Sweetheart Trio Hanging Toilet Paper Holder Crochet Pattern

The Sweetheart Trio is a hanging storage piece with three heart-shaped baskets stacked on an open diamond-mesh panel. Each basket holds one standard toilet paper roll upright, and the whole holder hangs from a wooden ring on a hook or towel peg.

The sample is in coral pink cotton, and it also works well in cream. The baskets are firm and structured, with a scalloped shell rim, while the lattice-style mesh panel stays light so the holder doesn’t look heavy on the wall.

This pattern uses US crochet terms. The finished holder is 7.5 in (19.1 cm) wide at the baskets and about 23.5 in (59.7 cm) long without the ring, or about 26 in (66.0 cm) including the ring.

Construction: you work three heart bases in rows, edge them, and build straight walls in rounds. Next you crochet the mesh panel in rows, shape it into a triangle at the top and finish it with a tab around the ring. Then you edge the baskets and the panel, and sew the baskets on.

Finished Size and Construction

  • Finished size: 7.5 in (19.1 cm) wide × 23.5 in (59.7 cm) long without the ring
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hooks: 4.5 mm (US 7) for the baskets, 5.0 mm (US H-8) for the mesh panel
  • Number of pieces: 4 (3 baskets + 1 panel)
  • Layout: 1 column of 3 baskets on one panel
  • Basket base size: 7.5 in (19.1 cm) wide × 6 in (15.2 cm) tall
  • Basket depth before the rim: 2.75 in (7.0 cm)
  • Rim (border) depth: 0.75 in (1.9 cm), for a total basket depth of 3.5 in (8.9 cm)
  • Panel rectangle: 7.25 in (18.4 cm) × 19.5 in (49.5 cm)

Materials

Use a smooth 100% cotton or cotton blend in worsted weight. Cotton keeps the basket walls stiff and doesn’t stretch under the weight of the rolls. Acrylic will work, but the baskets will be softer.

  • Coral pink: 150 g / 270 m (295 yd)

The quantity includes about a 15% margin for your gauge swatch and tails. For a cream version, buy the same amount.

Tools:
– 4.5 mm (US 7) crochet hook
– 5.0 mm (US H-8) crochet hook
– Wooden ring, 2.5 in (6.4 cm) outer diameter
– Tapestry needle
– 4 locking stitch markers
– Rustproof pins
– Measuring tape
– Scissors

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • dc: double crochet
  • sc2tog: single crochet 2 together
  • BLO: back loop only
  • st(s): stitch(es)
  • rnd: round
  • RS: right side

Special stitches:
– Shell: 5 dc in the same st.
– Mesh loop: ch 5, sc in the next ch-5 loop.

Gauge and Checkpoints

  • Basket gauge: 16 sc × 18 rows = 4 in (10.2 cm) with the 4.5 mm hook
  • Mesh gauge: 7 mesh loops = 7.25 in (18.4 cm) wide, and 4 rows = 2 in (5.1 cm) with the 5.0 mm hook

Make one complete basket before you start the others. The basket checkpoints are:

  1. After Row 14 of the base: 7 in (17.8 cm) wide.
  2. After Row 19: still 7 in (17.8 cm) wide and about 4.25 in (10.8 cm) tall.
  3. After the edging rnd: 7.5 in (19.1 cm) × 6 in (15.2 cm), lying flat with no cupping.
  4. After the walls: 2.75 in (7.0 cm) tall.

If your base is too big, go down 0.5 mm. If it’s too small, go up 0.5 mm. If the walls feel floppy, go down a hook size for the walls only. A firm fabric is better here than a soft one.

Coral crocheted heart with scalloped lace edging and pink trim against a neutral gray background.

Heart Basket Base (make 3)

With the 4.5 mm hook:

Row 1: Ch 3, sc in 2nd ch from hook and in next ch, turn. (2 sts)
Row 2: Ch 1, 2 sc in each st, turn. (4 sts)
Rows 3–14: Ch 1, 2 sc in first st, sc in each st to last st, 2 sc in last st, turn. Each row has 2 more sts than the row before it: Row 3 = 6 sts, Row 4 = 8 sts, and so on, ending with Row 14 = 28 sts.

These rows build the V-shaped lower half of the heart. Each edge grows by 1 st per row, which gives the point its angle.

Rows 15–19: Ch 1, sc in each st across, turn. (28 sts)

The base should now be 7 in (17.8 cm) wide.

First Lobe

Work over sts 1–14 only.

Row 20: Ch 1, sc in next 14 sts, turn. (14 sts)
Row 21: Ch 1, sc2tog, sc in next 10 sts, sc2tog, turn. (12 sts)
Row 22: Ch 1, sc in each st, turn. (12 sts)
Row 23: Ch 1, sc2tog, sc in next 8 sts, sc2tog, turn. (10 sts)
Row 24: Ch 1, sc2tog, sc in next 6 sts, sc2tog, turn. (8 sts)
Row 25: Ch 1, sc2tog, sc in next 4 sts, sc2tog. (6 sts) Fasten off.

Second Lobe

With RS facing, join the yarn in st 15 of Row 19. Work Rows 20–25 the same way as the first lobe. Don’t fasten off.

The base is now 25 rows, about 5.5 in (14.0 cm) tall.

Edging Rnd

Rnd 1: Work clockwise around the whole heart. Starting at the center dip:

  • 2 sc in the dip, one at the base of each lobe
  • 6 sc along the inner edge of the right lobe, 1 per row end
  • 8 sc across the top of the lobe: 2 sc in first st, sc in next 4 sts, 2 sc in last st
  • 7 sc down the outer edge of the lobe: 1 sc in each of the 6 row ends, with 2 sc in the 3rd row end
  • 5 sc down the straight side (Rows 19–15), 1 per row end
  • 18 sc down the V side: 1 sc in each of the 14 row ends, with 2 sc in every 3rd row end
  • 6 sc around the point: 3 sc in each of the 2 foundation ch
  • 18 sc up the other V side, 5 sc up the other straight side, 7 sc up the outer edge of the left lobe, 8 sc across its top, and 6 sc down its inner edge

Sl st to first sc. (96 sts)

Check: 2 + 6 + 8 + 7 + 5 + 18 + 6 + 18 + 5 + 7 + 8 + 6 = 96. The base should measure 7.5 in (19.1 cm) × 6 in (15.2 cm) and lie flat. Place a marker in the first dip st.

Basket Walls

Rnd 2: Ch 1, sc in BLO of each st around, sl st to first sc. (96 sts) This rnd turns the edge up into a crisp fold.
Rnds 3–13: Ch 1, sc in each st around, sl st to first sc. (96 sts)

There are no increases or decreases in the walls. The heart base sets the shape, and the walls rise straight up from it. Rnds 2–13 are 12 rnds, about 2.75 in (7.0 cm) tall. Don’t fasten off. The rim is worked in the Border section.

Mesh Back Panel (make 1)

With the 5.0 mm hook:

Row 1: Ch 30. Sc in 2nd ch from hook, ch 5, skip 3 ch, sc in next ch 7 times, turn. (8 sc, 7 loops)

This row uses 29 ch: 1 + (7 × 4).

Row 2: Ch 5 (counts as dc + ch 2), sc in first ch-5 loop, ch 5, sc in next loop 6 times, ch 2, dc in last sc, turn. (6 full loops + 2 half loops)
Row 3: Ch 1, sc in dc, ch 5, sc in next ch-5 loop 6 times, ch 5, sc in 3rd ch of turning ch, turn. (7 loops)
Rows 4–39: Repeat Rows 2–3, ending with a Row 3 repeat. Every odd row has 7 full loops.

Checkpoint: the rectangle should measure 7.25 in (18.4 cm) × 19.5 in (49.5 cm) when lightly stretched.

Top Triangle

Row 40: Sl st into each of first 3 ch of the first loop, ch 1, sc in same loop, ch 5, sc in next loop 6 times, turn. (6 loops)
Rows 41–45: Repeat Row 40. Each row has 1 loop fewer than the row before it: Row 41 = 5, Row 42 = 4, Row 43 = 3, Row 44 = 2, Row 45 = 1 loop.

The triangle is 6 rows, about 3 in (7.6 cm) tall.

Ring Tab

Row 46: Sl st to the center of the last loop, ch 1, work 6 sc into the loop, turn. (6 sts)
Rows 47–54: Ch 1, sc in each st, turn. (6 sts)

Fold the tab through the wooden ring and sew Row 54 to the base of Row 46. Wrap the yarn 6 times tightly around the tab base to make the gathered band, and secure it. The tab adds about 1 in (2.5 cm) above the triangle.

Make All Pieces

  • Coral: 3 heart baskets, about 35 g each, and 1 mesh panel, about 35 g

Layout (front view):

        [ring]
         /\
        /  \      triangle (Rows 40–45)
       |    |
       |  H |     Basket 1 at Row 39
       |    |
       |  H |     Basket 2 at Row 25
       |    |
       |  H |     Basket 3 at Row 11
        ‾‾‾‾      point hangs about 0.5 in (1.3 cm) below the panel

Joining

Sew each basket by its back wall, the lobe side, to a full-loop mesh row: Row 39, Row 25 and Row 11. These rows are 14 mesh rows apart, which is 7 in (17.8 cm).

Stitch-to-stitch logic: the back wall is 30 sts of Rnd 13. That’s the 8 top sts of one lobe, its 6 inner-edge sts, the 2 dip sts, the other 6 inner-edge sts and the other 8 top sts.

  1. Center the 2 dip sts over the middle of the 4th loop.
  2. Each half now has 14 sts to spread across 3.5 loops. Sew 4 basket sts per loop, and catch every mesh sc as you pass it.
  3. Whipstitch with a long tail through both loops of each basket st and around the mesh ch or sc.
  4. Tack the lobe tops of the edging rnd to the mesh 5 rows lower. This tilts the basket slightly back so the rolls stay in.

Tension: pull just enough to close the gap between the basket and the mesh. If you pull too hard, the mesh puckers and gets shorter.

Checkpoint: the panel is still 19.5 in (49.5 cm) long between Row 1 and Row 39, and the bottom point sits about 0.5 in (1.3 cm) below the panel.

Tip: you’ll get a neater result if you add the rims and the panel edging (next section) before you sew the baskets on.

Border

Part A: Basket Scallop Rim (each basket)

Border gauge: 1 shell repeat = 6 sts = 1.5 in (3.8 cm).

Rnd 14: With the 4.5 mm hook, ch 1, sc in the first st (the marked dip st). Skip 2 sts, shell in next st, skip 2 sts, sc in next st 15 times, skip 2 sts, shell in next st, skip 2 sts, sl st to first sc. (16 shells + 16 sc) Fasten off.

Why the math works: each repeat uses 6 sts, and 16 × 6 = 96, so the rim covers the whole rnd exactly. The rim starts on dip st 1, so the sc fall on sts 1, 7, 13 and so on. That puts an sc on st 49, which is in the middle of the 6 point sts (47–52). The scallops are therefore symmetrical, with an sc at both the dip and the point. The rim is 0.75 in (1.9 cm) deep.

Part B: Panel Edging

Border gauge: 4 sc = 1 in (2.5 cm).

The corners are counted separately: each bottom corner is a ch-1 that doesn’t count toward either side.

Rnd 1: With the 5.0 mm hook and RS facing, join at the right base of the tab. Work:

  • 18 sc down the slanted edge (3 per row end, Rows 45–40)
  • 78 sc down the long side (2 per row end, Rows 39–1)
  • ch 1
  • 29 sc across the bottom (1 per foundation ch)
  • ch 1
  • 78 sc up the other long side
  • 18 sc up the other slanted edge

Sl st at the tab base. (221 sc + 2 corner ch)

Rnd 2: Sl st in each sc and in each corner ch around. Fasten off.

Why the math works:
– 78 sc ÷ 4 = 19.5 in (49.5 cm), which is the length of the rectangle.
– 29 sc ÷ 4 = 7.25 in (18.4 cm), which is the width of the panel.
– Each slanted edge runs diagonally, so it’s longer than the triangle’s height. The 18 sc measure 4.5 in (11.4 cm) and match that diagonal without ruffling.

Final Blocking

  1. Spray the whole holder until it’s damp, but not soaked.
  2. Pin the panel flat at 7.25 in (18.4 cm) × 19.5 in (49.5 cm). Open each diamond evenly.
  3. Stuff each basket with a toilet paper roll wrapped in a plastic bag so the walls stay straight and upright.
  4. Pinch the point and dip of each heart so they’re crisp.
  5. Pin each scallop open.
  6. Let everything dry completely, which usually takes 24 hours.

Final Quality-Control Checklist

  • Each basket base measures 7.5 in (19.1 cm) × 6 in (15.2 cm).
  • Each basket has 96 sts and 16 shells.
  • The walls are 2.75 in (7.0 cm) tall with a clean BLO fold.
  • The panel has 7 full loops on every odd row.
  • The baskets sit 7 in (17.8 cm) apart.
  • The ring tab is secure, and the wrapped band is tight.
  • All the ends are woven in through the solid sc fabric, not the mesh.

Troubleshooting

  • Base cups: the edging is too tight. Go up a hook size for Rnd 1 only.
  • Base ruffles: you have too many V-side sts. Check that you have exactly 18 sc per V side.
  • Lobes look pointed: the decreases are too tight. Work the sc2tog more loosely.
  • Walls flare: go down a hook size for Rnds 3–13.
  • Mesh is too narrow: your ch-5 loops are tight. Go up a hook size or work your chains more loosely.
  • Shells don’t line up at the point: the rim didn’t start on the dip st. Rip it out and start again on the marker.
  • The holder tilts on the wall: the baskets are off center. Re-center the dip over the 4th loop.

Care

Hand wash in cool water, reshape while damp, and dry flat with a roll inside each basket. Don’t tumble dry.

Cream and coral crocheted baskets and cloth hang from brass hooks in a bright, clean bathroom.

Final Notes

The measurement chain is:

  1. Row 19 of the base is 28 sts, or 7 in (17.8 cm).
  2. The edging rnd brings the base to 96 sts, or 7.5 in (19.1 cm) × 6 in (15.2 cm).
  3. The walls are 12 rnds, or 2.75 in (7.0 cm).
  4. The rim adds 0.75 in (1.9 cm), so each basket is 3.5 in (8.9 cm) deep.
  5. The panel is 7 loops by 39 rows, or 7.25 in (18.4 cm) × 19.5 in (49.5 cm).
  6. The panel edging is 78 sc per long side and 29 sc across the bottom.
  7. The baskets are spaced 7 in (17.8 cm) apart.

If each checkpoint matches, the holder will finish at 7.5 in (19.1 cm) wide by 23.5 in (59.7 cm) long without the ring.

Happy crocheting!

Leave a Comment