Coral Rim Duo Hanging Toilet Paper Holder Crochet Pattern

This two-tier hanging holder keeps spare toilet rolls tidy and off the floor. Two sturdy round baskets hang one above the other on coral straps that meet at a gold metal ring, so the whole thing slips over a towel hook or wall peg.

The baskets are worked in deep royal blue with a pebbly lemon peel texture on the walls and a crisp coral-red rim. The coral straps tie the colors together and give the piece a bright, modern look.

The pattern uses US crochet terms. Each basket measures about 5.7 in (14.5 cm) across and 4.3 in (10.9 cm) tall. The assembled holder hangs about 25 in (63.5 cm) from the top of the ring to the bottom of the lower basket.

Construction is simple. Each basket starts as a flat circle, turns upward with a back-loop round, builds a textured wall, and finishes with a coral rim. The two straps are worked lengthwise in rows, then whipstitched to the baskets and wrapped around the ring.

Finished Size and Construction

  • Finished size (assembled): about 25 in (63.5 cm) hanging length; 5.7 in (14.5 cm) wide
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: Bulky (#5) cotton or cotton blend
  • Hook: 6.0 mm (US J-10)
  • Number of pieces: 4 crocheted pieces (2 baskets, 2 straps) plus 1 metal ring
  • Layout: 2 baskets stacked vertically, 3 in (7.6 cm) apart, joined by 2 side straps
  • Piece size: basket 5.7 in (14.5 cm) diameter x 4.3 in (10.9 cm) tall; strap 22 in (55.9 cm) x 0.9 in (2.3 cm)
  • Size before border (rim): basket wall 3.4 in (8.6 cm) tall from the base edge
  • Border depth: coral rim 0.9 in (2.3 cm), 3 rounds

Materials

Choose a firm bulky cotton or cotton blend so the baskets hold their shape. Cotton also stands up well to bathroom humidity. The quantities below assume a yarn of about 110 m per 100 g.

  • Color A, royal blue: 180 g (198 m)
  • Color B, coral red: 70 g (77 m)

Tools:

  • 6.0 mm (US J-10) crochet hook
  • 1 metal ring, 2 in (5.1 cm) diameter (macramé or craft ring)
  • 4 locking stitch markers
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Pins or clips for assembly

All quantities include a margin of roughly 15 to 20 percent for your gauge swatch and small differences in tension.

Abbreviations (US Terms)

  • BLO – back loop only
  • ch – chain
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc – single crochet
  • sl st – slip stitch
  • st(s) – stitch(es)
  • rnd(s) – round(s)

Special stitch – lemon peel pattern (in the round): alternate sc and dc across a round. On the next round, work a dc into each sc and an sc into each dc. The short and tall stitches push against each other, which creates the pebbled texture on the walls.

Joining rounds: join each round with a sl st to the first st. The ch 1 at the start of a round does not count as a stitch.

Gauge and Checkpoints

Gauge: 12 sts and 13 rnds = 4 in (10.2 cm) in sc with a 6.0 mm hook. The lemon peel pattern works up at the same gauge.

Make one full basket before you start the second. It works as your gauge test, because you can drop a roll inside and check the fit. Standard toilet rolls are about 4.5 in (11.4 cm) across, so they should slide in with a little room to spare.

Checkpoints:

  • After Rnd 5 (30 sts): the base measures about 3.2 in (8.1 cm) across.
  • After Rnd 9 (54 sts): the base measures about 5.7 in (14.5 cm) across and lies flat.
  • After Rnd 20: the wall measures about 3.4 in (8.6 cm) from the base edge.
  • After Rnd 23: the basket measures 4.3 in (10.9 cm) tall and 18 in (45.7 cm) around.

If your base is too big, go down half a hook size. If it is too small and a standard roll doesn’t drop in easily, go up half a hook size. A base that ruffles means you’re working too loosely. A base that cups means you’re working too tightly.

A handmade crocheted basket in coral-pink and cobalt-blue with brass ring handles and detailed stitching.

Basket (Make 2)

Base

With Color A, make a magic ring.

Rnd 1: Ch 1, 6 sc in ring, sl st to first sc to join. (6 sts)

Rnd 2: Ch 1, inc in each st around, join. (12 sts)

Rnd 3: Ch 1, sc in next st, inc in next st 6 times, join. (18 sts)

Rnd 4: Ch 1, sc in next st, inc in next st, sc in next st 6 times, join. (24 sts)

Rnd 5: Ch 1, sc in next 3 sts, inc in next st 6 times, join. (30 sts)

Rnd 6: Ch 1, sc in next 2 sts, inc in next st, sc in next 2 sts 6 times, join. (36 sts)

Rnd 7: Ch 1, sc in next 5 sts, inc in next st 6 times, join. (42 sts)

Rnd 8: Ch 1, sc in next 3 sts, inc in next st, sc in next 3 sts 6 times, join. (48 sts)

Rnd 9: Ch 1, sc in next 7 sts, inc in next st 6 times, join. (54 sts)

Staggering the increases keeps the circle round instead of hexagonal. Check that the base measures 5.7 in (14.5 cm) and lies flat.

Wall

Rnd 10 (turning round): Ch 1, sc in BLO of each st around, join. (54 sts)

The unworked front loops form a neat ridge that marks the base edge and turns the wall upward.

Rnd 11: Ch 1, sc in next st, dc in next st 27 times, join. (54 sts: 27 sc, 27 dc)

Rnd 12: Ch 1, dc in next sc, sc in next dc 27 times, join. (54 sts: 27 dc, 27 sc)

Rnd 13: Ch 1, sc in next dc, dc in next sc 27 times, join. (54 sts)

Rnds 14–20: Alternate Rnds 12 and 13, ending with a Rnd 12 repeat on Rnd 20. (54 sts in every round)

That gives 10 lemon peel rounds (Rnds 11–20). The wall has no increases, so it rises straight. It measures about 3.4 in (8.6 cm) from the base ridge. Fasten off Color A.

Keep the joins lined up in one vertical line. This line becomes the back of the basket.

Rim (Border)

The coral rim is the border of each basket. It uses the same gauge as the rest of the basket: 12 sts and 13 rnds = 4 in (10.2 cm).

Rnd 21: Join Color B in any st at the back seam. Ch 1, sc in each st around, join. (54 sts)

Rnd 22: Ch 1, sc in each st around, join. (54 sts)

Rnd 23: Ch 1, sc in each st around. (54 sts) Fasten off with an invisible join and weave in the ends.

Why the math works: the wall has 54 sts. At 3 sts per inch, that equals 18 in (45.7 cm) around. Each rim round has exactly 54 sc, one in each existing st with none added, so the rim matches the wall’s circumference and won’t flare or pull in. Three sc rounds at 13 rnds per 4 in make a 0.9 in (2.3 cm) rim. Together, the 14 wall and rim rounds (Rnds 10–23) give a height of 4.3 in (10.9 cm).

Repeat the base, wall and rim for the second basket, then compare the two side by side. They should match within 0.25 in (0.6 cm).

Strap (Make 2)

The straps are worked lengthwise, so the stitches run along the length of the strap.

With Color B, ch 67.

Row 1: Sc in 2nd ch from hook and in each ch across, turn. (66 sts)

Row 2: Ch 1, sc in each st across, turn. (66 sts)

Row 3: Ch 1, sc in each st across. (66 sts) Fasten off, leaving a 24 in (61.0 cm) tail for sewing.

Each strap measures 22 in (55.9 cm) long (66 sts at 3 sts per inch) and 0.9 in (2.3 cm) wide (3 rows).

Strap segments: place markers along one long edge to divide each strap into these sections, counting from the bottom end:

  • 3 sts = 1 in (2.5 cm): bottom overlap on the lower basket rim
  • 9 sts = 3 in (7.6 cm): free gap between the baskets
  • 13 sts = 4.3 in (10.9 cm): attached along the full height of the upper basket
  • 36 sts = 12 in (30.5 cm): free length up to the ring
  • 5 sts = 1.7 in (4.3 cm): wrapped around the ring

Check: 3 + 9 + 13 + 36 + 5 = 66 sts.

Make All Pieces

  • Color A (royal blue): 2 basket bases and walls (Rnds 1–20)
  • Color B (coral red): 2 basket rims (Rnds 21–23) and 2 straps
  • Hardware: 1 metal ring, 2 in (5.1 cm)

Mark both straps identically before assembly so the two sides hang at exactly the same height.

Layout (front view):

            [ RING ]
           /        \
   Strap 1            Strap 2
      |                  |
      |=[  TOP BASKET  ]=|
      |                  |    3 in (7.6 cm) gap
      |=[ BOTTOM BASKET]=|
     (strap ends overlap the bottom rim only)

The straps sit directly opposite each other, at the left and right sides of each basket. Turn the basket so the round-join seam is at the back, midway between the straps.

Joining

Method: whipstitch with the Color B tail. Work through both loops of the strap’s edge stitches and through the basket fabric underneath.

  1. Mark the left and right sides of each basket at the rim, 27 sts apart (half of 54).
  2. Bottom basket: pin the bottom 3 sts of each strap over a side marker so the strap end covers the 3 rim rounds. Whipstitch all the way around the overlap.
  3. Gap: leave the next 9 sts free. This sets the 3 in (7.6 cm) space between the baskets.
  4. Top basket: pin the next 13 sts flat against the outside of the upper basket, from the base ridge to the top of the rim. Along both long edges, sew one strap stitch to each wall round. The basket has 14 rounds and the strap has 13 sts here, so ease the one extra round in at the rim.
  5. Ring: leave the next 36 sts free. Fold the last 5 sts over the ring toward the wrong side and sew the end firmly to the strap. Repeat with the second strap on the same ring.

Tension advice: sew snugly, but don’t pull so tight that the basket wall puckers. Before sewing each section, check that the strap lies flat with no twist.

Size checkpoint: hang the holder. The gap between the top of the lower rim and the base of the upper basket should be 3 in (7.6 cm). The total hanging length should be about 25 in (63.5 cm). If one side tilts, move that strap’s ring fold by one stitch.

Final Blocking

  1. Put a toilet roll or a container of similar size in each basket.
  2. Lightly mist the baskets and straps with water until they are damp but not soaked.
  3. Press the base flat, push the walls upright, and shape the rim into an even circle.
  4. Lay the straps flat and smooth out any twist.
  5. Let everything dry completely, about 24 hours, with the fillers still inside.
  6. Remove the fillers and hang the holder.

Final Quality-Control Checklist

  • Both bases lie flat and measure 5.7 in (14.5 cm) across.
  • Each basket has 54 sts in every wall and rim round.
  • Both baskets are 4.3 in (10.9 cm) tall with a 0.9 in (2.3 cm) coral rim.
  • The round-join seams sit at the back.
  • The straps measure 22 in (55.9 cm) and lie flat without twisting.
  • The gap between the baskets is 3 in (7.6 cm) on both sides.
  • The ring hangs centered and the baskets hang level.
  • All ends are woven in securely.

Troubleshooting

Base ruffles: your tension is too loose for this stitch count. Go down a hook size and check that you haven’t added extra increases.

Base cups upward: you’re working too tightly. Go up a hook size.

Wall flares out: count your stitches, because you may have added one at the join. Every wall round must have 54 sts.

Lemon peel texture looks flat: make sure every sc sits on a dc and every dc sits on an sc.

Seam drifts sideways: this is normal with joined rounds. Keep the seam at the back.

Basket sags under the roll: use a firmer cotton, or work the wall with a smaller hook.

Straps stretch over time: work them with a hook one size smaller for a denser band.

Holder tilts: check that the straps sit exactly opposite each other, 27 sts apart.

Care

Hand wash in cool water with mild soap, reshape, and lay flat to dry with the baskets stuffed. If your ring isn’t rust-resistant, remove it before washing.

Crocheted toilet paper holder in coral and navy stripes hanging from brass hooks in a modern tiled bathroom.

Final Notes

The measurements build on each other. The 54-stitch base is 5.7 in (14.5 cm) across and 18 in (45.7 cm) around. The 54-stitch wall rises straight to 3.4 in (8.6 cm), and the 3-round rim brings each basket to 4.3 in (10.9 cm). Each 66-stitch strap measures 22 in (55.9 cm) and is divided into 3 + 9 + 13 + 36 + 5 stitches. That sets a 3 in (7.6 cm) gap between the baskets and a hanging length of about 25 in (63.5 cm).

Check your gauge on the first basket and keep every wall and rim round at 54 stitches. If you do, the straps and spacing will line up.

Happy crocheting!

Leave a Comment