This organizer has three soft, rounded pockets stacked on two cream straps and hung from a wooden dowel. Each pocket is a little half-bowl with a flat back. A lavender corded trim finishes the opening, and three embroidered lavender sprigs decorate the front.
The palette is calm and fresh: a cream base, lavender for the trim and buds, and sage green for the stems and leaves. Firm single crochet in cotton gives the pockets enough body to hold brushes, perfume bottles and makeup without sagging.
The pattern uses US crochet terms. Each pocket measures 8 in (20.3 cm) wide, 4.4 in (11.2 cm) tall and about 4 in (10.2 cm) deep. The finished organizer hangs about 29 in (73.7 cm) from the top of the cord to the bottom pocket.
Here is how it goes together. You work a flat half-circle back and a cupped half-circle front in turned rows, then join them with single crochet. Next you add a two-round trim and the embroidery. Finally, you sew the pockets onto two straps that fold over a dowel, and tie on a crocheted cord to hang it.
Finished Size and Construction
- Pocket size: 8 in (20.3 cm) wide × 4.4 in (11.2 cm) tall × 4 in (10.2 cm) deep
- Overall size: 11 in (27.9 cm) wide at the dowel × about 29 in (73.7 cm) tall
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 9 crocheted pieces (3 backs, 3 fronts, 2 straps, 1 cord) plus a dowel
- Layout: 3 pockets stacked in 1 column
- Back panel size: 8 in (20.3 cm) wide × 4 in (10.2 cm) tall
- Pocket size before border: 8 in (20.3 cm) × 4 in (10.2 cm)
- Border depth: 0.4 in (1.0 cm)
Materials
Use a smooth worsted-weight 100% cotton or cotton blend. Cotton keeps its shape and shows embroidery clearly. Avoid acrylic, because it relaxes and the pockets will droop.
- Cream: 150 g / 240 m
- Lavender: 20 g / 32 m
- Sage green: 10 g / 16 m
These quantities include a margin of about 15–20% for swatching and embroidery.
Tools:
– 4.0 mm (G-6) crochet hook
– Wooden dowel, 11 in (27.9 cm) long, 3/8 in (1.0 cm) diameter
– Tapestry needle
– Stitch markers (at least 4)
– Pins and a tape measure
– Blocking mat and spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- inc – 2 sc in the same stitch
- sk – skip
- st(s) – stitch(es)
- rev sc – reverse single crochet (crab stitch)
- RS / WS – right side / wrong side
Reverse single crochet: Working from left to right (right-handers), insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over and draw through both loops. This makes the raised, corded lavender edge.
Gauge and Checkpoints
Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc worked in rows. That works out to 4 sc and 4.5 rows per inch.
Make one back panel first. It is your gauge swatch.
- Back, Row 9: the straight edge measures 4 in (10.2 cm) across.
- Back, Row 18: the straight edge measures 8 in (20.3 cm), and the height is 4 in (10.2 cm).
- Front, Row 28: the straight edge (the rim) measures about 12.4 in (31.5 cm) when relaxed.
- Strap, 100 rows: 22.2 in (56.4 cm).
If your piece is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Don’t change the stitch counts. The front and back only fit together if both last rows have 54 sts.

Back Panel (Make 3, Cream)
The back is a flat half-circle worked in turned rows. Ch 1 at the start of each row does not count as a stitch.
Row 1: Ch 2, 3 sc in 2nd ch from hook. Turn. (3)
Row 2: Ch 1, inc in each st. Turn. (6)
Row 3: Ch 1, (sc, inc) 3 times. Turn. (9)
Row 4: Ch 1, (sc in next 2, inc) 3 times. Turn. (12)
Rows 5–18: Ch 1, (sc in next X, inc) 3 times, where X goes up by 1 each row. Turn. Each row has 3 more sts than the last.
Counts: Row 5 (15), Row 6 (18), Row 7 (21), Row 8 (24), Row 9 (27), Row 10 (30), Row 11 (33), Row 12 (36), Row 13 (39), Row 14 (42), Row 15 (45), Row 16 (48), Row 17 (51), Row 18 (54).
Stagger the increases on alternate rows (put the inc at the start of the repeat instead of the end) so the curve stays round. Fasten off. The straight edge has 18 row ends on each side, 36 in total.
Pocket Front (Make 3, Cream)
The front starts at the center of the rim. Its increases slow down row by row, which makes the piece cup into a quarter-dome.
Rows 1–9: Work exactly as Rows 1–9 of the back panel. (27)
Row 10: Ch 1, sc in next 13, inc, sc in next 12, inc. Turn. (29)
Rows 11–21: Ch 1, sc across, working 2 inc evenly spaced. Move the inc positions on each row. Turn.
Counts: Row 11 (31), Row 12 (33), Row 13 (35), Row 14 (37), Row 15 (39), Row 16 (41), Row 17 (43), Row 18 (45), Row 19 (47), Row 20 (49), Row 21 (51).
Rows 22–24: Ch 1, sc across, working 1 inc near the center. Turn.
Counts: Row 22 (52), Row 23 (53), Row 24 (54).
Rows 25–28: Ch 1, sc in each st. Turn. (54)
Fasten off and leave a 12 in (30.5 cm) tail. The piece should now curve into a shallow cup. The straight edge has 28 row ends on each side, 56 in total, and it becomes the front rim.
Embroidery (Each Front)
Do the embroidery before joining so you can reach the back of the work. Lay the front RS up with the rim at the top. Mark the center, about 1 in (2.5 cm) below the rim.
- Stems (sage): Using backstitch, sew a center stem 2.25 in (5.7 cm) long, running straight down. Add two side stems 2 in (5.1 cm) long that angle outward and meet the center stem at its base.
- Leaves (sage): Work 2 lazy daisy stitches at the base of each stem, angled outward, each about 0.5 in (1.3 cm) long.
- Buds (lavender): On each stem, work pairs of lazy daisy stitches angled up and out in a V, stacked from the top of the stem downward. Use 5 pairs on the center stem and 4 pairs on each side stem. Wrap each loop twice so the buds stand up in raised ovals.
- Weave all tails in on the WS.
Make All Pieces
- Cream: 3 backs, 3 fronts, 2 straps, 1 cord
- Lavender: 3 trims plus the buds
- Sage: stems and leaves on 3 fronts
Straps (make 2, cream): Ch 6. Row 1: sc in 2nd ch from hook and in each ch across. Turn. (5) Rows 2–100: ch 1, sc in each st. Turn. (5) Fasten off. Each strap measures 1.25 in (3.2 cm) × 22.2 in (56.4 cm).
Cord (cream): Ch 95, then sl st in the back bump of each ch. It should measure 24 in (61.0 cm). Add or remove chains to match that length.
Layout grid (front view):
/\ cord
========== dowel
| | straps (rows 89–100 fold)
[Pocket 1] rim at strap row 70
| |
[Pocket 2] rim at strap row 45
| |
[Pocket 3] rim at strap row 20
Joining
Part A – Front to back (do this now): Hold one front and one back with WS together, the curved edges matching and the straight edges at the top. The front’s Row 28 (54 sts) and the back’s Row 18 (54 sts) line up one to one. Join cream at one top corner and work sc through both layers in each st across the curve. (54)
That is one seam stitch per pair, with nothing added and nothing skipped. Keep your tension even and firm. A tight seam pulls the curve flat, and a loose seam gapes. Fasten off.
Checkpoint: The back stays flat, the front cups forward, and the opening is a D-shape with its straight side 8 in (20.3 cm) across.
Part B – Pockets to straps (do after the border): Mark strap rows 20, 45 and 70, counted from the bottom. Lay the straps 8 in (20.3 cm) apart at their outer edges. Pin each pocket so the top of its trim sits on a marked row and its back corners cover the straps.
Whipstitch each corner’s trim across the 5 strap sts. Then tack the back panel to the strap for 1 in (2.5 cm) down the strap’s inner edge. Rim to rim, the spacing is 25 rows, or 5.6 in (14.2 cm).
Border (Pocket Trim)
Border gauge: 4 sc per inch, the same as the body. You work the trim around the whole opening, along the front rim and then the back’s straight edge.
Round 1 (cream): Join at the right-hand seam corner, RS facing.
- Front rim (56 row ends): (sc in next 8 row ends, sk 1) 6 times, then sc in the last 2 row ends. That gives 50 sc from 54 + 2 row ends.
- Back edge (36 row ends): (sc in next 8 row ends, sk 1) 4 times. That gives 32 sc.
Sl st to the first sc. Total: 50 + 32 = 82 sts.
Round 2 (lavender): Join lavender. Ch 1, rev sc in each st around. (82) Sl st to join and fasten off.
Why the math works: The front rim is half of a circle with a 4 in (10.2 cm) radius, which is about 12.5 in (31.8 cm) long. At 4 sc per inch, that is 50 sts. The back edge is 8 in (20.3 cm), which is 32 sts at the same gauge. Skipping 1 row end in every 9 converts the row gauge of 4.5 per inch to the stitch gauge of 4 per inch, so the trim lies flat without ruffling or pulling in.
Mounting the straps: Thread the dowel through the straps. Fold the top 12 rows of each strap, rows 89–100 (2.7 in / 6.9 cm), to the back over the dowel. Whipstitch Row 100 to Row 77. Then tie each end of the cord about 0.5 in (1.3 cm) in from each end of the dowel, using a double knot. Weave in the tails.
Final Blocking
- Before mounting, mist each pocket until it is damp but not wet.
- Stuff each pocket firmly with a rolled towel to round out the front cup.
- Pin the back flat and check that it measures 8 in (20.3 cm) across.
- Ease the lavender trim into a smooth arc without stretching it.
- Mist the straps, pin them to 1.25 in × 22.2 in (3.2 cm × 56.4 cm), and let them dry.
- Let everything dry completely before assembly, which takes about 24 hours.
Final Quality-Control Checklist
- [ ] The last row of each back and each front has 54 sts.
- [ ] The seam has 54 sc with no gaps.
- [ ] The trim has 82 sts: 50 on the rim and 32 on the back.
- [ ] Each pocket is 8 in (20.3 cm) wide and 4.4 in (11.2 cm) tall.
- [ ] The embroidery is centered and all tails are secured.
- [ ] The straps each have 100 rows and measure 22.2 in (56.4 cm).
- [ ] The pocket rims sit at strap rows 20, 45 and 70.
- [ ] The dowel is level and the cord is tied securely at both ends.
Troubleshooting
- The back panel ruffles: You have extra stitches or loose tension. Recount, or go down a hook size.
- The back panel cups: Your tension is too tight. Go up a hook size.
- The front stays flat: Check that you switched to 2 inc per row at Row 10.
- The seam won’t line up: Recount both last rows. They must each have 54.
- The trim flares: Skip 1 row end in every 7 instead of every 9 on Round 1, and keep the total at 82 or close to it.
- The pocket tilts forward: Tack the back panel further down the strap.
Care
Hand wash in cool water, roll the pieces in a towel and dry them flat. Take the dowel out before washing.

Final Notes
Everything in this pattern depends on gauge. At 4 sc and 4.5 rows per inch, 18 rows of the back give an 8 in (20.3 cm) panel with 54 sts, which matches the front’s 54 sts. The 82-stitch trim fits the 12.5 in (31.8 cm) rim and the 8 in (20.3 cm) back edge, and the 100-row straps space the pockets 5.6 in (14.2 cm) apart below the dowel. If you check each measurement as you go, the pieces will fit together.
Happy crocheting!