This hanging holder stacks three small lace baskets between two plum straps. A single wooden ring at the top holds everything together. Each basket holds one standard toilet roll standing upright, and the top of the roll sits just above the rim.
The baskets are worked in a soft mint cotton. Their walls are open starburst lace, made from alternating rounds of fans and clusters. Deep plum trims the bottom seam and the top rim of every basket, and the two flat ribbed straps are plum too. Next to the mint, the plum outlines each tier, so the piece looks neat on a bathroom wall.
The pattern uses US crochet terms. Each finished basket measures about 6.5 in x 5.5 in (16.5 cm x 14.0 cm) and 3.75 in (9.5 cm) tall. The assembled holder is about 7 in (17.8 cm) wide and about 25 in (63.5 cm) tall from the top of the ring to the bottom basket.
Construction is modular. You make three solid sc bases and three lace wall tubes, then join each base to its wall with a plum sc seam round, and finish each basket with a plum top rim. Two long plum straps are sewn to the short ends of all three baskets, and their tops are folded over one wooden ring.
Finished Size and Construction
- Finished size: about 7 in x 25 in (17.8 cm x 63.5 cm) when hanging
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 3 bases, 3 lace walls, 2 straps, 1 wooden ring
- Layout: 3 baskets stacked vertically, 1.75 in (4.4 cm) apart
- Base size: 6 in x 5 in (15.2 cm x 12.7 cm)
- Basket size before border: 6.5 in x 5.5 in (16.5 cm x 14.0 cm), 3.25 in (8.3 cm) tall
- Border depth: 2 rounds, 0.5 in (1.3 cm)
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton keeps the lace crisp and the basket walls upright, and it handles bathroom humidity well. Pick yarn of about 170 m per 100 g.
- Mint (Color A): 250 g, about 425 m (bases and lace walls)
- Plum (Color B): 150 g, about 255 m (seam rounds, rims, straps)
These quantities include a margin of about 15%.
Tools:
- 4.5 mm (US 7) crochet hook
- 1 wooden ring, 2 in (5.1 cm) diameter
- 8 stitch markers
- Tapestry needle
- Scissors
- Tape measure
- Pins and a blocking mat
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- rnd – round
- rep – repeat
- dc4tog – double crochet 4 together
Special stitches:
- Fan: (dc, ch 1) 4 times in the same st, then dc in that st once more. This gives 5 dc and 4 ch-1 sps.
- dc4tog: (yo, insert hook in the next indicated st, yo, pull up a loop, yo, draw through 2 loops) 4 times, then yo and draw through all 5 loops on the hook.
Gauge and Checkpoints
Sc gauge: 16 sc x 16 rnds = 4 in (10.2 cm).
Lace gauge: one 10-st repeat = 2.5 in (6.4 cm) wide. Wall Rnds 2–5 = 2.5 in (6.4 cm) tall.
Make one complete base and one wall before you make the rest. Measure both and check them against each other.
Checkpoints:
- Base after Rnd 5: 4 in x 3 in (10.2 cm x 7.6 cm)
- Base after Rnd 9: 6 in x 5 in (15.2 cm x 12.7 cm)
- Wall after Rnd 6, laid flat: 10 in (25.4 cm) wide, 3 in (7.6 cm) tall
- Basket after the border: 3.75 in (9.5 cm) tall
If your pieces come out too big, go down 0.5 mm. If they’re too small, go up 0.5 mm. The base and the wall both have 80 sts on their joining edges, so getting the gauge right matters more than matching an exact hook size.

Base (Make 3)
Work in joined rnds with the right side facing. Don’t turn. Join each rnd with a sl st to the first sc. The beginning ch 1 doesn’t count as a st.
Rnd 1: With Mint, ch 7. Sc in 2nd ch from hook, sc in next 4 ch, 4 sc in last ch. Rotate and work along the other side of the chain: sc in next 4 ch, 3 sc in same ch as first sc. Join. (16 sts)
The base has two long sides, two short sides and four corners. Each corner is 2 sts wide. In Rnd 1 the long sides have 4 sts each and the short sides have 0.
Rnds 2–9: Ch 1, 2 sc in first st, sc in next L sts, 2 sc in each of next 2 sts, sc in next S sts, 2 sc in each of next 2 sts, sc in next L sts, 2 sc in each of next 2 sts, sc in next S sts, 2 sc in last st. Join.
L and S are the previous rnd’s long-side and short-side counts. Each rnd adds 8 sts:
| Rnd | L used | S used | Rnd total |
|---|---|---|---|
| 2 | 4 | 0 | 24 |
| 3 | 6 | 2 | 32 |
| 4 | 8 | 4 | 40 |
| 5 | 10 | 6 | 48 |
| 6 | 12 | 8 | 56 |
| 7 | 14 | 10 | 64 |
| 8 | 16 | 12 | 72 |
| 9 | 18 | 14 | 80 |
After Rnd 9 there are 20 sts on each long side, 16 sts on each short side and 2 sts at each corner: 20 + 2 + 16 + 2 + 20 + 2 + 16 + 2 = 80 sts. The base measures 6 in x 5 in (15.2 cm x 12.7 cm). Fasten off and weave in the ends.
Moving the increases outward every round gives rounded corners instead of sharp points, which is what gives the base its soft rounded-rectangle shape.
Lace Wall (Make 3)
Work in joined rnds with the right side facing.
Foundation: With Mint, ch 80. Join with a sl st to the first ch to form a ring, taking care not to twist the chain.
Rnd 1: Ch 1, sc in each ch around. Join. (80 sc)
Rnd 2 (fan rnd): Ch 1, sc in first st, skip 4 sts, Fan in next st, skip 4 sts, sc in next st. Rep from * around, ending the last rep at . Join. (8 sc, 8 Fans)*
Each repeat uses 1 + 4 + 1 + 4 = 10 sts, and 8 repeats use all 80 sts.
Rnd 3 (cluster rnd): Sl st in each of next dc, ch-1 sp, dc and ch-1 sp, so you reach the center (3rd) dc of the first Fan. Ch 1, sc in the center dc. Ch 3, dc4tog over the 4th and 5th dc of this Fan and the 1st and 2nd dc of the next Fan (skip the sc between them), ch 3, sc in the center dc of the next Fan. Rep from * around, ending at . Join. (8 sc, 8 dc4tog, 16 ch-3 sps)*
The legs of each cluster come together at the top, so it looks like an upside-down Fan.
Rnd 4 (fan rnd): Ch 1, sc in first sc, skip ch-3 sp, Fan in top of next dc4tog, skip ch-3 sp, sc in next sc. Rep from * around, ending at . Join. (8 sc, 8 Fans)*
Each new Fan comes out of the top of a cluster, which completes a starburst. These Fans sit half a repeat over from the Rnd 2 Fans, so the stars form a staggered diamond lattice.
Rnd 5: Rep Rnd 3. (8 sc, 8 dc4tog, 16 ch-3 sps)
Rnd 6 (conversion rnd): Ch 1, sc in next sc, 4 sc in next ch-3 sp, sc in top of next dc4tog, 4 sc in next ch-3 sp. Rep from * 7 more times. Join. This rnd has 16 sts worked one into each existing st (8 sc + 8 dc4tog) plus 64 sts worked into the 16 ch-3 sps. 16 + 64 = 80 sc. Fasten off.
Checkpoint: laid flat, the wall is 10 in (25.4 cm) wide and 3 in (7.6 cm) tall.
Strap (Make 2)
The strap is worked lengthwise in rows.
Row 1: With Plum, ch 101. Sc in 2nd ch from hook and in each ch across. Turn. (100 sc)
Rows 2–5: Ch 1, sc in back loop only of each st across. Turn. (100 sc)
Working in the back loops makes the lengthwise ridges. Fasten off. The strap measures 25 in x 1.25 in (63.5 cm x 3.2 cm).
Mark the attachment zones. Count stitches along one long edge from the bottom end:
- Sts 1–15: bottom basket, 3.75 in (9.5 cm)
- Sts 16–22: gap, 1.75 in (4.4 cm)
- Sts 23–37: middle basket
- Sts 38–44: gap
- Sts 45–59: top basket
- Sts 60–94: rise to ring, 8.75 in (22.2 cm)
- Sts 95–100: fold over ring, 1.5 in (3.8 cm)
Make All Pieces
- Mint: 3 bases, 3 lace walls
- Plum: 3 seam rounds, 3 top rims, 2 straps
- Hardware: 1 wooden ring
Layout (front view):
( RING )
/ \
Strap A Strap B
| [ Basket 3 ] | top
| 1.75 in |
| [ Basket 2 ] | middle
| 1.75 in |
| [ Basket 1 ] | bottom
The long sides of the baskets face the front. The straps run up the center of each short side.
Joining
Order of work: seam round (Part 1), then the top rim (Border section), then straps and ring (Part 2).
Part 1: Base to wall. Place 8 markers on Rnd 9 of the base at the corners: 2 markers around each 2-st corner. Turn the wall so Rnd 1 is at the bottom, and set the base in the opening with wrong sides together. Divide the free foundation-chain loops of the wall the same way: 20, 2, 16, 2, 20, 2, 16, 2.
Join Plum through both layers at the start of a long side. Ch 1. Work 1 sc through each wall foundation loop and the matching base st together: 20 sc along the long side, 1 sc in each of the 2 corner sts, 16 sc along the short side, then repeat for the other half. Join. (80 sc)
The count is one to one, 80 wall sts to 80 base sts, so nothing is added at the corners or skipped. Keep your tension even and relaxed. If the seam is tight, the base will cup and the lace will pull inward.
Checkpoint: the basket footprint is 6.5 in x 5.5 in (16.5 cm x 14.0 cm), and the basket is 3.25 in (8.3 cm) tall before the border.
Part 2: Straps and ring. Do this after the border is finished on all three baskets. Lay Strap A along the center of one short side of the bottom basket, with st 1 even with the bottom seam and st 15 even with the top of the rim. Whipstitch both long edges of the strap to the basket with Plum, sewing through the seam round, the sc rnds and the rim. Attach the middle and top baskets at their marked zones the same way, then sew Strap B to the opposite short sides.
Pass sts 95–100 of each strap through the ring. Fold them to the back and sew them down flat. Check that both straps are exactly 8.75 in (22.2 cm) long between the top basket and the ring, so the holder hangs level.
Border: Plum Top Rim
Border gauge: 16 sc = 4 in (10.2 cm), the same as the base and wall.
Rnd 1: Join Plum at the start of a long side on wall Rnd 6. Ch 1, sc in each st: 20 along each long side, 2 at each corner, 16 along each short side. Join. (80 sc)
Rnd 2: Ch 1, sc in each st, with the same per-side counts. Join. (80 sc) Fasten off.
Rim depth: 0.5 in (1.3 cm). Basket height: 3.75 in (9.5 cm).
Why the math works: The wall’s top edge has 80 sts, which is 20 in (50.8 cm) at gauge, the same as the base perimeter. The rim adds no stitches, so it stays flat. It doesn’t flare or pull in, and it holds the open shape of the basket.
Final Blocking
- Wet each basket thoroughly and gently squeeze out the water. Don’t wring it.
- Roll it in a towel to remove extra moisture.
- Stuff each basket with a toilet roll wrapped in plastic, or a folded towel, so it holds its 6.5 in x 5.5 in (16.5 cm x 14.0 cm) shape.
- Pin the starbursts evenly so the Fan spokes open fully.
- Dry completely, then lay the straps flat and pin them to 25 in (63.5 cm).
- Remove pins and assemble the straps as described above.
Final Quality-Control Checklist
- Every base has 80 sts and measures 6 in x 5 in (15.2 cm x 12.7 cm)
- Every wall has 8 complete starburst repeats per lace rnd
- The seam rounds and rims have 80 sc with no extra corner stitches
- All three baskets are 3.75 in (9.5 cm) tall
- Both straps are 25 in (63.5 cm) long, and their marked zones line up
- The gaps between baskets are 1.75 in (4.4 cm) on both straps
- The holder hangs level from the ring
- All ends are woven in securely
Troubleshooting
Base ruffles: Your increases are too loose for your tension. Go down a hook size, or check that each rnd adds exactly 8 sts.
Base cups: Your tension is too tight. Go up a hook size.
Stars look lopsided: Check that each dc4tog uses 2 dc from each neighboring Fan.
Wall doesn’t match the base: Count both pieces at 80 sts. Add or remove stitches in the wall’s Rnd 6 only if the difference is 1–2 sts.
Holder tilts: Make the straps the same length between the top basket and the ring.
Rim flares: Redo it with a smaller hook.
Care
Hand wash in cool water and lay flat to dry, reshaping each basket around a roll. Keep the holder away from direct shower spray so the cotton dries between uses.

Final Notes
Here’s the measurement chain: 16 sc = 4 in (10.2 cm). The base grows to 80 sts, 6 in x 5 in (15.2 cm x 12.7 cm). The 80-st wall matches it one to one, and the seam round makes a 6.5 in x 5.5 in (16.5 cm x 14.0 cm) basket. The 80-st rim brings it to 3.75 in (9.5 cm) tall. The 25 in (63.5 cm) straps, marked in 15-st basket zones and 7-st gaps, hang the three tiers to about 25 in (63.5 cm) overall. Check each link in this chain and the holder will come out right.
Happy crocheting!