff.
Rnd 1: Ch 1, sc in each foundation ch around, join. (36 sts; 18 per side when flattened)
Rnd 2: Ch 1, sc in each st around, join. (36 sts; 18 per side)
Fasten off.
Why the math works:
- The cuff is a tube, so it has no corner stitches. When you flatten it, the folds fall between stitches and each side holds exactly 18 sts.
- The edging works 1 sc into each of the 36 cuff sts and adds none. It stays 9 in (22.9 cm) around, or 4.5 in (11.4 cm) flat, so it won’t ruffle or pull in.
- The two rounds add about 0.5 in (1.3 cm), bringing the total length to about 16 in (40.6 cm).
Final Blocking
- Mist the mesh and cuff with water. Keep the stuffed parts dry.
- Fill the body loosely with a rolled towel.
- Ease each diamond into shape so every mesh knot sits centered.
- Pin the flattened cuff to 4.5 in (11.4 cm) wide.
- Let it dry completely, then remove the towel.
Final Quality-Control Checklist
- Every mesh round has 12 loops and 12 knots.
- The cuff and both border rounds have 36 sts.
- The neck and head Rnd 4 have 24 sts each and are sewn stitch to stitch.
- The eyes are level and 8 sts apart, with the backs secure.
- The ears, antlers and limbs are symmetrical.
- The cord is anchored twice at each end.
- The total length is about 16 in (40.6 cm).
Troubleshooting
- The mesh spirals: A loop was skipped or worked twice. Count 12 knots every round.
- The body is too narrow: Your chains are tight. Add 1 chain to each loop in Rnds M5–M8.
- The head tilts: Re-pin the neck to head Rnd 4 at 4 evenly spaced points, then sew it again.
- Bags slip out on their own: Add a third cream round: (sc 7, dec) 4 times. (32)
- The cuff edge flares: Redo the border with a 3.75 mm hook.
Care
Hand wash in cool water and lay flat to dry. Don’t wring the mesh or put the stuffed head in the dryer.

Final Notes
Gauge gives you a 4.5 in (11.4 cm) cuff. Twelve graduated mesh rounds build a 9.5 in (24.1 cm) body. The neck closes to 24 sts to match the head exactly. The 36-st cream edging finishes the holder at about 16 in (40.6 cm). Check each stage before you move on, and your fawn will hang straight and hand out bags smoothly.
Happy crocheting!