Bluefin Lattice Fish Bag Holder Crochet Pattern

This fish-shaped grocery bag holder keeps your plastic bags in one tidy spot. The body is an open V-stitch lattice tube, so the bags show through the diamond openings. You pull them out one at a time through a narrow ribbed cuff at the bottom. A solid single crochet head, two leaf fins, a bow-style tail and a round eye finish the fish.

The sample is light blue cotton. White is used for one accent round between the head and the lattice, and for the stripe down the center of every fin and tail lobe. A little black makes the pupil. Navy with the same white accents works just as well.

The pattern uses US terms. The body measures 13 in (33.0 cm) long and 7 in (17.8 cm) wide at its widest point, laid flat. With the tail it is about 16 in (40.6 cm) long. From the top of the hanging loops to the tail tips it is about 20.5 in (52.1 cm).

You work the body in one piece from the bottom up: ribbed cuff, lattice, white round, then the tapered head. All the other parts are made separately and sewn on.

Finished Size and Construction

  • Finished size: body 13 in × 7 in (33.0 cm × 17.8 cm) flat; about 16 in (40.6 cm) long with the tail
  • Skill level: Intermediate (post stitches, V-stitch lace, simple sewing)
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 11 (1 body, 2 fins, 2 tail lobes, 2 bow lobes, 1 center wrap, 1 eye, 2 strap loops)
  • Layout: one tubular body, with the appendages sewn onto the front and sides
  • Piece size (fin and tail lobe): 2 in × 4.25 in (5.1 cm × 10.8 cm)
  • Size before border: 1.5 in × 3.75 in (3.8 cm × 9.5 cm)
  • Border depth: one sc edging round, 0.25 in (0.6 cm) on each edge

Materials

Use a smooth worsted-weight cotton. It holds the lattice open, keeps its shape when the holder is full, and washes well. Avoid fuzzy or stretchy yarns, because they make the mesh sag.

  • Light blue (main color): 100 g (170 m)
  • White (accent): 10 g (17 m)
  • Black (pupil): 2 g (3 m)

These quantities include a margin of about 15% for swatching and sewing tails.

Tools: 4.0 mm (G-6) hook, tapestry needle, 4 stitch markers, scissors, rust-proof pins, measuring tape.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • FPdc / BPdc – front / back post double crochet
  • BLO – back loop only
  • sp – space
  • st(s) – stitch(es)

Special stitches:
– V1: (dc, ch 1, dc) in the same st or sp.
– V2: (dc, ch 2, dc) in the same st or sp.
– Beginning V1 / V2: ch 4 / ch 5 (counts as dc + ch 1 / ch 2), then dc in the same st or sp.

Gauge and Checkpoints

  • Single crochet: 16 sc × 18 rounds = 4 in (10.2 cm)
  • Double crochet: 16 dc × 8 rounds = 4 in (10.2 cm)
  • Lattice: one (V2, ch 2) repeat = 1.4 in (3.6 cm) wide; 5 mesh rounds = 3 in (7.6 cm) tall

Make one fin first. It uses every stitch height in the pattern, so it works as a quick gauge test. It should measure 2 in × 4.25 in (5.1 cm × 10.8 cm). If it is larger, go down 0.5 mm. If it is smaller, go up 0.5 mm.

Body checkpoints (measured flat):
– After the cuff: 2 in (5.1 cm) tall and 5 in (12.7 cm) around
– After Rnd 8: 7 in (17.8 cm) wide
– After Rnd 16: 9.2 in (23.4 cm) from the cuff edge
– After Rnd 17: 6.25 in (15.9 cm) wide
– After Rnd 33: 13 in (33.0 cm) long

If the lattice is too wide, go down one hook size for the mesh rounds only. If it is too narrow, pull each dc up a little taller. Never change the stitch counts.

Close-up of light blue crocheted bunny head with black safety eye and open lacy stitching.

Body

Work in joined rounds with the right side facing, and do not turn. In the cuff, the beginning ch-2 does not count as a stitch.

Cuff

With light blue, ch 20 and join with a sl st to form a ring, taking care not to twist it.

Rnd 1: Ch 2, dc in each ch around, join. (20 dc)

Rnds 2–4: Ch 2, FPdc around the next st, BPdc around the next st; repeat from * 9 more times, join. (20 sts: 10 FPdc, 10 BPdc)

The ribbed cuff measures 2 in (5.1 cm) tall and 5 in (12.7 cm) around.

Lattice

Rnd 5: Beginning V1 in the first st, ch 1, skip the next st. V1 in the next st, ch 1, skip the next st; repeat from * 8 more times. Join to the 3rd ch of the beginning ch-4. (10 V1, 10 ch-1 sps) Each repeat uses 2 cuff sts, and 10 × 2 = 20.

Rnd 6: Sl st into the next dc and the following ch-1 sp. Beginning V1 in this sp, ch 1. V1 in the next ch-sp between Vs, ch 1; repeat from * 8 more times, join. (10 V1, 10 ch-1 sps)

Always skip the center sp of each V and work into the spaces between Vs. This offsets each round by half a repeat and creates the diamonds.

Rnd 7: Sl st to the next between-V sp. Beginning V1, ch 2. V1 in the next between-V sp, ch 2; repeat from * 8 more times, join. (10 V1, 10 ch-2 sps) Width: 6.25 in (15.9 cm).

Rnd 8: Sl st to the next between-V sp. Beginning V2, ch 2. V2 in the next ch-2 sp, ch 2; repeat from * 8 more times, join. (10 V2, 10 ch-2 sps) Width: 7 in (17.8 cm).

Rnds 9–15: Repeat Rnd 8. (10 V2, 10 ch-2 sps)

Rnd 16: Work as for Rnd 7, placing each V1 in a ch-2 sp. (10 V1, 10 ch-2 sps) Fasten off.

The lattice is 12 rounds tall: 12 × 0.6 in = 7.2 in (18.3 cm).

White Transition Round

Rnd 17 (conversion round): Join white in any dc and ch 1. Work 1 sc in each dc, 1 sc in each ch-1 V-center sp and 2 sc in each ch-2 sp, then join.

Count: 20 sc worked into the dc + 30 sc worked into the spaces (10 × 1 + 10 × 2) = 50 sc.

Every chain gets one sc, so the round lies flat. At 16 sc per 4 in, 50 sc = 6.25 in (15.9 cm) flat, which matches Rnd 16. Fasten off white.

Head

Change to light blue. Start each round with ch 1 and join at the end.

Rnds 18–19: Sc around. (50 sc)

Rnd 20: Sc 8, sc2tog; repeat 5 times. (45 sc)

Rnd 22: Sc 7, sc2tog; repeat 5 times. (40 sc)

Rnd 24: Sc 6, sc2tog; repeat 5 times. (35 sc)

Rnd 26: Sc 5, sc2tog; repeat 5 times. (30 sc)

Rnd 28: Sc 4, sc2tog; repeat 5 times. (25 sc)

Rnd 30: Sc 3, sc2tog; repeat 5 times. (20 sc)

Rnds 21, 23, 25, 27, 29: Sc around. The count stays the same as the round before.

Rnds 31–33: Sc around. (20 sc)

Fasten off. Counting the white round, the head is 17 sc rounds: 17 × (4 ÷ 18) ≈ 3.8 in (9.7 cm). You load the bags through the 5 in (12.7 cm) top opening.

Fins, Tail Lobes and Bow Lobes

Each of these is a leaf worked around a white foundation chain. The white round becomes the center stripe.

Fins and Tail Lobes (make 4: 2 fins, 2 tail lobes)

Rnd 1: With white, ch 15. Sc in the 2nd ch from the hook and in the next 12 ch (13 sc), then 3 sc in the last ch. Working along the opposite side, sc in the next 12 ch, then 2 sc in the ch that holds the first sc. Join. (30 sc) Fasten off.

Stitch map: base = sts 29, 30 and 1; side A = sts 2–13 (12); tip = sts 14–16 (3); side B = sts 17–28 (12).

Rnd 2 (BLO): Join light blue in st 1, ch 1 and sc in the same st. Then work:
– Side A: sc 2, hdc 3, dc 4, hdc 2, sc 1 (12)
– Tip: sc 1, (sc, ch 2, sc) in the center st, sc 1 (4 sc + ch-2 sp)
– Side B: sc 1, hdc 2, dc 4, hdc 3, sc 2 (12)
– Base: sc 2

Join. (31 sts + ch-2 tip sp)

The tall stitches in the middle of each side give a leaf shape with a narrow base and a sharp tip. Working in BLO frames the white stripe. The piece now measures 1.5 in × 3.75 in (3.8 cm × 9.5 cm).

Bow Lobes (make 2)

Rnd 1: Work as for the fin, but start with ch 10: 8 sc, 3 sc in the last ch, 7 sc, 2 sc. (20 sc)

Rnd 2 (BLO): Sc in st 1. Side A: sc 1, hdc 2, dc 2, hdc 1, sc 1 (7). Tip: sc 1, (sc, ch 2, sc), sc 1. Side B: sc 1, hdc 1, dc 2, hdc 2, sc 1 (7). Base: sc 2. (21 sts + ch-2 tip sp)

Small Pieces

Center wrap (light blue): Ch 5. Row 1: Sc in the 2nd ch from the hook and in each ch across. (4 sc) Rows 2–8: Ch 1, turn, sc across. (4 sc) It measures 1 in × 1.75 in (2.5 cm × 4.4 cm).

Eye: With black, work 6 sc in a magic ring and join. (6 sc) Change to white. Rnd 2: 2 sc in each st. (12 sc) Rnd 3: Sl st in each st to make the rim. (12 sl st) The eye is 1 in (2.5 cm) across.

Strap loops (make 2, light blue): Ch 44 and join into a ring without twisting. Rnd 1: Sc in each ch. (44 sc) Flattened, each loop is 5.5 in (14.0 cm) long.

Make All Pieces

  • Light blue: body (with one white round), center wrap, 2 strap loops
  • White + light blue: 2 fins, 2 tail lobes, 2 bow lobes
  • Black + white: 1 eye

Layout (front view, laid flat):

          [loop]  [loop]
         [  HEAD + eye  ]
         [==white round==]
  [fin]  [   LATTICE    ]  [fin]
       [bow]  [wrap]  [bow]
           [   CUFF   ]
     [tail lobe]  [tail lobe]

Joining (Assembly)

Lay the body flat with the cuff at the bottom and the round seam along one side fold. Sew everything with light blue yarn and a whipstitch, making 1 sewing stitch per edge stitch.

  1. Fins: Sew the 3 base sts of each fin to a side fold at Rnds 15–16, with the tip pointing down and out.
  2. Tail: Overlap the 2 tail lobe bases at the center front of the cuff, with the tips angled down in a V. Lay the 2 bow lobe bases on top, with the tips angled up and out.
  3. Center wrap: Wrap it around all 4 bases and sew its short ends together at the back. Then sew the wrap to the front of the cuff only, leaving the opening free. The tail lobes should hang about 3 in (7.6 cm) below the cuff.
  4. Eye: Sew it on at Rnds 26–28, 1.5 in (3.8 cm) in from the side fold.
  5. Straps: Tuck 1 in (2.5 cm) of one loop inside the top edge at center front and the other at center back. Sew each one through the last 2 rounds. About 4.5 in (11.4 cm) of each loop should stand above the head.

Use medium tension. If your stitches are tight, the lattice will pucker. If they are loose, the fins will flop. Checkpoint: the body is still 13 in (33.0 cm) long, and about 16 in (40.6 cm) with the tail.

Border

Each leaf piece gets an edging round (Rnd 3) at the sc gauge of 16 sts = 4 in (10.2 cm). It adds 0.25 in (0.6 cm) on each edge. With light blue, ch 1 and work through both loops.

Fins and tail lobes:
– Base: 1 sc in each of the 3 base sts (3)
– Side A: 1 sc in each st (12)
– Tip: sc 2, 3 sc in the ch-2 sp, sc 2 (7)
– Side B: 1 sc in each st (12)

Total: 3 + 12 + 7 + 12 = 34 sc. That is 31 sts worked 1 per stitch + 3 sc in the tip sp. The finished piece is 2 in × 4.25 in (5.1 cm × 10.8 cm).

Bow lobes: base 3, side A 7, tip 7 (sc 2, 3 sc in the sp, sc 2), side B 7. Total: 24 sc (21 + 3). The finished piece is 1.5 in × 3 in (3.8 cm × 7.6 cm).

Why the math works: Each side gets exactly 1 sc per stitch, so it neither ruffles nor cups. The only added stitches go at the tip, where the edge turns sharply. The base has no increases, so it stays narrow for sewing.

Final Blocking

  1. Fill the body loosely with a rolled towel.
  2. Mist the lattice, fins and tail until damp.
  3. Ease each diamond open and even out the V-stitches.
  4. Pin the fin and tail tips into sharp points.
  5. Check that Rnds 8–15 are 7 in (17.8 cm) wide and the body is 13 in (33.0 cm) long.
  6. Let it dry completely before you remove the towel.

Final Quality-Control Checklist

  • Cuff: 20 sts, with clean ribs
  • Every lattice round: 10 Vs, offset into diamonds
  • White round: 50 sc, lying flat
  • Head: ends with 20 sc
  • Edging counts: 34 sc on fins and tail lobes, 24 sc on bow lobes
  • Tail sewn to the front of the cuff only, with the opening clear
  • Strap loops secure and even in height
  • All ends woven in

Troubleshooting

  • The diamonds stack in columns: You worked V into V. Work into the spaces between the Vs instead.
  • The white round ripples: There are too many sc in the spaces. Recount it as 20 + 30.
  • The head leans to one side: Shift the decreases by 1 st on every other decrease round.
  • The fin tips are rounded: Use a ch-2 at the tip, not a ch-1, and work 3 sc into it.
  • Bags slip out too easily: Go down one hook size for the cuff.

Care

Hand wash, or machine wash on a cool, gentle cycle. Reshape the holder while damp and lay it flat to dry.

Light blue crocheted fish with open mesh belly hanging on a white door with brass knob.

Final Notes

Here is how the measurements build on each other. The 20-st cuff is 5 in (12.7 cm) around. The 10-repeat lattice widens to 7 in (17.8 cm) and is 7.2 in (18.3 cm) tall. The 50-sc white round brings the width back to 6.25 in (15.9 cm). The head then tapers to 20 sc over 3.8 in (9.7 cm), giving a 13 in (33.0 cm) body. If your first fin matches the gauge, every later checkpoint should come out right.

Happy crocheting!

Leave a Comment