Hattie Hen is a farmhouse-style plastic bag holder. She has a tall, egg-shaped body in cream pineapple lace and a round cream head with black eyes. Her comb, wattles, and bow are burgundy, and her beak is orange. She has layered beige feather wings and a cream shell-fan tail.
You load bags through the top, where the head lifts like a lid, and pull them out one at a time from the round burgundy-rimmed opening at the bottom. Because the body is lace, you can see how full she is.
This pattern uses US crochet terms. Hattie is 15.75 in (40.0 cm) tall without the loop and 21.75 in (55.2 cm) with it. The body is 10 in (25.4 cm) wide at its widest point when laid flat.
The body is worked in joined rounds from the bottom opening up: burgundy base rounds, then three tiers of pineapple lace, then a single crochet neck. The head is a dome-shaped cap. The small pieces are made separately and sewn on. A burgundy crab-stitch border finishes the opening.
Finished Size and Construction
- Finished size: 15.75 in (40.0 cm) tall without the loop; 21.75 in (55.2 cm) with the loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 11 (body, head, comb, beak, 2 wattles, bow, 2 wings, tail, hanging loop)
- Layout: Head over the neck, wings on the sides, tail at the upper back, bow at the front of the neck
- Body size: 11.75 in (29.8 cm) tall, 10 in (25.4 cm) wide flat
- Size before border: opening is 3.1 in (7.9 cm) across
- Border depth: 0.4 in (1.0 cm)
Materials
Use a smooth, combed or mercerized DK cotton. It keeps the lace crisp and helps the head hold its shape. The amounts below assume about 120 m per 50 g.
- Cream: 175 g / 420 m (body, head, tail, loop)
- Light beige: 30 g / 72 m (wings)
- Burgundy: 25 g / 60 m (base, border, comb, wattles, bow)
- Orange: 5 g / 12 m (beak)
These quantities include a margin of about 15%.
Tools: 3.5 mm (E-4) hook, two 10 mm black safety eyes, tapestry needle, stitch markers, pins, scissors, blocking mat, spray bottle, and a balloon or rolled towel.
Abbreviations (US Terms)
- ch chain; sl st slip stitch; sc single crochet; hdc half double crochet; dc double crochet; tr treble crochet
- sc2tog / sc3tog single crochet 2 / 3 together; MR magic ring; sp space; lp loop; rep repeat; st(s) stitch(es)
- V-st: (dc, ch 2, dc) in the same st or sp
- Shell: (2 dc, ch 2, 2 dc) in the same sp
- Fan: tr sts with ch 1 between them, all worked in one st or sp (the number of tr is given in each round)
- Reverse sc (crab stitch): Work from left to right. Insert the hook in the next st to the right, yo, pull up a lp, yo, and pull through both lps.
Gauge and Checkpoints
Gauge: 20 sc and 22 rounds = 4 in (10.2 cm). One 12-st lace repeat at Rnd 6 = 2.4 in (6.1 cm) wide. Tier 1 (6 rounds) = 3 in (7.6 cm) tall.
Make the head first as your test piece. After Rnd 9 it should measure 3.4 in (8.6 cm) across.
Body checkpoints (measured up the side from the opening edge):
- After Rnd 5: opening is 3.1 in (7.9 cm) across; outer edge is 19.2 in (48.8 cm) around
- After Rnd 11: 4 in (10.2 cm)
- After Rnd 19: 8.25 in (21.0 cm); flat width is 10 in (25.4 cm)
- After Rnd 25: 11 in (27.9 cm)
- After Rnd 29: 11.75 in (29.8 cm); neck is 4.8 in (12.2 cm) wide flat
If your piece comes out too big, go down 0.5 mm in hook size. If it’s too small, go up 0.5 mm. Don’t change the stitch counts, because the lace depends on 96 base stitches.

Body
Base (Burgundy)
Foundation: Ch 48. Join with a sl st to the first ch without twisting.
Rnd 1: Ch 1, sc in each ch, join. (48 sc)
Rnd 2: Ch 1, (sc in next 2 sts, 2 sc in next st) 16 times, join. (64 sc)
Rnd 3: Ch 1, (sc in next 3 sts, 2 sc in next st) 16 times, join. (80 sc)
Rnd 4: Ch 1, (sc in next 4 sts, 2 sc in next st) 16 times, join. (96 sc)
Rnd 5: Ch 1, sc in each st, join. (96 sc) Fasten off burgundy. The base should cup gently around the opening.
Tier 1 (Cream)
Rnd 6: Join cream in any st. Ch 5 (counts as dc + ch 2), dc in same st (first V-st made), ch 2, sk 5 sts, fan of 7 tr in next st, ch 2, sk 5 sts. *V-st in next st, ch 2, sk 5 sts, fan of 7 tr in next st, ch 2, sk 5 sts; rep from * 6 more times. Join to the 3rd ch of the beginning ch-5. (8 V-sts and 8 fans; each fan has 6 ch-1 sps; each repeat uses 12 sts)
Rnd 7: Sl st into the V-st sp, ch 3 (counts as dc), (dc, ch 2, 2 dc) in same sp, ch 2, sc in first ch-1 sp of fan, (ch 3, sc in next ch-1 sp) 5 times, ch 2. *Shell in next V-st sp, ch 2, work the pineapple as before, ch 2; rep from * around, join. (8 shells; 5 ch-3 lps per pineapple = 40 lps)
Rnd 8: Sl st to the shell sp and work a shell in it, ch 2, sc in first ch-3 lp, (ch 3, sc in next lp) 4 times, ch 2. Rep around, working a shell in each shell, join. (4 lps per pineapple = 32 lps)
Rnds 9–11: Work the same way, but ch 3 on each side of the pineapple instead of ch 2. Each round has one fewer lp per pineapple. (Rnd 9: 24 lps; Rnd 10: 16 lps; Rnd 11: 8 lps, one per pineapple)
Tier 2 (Widest Section)
Rnd 12: Sl st to the shell sp, ch 4 (counts as tr), (ch 1, tr) 8 times in same sp (fan of 9 tr), ch 3, V-st in the single ch-3 lp at the pineapple tip, ch 3. *Fan of 9 tr in next shell sp, ch 3, V-st in tip lp, ch 3; rep from * around, join. (8 fans with 8 ch-1 sps each; 8 V-sts) This places the new pineapples above the old shell columns, so the pattern staggers.
Rnd 13: Sl st into first ch-1 sp of the fan, ch 1, sc in same sp, (ch 3, sc in next ch-1 sp) 7 times, ch 3, shell in V-st sp, ch 3. Rep around, join. (7 lps per pineapple = 56 lps; 8 shells)
Rnds 14–16: Continue the pineapples, working a shell in each shell, with ch 3 at the sides. (Rnd 14: 48 lps; Rnd 15: 40; Rnd 16: 32)
Rnds 17–19: Work the same way, but with ch 2 at the sides. (Rnd 17: 24 lps; Rnd 18: 16; Rnd 19: 8)
Tier 3 (Shoulders)
Rnd 20: In each shell sp, work a fan of 7 tr, then ch 2, V-st in the tip lp, ch 2. Rep around, join. (8 fans with 6 ch-1 sps each; 8 V-sts)
Rnd 21: Sc in first ch-1 sp of the fan, (ch 3, sc in next ch-1 sp) 5 times, ch 1, V-st in V-st sp, ch 1. Rep around, join. (40 lps; 8 V-sts) From this round on, work V-sts instead of shells. This narrows the shoulders.
Rnds 22–24: Continue the pineapples with ch 1 at the sides. (Rnd 22: 32 lps; Rnd 23: 24; Rnd 24: 16)
Rnd 25: *V-st in V-st sp, ch 1, sc2tog across the 2 remaining ch-3 lps, ch 1; rep from * around, join.
Neck
Rnd 26: Ch 1. *Sc in dc, sc in ch-2 sp, sc in dc, sc in ch-1 sp, sc in sc2tog, sc in ch-1 sp; rep from * 7 more times, join. (6 sc × 8 = 48 sc)
Rnds 27–29: Ch 1, sc in each st, join. (48 sc) Fasten off.
Head (Cream)
Rnd 1: 6 sc in MR. (6)
Rnds 2–9: Increase 6 sts evenly in each round. (Rnd 2: 12; Rnd 3: 18; Rnd 4: 24; Rnd 5: 30; Rnd 6: 36; Rnd 7: 42; Rnd 8: 48; Rnd 9: 54)
Rnds 10–21: Sc in each st. (54 sc) Fasten off.
The head is 3.75 in (9.5 cm) tall and 5.4 in (13.7 cm) wide flat. Insert the safety eyes between Rnds 12 and 13, 8 sts apart. Leave the head open and unstuffed.
Small Pieces
Comb (burgundy): Ch 8.
– Row 1: Sc in 2nd ch from hook and in each ch across, turn. (7 sc)
– Row 2: Ch 1, sc in first st, 6 dc in next st, sc in next st, 7 tr in next st, sc in next st, 6 dc in next st, sc in last st. (4 sc + 19 tall sts = 23 sts)
The comb is 1.75 in (4.4 cm) wide and 1 in (2.5 cm) tall.
Beak (orange): Ch 6.
– Row 1: Sc in 2nd ch from hook and in each ch across, turn. (5)
– Row 2: Ch 1, sc2tog, sc, sc2tog, turn. (3)
– Row 3: Ch 1, sc3tog. (1)
The beak is 1 in (2.5 cm) wide and 0.75 in (1.9 cm) tall.
Wattles (burgundy, make 2): Ch 4. Starting in the 2nd ch from hook, work sc, hdc, dc, then 5 dc in the last ch. Working along the other side of the chain, work dc, hdc, sc, sl st. (11 sts) Each teardrop is 1 in (2.5 cm) long.
Bow (burgundy):
– Band: Ch 26 and join into a ring. Rnds 1–2: sc in each st. (26 sc) Flattened, the band is 2.6 in (6.6 cm) wide.
– Tails: Ch 13. Rows 1–2: 12 sc. Fold into an upside-down V that is 2.4 in (6.1 cm) long.
– Center: Ch 6. Rows 1–2: 5 sc.
Pinch the band over the tails, wrap the center strip around both, and sew it at the back.
Wings (beige, make 2): Each wing is made from 4 scallop strips. Each strip is worked as follows, using the k value given below:
– Ch (4k + 2).
– Row 1: Sc in 2nd ch from hook and in each ch across. (4k + 1 sc)
– Row 2: Ch 1, sc in each st across.
– Row 3: Ch 1, sc in first st, *sk 1, 5 dc in next st, sk 1, sc in next st; rep from * k times. (6k + 1 sts)
The four strips are:
– Strip A: k = 6; ch 26; 6 scallops; 5 in (12.7 cm) wide
– Strip B: k = 5; ch 22; 5 scallops; 4.2 in (10.7 cm) wide
– Strip C: k = 4; ch 18; 4 scallops; 3.4 in (8.6 cm) wide
– Strip D: k = 3; ch 14; 3 scallops; 2.6 in (6.6 cm) wide
Stack the strips centered on each other with the scallops pointing down. Tuck each smaller strip behind the scallops of the strip above it so 0.75 in (1.9 cm) shows, then sew. Each wing is 3.25 in (8.3 cm) tall.
Tail (cream): Start with an MR.
– Row 1: Ch 3 (counts as dc), 5 dc in ring, turn. (6)
– Row 2: Ch 3, dc in same st, 2 dc in each of next 4 sts, dc in last st, turn. (11)
– Row 3: Ch 1, sc in first st, *9 tr in next st, sc in next st; rep from * 4 more times. (6 sc + 45 tr = 51 sts)
– Row 4: Ch 1, sc in each st, working 2 sc in the 5th tr of each petal. (51 + 5 = 56 sc)
The fan is 3.5 in (8.9 cm) wide and 3 in (7.6 cm) tall.
Hanging loop (cream): Ch 61, then sl st in the back bump of the 2nd ch from hook and of each ch across. (60 sl st; 12 in / 30.5 cm) Fold it in half to make a 6 in (15.2 cm) loop.
Make All Pieces
- Cream: body (1), head (1), tail (1), loop (1)
- Beige: wings (2, made from 8 strips in total)
- Burgundy: comb (1), wattles (2), bow (1); the base and border are part of the body
- Orange: beak (1)
[ loop ]
[ comb ]
[ head + eyes ]
[ beak ]
[wattle x2]
[ bow at neck ]
[wing] [ lace body ] [wing] (tail behind, upper right)
[ burgundy base ]
( bag opening )
Joining
Whipstitch the pieces together with matching yarn through the back loops.
- Head: Slide the head 0.75 in (1.9 cm) down over the neck. Sew only the back half, joining 27 head sts to 24 neck sts. Work this as 3 groups of 9 head sts to 8 neck sts, catching 2 head sts in one neck st once per group. The front of the head stays free, so you can lift it like a lid to load bags.
- Face: Sew the comb over Rnds 1–4 of the head. Sew the beak between the eyes at Rnds 14–15. Sew the wattles side by side just under the beak.
- Bow: Sew it at center front on Rnd 27.
- Wings: Sew the top edge of Strip A diagonally from Rnd 25 down to Rnd 15. Leave the scallops free.
- Tail: Sew it at the back right on Rnds 22–24, so the petals show above the wing.
- Loop: Sew both ends to the back of the head at Rnds 3–4.
Keep your tension snug but don’t let it pucker the lace. Checkpoint: Hattie should be 15.75 in (40.0 cm) from the opening to the top of the comb.
Border (Bag Opening)
Border gauge: 5 sc per inch (2.5 cm), the same as the body.
Rnd 1: Join burgundy in any free loop of the foundation ch. Ch 1, sc in each of the 48 free loops, join. (48 sc; 12 per quarter)
Rnd 2: Ch 1, reverse sc in each st, join. (48 sts; 12 per quarter) Fasten off.
Why the math works: One stitch in each of the 48 foundation chains keeps the opening at 9.6 in (24.4 cm) around, so it doesn’t ruffle or pull in. The crab stitch makes a firm rolled edge 0.4 in (1.0 cm) deep. This brings the inner opening to about 2.75 in (7.0 cm), which is snug enough to hold each bag until you pull it.
Final Blocking
- Weave in all ends.
- Mist the body until it is damp, not soaked.
- Put a balloon inflated to 10 in (25.4 cm) wide, or a rolled towel, inside the body.
- Use your fingers to open the pineapples and straighten the columns so they run straight up.
- Pin the wings and tail flat and open every scallop and petal.
- Shape the comb and the bow loops by hand.
- Let everything dry completely before you remove the balloon.
Final Quality-Control Checklist
- Base has 96 sts, and each tier has 8 pineapples
- Neck has 48 sc, and the head has 54 sc
- Body is 11.75 in (29.8 cm) tall and 10 in (25.4 cm) wide flat
- Head lifts at the front and is secure at the back
- Wings are placed evenly on both sides, and the scallops lie flat
- Border has 48 sts and doesn’t flare
- Loop is sewn on firmly
Troubleshooting
- Columns spiral: Join every round instead of working in a spiral.
- Pineapples lean: Recount Rnd 6. There should be exactly 5 skipped sts on each side of every fan.
- Body is too narrow: Tier 2 needs ch 3 at the sides.
- Head won’t fit over the neck: Make the head again with a hook 0.5 mm larger.
- Opening ruffles: Redo Border Rnd 1 with exactly 48 sts.
- Bags fall out: Work the crab stitch with a hook 0.5 mm smaller.
Care
Hand wash in cool water, roll in a towel to remove water, and reshape over a balloon to dry. Do not tumble dry.

Final Notes
Here is how the measurements build on each other. A gauge of 20 sc = 4 in (10.2 cm) gives a 48-st opening of 3.1 in (7.9 cm). That grows to a 96-st base. Three lace tiers bring the body to 11 in (27.9 cm), and the 48-st neck finishes it at 11.75 in (29.8 cm). The head overlaps the neck by 0.75 in (1.9 cm), so the finished hen is 15.75 in (40.0 cm) tall, or 21.75 in (55.2 cm) with the loop. For a different look, try a light beige body.
Happy crocheting!