This hanging holder keeps four spare rolls neatly stacked on the wall, using no floor or shelf space. Each basket is a short, sturdy cylinder with a band of pointed windows. Together they look a little like a row of small arched shelves.
The color scheme is deep emerald green for the baskets and light natural tan for the rims and straps. Natural wooden rings at the strap ends match the warm tan. The fan shells and pointed windows give a slightly Gothic, vintage look, and the firm cotton fabric keeps every basket in shape.
The pattern uses US crochet terms. Each basket measures 5.75 in (14.6 cm) across and 3.75 in (9.5 cm) tall, which fits a standard roll about 4.5 in (11.4 cm) wide. The finished holder hangs 25 in (63.5 cm) from the top rings to the bottom of the lowest basket.
Construction is simple. You crochet four baskets in the round: base first, then wall, then tan rim. Next you make two slip-stitch cords with a wooden ring at each end. Finally, you tie and sew the cords to opposite sides of each rim.
Finished Size and Construction
- Basket size: 5.75 in (14.6 cm) diameter x 3.75 in (9.5 cm) tall
- Hanging length: 25 in (63.5 cm), top rings to bottom of Basket 4
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Bulky (#5) cotton cord
- Hook: 5.0 mm (H-8)
- Number of pieces: 6 (4 baskets, 2 straps)
- Layout: 1 column of 4 baskets, with a strap on each side
- Basket circumference: 54 sts = 18 in (45.7 cm)
- Height before rim: 2.75 in (7.0 cm)
- Rim (border) depth: 1 in (2.5 cm)
Materials
Use a smooth, firm bulky cotton or cotton-blend cord. Cotton holds its shape in a damp bathroom and won’t sag under the weight of the rolls. Avoid stretchy acrylic: the baskets will bulge and the straps will stretch.
- Emerald green: 200 g, about 220 m (baskets: bases and walls)
- Light tan: 90 g, about 99 m (rims, straps, wrapped knots)
These quantities include a margin of about 20% for gauge swatches and differences in tension.
Tools:
– 5.0 mm (H-8) crochet hook
– 4 wooden rings, 1.5 in (3.8 cm) across
– Stitch markers (at least 4)
– Large-eye tapestry needle
– Scissors
– Measuring tape
– Blocking pins and a towel
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet
- BLO – back loop only
- sk – skip
- sp – space
- st(s) – stitch(es)
- MR – magic ring
Special stitch: crab stitch (reverse sc). Work from left to right (right-handers). Insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops. This makes the twisted, rope-like top edge.
Shell: 5 dc in the same stitch.
Gauge and Checkpoints
Gauge: 12 sc and 12 rounds = 4 in (10.2 cm) in sc worked in the round.
Make one complete basket before you start the others. It is your real gauge test, because both the basket width and the strap fit depend on it.
Checkpoints:
– After Round 5 (30 sts): base is 3.25 in (8.3 cm) across.
– After Round 9 (54 sts): base is 5.75 in (14.6 cm) across.
– After Round 15: basket is 2.75 in (7.0 cm) tall, measured from the base edge.
– After Round 19: basket is 3.75 in (9.5 cm) tall.
If the base is too big: go down to a 4.5 mm hook. A loose base makes the walls floppy.
If the base is too small: go up to a 5.5 mm hook. Check that a roll will still fit; you need at least 0.5 in (1.3 cm) of clearance across.
If the base ruffles: your tension is loose for the increases. Change hooks rather than removing increases, because the wall pattern needs exactly 54 sts.
If the base cups: you are working too tightly. Go up half a hook size.

Basket (Make 4)
Base
Work in continuous rounds, joining each round with a sl st to the first sc. Ch 1 at the start of each round (does not count as a stitch).
Round 1: With green, make a MR and work 6 sc into it. Join. (6 sts)
Round 2: 2 sc in each st around. Join. (12 sts)
Round 3: Sc in next st, 2 sc in next st; repeat around. Join. (18 sts)
Round 4: Sc in next 2 sts, 2 sc in next st; repeat around. Join. (24 sts)
Round 5: Sc in next 3 sts, 2 sc in next st; repeat around. Join. (30 sts)
Checkpoint: 3.25 in (8.3 cm) across.
Round 6: Sc in next 2 sts, 2 sc in next st, sc in next 2 sts; repeat around. Join. (36 sts)
Round 7: Sc in next 5 sts, 2 sc in next st; repeat around. Join. (42 sts)
Round 8: Sc in next 3 sts, 2 sc in next st, sc in next 3 sts; repeat around. Join. (48 sts)
Round 9: Sc in next 7 sts, 2 sc in next st; repeat around. Join. (54 sts)
Rounds 6 and 8 move the increases to the middle of each section, so the base stays round instead of turning into a hexagon.
Checkpoint: 5.75 in (14.6 cm) across, lying flat.
Wall
Round 10 (turning round): Ch 1, sc in BLO of each st around. Join. (54 sts)
The unused front loops form a crisp ridge, and the fabric now turns upward into the wall.
Round 11: Ch 1, sc in each st around. Join. (54 sts)
These two rounds make the solid lower band. Checkpoint: the wall is 0.75 in (1.9 cm) tall.
Round 12 (shell round): Ch 1, sc in first st, sk 2 sts, shell in next st, sk 2 sts. Then work sc in next st, sk 2 sts, shell in next st, sk 2 sts 8 times. Join to the first sc.
Count: 9 sc + 9 shells of 5 dc = 9 + 45 = 54 sts.
Each 6-stitch repeat makes one fan. You now have 9 fans around the wall.
Round 13 (column round): Ch 4 (counts as tr). Then work ch 3, sc in 3rd (center) dc of next shell, ch 3, tr in next sc 8 times. Then ch 3, sc in center dc of last shell, ch 3. Join to the top of the beginning ch-4.
Count: 9 tr, 9 sc, 18 ch-3 sps.
The tr columns rise above each sc from the previous round. The chains drop to the tip of each fan, making a zigzag.
Round 14 (arch round): Ch 1, sc in the same st as the join. Then work ch 5, sk (ch-3 sp, sc, ch-3 sp), sc in next tr 8 times. Then ch 5 and join to the first sc.
Count: 9 sc, 9 ch-5 arches.
Each ch-5 arch spans the zigzag below it. The openings between the zigzag and the arch make the pointed windows.
Round 15 (conversion round): Ch 1. Work sc in next sc, 5 sc in next ch-5 arch 9 times. Join.
Count: 9 sts worked into existing sc + 45 sts worked into arches = 54 sts.
Fasten off the green and weave in the end. Checkpoint: the basket is 2.75 in (7.0 cm) tall.
Rim (Border)
The tan rim is the border of each basket. It stiffens the top edge and gives the straps a solid place to attach.
Border gauge: 12 sc = 4 in (10.2 cm) around, and 4 rounds = 1 in (2.5 cm) tall.
Round 16: Join tan in any st of Round 15. Ch 1, sc in each st around. Join. (54 sts)
Round 17: Ch 1, sc in each st around. Join. (54 sts)
Round 18: Ch 1, sc in each st around. Join. (54 sts)
Place a marker in the joining stitch (st 1) and another in st 28. These mark the two strap positions on opposite sides of the basket, 27 sts apart.
Round 19 (crab stitch): Ch 1, crab stitch in each st around. Join. (54 sts)
Fasten off and weave in the end.
Why the math works: The base ends at 54 sts, the wall pattern uses a 6-stitch repeat (9 x 6 = 54), and Round 15 converts the arches back to exactly 54 sts. Because the rim keeps the same count, the top of the basket stays the same width as the base. At 3 sts per inch, 54 sts = 18 in (45.7 cm) around, which matches the 5.75 in (14.6 cm) diameter. With no increases or decreases in the rim, the walls don’t flare or pull in, and the rolls slide in cleanly.
Strap (Make 2)
Strap gauge: 3 sl sts = 1 in (2.5 cm) along the cord.
Top ring: With tan, join the yarn around a wooden ring. Work 10 sc around the ring and join with a sl st.
Cord: Ch 73 from the ring. Starting in the 2nd ch from the hook, sl st into the back bump of each ch. (72 sl sts)
Checkpoint: the cord measures 24 in (61.0 cm), not counting the rings.
Bottom ring: Work 10 sc around a second wooden ring, sl st to the end of the cord, and fasten off. Leave a 10 in (25.4 cm) tail.
Pull the cord gently along its length so the slip stitches settle evenly.
Make All Pieces
- Baskets: 4 baskets in green, each with a tan rim
- Straps: 2 tan straps, each with 2 wooden rings
Layout (distances measured down from the top rings):
[top rings]
/ \
0 in ... 7 in (17.8 cm) V section
[ Basket 1 rim ] 7 in (17.8 cm)
[ Basket 2 rim ] 11.75 in (29.8 cm)
[ Basket 3 rim ] 16.5 in (41.9 cm)
[ Basket 4 rim ] 21.25 in (54.0 cm)
bottom rings 24 in (61.0 cm)
Basket 4 base 25 in (63.5 cm)
Each rim sits 4.75 in (12.1 cm) below the one above it. That is 3.75 in (9.5 cm) of basket plus a 1 in (2.5 cm) gap.
Joining
Method: Sew each strap flat to the outside of each rim, then add a wrapped knot above and below the rim.
- Lay the four baskets in a column. Turn each one so its markers point left and right.
- Lay one strap along the left markers. Line up the cord with the 7 in (17.8 cm), 11.75 in (29.8 cm), 16.5 in (41.9 cm) and 21.25 in (54.0 cm) points at the top edge of each rim. Pin in place.
- Using tan yarn and the tapestry needle, sew the cord to the rim through all four rim rounds (Rounds 16–19). Take one stitch into the cord for each rim round, so you make 4 stitches per rim.
- Just above the rim, wrap tan yarn tightly around the cord 4 times and knot it. Repeat just below the rim. This makes the knotted look and stops the basket from sliding on the cord.
- Sew the bottom ring flat to Basket 4 over Rounds 11–12.
- Repeat Steps 2–5 on the right side.
Tension: Sew firmly, but don’t pucker the rim. The cord should lie flat and straight between baskets, not twisted.
Size checkpoint: Hold the holder up by both top rings together. The baskets should hang level, 1 in (2.5 cm) apart. Basket 4’s base should sit 25 in (63.5 cm) below the rings.
Final Blocking
- Lightly mist each basket with water.
- Stuff each basket snugly with a towel or a roll wrapped in plastic, so the walls stand straight.
- Shape the windows with your fingers, opening each arch and pressing the fans flat.
- Press each base flat on a table.
- Let everything dry completely, for about 24 hours.
- Hang the holder by the rings for a few hours so the straps settle under their own weight.
Final Quality-Control Checklist
- Every basket has 54 sts in Rounds 9, 15 and 16–19.
- Each basket has 9 fans and 9 windows, evenly spaced.
- Each base measures 5.75 in (14.6 cm) and each basket is 3.75 in (9.5 cm) tall.
- Each strap measures 24 in (61.0 cm) between the rings.
- Each rim is attached at two opposite points, 27 sts apart.
- All four baskets hang level, 4.75 in (12.1 cm) apart rim to rim.
- All ends are woven in securely.
Troubleshooting
The wall flares outward: Your Round 13 tr stitches are too loose, or you added stitches in Round 15. Recount to 54 and keep the chains snug.
The wall pulls inward: Round 15 is tight. Work it more loosely, or use a hook half a size bigger for that round only.
The windows look uneven: Make sure each sc in Round 13 goes into the center (3rd) dc of a shell.
The baskets tilt: The strap points aren’t directly opposite each other. Re-sew them 27 sts apart.
The strap stretches: Slip-stitch cord can stretch with use. Tighten the wrapped knots, or work a second pass of sl sts along the back of the cord.
The roll won’t fit: The base is too small. Remake the basket with a bigger hook.
Care
Hand wash in cool water, reshape the baskets, and dry them flat with something inside to hold their shape. Don’t tumble dry or hang the holder while it’s wet.

Final Notes
Everything depends on one chain of measurements. The gauge of 12 sc = 4 in (10.2 cm) gives a 54-stitch base 5.75 in (14.6 cm) across. The 6-stitch repeat makes 9 fans and 9 windows. Round 15 converts back to 54 sts, and the rim adds 1 in (2.5 cm) for a 3.75 in (9.5 cm) basket. Each 24 in (61.0 cm) strap holds four baskets 4.75 in (12.1 cm) apart, for a holder 25 in (63.5 cm) long. If the first basket matches the checkpoints, the other three will too.
Happy crocheting!