Cinnamon Wheel Coaster Set Crochet Pattern

The Cinnamon Wheel Coaster Set combines soft taupe openwork with a creamy picot edge. Each coaster has eight petal-shaped spokes that radiate from a small center ring to a sturdy outer ring. A cream border with round picot bumps frames the wheel.

The matching holder repeats the motif in miniature. Six small wheels form an openwork wall around a solid base, and a cream rim and a U-shaped front opening make it easy to lift a coaster out. The style is cozy and slightly vintage, a good fit for a coffee table or a holiday gift.

This pattern uses US crochet terms. Each finished coaster measures 4.5 in (11.4 cm) across. The holder measures about 5.25 in (13.3 cm) wide and 2.75 in (7.0 cm) tall.

Each coaster is worked in the round from a magic ring and gets a two-round cream border. For the holder you make a flat base and six mini wheels joined as you go. You then straighten the strip of wheels with fill rows and attach it to the base with a cream single crochet round.

Finished Size and Construction

  • Coaster size: 4.5 in (11.4 cm) diameter
  • Coaster before border: 3.75 in (9.5 cm)
  • Border depth: 3/8 in (1.0 cm) per side
  • Holder: 5.25 in (13.3 cm) wide x 2.75 in (7.0 cm) tall; inner base 5 in (12.7 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: DK (3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 6 coasters (separate, never joined); holder = 1 base + 6 mini wheels
  • Holder layout: 6 wheels in a row, plus a front opening
  • Mini wheel size: 2.25 in (5.7 cm)

Materials

Use a smooth, mercerized or matte DK cotton. Cotton absorbs moisture, takes heat well and keeps the picots crisp. Avoid acrylic, which can soften near hot mugs.

  • Color A, Taupe: 100 g / 230 m
  • Color B, Cream: 40 g / 92 m
  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • 4 stitch markers
  • Blocking mat and rust-proof pins
  • Spray bottle

These quantities include a margin of about 15% for gauge swatches and tension differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • dtr – double treble crochet
  • trtr – triple treble crochet (yo 4 times, insert, pull up a loop, [yo, pull through 2] 5 times)
  • st(s) – stitch(es)
  • sp – space
  • RS – right side

Special stitches

Spoke cluster (sp-cl): Yo 4 times, insert hook in the indicated st, pull up a loop, (yo, pull through 2) 4 times. Repeat from * to * once more in the same st (3 loops on hook). Yo and pull through all 3 loops. Because the two trtr share a base and a top, they bow apart in the middle and form a lens-shaped petal.

Beginning spoke cluster (beg sp-cl): Ch 5, then work from * to * once in the same st (2 loops on hook). Yo and pull through both loops.

Picot: Ch 3, sl st in the 3rd ch from hook.

Gauge and Checkpoints

Gauge: 13 sc = 2 in (5.1 cm) with a 3.5 mm hook, which is 6.5 sc per inch.

Make one complete coaster before you start the set and measure it at each stage:

  • After Round 1: 0.75 in (1.9 cm)
  • After Round 2, spoke tip to spoke tip: 3.25 in (8.3 cm)
  • After Round 3: 3.5 in (8.9 cm)
  • After Round 4: 3.75 in (9.5 cm)
  • After the border: 4.5 in (11.4 cm)

If it is too big (more than 1/8 in / 0.3 cm off), go down half a hook size. If it is too small, go up half a hook size. If the spokes cup upward, your ch-7 spaces are too tight, so loosen your chains. If the outer ring ruffles, the chains are too loose.

The holder depends on this gauge. The 5 in (12.7 cm) base is sized to fit a 4.5 in (11.4 cm) coaster with 1/4 in (0.6 cm) of clearance on each side.

Tan crocheted doily with intricate rope-like stitching and cream popcorn-stitch border on warm brown wood.

Coaster (Make 6)

Use Color A.

Round 1: Make a magic ring. Ch 1, then work 16 sc in the ring. Sl st to the first sc. Pull the ring snug, leaving a small open center. (16 sc)

Round 2 (spokes): Beg sp-cl in the same st, ch 7, skip next st. Sp-cl in next st, ch 7, skip next st. Repeat from * to * 6 more times. Sl st to the top of the beg sp-cl. (8 sp-cl and 8 ch-7 sps)

Lay the piece flat. The eight petals should radiate evenly, with the chains forming a loose octagon.

Round 3 (outer ring): Ch 1. Sc in the top of the sp-cl, 9 sc in the next ch-7 sp. Repeat from * to * 7 more times. Sl st to the first sc. (80 sc: 10 per spoke section)

Pack the 9 sc firmly along each chain so that the ring rounds out.

Round 4: Ch 1, then sc in each st around. Sl st to the first sc. Fasten off Color A. (80 sc)

This second round thickens the outer ring into the rope-like band you see in the photo. Check your measurement now: 3.75 in (9.5 cm).

Coaster Border

Border gauge: The border uses the same 6.5 sc per inch as Round 4, so it lies flat with no increases.

Round 5: Join Color B in any st. Ch 1, then sc in each st around. Sl st to the first sc. (80 sc: 10 per spoke section)

Round 6: Ch 1. Sc in each of the next 3 sts, sc in the next st, picot. Repeat from * to * 19 more times. Sl st to the first sc. Fasten off. (80 sc + 20 picots)

Why the math works: 80 divides evenly by 4, so the 20 picot repeats close exactly with no leftover stitches. The border adds 3/8 in (1.0 cm) on each side: 3.75 in + 0.75 in = 4.5 in (9.5 cm + 1.9 cm = 11.4 cm). Each spoke section has 10 stitches, so there are 2.5 picots per section. The picots are spaced evenly around the circle rather than lined up with the spokes, which matches the scalloped edge in the photo.

Weave in all ends along the outer ring.

Holder Base

Use Color A. Work in continuous rounds and mark the first st of each round.

Round 1: Make a magic ring. Ch 1, then work 8 sc in the ring. (8 sc)

Round 2: 2 sc in each st around. (16 sc)

Round 3: Sc in next st, 2 sc in next st. Repeat around. (24 sc)

Rounds 4–13: Continue increasing 8 sts evenly in each round, with one more sc between increases each round. Each round’s total is 8 times the round number:

  • Round 4: 32 sc
  • Round 5: 40 sc
  • Round 6: 48 sc
  • Round 7: 56 sc
  • Round 8: 64 sc
  • Round 9: 72 sc
  • Round 10: 80 sc
  • Round 11: 88 sc
  • Round 12: 96 sc
  • Round 13: 104 sc

Stagger the increases from round to round so the circle stays round instead of hexagonal. Sl st to the next st and fasten off.

Checkpoint: 5 in (12.7 cm) diameter. Set a finished coaster on top. It should sit inside the edge with a small margin all around.

Mini Wheels (Make 6)

Use Color A.

Round 1: Make a magic ring. Ch 1, then work 8 sc in the ring. Sl st to the first sc. (8 sc)

Round 2: Ch 5 (counts as dtr), ch 3. Dtr in next st, ch 3. Repeat from * to * 6 more times. Sl st to the 5th ch of the beginning ch-5. (8 dtr and 8 ch-3 sps)

Round 3: Ch 1. Sc in the dtr, 4 sc in the next ch-3 sp. Repeat around. Sl st to the first sc. (40 sc)

Number the Round 3 stitches 1–40, starting with the sc worked on the first dtr. Stitch 1 is the top of the wheel, stitch 11 is the right side, stitch 21 is the bottom and stitch 31 is the left side.

Checkpoint: 2.25 in (5.7 cm) diameter.

Complete Wheel 1 and fasten off. Wheels 2–6 are joined while you work their Round 3 (see Joining).

Make All Pieces

Piece Qty Colors
Coaster 6 A body, B border
Holder base 1 A
Mini wheel 6 A
Fill rows, rim, seam, end edging — A and B

Wall layout, seen from outside with the opening at the front:

[W1]-[W2]-[W3]-[W4]-[W5]-[W6]  ( opening: 14 sts )
 15    15    15    15    15    15   = 90 sts along the base

Joining

Join-as-you-go (wheels)

Work Round 3 of Wheel 2 as written up to stitch 30. For stitches 30, 31 and 32, work each one like this: insert the hook in the st, yo, pull up a loop, drop the loop from the hook, and insert the hook from front to back in the matching stitch of the previous wheel. The matches are 30 to 12, 31 to 11 and 32 to 10. Pick up the dropped loop, pull it through, then yo and pull through 2 to finish the sc.

Complete the round as written. Your count stays at 40 sc, because joining adds no stitches.

Repeat this join for Wheels 3–6, always joining the new wheel’s left side to the previous wheel’s right side. Tension: keep the joining loops the same height as a normal sc so the strip does not pucker.

Top Fill Row (Color A, RS)

Join yarn in stitch 34 of Wheel 1. On each wheel, work into stitches 34–40, then 1–8:

tr, tr, dc, dc, hdc, sc 5, hdc, dc, dc, tr, tr (15 sts)

After the last tr on one wheel, work the first tr of the next wheel directly into that wheel’s stitch 34. The small triangular gaps this leaves between wheels are part of the lattice. (90 sts) Fasten off.

Top Rim (Color B)

Join Color B in the first fill st. Ch 1, then sc in each st across. (90 sc) Fasten off.

Bottom Fill Row (Color A)

Turn the strip upside down and work along stitches 14–28 of each wheel, using the same 15-st sequence as the top fill row. (90 sts) Fasten off.

Checkpoint: The strip is about 13.8 in (35.1 cm) long and 2.5 in (6.4 cm) tall.

Wall to Base (Color B)

Stand the strip around the base with RS facing out and its bottom fill row level with Round 13 of the base. Join Color B through both layers. Ch 1, then work sc through one fill st and one base st together, 90 times. Next, work sc in each of the remaining 14 base sts alone. Sl st to the first sc. (104 sc: 90 joined + 14 across the opening)

End Edging (Color B, each end)

Work down each open end of the wall:

  • 1 sc in the end of the rim row
  • 2 sc in the side of the fill tr
  • 1 sc in each of the 5 free wheel sts (sts 29–33 on Wheel 1, sts 9–13 on Wheel 6)
  • 2 sc in the side of the bottom fill tr
  • 1 sc in the base seam st

That gives 11 sc per end and the cream frame around the U-shaped opening. Fasten off.

Checkpoint: The opening is about 2.2 in (5.6 cm) wide (14 sts ÷ 6.5 sts per inch), and the holder is 2.75 in (7.0 cm) tall.

Final Blocking

  1. Weave in all ends before blocking.
  2. Spray each coaster until it is damp but not dripping.
  3. Pin each coaster to a 4.5 in (11.4 cm) circle. Put one pin in each of the 8 spoke tips at Round 4, then pin out every picot.
  4. Check that all eight open spaces match in size and that the center hole is round.
  5. To block the holder, stuff it firmly with a towel or a 5 in (12.7 cm) jar, mist it, and straighten the cream end edging.
  6. Let everything dry fully, at least 12 hours, before unpinning.

Final Quality-Control Checklist

  • Each coaster has 8 spokes, 80 sts in Rounds 3–5 and 20 picots.
  • Every coaster measures 4.5 in (11.4 cm) within 1/8 in (0.3 cm).
  • The center hole is small, round and even.
  • The holder base measures 5 in (12.7 cm) and lies flat.
  • The wall stands upright, and all 6 wheels are joined at 3 sts each.
  • The fill rows and the rim are 90 sts each.
  • The opening is 14 sts wide and edged in cream on both sides.
  • Six coasters stack inside the holder without bulging the wall.

Troubleshooting

Spokes twist or lean: Your trtr loops are uneven. Pull each loop up to the same height before you finish the cluster.

Coaster cups like a bowl: Your ch-7 chains are too tight. Chain more loosely or use a hook one size larger for the chains only.

Outer ring waves: The chains are too loose. Work 9 sc firmly, or redo Round 3 with a tighter ch-7.

Picots lean sideways: Close each picot into the 3rd ch from the hook, not the sc.

Base ruffles: Your increases are stacking. Stagger them, or go down half a hook size.

Wall leans outward: The 90 joined sts were worked too loosely. Rework the base seam with firmer tension.

Coasters fit too tightly: Block the base slightly larger or add one more increase round to the base (112 sts). If you do, work 98 sts on each fill row and the rim.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat. Re-pin the coasters while damp to keep the picots round.

Crocheted cream lace basket and coaster displayed with coffee mug on a wooden table beside a potted plant.

Final Notes

The measurement chain for each coaster is 0.75 in (1.9 cm) after Round 1, 3.25 in (8.3 cm) at the spoke tips, 3.75 in (9.5 cm) after Round 4, and 4.5 in (11.4 cm) after the border. The holder follows from that: a 5 in (12.7 cm) base and a 90-stitch wall of six 15-stitch wheels, leaving 14 stitches open at the front. If your gauge stays at 6.5 sc per inch, every piece fits together.

Happy crocheting!

Leave a Comment