Coral Cascade Hanging Toilet Paper Holder Crochet Pattern

This hanging toilet paper holder has three round lace baskets stacked one above the other on two teal straps. Each basket holds one standard roll, and the whole thing hangs from a single peg or hook.

The baskets are coral-orange with dark teal trim. Each wall has six open fans around the bottom with a lattice of chain arches above them, framed by a solid teal band at the bottom and a deeper one at the top. The straps and hanging loop are teal, and two natural wooden rings link the side straps to the loop.

The pattern uses US crochet terms. Each basket measures 5 in (12.7 cm) across and 4 in (10.2 cm) tall. The assembled holder is about 5.5 in (14.0 cm) wide and about 26 in (66.0 cm) tall from the bottom of the lowest basket to the top of the hanging loop.

Construction is simple. You crochet each basket in one piece from the center of the base up to the top band. Then you make two side straps and one hanging strap in rows, fold the strap ends around the wooden rings, and sew the straps to the outside of the baskets.

Finished Size and Construction

  • Finished size: 5.5 in (14.0 cm) wide x about 26 in (66.0 cm) tall, hanging
  • Skill level: Intermediate (simple lace, color changes, sewing)
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), 100% cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 6 crocheted pieces (3 baskets, 2 side straps, 1 hanging strap) + 2 wooden rings
  • Layout: 3 baskets stacked vertically, with 1.6 in (4.1 cm) gaps between them
  • Piece size: each basket is 5 in (12.7 cm) across x 4 in (10.2 cm) tall
  • Size before border: basket wall 3 in (7.6 cm) tall after the lace rounds
  • Border depth: teal top band about 1 in (2.5 cm)

Materials

Use a smooth, firm cotton or cotton blend. Cotton holds the cylinder shape and doesn’t stretch much under the weight of the rolls. Acrylic works too, but the baskets will be softer.

  • Coral-orange (Color A): 110 g / 187 m (205 yd) for bases and lace
  • Dark teal (Color B): 90 g / 153 m (167 yd) for bands and straps

These amounts are based on 50 g / 85 m balls and include a margin of about 20%.

Tools:

  • 4.0 mm (G-6) crochet hook
  • 2 wooden rings, 1.5 in (3.8 cm) outside diameter
  • Stitch markers
  • Tapestry needle
  • Scissors
  • Rust-proof pins and a blocking surface
  • Optional: spray starch for crisper lace

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • BLO – back loop only
  • st(s) – stitch(es)
  • sp(s) – space(s)
  • sk – skip
  • rep – repeat
  • rnd(s) – round(s)

Special stitch – Fan: (dc, ch 1) 4 times, dc, all in the same stitch. Each Fan has 5 dc and 4 ch-1 spaces.

Gauge and Checkpoints

Gauge: 15 sc and 17 rows = 4 in (10.2 cm) in sc with a 4.0 mm hook.

Make one complete basket before you start the others. Check it at each stage:

  • After Rnd 1: the base is 1 in (2.5 cm) across.
  • After Rnd 3: the base is 3 in (7.6 cm) across.
  • After Rnd 5: the base is 5 in (12.7 cm) across and lies flat.
  • After Rnd 8: the teal bottom band stands up about 0.75 in (1.9 cm).
  • After Rnd 12: the wall is about 3 in (7.6 cm) tall.
  • After Rnd 16: the wall is 4 in (10.2 cm) tall.

If your base is too big (wider than 5.25 in / 13.3 cm), go down half a hook size. If it’s too small (under 4.75 in / 12.1 cm), go up half a size. A standard roll is about 4.5 in (11.4 cm) across, so the basket needs that 0.5 in (1.3 cm) of ease.

Crocheted tote bag detail showing teal ribbed sides and coral openwork lace pattern against neutral background.

Basket (make 3)

Base

With Color A, make a magic ring.

Rnd 1: Ch 3 (counts as dc throughout), 11 dc in ring, join with sl st to top of ch-3. (12 dc)

Rnd 2: Ch 3, dc in same st, 2 dc in each st around, join. (24 dc)

Rnd 3: Ch 3, 2 dc in next st, *dc in next st, 2 dc in next st; rep from * around, join. (36 dc)

Rnd 4: Ch 3, dc in next st, 2 dc in next st, *dc in next 2 sts, 2 dc in next st; rep from * around, join. (48 dc)

Rnd 5: Ch 3, dc in next 2 sts, 2 dc in next st, *dc in next 3 sts, 2 dc in next st; rep from * around. Join with Color B. Fasten off Color A. (60 dc)

Each round grows by 12 stitches, so the circle stays flat.

Bottom Band

Rnd 6 (turning round): With Color B, ch 1, sc in BLO of each st around, join. (60 sts worked 1-per-stitch + 0 added = 60 sc)

The unworked front loops form a ridge, and the wall turns upward here.

Rnds 7–8: Ch 1, sc in each st around, join. On Rnd 8, finish the join with Color A. Fasten off Color B. (60 sc)

Place a marker in the join of Rnd 8. This is stitch 1. Later, one strap will cover this join.

Lace Wall

Rnd 9 (fans): With Color A, ch 1, *sc in next st, sk 4 sts, Fan in next st, sk 4 sts; rep from * 5 more times, join with sl st to first sc. (6 sc and 6 Fans = 30 dc and 24 ch-1 sps)

Each repeat uses exactly 10 stitches: 1 + 4 + 1 + 4 = 10. Six repeats use all 60 stitches.

Rnd 10 (arches over fans): Sl st in first dc and in first ch-1 sp of the next Fan. Ch 1, sc in same sp, (ch 3, sc in next ch-1 sp) 3 times, ch 3, sc in next sc, ch 3, *sc in first ch-1 sp of next Fan, (ch 3, sc in next ch-1 sp) 3 times, ch 3, sc in next sc, ch 3; rep from * 4 more times, join to first sc. (30 sc and 30 ch-3 sps; 5 sps per repeat)

Rnd 11 (lattice): Sl st in next ch-3 sp, ch 1, sc in same sp, *ch 4, sc in next ch-3 sp; rep from * 28 more times, ch 4, join to first sc. (30 sc and 30 ch-4 sps)

Rnd 12 (lattice): Sl st in next ch-4 sp, ch 1, sc in same sp, *ch 4, sc in next ch-4 sp; rep from * 28 more times, ch 4. Finish the join with Color B. Fasten off Color A. (30 sc and 30 ch-4 sps)

Each sc sits in the middle of an arch from the round below, which staggers the arches into the diamond lattice. Checkpoint: the wall is about 3 in (7.6 cm) tall.

Make All Pieces

  • Baskets: 3, each using about 30 g Color A and 15 g Color B
  • Side straps: 2, Color B, about 10 g each
  • Hanging strap: 1, Color B, about 8 g

If you can, make all three baskets with the same hook and in one sitting so your tension stays the same. Measure each finished basket against the first one. They should match within 0.25 in (0.6 cm).

Side strap (make 2): With Color B, ch 76.

Row 1: Sc in 2nd ch from hook and in each ch across, turn. (75 sc)

Rows 2–4: Ch 1, sc in each st across, turn. (75 sc)

Fasten off and leave a 24 in (61.0 cm) tail. Each strap is 20 in (50.8 cm) long and about 1 in (2.5 cm) wide.

Hanging strap: With Color B, ch 61. Work 4 rows as for the side strap, with 60 sc per row. Leave a 12 in (30.5 cm) tail. The strap is 16 in (40.6 cm) long.

Layout of each side strap, counted from the bottom (15 sts = 4 in / 10.2 cm):

Sts 70–75  fold around ring    1.6 in (4.1 cm)
Sts 58–69  open strap          3.2 in (8.1 cm)
Sts 43–57  TOP basket          4 in (10.2 cm)
Sts 37–42  gap                 1.6 in (4.1 cm)
Sts 22–36  MIDDLE basket       4 in (10.2 cm)
Sts 16–21  gap                 1.6 in (4.1 cm)
Sts 1–15   BOTTOM basket       4 in (10.2 cm)

Check: 6 + 12 + 15 + 6 + 15 + 6 + 15 = 75 stitches.

Joining

Method: Whipstitch with the Color B tails.

Rings first: Thread sts 70–75 of each side strap through a wooden ring. Fold them down against the back of the strap. Whipstitch across the strap width and down both long edges of the fold. Thread 6 sts at each end of the hanging strap through the same two rings and sew them the same way. This leaves 48 sts, or 12.8 in (32.5 cm), free as the loop.

Straps to baskets: Mark stitch 1 (the Rnd 8 join) and stitch 31 on each basket. They are exactly 30 stitches apart, which is half the circumference. Center one strap over the stitch 1 column and the other over the stitch 31 column.

Line up strap stitch 1 with the base ridge (Rnd 6) of the bottom basket. Whipstitch both long edges of the strap to the basket. Sew through every stitch of Rnds 6–8 and Rnds 13–16. In the lace section, take one tacking stitch at each sc the strap crosses. Repeat for the middle basket at strap sts 22–36 and the top basket at sts 43–57.

Tension: Pull each sewing stitch just snug. Stitches that are too tight make the basket wall pucker under the strap. Stitches that are too loose let the basket tilt when a roll is inside.

Size checkpoint: Lay the holder flat. Each gap between baskets should measure 1.6 in (4.1 cm). The bottom of the lowest basket should be 18.4 in (46.7 cm) from the bottom of the rings.

Border (Top Band)

The teal top band is the border. Work it on each basket right after Rnd 12, before you attach the straps.

Border gauge: 15 sc = 4 in (10.2 cm), the same as the base and bottom band.

Rnd 13 (conversion round): With Color B, ch 1, 2 sc in each ch-4 sp around, join. (30 sps x 2 sc worked + 0 extra added = 60 sc; 10 sc per fan repeat)

Rnds 14–16: Ch 1, sc in each st around, join. (60 sc; 10 sc per fan repeat)

Fasten off and weave in the ends.

Why the math works: The base ends with 60 stitches, and the top band also has 60. That gives the top opening the same 16 in (40.6 cm) circumference as the base, so the basket stays a straight cylinder. Six repeats of 10 stitches keep the fans evenly spaced under the band. The four teal rounds add about 1 in (2.5 cm), which brings the wall to 4 in (10.2 cm).

Final Blocking

  1. Weave in all remaining ends before blocking.
  2. Spray each basket lightly with water until it is damp, not soaked.
  3. Slide each basket over a 5 in (12.7 cm) wide can, a jar, or a roll wrapped in plastic.
  4. Shape the fans so all six are open and the same size. Pull the arches evenly upward.
  5. For crisper lace, mist with spray starch.
  6. Pin the side straps flat to 20 in (50.8 cm) and the hanging strap to 16 in (40.6 cm). Let them dry.
  7. Let everything dry completely before you hang the holder.

Final Quality-Control Checklist

  • Each base measures 5 in (12.7 cm) across and lies flat.
  • Each basket wall is 4 in (10.2 cm) tall.
  • Each basket has six evenly spaced fans and 30 arches in each lattice round.
  • The top and bottom bands both have 60 stitches.
  • The straps sit exactly opposite each other, 30 stitches apart.
  • Each gap between baskets is 1.6 in (4.1 cm).
  • The ring folds are sewn securely and both rings hang level.
  • The holder hangs straight with three rolls loaded.

Troubleshooting

Base ruffles: You have too many stitches, or your tension is loose. Check that you have 60 stitches and go down a hook size.

Base cups: You missed increases. Recount each round.

Wall flares out at the top: Your Rnd 13 tension was too loose. Redo it with snugger stitches.

Fans are crowded or uneven: Count the skips. You need 4 skipped stitches on each side of every Fan.

Rnd 10 count is off: Make sure you work one sc into the sc between Fans. Each repeat needs 5 ch-3 spaces.

Baskets tilt: Add more tacking stitches through the lace, and check that the straps are exactly opposite each other.

Holder hangs crooked: The ring folds are different lengths. Re-sew both to exactly 6 stitches.

Care

Hand wash in cool water and lay flat to dry, reshaping the baskets over a can. Do not tumble dry.

Crocheted toilet paper holder with teal straps and coral lace bands holding white rolls on a wooden bathroom wall rack.

Final Notes

Here is the measurement chain:

  • The gauge is 15 sc = 4 in (10.2 cm).
  • The 60-stitch base measures 5 in (12.7 cm) across.
  • The lace wall reaches 3 in (7.6 cm), and the teal band brings it to 4 in (10.2 cm).
  • The three baskets sit on 75-stitch side straps with 1.6 in (4.1 cm) gaps. That puts the rings 18.4 in (46.7 cm) above the bottom of the holder.
  • The 16 in (40.6 cm) hanging strap brings the holder to about 26 in (66.0 cm) tall.

If your first basket matches the checkpoints, the others will too, and everything will line up when you assemble it.

Happy crocheting!

Leave a Comment