Blossom Stripe Letter G Keychain Crochet Pattern

This little letter G keychain combines classic fan stitches with bold two-color stripes and a few tiny daisies. It’s quick to make, easy to personalize, and looks cute clipped to a tote bag, backpack, or set of keys.

The letter alternates deep raspberry pink and soft cream stripes. A raspberry outline frames the whole shape. Three cream daisies with yellow centers and green leaves give it a garden-fresh finish. A gold split ring and a short chain turn it into a working keychain.

The pattern uses US crochet terms. The finished letter measures 3.9 in (9.9 cm) wide by 4.2 in (10.7 cm) tall, not counting the hardware.

You work the G as one flat piece in rows from the bottom up, changing color every row. In the middle rows, you work the right stem and the left stroke as separate sections. Short chains extend two of the rows to form the crossbar and the top bar. One round of single crochet edging neatens the outline. Then you sew on the flowers and leaves and add the key ring.

Finished Size and Construction

  • Finished size: 3.9 in (9.9 cm) wide x 4.2 in (10.7 cm) tall
  • Skill level: Advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (#2) cotton
  • Hook: 2.75 mm (C-2)
  • Number of pieces: 1 letter, plus 3 daisy appliqués and 6 leaves
  • Layout: One letter shape, 6 fan repeats wide and 10 rows tall
  • Piece size before edging: 3.7 in (9.4 cm) wide x 4.0 in (10.2 cm) tall
  • Edging depth: 0.1 in (0.3 cm) on every side

Materials

Use a smooth, mercerized sport weight cotton. It shows the fan stitches clearly and holds its shape on a keychain that gets handled a lot. Choose a yarn with about 3 m per gram (roughly 150 m per 50 g).

  • Color R (raspberry pink): 8 g, about 24 m
  • Color C (cream): 5 g, about 15 m
  • Color Y (yellow): 1 g, about 3 m
  • Color G (leaf green): 2 g, about 6 m

These amounts include extra for tails and a test swatch.

Tools:

  • 2.75 mm (C-2) crochet hook
  • Tapestry needle
  • Scissors
  • Gold split key ring, 1 in (2.5 cm) across
  • Short gold chain, about 1 in (2.5 cm) long
  • 2 gold jump rings, 8 mm
  • 2 pairs of flat-nose pliers
  • Rustproof pins, a foam blocking board, and a spray bottle
  • Optional: fabric stiffener

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • st(s) – stitch(es)
  • rep – repeat
  • R / C / Y / G – colors as listed above

Special stitch – Fan: Work 5 dc in the same stitch.

Standing sc: With a slip knot on the hook, insert the hook into the stitch and work a sc as usual. This joins new yarn without a slip stitch.

Gauge and Checkpoints

Gauge: In the fan pattern, 1 fan repeat (6 sts) = 0.6 in (1.5 cm) wide, and 1 row = 0.4 in (1.0 cm) tall. That’s 10 sts per inch across.

Make Rows 1–2 first as your test piece. If they measure correctly, carry on with the full letter.

Checkpoints:

  • After Row 2: 3.7 in (9.4 cm) x 0.8 in (2.0 cm)
  • After Row 5: right stem 2.0 in (5.1 cm) tall from the bottom edge, crossbar 1.9 in (4.8 cm) wide
  • After Row 8: left stroke 3.2 in (8.1 cm) tall and 1.3 in (3.3 cm) wide
  • After Row 10: 3.7 in (9.4 cm) x 4.0 in (10.2 cm)
  • After edging: 3.9 in (9.9 cm) x 4.2 in (10.7 cm)

If Row 2 is wider than 3.8 in (9.7 cm), go down to a 2.5 mm hook. If it’s narrower than 3.6 in (9.1 cm), go up to a 3.0 mm hook. A difference of 0.1 in (0.3 cm) is fine because blocking will even it out.

Crocheted floral charm featuring white daisy with yellow center, pink chains, and green leaves on a wooden surface.

Pattern Stitch Overview

The letter uses two row types that alternate. Both have a stitch count of 6 x (number of fans) + 1.

  • Row A (odd rows, color R): A sc at each end. Fans go into the sc of the row below, and a sc goes into the center dc of each fan below.
  • Row B (even rows, color C): A half fan (3 dc) at each end. Fans go into the sc of the row below, and a sc goes into the center dc of each fan below.

Cut the yarn at the end of every row and leave a 4 in (10.2 cm) tail. Start each new row with the new color. Leave the tails on the wrong side, because you’ll crochet over them during the edging.

The Letter

Row 1 (R): Ch 38. Sc in the 2nd ch from the hook, sk 2 ch, Fan in the next ch, sk 2 ch, sc in the next ch; rep from * 5 more times. (37 sts: 6 fans, 7 sc)* Fasten off.

Row 2 (C): Turn. Join C in the first sc, ch 3 (counts as dc), 2 dc in the same st, sk 2 dc, sc in the next dc (the center of the fan), sk 2 dc, Fan in the next sc; rep from * 4 more times, sk 2 dc, sc in the center dc, sk 2 dc, 3 dc in the last sc. (37 sts: 5 fans, 2 half fans, 6 sc)* Fasten off.

Checkpoint: 3.7 in (9.4 cm) x 0.8 in (2.0 cm).

In Row 2, the full fans are centered on sts 7, 13, 19, 25, and 31. From here the letter splits into two sections.

Row 3 (R), left section: Turn so that you start at the left end of the letter. Join R with a standing sc in the first dc, sk 2 dc, Fan in the next sc, sk 2 dc, sc in the next dc; rep from * once more. The last sc lands in st 13. (13 sts)* Fasten off.

Row 3 (R), right section: Leave sts 14–24 unworked (11 sts). These open sts form the inside bottom of the G. Join R with a standing sc in st 25 (the center dc of the 4th full fan), sk 2 dc, Fan in the next sc, sk 2 dc, sc in the next st; rep from * once more, ending in st 37. (13 sts)* Fasten off.

Row 4 (C), both sections: Work each section separately. Join C in the first sc, ch 3, 2 dc in the same st, sk 2 dc, sc in the center dc, sk 2 dc, Fan in the next sc, sk 2 dc, sc in the center dc, sk 2 dc, 3 dc in the last sc. (13 sts in each section) Fasten off after each section.

Row 5 (R), left section: Work as for the Row 3 left section. (13 sts) Fasten off.

Row 5 (R), right section and crossbar: With R, ch 7. Sc in the 2nd ch from the hook, sk 2 ch, Fan in the next ch, sk 2 ch. Then sc in the inner-edge dc of the Row 4 right section (the side facing the open mouth of the G). Sk 2 dc, Fan in the next sc, sk 2 dc, sc in the next dc; rep from * once more, ending in the outer-edge dc. (19 sts: 6 on the chain plus 13 over the stem)* Fasten off.

The ch-7 extension makes the crossbar reach one fan repeat into the letter. The right side of the letter ends here.

Checkpoint: right stem 2.0 in (5.1 cm) tall, crossbar 1.9 in (4.8 cm) wide.

Row 6 (C), left section only: Work as for Row 4. (13 sts)

Row 7 (R): Work as for the Row 3 left section. (13 sts)

Row 8 (C): Work as for Row 4. (13 sts)

Checkpoint: left stroke 3.2 in (8.1 cm) tall. The open mouth above the crossbar (Rows 6–8) should be 1.2 in (3.0 cm) tall.

Row 9 (R), top bar: With R, ch 25. Sc in the 2nd ch from the hook, sk 2 ch, Fan in the next ch, sk 2 ch, sc in the next ch; rep from * 2 more times, sk 2 ch, Fan in the next ch, sk 2 ch. Then sc in the inner-edge dc of Row 8. Sk 2 dc, Fan in the next sc, sk 2 dc, sc in the next dc; rep from * once more, ending at the outer left edge. (37 sts: 24 on the chain plus 13 over the stroke) Fasten off.

Row 10 (C): Turn and work as for Row 2. (37 sts) Fasten off.

Checkpoint: 3.7 in (9.4 cm) x 4.0 in (10.2 cm).

Daisies (Make 3)

Rnd 1 (Y): Make a magic ring, work 6 sc in the ring, and join with a sl st to the first sc. (6 sc) Fasten off Y.

Rnd 2 (C): Join C in any sc. (Ch 2, 2 dc, ch 2, sl st) all in the same sc, then sl st into the next sc; rep from * 5 more times, working the last sl st into the first sc. (6 petals)* Fasten off and leave a 6 in (15.2 cm) tail.

Each daisy is about 0.9 in (2.3 cm) across.

Leaves (Make 6)

With G, ch 5. Working in the back bumps, sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, hdc in the last ch, then ch 1 for the tip. Rotate and work along the other side of the chain: hdc, dc, hdc, sc, then sl st into the first sc. (8 sts plus the ch-1 tip) Fasten off and leave a 6 in (15.2 cm) tail.

Each leaf is about 0.6 in (1.5 cm) long.

Edging

Edging gauge: Work 1 sc into each stitch or chain along the tops and bottoms of rows (10 sc per inch). Work 2 sc into each row end along the sides (5 sc per inch, since each row is 0.4 in or 1.0 cm tall).

The side counts below do not include corner extras. At each of the 8 outer (convex) corners, work 1 extra sc into the corner st. At the 4 inner (concave) corners, keep going with no extra sts.

Edging Rnd (R): Join R at the bottom-left corner. Work these sides in order, crocheting over the row tails as you go:

  1. Bottom edge (into the foundation ch): 37 sc
  2. Right outer side, Rows 1–5: 10 sc
  3. Crossbar top: 19 sc
  4. Crossbar inner end, Row 5: 2 sc
  5. Underside of the crossbar ch: 6 sc
  6. Inner side of the right stem, Rows 4–3: 4 sc
  7. Unworked sts of Row 2: 11 sc
  8. Inner side of the left stroke, Rows 3–8: 12 sc
  9. Underside of the top bar ch: 24 sc
  10. Right end of the top bar, Rows 9–10: 4 sc
  11. Top edge: 37 sc
  12. Left side, Rows 10–1: 20 sc

Join with a sl st to the first sc. (186 side sts + 8 corner extras = 194 sc)

Why the math works: The tops and bottoms get exactly one sc per existing stitch or chain. So the 37-stitch rows give 37 edging sts, and the 24-ch and 6-ch extensions give 24 and 6. Along the sides, 2 sc per row end match the row height, so the sides lie flat. The 8 corner extras turn the outer corners without cupping. Leaving the inner corners plain keeps the mouth of the G from ruffling.

Final Blocking

  1. Weave in any remaining tails on the wrong side.
  2. Spray the letter until it is evenly damp.
  3. Pin it to 3.9 in (9.9 cm) x 4.2 in (10.7 cm), keeping the strokes straight.
  4. Use the pins to ease the 4 outer corners of the G into gentle curves.
  5. Open each fan with your fingertip so the dc spread out evenly.
  6. Pin the daisies and leaves flat too, opening out each petal.
  7. Optional: brush on a thin coat of fabric stiffener for a firmer keychain.
  8. Let everything dry completely before unpinning.

Attaching Flowers and Hardware

Use the tails to sew 2 leaves behind each daisy so they peek out on opposite sides. Sew one daisy to the top-left corner, one to the middle of the left stroke at about Row 5, and one to the bottom-right corner. Use small stitches through the yellow center and the base of each petal.

Open a jump ring and pass it through the 7th edging sc of the top edge, counting from the top-left corner. Add the chain and close the ring. Use the second jump ring to join the chain to the key ring.

Final Quality-Control Checklist

  • Stitch counts are 37, 13, and 19 where stated
  • Stripes alternate R and C as written
  • The edging has 194 sc and lies flat
  • The finished size is 3.9 in (9.9 cm) x 4.2 in (10.7 cm), within 0.1 in (0.3 cm)
  • No tails show on the right side
  • All jump rings are fully closed
  • The daisies are secure and the petals are opened out

Troubleshooting

Fans are cupping: Your dc are too tight. Loosen them, or go up half a hook size.

Edges are wavy: There are too many sc along the row ends. Use exactly 2 per row.

The crossbar droops: Check that the ch-7 isn’t twisted, and pin the crossbar straight while blocking.

The letter leans: Your stripes are uneven. Pin the letter square while blocking.

The key ring pulls the edge: Attach the jump ring through 2 edging sc instead of 1.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat in shape. Don’t leave the metal hardware soaking for long.

Beige linen tote bag with burgundy-and-cream striped crocheted G pendant adorned with white daisies in minimalist home setting.

Final Notes

Here is the measurement chain to keep you on track. Rows 1–2 measure 3.7 in (9.4 cm) x 0.8 in (2.0 cm). The right stem with its crossbar reaches 2.0 in (5.1 cm), and the left stroke reaches 3.2 in (8.1 cm). After Row 10, the letter is 3.7 in (9.4 cm) x 4.0 in (10.2 cm). After the 194-stitch edging, it’s 3.9 in (9.9 cm) x 4.2 in (10.7 cm). If you hit each checkpoint, your G will finish true to size and ready to clip on.

Happy crocheting!

Leave a Comment