Daisy Stripe Letter G Keychain Crochet Pattern

This Daisy Stripe Letter G Keychain is a small, sturdy initial charm with three soft stripes that follow the curve of the letter. Dusty rose runs along the outer edge, cream sits in the middle, and sage green lines the inner curve. Three cream daisies with yellow centers and small green leaves are sewn on top. A short gold chain with a split ring lets it hang from a bag, keys or a zipper pull.

The style is cottagecore: muted colors, firm single crochet texture and a few flowers on top. It makes a quick personalized gift. This pattern is written for the letter G, and the same strip method works for other curved letters.

The pattern uses US crochet terms. The finished letter is 3.25 in (8.3 cm) wide and 3.5 in (8.9 cm) tall, not counting the hanging loop and chain.

The letter is one single-layer strip worked in rows along its length. The foundation chain becomes the inner green edge, and each new row is worked outward toward the outer edge. Increases in the curve and at the crossbar corner bend the strip into a G as you go. The two rose rows act as the border. The daisies, leaves and hanging loop are added last.

Finished Size and Construction

  • Finished size: 3.25 in (8.3 cm) wide x 3.5 in (8.9 cm) tall
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: DK / light (3), cotton or cotton blend
  • Hook: 3.0 mm
  • Number of pieces: 1 letter strip, plus 3 daisy appliqués, 6 leaf appliqués and a hanging loop
  • Layout: one letter, single layer, used flat or hung as a keychain
  • Strip width: 6 rows, 0.85 in (2.2 cm)
  • Size before border (after Row 4): 2.75 in (7.0 cm) wide x 3.0 in (7.6 cm) tall, strip width 0.6 in (1.5 cm)
  • Border depth: 2 rose rows, 0.25 in (0.6 cm)

Materials

Use a smooth DK cotton or cotton blend. Cotton keeps the stitches crisp and holds the letter’s shape on a keychain. Avoid fuzzy or very stretchy yarn, because the curve depends on firm stitches.

  • Sage green (A): 3 g, about 7 m (strip and leaves)
  • Cream (B): 3 g, about 7 m (strip and daisy petals)
  • Dusty rose (C): 3 g, about 7 m (border rows and hanging loop)
  • Yellow (D): 1 g, about 2 m (daisy centers)

Tools:

  • 3.0 mm crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers (4)
  • 1 in (2.5 cm) gold split ring with a gold chain about 1.5 in (3.8 cm) long, plus 1 jump ring
  • Rust-proof pins and a foam blocking board
  • A small piece of paper for a shaping template

All quantities include a margin for swatching, tails and small mistakes.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • MR – magic ring
  • st(s) – stitch(es)
  • rep – repeat

Special stitch – Large daisy petal: (ch 2, 2 dc, ch 2, sl st) all in the same stitch.

Special stitch – Small daisy petal: (ch 1, 2 hdc, ch 1, sl st) all in the same stitch.

Gauge and Checkpoints

Gauge: 6 sc and 7 rows = 1 in (2.5 cm) in sc worked in rows.

Make a swatch of 12 sc by 14 rows. It should measure 2 in (5.1 cm) square. Gauge matters more than it seems on a piece this small. One extra stitch per inch changes both the curve and the overall size.

Treat the letter itself as your test piece. Work Rows 1–2, then check your measurements before going on.

Measurement checkpoints:

  1. Foundation (33 sc in Row 1): 5.5 in (14.0 cm) long.
  2. After Row 2: the strip is about 0.3 in (0.8 cm) wide and starts to bend.
  3. After Row 4: the 48-st outer edge is about 8 in (20.3 cm). Shaped, the letter is 2.75 in (7.0 cm) wide x 3.0 in (7.6 cm) tall.
  4. After Row 6: the 58-st outer edge is about 9.7 in (24.6 cm). The letter is 3.25 in (8.3 cm) x 3.5 in (8.9 cm).

If your piece is too big: go down to a 2.75 mm hook. If it’s too small: go up to a 3.25 mm hook. If the curve ruffles, the outer rows are too loose. If it cups, they are too tight. To fix either problem, change hooks for the rose rows only.

Close-up of white crocheted daisy flowers with yellow centers, green stems, and mauve accents on a wooden surface.

Strip Sections

Every row is divided into five sections along the strip. Place markers between the sections in Row 1 and move them up as you work.

  • T – Terminal: the top right end of the G
  • C – Curve: the long curve around the left side and bottom
  • S – Stem: the short straight section going up the right side
  • K – Corner: where the strip turns left into the crossbar
  • B – Bar: the crossbar, which ends pointing toward the center

Odd rows are worked from T to B, and even rows from B to T. All increases fall in C and K, the two sections that turn.

The ch 1 at the start of each row does not count as a stitch.

Letter Strip: Rows 1–4

Row 1 (A, green): Ch 34. Sc in the back bump of the 2nd ch from the hook and in each ch across. Section counts: T 3, C 21, S 3, K 1, B 5. = 33 sc. Turn.

Row 2 (A): Ch 1. Working from B to T:

  • B: sc 5
  • K: inc in the corner st (2)
  • S: sc 3
  • C: sc 1, (inc, sc 4) 4 times (25)
  • T: sc 3

= 38 sc (5 + 2 + 3 + 25 + 3). Fasten off A.

Row 3 (B, cream): Join B in the first st at the T end. Ch 1. Working from T to B:

  • T: sc 3
  • C: (sc 5, inc) 4 times, sc 1 (29)
  • S: sc 3
  • K: sc 1, inc (3)
  • B: sc 5

= 43 sc (3 + 29 + 3 + 3 + 5). Turn.

Row 4 (B): Ch 1. Working from B to T:

  • B: sc 5
  • K: sc 1, inc, sc 1 (4)
  • S: sc 3
  • C: sc 1, (inc, sc 6) 4 times (33)
  • T: sc 3

= 48 sc (5 + 4 + 3 + 33 + 3). Fasten off B.

Checkpoint: lay the strip flat and ease it into a G. The green inner edge wraps around the counter, the open space inside the letter. The bar points left, toward the inside of the curve. The letter should measure 2.75 in (7.0 cm) x 3.0 in (7.6 cm).

Border: Rows 5–6 (Rose Outer Band)

The two rose rows are the border. They frame the whole outer edge of the G, including the outer corner where the stem turns into the bar.

Border gauge: the same as the body, 6 sc and 7 rows = 1 in (2.5 cm). Two rows add 0.25 in (0.6 cm) to every outer side.

Row 5 (C, rose): Join C in the first st at the T end. Ch 1. Working from T to B:

  • T: sc 3
  • C: (sc 7, inc) 4 times, sc 1 (37)
  • S: sc 3
  • K: sc 2, inc, sc 1 (5)
  • B: sc 5

= 53 sc (3 + 37 + 3 + 5 + 5). Turn.

Row 6 (C): Ch 1. Working from B to T:

  • B: sc 5
  • K: sc 2, inc, sc 2 (6)
  • S: sc 3
  • C: sc 1, (inc, sc 8) 4 times (41)
  • T: sc 3

= 58 sc (5 + 6 + 3 + 41 + 3). Fasten off C, leaving a 6 in (15.2 cm) tail to weave in.

Stitch counts by section for the border:

Section Row 4 Row 5 Row 6
T 3 3 3
C 33 37 41
S 3 3 3
K 4 5 6
B 5 5 5
Total 48 53 58

Why the math works: When a strip bends, each row on the outside of the bend has to be longer than the row before it. The extra length per row is the row height times the turning angle in radians. The curve turns 270 degrees (4.71 radians), so each row needs 1/7 in x 4.71 = 0.67 in more. At 6 sts per inch that is 4 sts, so C gains 4 sts per row. The corner turns 90 degrees (1.57 radians), which needs 0.22 in per row, or about 1.3 sts. One increase per row plus blocking covers it. T, S and B are straight, so their counts never change. From Row 2 to Row 6 the strip gains 5 sts per row: 33 + (5 x 5) = 58.

Hanging Loop

Hold the letter right side up and find the top of the curve by counting 7 sts in from the T end along Row 6.

  1. Join C with a sl st in the 7th st from the T end.
  2. Ch 8, skip 1 st, sl st in the next st.
  3. Turn. Work 12 sc into the ch-8 space, then sl st in the first joining st.
  4. Fasten off and weave in the tail.

The loop stands about 0.4 in (1.0 cm) above the edge. Thread the jump ring through the loop, then attach the chain and split ring.

Daisies (Make 3)

Make 2 large daisies and 1 small daisy.

Large daisy (make 2):

  • Rnd 1 (D, yellow): MR, 5 sc in the ring, pull closed, sl st to the first sc. = 5 sc. Fasten off D.
  • Rnd 2 (B, cream): Join B in any sc. Work a large daisy petal in the same st, sl st in the next st; rep from * 4 more times, placing the last sl st in the joining st. = 5 petals.* Fasten off, leaving an 8 in (20.3 cm) tail for sewing.

Large daisy diameter: 0.9 in (2.3 cm).

Small daisy (make 1): Work as for the large daisy, but use small daisy petals in Rnd 2. = 5 petals. Diameter: 0.7 in (1.8 cm).

Leaves (Make 6)

With A:

Ch 5. Sc in the 2nd ch from the hook, hdc in the next ch, sc in the next ch, sl st in the last ch. Turn the piece so you can work along the opposite side of the chain: sc in the next ch, hdc in the next ch, sc in the next ch, then sl st in the skipped tip ch. = 8 sts. Fasten off, leaving a 6 in (15.2 cm) tail.

Leaf length: 0.6 in (1.5 cm).

Appliqué Placement

Sew the appliqués on after blocking (see below), once the letter is flat.

  • Top cluster: Sew 1 large daisy over the T end, centered across the cream and green rows. Tuck 1 leaf under its left side and 2 leaves under its right side so the tips show.
  • Lower left cluster: Sew 1 large daisy over the lower left part of the curve, overlapping the rose and cream rows. Sew the small daisy just to its right, slightly overlapping it. Tuck 1 leaf above the large daisy, 1 to its left and 1 below the pair.

Sew the leaves on first and the daisies last, so the flowers sit on top. Use small stitches through the back loops of the petal edges only. Keep the stitches on the back of the letter shallow so they don’t show on the front.

Final Blocking

  1. Draw a G outline 3.25 in (8.3 cm) wide and 3.5 in (8.9 cm) tall on paper, with a band width of 0.85 in (2.2 cm).
  2. Lay the paper on a foam board and cover it with plastic wrap.
  3. Mist the letter lightly with a spray bottle.
  4. Pin the outer rose edge to the outline. Start at the corner and the T end, then pin the curve.
  5. Pin the inner green edge so the counter is evenly rounded.
  6. Square off the T and B ends so the stripes run straight across.
  7. Steam lightly from 0.5 in (1.3 cm) above the letter. Don’t press it, so the stitch texture stays raised.
  8. Let it dry completely before removing the pins. Then add the appliqués and hardware.

Final Quality-Control Checklist

  • Row counts are 33, 38, 43, 48, 53 and 58.
  • From inside to outside, the stripes are green, cream, rose.
  • The letter measures 3.25 in (8.3 cm) x 3.5 in (8.9 cm).
  • The curve lies flat, with no ruffling or cupping.
  • The T and B ends are square and the stripes line up.
  • The crossbar points toward the inside of the G.
  • Two large daisies and one small daisy are sewn on, with 6 leaves showing.
  • The hanging loop is at the top and the jump ring is fully closed.
  • All tails are woven in on the back.

Troubleshooting

  • Edge ruffles: The outer rows are too loose. Redo the rose rows with a smaller hook.
  • Letter cups or curls: The outer rows are too tight. Use a larger hook for Rows 5–6, or block more firmly.
  • Corner looks pinched: Check that K has 6 sts in Row 6, then block the corner into a gentle right angle.
  • Bar points the wrong way: The strip is flipped. Turn it over; both sides look the same.
  • Counts are off: Count each section between markers instead of the whole row.
  • Daisy petals droop: Pull the MR tight and keep the petal sl sts snug.
  • Loop stretches: Work a round of sl sts around the loop.

Care

Spot clean with mild soap and cool water, then reshape and dry flat. Don’t put it in the dryer, and keep the metal hardware dry so it doesn’t tarnish.

Cream tote with crocheted letter G in pink and green, decorated with white daisies, resting on a wooden bench outdoors.

Final Notes

Here is the measurement chain. A gauge of 6 sc and 7 rows per 1 in (2.5 cm) gives a 33-st foundation of 5.5 in (14.0 cm). After Row 4 the outer edge is 48 sts, about 8 in (20.3 cm), and the letter is 2.75 in (7.0 cm) x 3.0 in (7.6 cm). The two rose border rows add 0.25 in (0.6 cm) on each outer side. That gives a 58-st outer edge of about 9.7 in (24.6 cm) and a finished G of 3.25 in (8.3 cm) x 3.5 in (8.9 cm). Add the daisies, leaves and gold chain, and your keychain is ready to clip on.

Happy crocheting!

Leave a Comment