Cranberry Frost Tree Ornament Crochet Pattern

The Cranberry Frost Tree is a small layered Christmas tree ornament. It has three burgundy fan-shaped tiers, a short trunk, and a soft cream picot edge on each tier that looks like a snowy hem. A satin bow, a pearl center and a few scattered pearl beads give it a vintage, heirloom look.

The main color is deep cranberry burgundy with cream trim. The same pattern works well in dusty pink, sage green or lavender with the same cream edging, so a few ornaments in mixed colors look good on one tree.

This pattern uses US crochet terms. The finished ornament measures 4 in (10.2 cm) wide and 4.7 in (11.9 cm) tall from the top tier’s point to the bottom of the trunk. The hanging loop adds 1.5 in (3.8 cm), for a total hanging height of 6.2 in (15.7 cm).

Here’s how it’s made: you work three tiers flat as double-crochet wedges, starting from a magic ring and turning each row. You add a two-row cream border to the curved edge of each tier, then crochet a small trunk and a cord loop. Finally, you stack and sew the parts and add the ribbon and pearls.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) wide × 4.7 in (11.9 cm) tall, plus a 1.5 in (3.8 cm) loop
  • Skill level: Easy+ (advanced beginner)
  • Terminology: US
  • Yarn weight: DK (light worsted, #3), cotton or cotton blend
  • Hook: 3.5 mm (US E-4)
  • Number of pieces: One ornament, built from 5 small parts (3 tiers, 1 trunk, 1 loop)
  • Layout: Tiers stacked vertically, each apex 0.8 in (2.0 cm) above the one below
  • Tier widths before border: 3.5 in (8.9 cm), 2.8 in (7.1 cm), 2.1 in (5.3 cm)
  • Tier widths after border: 4 in (10.2 cm), 3.3 in (8.4 cm), 2.6 in (6.6 cm)
  • Border depth: 0.3 in (0.8 cm)

Materials

Choose a smooth, mercerized DK cotton or cotton blend. It shows the radiating stitch columns clearly and holds the picot loops crisp. Avoid fuzzy yarns, which hide the ridges.

  • Color A – Burgundy (tiers, trunk, loop): 10 g / 23 m
  • Color B – Cream (border): 4 g / 9 m

These quantities include a margin of about 25% for gauge swatching and sewing tails. For the pink, sage or lavender versions, swap Color A for the same amount in the new color.

Tools and notions:

  • 3.5 mm (US E-4) crochet hook
  • Tapestry needle
  • Sewing needle and cream thread
  • 8 in (20.3 cm) of cream satin ribbon, 0.375 in (1.0 cm) wide
  • One 6 mm pearl bead (bow center)
  • Seven 4 mm pearl beads (tiers)
  • Scissors, ruler, rust-proof pins
  • Optional: a little fabric glue for the ribbon knot

Abbreviations (US Terms)

  • MR – magic ring
  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side
  • * * – repeat the instructions between asterisks as stated

Special stitch – Picot loop: ch 3, then go straight into the next sc pair. Don’t slip stitch the loop closed; it should sit as a small open arch between pairs.

Turning chain note: in every tier row, the ch 3 at the start counts as the first dc. “Dc in same st” means work into the base of the turning chain.

Gauge and Checkpoints

Gauge: 20 sc = 4 in (10.2 cm), and 5 sc rows = 1 in (2.5 cm). Each dc row in the tiers adds 0.4 in (1.0 cm) of radius.

Make Tier 3 first as your test piece. It’s the smallest, so it shows your gauge quickly.

Checkpoints (measure the straight edge, from the ring to the outer corner):

  • Tier 3 after Row 3: 1.2 in (3.0 cm)
  • Tier 2 after Row 4: 1.6 in (4.1 cm)
  • Tier 1 after Row 5: 2.0 in (5.1 cm)
  • Trunk after Row 6: 0.8 in (2.0 cm) wide × 1.2 in (3.0 cm) long

If a checkpoint is off by more than 0.1 in (0.3 cm):

  • Too big: go down to a 3.25 mm hook.
  • Too small: go up to a 3.75 mm hook.

If the tier ruffles instead of lying flat, your dc are too short; loosen the yarn-over. If it cups, your dc are too tall; snug them slightly.

Detail of burgundy crocheted pouch with cream edging, cream silk ribbon bow and pearl embellishments.

Tiers (Make 3)

Every tier uses the same wedge formula: the first row has 4 dc, and every later row adds exactly 4 dc. This gives a 120° wedge that lies flat, with a pointed apex and two straight sloped sides.

With Color A, leave a 10 in (25.4 cm) starting tail before the magic ring. You’ll use it later to sew the tier in place.

Tier 1 (Bottom Tier)

Row 1 (RS): MR, ch 3 (counts as dc), 3 dc in ring. Pull the ring closed. Turn. (4 dc)

Row 2: Ch 3, dc in same st, 2 dc in each of next 3 sts. Turn. (8 dc)

Row 3: Ch 3, dc in same st, dc in next st, *2 dc in next st, dc in next st* 3 times. Turn. (12 dc)

Row 4: Ch 3, dc in same st, dc in next 2 sts, *2 dc in next st, dc in next 2 sts* 3 times. Turn. (16 dc)

Row 5: Ch 3, dc in same st, dc in next 3 sts, *2 dc in next st, dc in next 3 sts* 3 times. (20 dc)

Fasten off Color A.

Checkpoint: the straight edge measures 2.0 in (5.1 cm), and the corner-to-corner width is 3.5 in (8.9 cm).

Tier 2 (Middle Tier)

Work Rows 1–4 as for Tier 1. Fasten off. (16 dc)

Checkpoint: the straight edge measures 1.6 in (4.1 cm), and the width is 2.8 in (7.1 cm).

Tier 3 (Top Tier)

Work Rows 1–3 as for Tier 1. Fasten off. (12 dc)

Checkpoint: the straight edge measures 1.2 in (3.0 cm), and the width is 2.1 in (5.3 cm).

Weave in only the fastening-off tails. Keep the long starting tails at the apex for sewing.

Trunk

With Color A, ch 5.

Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (4 sc)

Rows 2–6: Ch 1, sc in each st across. Turn. (4 sc)

Fasten off, leaving a 6 in (15.2 cm) tail.

Checkpoint: 0.8 in (2.0 cm) wide × 1.2 in (3.0 cm) long. When the tree is assembled, 0.4 in (1.0 cm) of the trunk tucks behind Tier 1 and 0.8 in (2.0 cm) shows below it.

Hanging Loop

With Color A, leave an 8 in (20.3 cm) tail, then ch 20.

Sl st in the back bump of the 2nd ch from the hook and in each ch across. (19 sl st)

Fasten off. This makes a firm cord about 3.6 in (9.1 cm) long. Fold it in half. The ends will overlap the back of Tier 3 by 0.3 in (0.8 cm), which leaves a 1.5 in (3.8 cm) loop standing above the apex.

Border

The cream border is worked on the curved edge of each tier only. The two straight sloped sides stay plain burgundy, as in the photo.

Border gauge: one pair of 2 sc plus one ch-3 picot loop covers about 0.4 in (1.0 cm) of curved edge. The border adds 0.3 in (0.8 cm) of depth all around the curve.

Setup: With the RS facing, join Color B with a sl st in the top of the last dc worked on the tier’s final row. This is one outer corner of the curve.

Border Row 1 (trim): Ch 1, sc in the same st and in each dc across the curved edge. Turn.

  • Tier 1: 20 sc (20 worked 1-per-stitch + 0 extra)
  • Tier 2: 16 sc (16 worked 1-per-stitch + 0 extra)
  • Tier 3: 12 sc (12 worked 1-per-stitch + 0 extra)

Border Row 2 (picot): Ch 1, sc in first 2 sc, *ch 3, sc in next 2 sc* repeat across. Fasten off and weave in the ends.

  • Tier 1: repeat 9 times → 10 sc pairs (20 sc) + 9 picot loops
  • Tier 2: repeat 7 times → 8 sc pairs (16 sc) + 7 picot loops
  • Tier 3: repeat 5 times → 6 sc pairs (12 sc) + 5 picot loops

Why the math works: every tier ends on a multiple of 4 dc, so the sc count is always even. An even count splits cleanly into pairs of 2 sc, and the number of loops is always one less than the number of pairs. Both ends of the curve finish on a full sc pair, so the edge is symmetrical. Border Row 1 adds no stitches, so the curve keeps its flat 120° shape and doesn’t ruffle.

Checkpoint after the border:

Tier Width Apex-to-hem height
Tier 1 4 in (10.2 cm) 2.3 in (5.8 cm)
Tier 2 3.3 in (8.4 cm) 1.9 in (4.8 cm)
Tier 3 2.6 in (6.6 cm) 1.5 in (3.8 cm)

Assembly

Block the tiers lightly before assembly (see below) so they lie flat while you sew.

  1. Trunk: Center the trunk behind Tier 1, so 0.4 in (1.0 cm) overlaps the back of the curved edge. Whipstitch it to the back of the Border Row 1 stitches using the trunk tail.
  2. Tier 2: Lay Tier 2 on top of Tier 1, with its apex 0.8 in (2.0 cm) above Tier 1’s apex and its center line straight. Using Tier 2’s starting tail, sew through both layers at the apex and down the center line for 0.5 in (1.3 cm). Tier 2’s curved hem now covers the upper 1.1 in (2.8 cm) of Tier 1.
  3. Tier 3: Lay Tier 3 on top of Tier 2, with its apex 0.8 in (2.0 cm) above Tier 2’s apex. Sew it the same way. Tier 3 covers the upper 0.7 in (1.8 cm) of Tier 2.
  4. Loop: Fold the loop in half and sew both ends to the back of Tier 3 at the apex, overlapping 0.3 in (0.8 cm).
  5. Bow: Tie the ribbon into a bow about 1.75 in (4.4 cm) wide, and trim the tails at an angle. Sew it to the front of Tier 3’s apex, then sew the 6 mm pearl to the bow knot.
  6. Pearls: With the cream thread, sew on the 4 mm pearls: 1 at the center of Tier 3 just below the bow, 3 spaced across Tier 2, and 3 spaced across Tier 1.

Size check: top apex to the bottom of Tier 1’s hem = 0.8 + 0.8 + 2.3 = 3.9 in (9.9 cm). Add 0.8 in (2.0 cm) of visible trunk for 4.7 in (11.9 cm) total.

Final Blocking

  1. Lightly mist the assembled ornament, or steam it from 1 in (2.5 cm) above. Keep the iron off the ribbon.
  2. Pin it face up on a blocking mat at 4 in (10.2 cm) wide and 4.7 in (11.9 cm) tall.
  3. Pin each picot loop of Tier 1 into a neat arch, then do Tiers 2 and 3.
  4. Check that the trunk hangs straight down the center line.
  5. Let it dry completely (2–3 hours), then unpin.

Final Quality-Control Checklist

  • Tier stitch counts are 20, 16 and 12 dc.
  • Picot loop counts are 9, 7 and 5, and each curve begins and ends with an sc pair.
  • The straight sides of each tier are plain burgundy, with no cream.
  • Each tier’s apex is 0.8 in (2.0 cm) above the one below it.
  • The trunk shows 0.8 in (2.0 cm) below Tier 1 and is centered.
  • The loop stands 1.5 in (3.8 cm) above the apex.
  • The finished size is 4 in × 4.7 in (10.2 cm × 11.9 cm), within 0.25 in (0.6 cm).
  • Pearls and bow are firmly sewn, and no tails are visible from the front.

Troubleshooting

  • Tier ruffles: your dc are too short, or you added an extra increase. Recount: each row must add exactly 4 dc.
  • Tier cups into a cone: you missed an increase, or your tension is too tight. Recount, or go up a hook size.
  • Picot border ends unevenly: your Border Row 1 count is odd. Redo it with exactly 1 sc per dc.
  • The magic ring opens: pull the starting tail firmly and secure it with one stitch on the WS before sewing.
  • Tiers drift sideways: baste the center lines together with a contrasting thread before the final sewing.
  • The loop twists: steam it flat, then sew the two ends side by side, not stacked.

Care

Spot clean with cool water and mild soap, then reshape and dry flat. Store the ornament flat in tissue so the picot loops and bow stay crisp.

Crocheted burgundy Christmas tree ornament with white edging and bow hanging from evergreen branch with warm holiday lights.

Final Notes

The measurement chain is short and easy to check:

  • Tier straight edges: 2.0, 1.6 and 1.2 in (5.1, 4.1 and 3.0 cm)
  • Border adds 0.3 in (0.8 cm)
  • Tier widths: 4, 3.3 and 2.6 in (10.2, 8.4 and 6.6 cm)
  • Apexes stacked 0.8 in (2.0 cm) apart
  • Trunk shows 0.8 in (2.0 cm)
  • Finished ornament: 4 in × 4.7 in (10.2 cm × 11.9 cm), plus a 1.5 in (3.8 cm) loop

Check each number as you go, and every Cranberry Frost Tree will match the last. Happy crocheting!

Leave a Comment