Fern Braid Letter F Keychain Crochet Pattern

This little monogram charm is a capital “F” with a dark forest-green twisted rope running down every stroke, framed by a soft mint border. Three cream daisies with golden centers and a few sage leaves climb the stem. A gold keyring turns it into a bag charm, a key fob, or a quick personalized gift.

The palette is fresh and garden-inspired: deep green for the rope, pale mint for the frame, and cream, yellow, and sage for the flowers. The look is tidy and graphic, with the raised rope adding texture against the flat border.

This pattern uses US crochet terms. The finished letter measures 4.5 in (11.4 cm) tall and 2.9 in (7.4 cm) wide, not counting the hardware. Each stroke is 1.1 in (2.8 cm) wide.

Construction is simple. First you work a dark green rope core, which is one row of crossed double crochet. You make the stem, then add the top arm and middle arm straight onto it, so the core is one connected piece. Next, two rounds of mint single crochet go around the whole outline. Finally, you sew on three small flowers and five leaves and attach the keyring.

Finished Size and Construction

  • Finished size: 4.5 in x 2.9 in (11.4 cm x 7.4 cm)
  • Stroke width: 1.1 in (2.8 cm)
  • Skill level: Easy-intermediate (crossed stitches, working into chain undersides)
  • Terminology: US
  • Yarn weight: DK (#3) cotton for the letter; fingering (#1) cotton for appliqués
  • Hook: 3.5 mm (E-4) for the letter; 2.0 mm for appliqués
  • Number of pieces: 1 letter, plus 3 flower and 5 leaf appliqués
  • Layout: single letter, worn vertically from a keyring at the top-left corner
  • Core size (before border): 3.8 in (9.7 cm) tall x 2.2 in (5.6 cm) wide; core stroke 0.4 in (1.0 cm)
  • Border depth: 0.35 in (0.9 cm) per side, 2 rounds

Materials

Use a smooth mercerized or combed cotton. Cotton shows the crossed stitches crisply and holds a firm shape on a keyring. Avoid fuzzy or very stretchy yarns, because they blur the rope.

  • Color A, dark forest green (DK cotton): 4 g, 8 m
  • Color B, mint green (DK cotton): 5 g, 10 m
  • Color C, cream (fingering cotton): 2 g, 8 m
  • Color D, golden yellow (fingering cotton): 1 g, 3 m
  • Color E, sage green (fingering cotton): 1 g, 4 m

All quantities include a safety margin of about 20 percent.

Tools:

  • 3.5 mm (E-4) and 2.0 mm crochet hooks
  • Tapestry needle and a fine sewing needle
  • Gold split keyring, 1 in (2.5 cm) diameter, with a 1.5 in (3.8 cm) length of chain
  • Two 6 mm jump rings and two pairs of flat-nose pliers
  • Rust-proof pins, blocking mat, spray bottle
  • Optional: felt in mint, cut to the letter’s shape, for a stiffer back

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sc2tog: single crochet 2 together
  • sc3tog: single crochet 3 together
  • st(s): stitch(es)
  • RS: right side

Special stitch: Crossed Pair (CP). Skip the next chain. Work dc in the following chain. Then, working in front of the dc you just made, dc in the skipped chain. Each CP uses 2 chains and makes 2 dc. A row of CPs forms the slanted, twisted rope.

Base sts. On the stem, the 18 chains that carry dc are called base sts 1 to 18, counted from the bottom of the stem upward.

Gauge and Checkpoints

Gauge: 20 sc and 22 rows = 4 in (10.2 cm) in single crochet with Color B and the 3.5 mm hook. One CP row is 0.4 in (1.0 cm) tall, including the foundation chain.

Test first. Work the stem (below) before anything else and measure it. The stem is your gauge swatch.

Checkpoints:

  1. Stem: 3.8 in (9.7 cm) long and 0.4 in (1.0 cm) wide.
  2. Top arm added: total core width across the top is 2.2 in (5.6 cm). The arm reaches 1.8 in (4.6 cm) past the stem.
  3. Middle arm added: core width at the middle is 1.8 in (4.6 cm). The arm reaches 1.4 in (3.6 cm) past the stem.
  4. After Border Round 1: height 4.2 in (10.7 cm), stroke width 0.75 in (1.9 cm).
  5. After Border Round 2: 4.5 in x 2.9 in (11.4 cm x 7.4 cm).

If your stem is too long (over 4 in / 10.2 cm), go down to a 3.25 mm hook. If it is too short (under 3.6 in / 9.1 cm), go up to a 3.75 mm hook. Keep the same hook for the border so the border lies flat.

Crocheted green bag decorated with white daisies featuring yellow centers, with gold chain handle on wood.

Letter Core (Color A)

Stem

Using the 3.5 mm hook and Color A:

Ch 20. The first chain you make is base st 1, at the bottom of the stem.

Row 1: Skip the 2 chains nearest the hook. These are the turning chain and are not counted as a stitch. Work CP over the next 18 ch, 9 times in total. Fasten off. (18 dc)

The 2 skipped chains stay at the top of the stem as a small turning chain. Hold the stem so that:

  • the dc tops run up the left edge,
  • the chain undersides (base sts 1 to 18) run up the right edge,
  • the turning chain sits at the top.

Check Checkpoint 1.

Top Arm

Join Color A with a sl st in the underside of base st 18.

Ch 10. The chain runs to the right, level with the top of the stem.

Row 1: Skip the 2 chains nearest the hook (the turning chain at the arm tip). Work CP over the next 8 ch, 4 times in total, working back toward the stem. The dc should hang below the chain. (8 dc)

Sl st in the underside of base st 17 to anchor the lower edge of the arm. Fasten off.

The arm chains that carry dc are arm ch 1 to 8, numbered from the stem outward. Arm ch 9 is the base of the tip turning chain and arm ch 10 is its top. Check Checkpoint 2.

Middle Arm

Join Color A with a sl st in the underside of base st 10.

Ch 8.

Row 1: Skip the 2 chains nearest the hook. Work CP over the next 6 ch, 3 times in total. (6 dc)

Sl st in the underside of base st 9. Fasten off.

The middle-arm chains are ch 1 to 6 from the stem outward, with ch 7 and ch 8 forming the tip turning chain. Base sts 11 to 16 stay open between the arms, and base sts 1 to 8 stay open below the middle arm.

Check Checkpoint 3. Weave in all Color A tails along the backs of the dc. Don’t weave them along the outer edges, because you’ll be working into those.

Border (Color B)

Border gauge: each sc round adds about 0.18 in (0.5 cm) per side, so 2 rounds add 0.35 in (0.9 cm). Work with even tension and the RS facing.

Border Round 1

Join Color B at the bottom-left corner. Work clockwise:

  • 3 sc in the top of the bottom-most dc (bottom-left corner).
  • Sc in the next 17 dc tops up the left edge.
  • 3 sc in the top of the stem turning chain (top-left corner).
  • Sc in the underside of the turning chain’s base.
  • Sc in the underside of arm ch 1 to 8 (8 sc).
  • 3 sc in the underside of arm ch 9 (tip, top corner).
  • 3 sc in the top of the arm turning chain (tip, bottom corner).
  • Sc in the 8 arm dc tops.
  • Sc2tog over the sl-st join at base st 17 and base st 16 (inner corner).
  • Sc in base sts 15 to 11 (5 sc).
  • Sc2tog over base st 10 and middle-arm ch 1 (inner corner).
  • Sc in middle-arm ch 2 to 6 (5 sc).
  • 3 sc in middle-arm ch 7 (tip, top corner).
  • 3 sc in the top of the middle-arm turning chain (tip, bottom corner).
  • Sc in the 6 middle-arm dc tops.
  • Sc2tog over the sl-st join at base st 9 and base st 8 (inner corner).
  • Sc in base sts 7 to 2 (6 sc).
  • 3 sc in the underside of base st 1 (bottom-right corner).
  • Sl st to the first sc.

Total: 80 sts. The round has 7 outer corners of 3 sc each (21 sts), 3 sc2tog inner corners (3 sts), and 56 single sc along the edges. Check Checkpoint 4.

Border Round 2

Ch 1. Sc in each st around, with these changes:

  • In the center sc of each 3-sc corner group, work 3 sc.
  • At each inner corner, work sc3tog over the st before the sc2tog, the sc2tog itself, and the st after it.

Sl st to the first sc. Fasten off.

Count breakdown (going clockwise from the bottom-left corner):

Segment Stitches
Left edge 19 sc
Top edge 11 sc
Top arm tip 2 sc
Top arm underside 8 sc
Gap between arms 3 sc
Middle arm top 5 sc
Middle arm tip 2 sc
Middle arm underside 6 sc
Lower right edge 6 sc
Bottom 2 sc
Corners 7 corners x 3 sc
Inner corners 3 sc3tog

Total: 88 sts. As a conversion round, that is 64 sts worked one per existing st, plus 21 corner sc, plus 3 sc3tog.

Why the math works:

  • The 80 sts of Round 1 are the 7 corner centers, the 9 sts used up by the three sc3tog (3 each), and 64 sts that get 1 sc each.
  • Each outer corner gains 2 sts (14 in total) so the outer curves stay flat.
  • Each inner corner loses 2 sts (6 in total) so the notches between strokes don’t ruffle.
  • So 80 + 14 − 6 = 88. Every edge segment lines up with the core stitches under it, so the border matches the 3.8 in x 2.2 in (9.7 cm x 5.6 cm) core plus 0.35 in (0.9 cm) on every side. That gives 4.5 in x 2.9 in (11.4 cm x 7.4 cm).

Appliqués

Flowers (make 3)

Using the 2.0 mm hook and Color D:

Round 1: Make a magic ring and work 5 sc into it. Pull the ring closed and sl st to the first sc. Fasten off. (5 sc)

Round 2: Join Color C in any sc. In each sc, work (sl st, ch 2, 2 dc, ch 2, sl st). (5 petals)

Fasten off and leave a 10 in (25.4 cm) tail for sewing. Each flower is about 0.8 in (2.0 cm) across.

Leaves (make 5)

Using the 2.0 mm hook and Color E:

Ch 6. Working along the chain:

  • Sl st in the 2nd ch from the hook.
  • Sc in the next ch, hdc in the next ch, dc in the next ch, sc in the last ch.
  • Ch 1, then rotate the piece.
  • Working along the other side of the chain: sc in the first ch, dc in the next, hdc in the next, sc in the next, sl st in the last ch.

The result is a pointed leaf about 0.5 in (1.3 cm) long. Leave a 8 in (20.3 cm) tail.

Final Blocking

  1. Block the letter before sewing on the appliqués.
  2. Pin the letter face up on the mat. Set the stem to 4.5 in (11.4 cm), the top arm to 2.9 in (7.4 cm) across, and the middle arm to 2.5 in (6.4 cm) across.
  3. Square the corners with a ruler. Keep the inner notches sharp and the outer corners gently rounded.
  4. Mist evenly until damp, without soaking.
  5. Press the rope lightly with your fingertips so it stays raised and doesn’t flatten.
  6. Let it dry completely, at least 4 hours.
  7. Unpin and check the measurements again.

Assembly

  1. Place the flowers on the stem:
  2. one about 0.6 in (1.5 cm) below the top edge,
  3. one level with the middle arm,
  4. one about 0.6 in (1.5 cm) above the bottom edge.
  5. Sew each flower down through its center and petal bases, using small stitches hidden in the rope.
  6. Tuck the leaves under the petal edges:
  7. two at the top flower, one pointing toward the top arm and one down-left,
  8. one at the lower right of the middle flower,
  9. two at the bottom flower, at the upper right and lower right.
  10. Optional: glue or whipstitch mint felt to the back for extra stiffness.
  11. Open a jump ring with pliers. Pass it through the center sc of the top-left corner in Round 2, link on the chain, and close it. Use the second jump ring to join the chain to the keyring.

Final Quality-Control Checklist

  • Stem is 4.5 in (11.4 cm) tall and the top arm is 2.9 in (7.4 cm) wide.
  • All strokes are an even 1.1 in (2.8 cm) wide.
  • Border Round 2 counts 88 sts.
  • The rope slants consistently and shows no gaps.
  • Inner corners are crisp, with no ruffling.
  • Flowers and leaves are secure and centered on the stem.
  • Jump rings are fully closed, with no gap that could catch yarn.
  • All tails are woven in and trimmed.

Troubleshooting

Rope looks loose or gappy: Tighten your dc slightly, or drop to a 3.25 mm hook for the core only.

Border ruffles on outer corners: You probably worked 3 sc into more than one stitch per corner. Recount against the Round 1 list.

Inner corners bunch up: Make sure you worked the sc2tog in Round 1 and the sc3tog in Round 2.

Arms droop or tilt: Check that each arm’s anchoring sl st went into the correct base st (17 for the top arm, 9 for the middle arm).

Letter curls: Block again with a little more moisture, or add the felt backing.

Flowers look flat: Pull the petal ch-2s snug and shape each petal with your fingers before sewing.

Care

Spot clean with mild soap and cool water, then reshape and let it dry flat. Remove the keyring before washing so the metal doesn’t tarnish or snag the stitches.

A green crocheted F keychain adorned with daisy flowers hangs from a tan leather handbag in a bright patio setting.

Final Notes

The measurement chain is short and reliable:

  1. The 18-dc stem gives a 3.8 in (9.7 cm) core.
  2. The arms bring the core to 2.2 in (5.6 cm) wide.
  3. Border Round 1 has 80 sts and Round 2 has 88 sts. Together they add 0.35 in (0.9 cm) on every side.
  4. The finished letter is 4.5 in x 2.9 in (11.4 cm x 7.4 cm).

Check each stage against its checkpoint and the charm will come out the right size. Happy crocheting!

Leave a Comment