The Cinnamon Fan Tree is a small, flat Christmas ornament made from stacked shell stitches. Three fans make the bottom tier, two make the middle tier and one sits on top. Together they form a soft, scalloped triangle, and a solid brown trunk sits centered underneath.
The tree is worked in a warm rust shade that looks great on a real tree, on a gift tag or tied to a wreath. The trunk is a contrasting brown. The fans are dense, so the ornament keeps its shape. The small open diamonds between the tiers give it a light, lacy look.
This pattern uses US crochet terms. The finished ornament measures about 4 in (10.2 cm) wide and 4.2 in (10.7 cm) tall, not counting the hanging loop. The loop adds about 2 in (5.1 cm).
Construction overview: You start with a chain-loop foundation row and work the tiers upward in rows: 3 fans, then 2, then 1. The hanging loop is chained from the center of the top fan. Next you work a single crochet edging across the underside of the foundation chain. Finally you work the trunk straight down from the center of that edging. There is no sewing and only one finished piece.
Finished Size and Construction
- Finished size: 4 in (10.2 cm) wide × 4.2 in (10.7 cm) tall, plus a 2 in (5.1 cm) hanging loop
- Skill level: Easy
- Terminology: US crochet terms
- Yarn weight: DK (light worsted / #3), cotton or cotton blend
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 (the trunk is worked directly onto the base edging)
- Layout: Fans in 3 tiers of 3–2–1, trunk centered below
- Piece size: Tree body 4 in (10.2 cm) wide × 3 in (7.6 cm) tall; trunk 1.2 in (3.0 cm) wide × 1.2 in (3.0 cm) tall
- Size before border: 4 in (10.2 cm) wide × 2.75 in (7.0 cm) tall
- Border depth: One row of single crochet along the base, about 0.25 in (0.6 cm)
Materials
Yarn: Choose a smooth DK cotton or cotton blend with good stitch definition, roughly 115 m per 50 g. Cotton shows the fan ribs clearly and blocks flat. Avoid fuzzy or very splitty yarns, because they blur the shells and the diamond openings.
- Color A, Rust/Terracotta (tree and hanging loop): 8 g, about 18 m
- Color B, Medium Brown (trunk): 3 g, about 7 m
These quantities include a margin for your gauge swatch and weaving in ends. Leftover yarn is perfect for this project.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– Stitch markers (2)
– Ruler or tape measure
– Blocking mat and rust-proof pins
– Spray bottle with water
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- st(s): stitch(es)
- sp: space
- RS: right side
- rep: repeat
Special stitch – Fan: Work 9 dc into the same ch-5 space. A fan has 9 dc, and the center dc is always the 5th dc. The next tier is anchored to that center stitch.
Gauge and Checkpoints
Gauge: 20 sc and 24 rows = 4 in (10.2 cm), which is 5 sc and 6 rows per 1 in (2.5 cm). One finished fan measures about 1.4 in (3.6 cm) wide and 0.75 in (1.9 cm) tall.
The ornament is small, so the best gauge swatch is the ornament itself. Work the foundation row and the first tier of fans, then measure before going on.
Checkpoints:
– After Row 1: The chain-loop row measures about 3.5 in (8.9 cm) long, slightly relaxed.
– After Row 2: The bottom tier is 4 in (10.2 cm) wide and 0.75 in (1.9 cm) tall.
– After Row 4: The middle tier is about 2.75 in (7.0 cm) wide. The total height is 1.75 in (4.4 cm).
– After Row 6: The top fan is about 1.4 in (3.6 cm) wide. The total height is 2.75 in (7.0 cm).
– After the border: The body is 3 in (7.6 cm) tall.
– After the trunk: The trunk is 1.2 in (3.0 cm) wide and 1.2 in (3.0 cm) tall, and the total height is 4.2 in (10.7 cm).
If your piece is too big, go down to a 3.25 mm (D-3) hook. If it is too small or the fans look crowded, go up to a 3.75 mm (F-5) hook. If the fans ruffle, your ch-5 loops are too tight. Chain a little more loosely rather than changing the stitch count.

Pattern
Row 1 – Chain-Loop Foundation
With Color A, ch 17.
Row 1 (RS): Sc in the 2nd ch from the hook. *Ch 5, skip the next 4 ch, sc in the next ch. Rep from * 2 more times.
Count: 4 sc and 3 ch-5 spaces.
Check the chain math: 1 turning ch + 1 sc + 3 × (4 skipped ch + 1 sc) = 17 ch. The middle loop sits over the 6 center foundation chains. Later, the trunk will hang below those same 6 chains.
Row 2 – Bottom Tier (3 Fans)
Row 2: Ch 1, turn. Sc in the first sc. *Work 1 Fan (9 dc) in the next ch-5 sp, sc in the next sc. Rep from * 2 more times.
Count: 31 sts (27 dc and 4 sc), which makes 3 fans.
Each fan should open into a smooth half-circle, with the sc between fans pulled down into a point. Checkpoint: 4 in (10.2 cm) wide.
Row 3 – Middle-Tier Loops
Row 3: Turn. Sl st in the first 5 sts (1 sc and 4 dc). Ch 1, sc in the next dc, which is the center (5th) dc of fan 1. Ch 5, sc in the center (5th) dc of fan 2. Ch 5, sc in the center (5th) dc of fan 3. Leave the remaining 4 dc and 1 sc unworked.
Count: 3 sc and 2 ch-5 spaces.
Each ch-5 loop arches over the sc junction between two bottom fans. The gap under each arch becomes the diamond-shaped opening between the tiers.
Row 4 – Middle Tier (2 Fans)
Row 4: Ch 1, turn. Sc in the first sc. Work 1 Fan in the next ch-5 sp, sc in the next sc. Work 1 Fan in the next ch-5 sp, sc in the last sc.
Count: 21 sts (18 dc and 3 sc), which makes 2 fans.
Checkpoint: The middle tier is about 2.75 in (7.0 cm) wide, and the total height is 1.75 in (4.4 cm).
Row 5 – Top-Tier Loop
Row 5: Turn. Sl st in the first 5 sts (1 sc and 4 dc). Ch 1, sc in the next dc (the center dc of fan 1). Ch 5, sc in the center (5th) dc of fan 2. Leave the remaining sts unworked.
Count: 2 sc and 1 ch-5 space.
Row 6 – Top Fan
Row 6: Ch 1, turn. Sc in the first sc, work 1 Fan in the ch-5 sp, sc in the last sc.
Count: 11 sts (9 dc and 2 sc), which makes 1 fan.
Checkpoint: The top fan is about 1.4 in (3.6 cm) wide, and the total height is 2.75 in (7.0 cm).
Row 7 – Hanging Loop
Row 7: Turn. Sl st in the first 5 sts (1 sc and 4 dc), then sl st in the next dc (the center dc). Ch 25, then sl st again into the same center dc. Fasten off and weave in the end through the back of the fan.
The 25-ch loop folds to about 2 in (5.1 cm). For a longer loop, add chains in multiples of 5. Every 5 extra chains adds about 0.4 in (1.0 cm) to the loop’s height.
Border
The border is a single row of sc worked into the free loops on the underside of the foundation chain. It firms up the straight base of the tree and gives you a clean edge for attaching the trunk.
Border gauge: 5 sc per 1 in (2.5 cm), the same as your main gauge.
Border Row: With RS facing, turn the tree upside down. Join Color A in the free loop of the very first foundation chain (at the slip-knot end). Ch 1, then sc in the same ch and in each of the next 15 ch. Do not work into the turning ch at the far end. Fasten off.
Count: 16 sc, split into 3 sections:
– Section 1: 5 sc (under the first outer loop and its anchoring sc)
– Section 2: 6 sc (under the middle loop)
– Section 3: 5 sc (under the last outer loop and its anchoring sc)
Place a marker in the 6th sc and the 11th sc. These mark the 6 center stitches.
Why the math works: The foundation was 17 ch, and the first one was only a turning ch. That leaves 16 usable chains, which gives exactly 16 sc. The 4 sc of Row 1 were worked into chains 2, 7, 12 and 17, counted from the hook. That means chains 7–12 sit directly under the middle loop. Those are exactly border stitches 6–11, with 5 stitches on each side, so the trunk will be perfectly centered.
Trunk
Row 1: With RS facing, join Color B in the marked 6th border sc. Ch 1, then sc in the same st and in each of the next 5 sts, ending in the 11th sc. (6 sc)
Rows 2–7: Ch 1, turn, sc in each sc across. (6 sc)
Fasten off and weave in the ends.
Checkpoint: The trunk is 6 sc wide at 5 sc per inch, so it measures 1.2 in (3.0 cm). It is 7 rows tall at 6 rows per inch, about 1.2 in (3.0 cm). The total ornament height is now 4.2 in (10.7 cm).
Final Blocking
- Weave in any remaining ends along stitches of the same color.
- Lightly spray the ornament until it is evenly damp, but not soaked.
- Lay it RS up on the blocking mat.
- Pin the base straight across at 4 in (10.2 cm) wide. Keep the trunk centered and squared off.
- Shape each fan into a smooth half-circle by easing the dc outward with your fingers.
- Open each diamond gap so it is the same size as the others.
- Pin the peak so the tree measures 3 in (7.6 cm) from the base to the top of the fan.
- Straighten the hanging loop and pin it flat.
- Let it dry completely, at least 6 hours, before you unpin it.
Final Quality-Control Checklist
- Stitch counts are 31 sts in Row 2, 21 sts in Row 4 and 11 sts in Row 6.
- Each fan has exactly 9 dc.
- There are 3–2–1 fans, and each upper fan sits over a junction in the tier below.
- There are 3 matching diamond openings between the tiers.
- The border has 16 sc, and the trunk is centered over stitches 6–11.
- The trunk is 6 sc × 7 rows, square, and does not flare.
- The tree is 4 in (10.2 cm) wide and 4.2 in (10.7 cm) tall, plus a 2 in (5.1 cm) loop.
- All ends are hidden and nothing pokes through on the RS.
Troubleshooting
The fans ruffle or cup. The ch-5 loops are too short for 9 dc. Chain more loosely, or go up a hook size for the chain rows only.
The fans look gappy or flat. The ch-5 loops are too loose. Tighten your chains or go down a hook size.
The upper tier sits off-center. You probably slipped into too many or too few stitches at the start of Row 3 or Row 5. You should slip exactly 5 sts and then sc into the 5th dc.
The diamonds close up. The sc anchors in Rows 3 and 5 went into the wrong dc. Make sure each anchor is in the 5th (center) dc of its fan.
The trunk leans to one side. It was joined in the wrong border stitch. Count again: it should start in sc 6 and end in sc 11.
The base curls. The border was worked too tightly. Redo it with a larger hook.
Care
Hand wash in cool water, press out the excess water in a towel, and dry it flat in shape. Re-block lightly if the fans lose their curve.

Final Notes
The measurements build on each other:
– Row 1: 17 chains make 3 loops, about 3.5 in (8.9 cm) long.
– Row 2: 3 fans of 9 dc each make the 4 in (10.2 cm) base.
– Middle tier: 2 fans bring the height to 1.75 in (4.4 cm).
– Top fan: brings the height to 2.75 in (7.0 cm).
– Border: 16 sc bring the body to 3 in (7.6 cm).
– Trunk: 6 sc wide and 7 rows tall, so the finished ornament is 4.2 in (10.7 cm) tall.
If you check your gauge at each of these steps, the tree will come out the right size and shape. Make one for the tree, a few for gift wrapping, and keep the leftovers for next year.
Happy crocheting!