This hanging basket holds two spare toilet paper rolls side by side. It hooks over a towel bar or a wall-mounted rod. The base is solid lavender and oval. The walls are an open cream lattice with small lavender knots at every crossing, and a scalloped cream shell edge runs around the top. It looks light, but the base and straps are firm enough to carry the rolls.
The two colors are soft lavender and warm cream. Lavender is used for the base, the low solid rim, the straps and the small knots. Cream is used for the Solomon’s knot lattice and the top border. The style is cottage-bathroom: airy, tidy and a little vintage.
This pattern uses US crochet terms. The finished basket is 10 in (25.4 cm) long, 5 in (12.7 cm) wide and 4.4 in (11.2 cm) tall. Before you attach them, each strap is 1.5 in (3.8 cm) wide and 20 in (50.8 cm) long.
You work the base as a joined oval in single crochet. Then you turn it up into a short rim and work three rounds of Solomon’s knot mesh. A solid band and a round of shells close the top. Last, you make two straps, sew them inside the rim and tie lavender knots at the lattice crossings.
Finished Size and Construction
- Finished size: 10 in (25.4 cm) long x 5 in (12.7 cm) wide x 4.4 in (11.2 cm) tall
- Skill level: Intermediate (Solomon’s knot)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (US G-6)
- Number of pieces: 3 (1 basket body, 2 straps)
- Layout: The straps are 5 in (12.7 cm) apart. Each one loops from the front rim, over the bar, to the back rim.
- Piece size: Body 10 x 5 x 4.4 in (25.4 x 12.7 x 11.2 cm); each strap 1.5 x 20 in (3.8 x 50.8 cm)
- Size before border: Walls 3.4 in (8.6 cm) tall, 27 in (68.6 cm) around the top
- Border depth: 1 in (2.5 cm)
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton holds its shape, handles a damp bathroom and shows the Solomon’s knots clearly. Avoid fuzzy or very stretchy yarn, because it makes the mesh sag.
- Lavender: 70 g, about 120 m (base, rim, straps, knots)
- Cream: 35 g, about 60 m (lattice and border)
These amounts include about 20 percent extra for swatching and tails.
Tools
– 4.0 mm (US G-6) crochet hook
– 4 locking stitch markers
– Tapestry needle
– Scissors
– Ruler or tape measure
– Spray bottle for blocking
– Optional: a piece of plastic canvas to stiffen the base
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- dtr – double treble crochet
- BLO – back loop only
- st(s) – stitch(es)
- sp – space
- inc – 2 sc in the same st
- SK – Solomon’s knot
Solomon’s knot (SK):
1. Pull up the loop on your hook to 0.75 in (1.9 cm).
2. Yarn over and pull through the long loop.
3. Insert the hook under the single back strand of the long loop. Yarn over and pull through.
4. Yarn over and pull through both loops. This is an sc into the back strand, and it completes one knot.
“Make 2 SK” means two knots in a row. The knot between them is the center knot of the arch.
Gauge and Checkpoints
Gauge: 16 sc x 17 rounds = 4 in (10.2 cm), worked in joined rounds of sc.
Use the base as your swatch. Work Rounds 1–6, then stop and measure.
- After Round 6 (76 sts): 7.6 in (19.3 cm) long x 2.6 in (6.6 cm) wide
- After Round 11 (106 sts): 10 in (25.4 cm) long x 5 in (12.7 cm) wide, lying flat
- After Round 14 (108 sts): Rim is 0.7 in (1.8 cm) tall
- After Mesh Round 3: Walls are 3.4 in (8.6 cm) tall from the base fold
- After the border: Walls are 4.4 in (11.2 cm) tall
If the base is too big, change to a 3.75 mm (US F-5) hook. If it is too small, change to a 4.5 mm (US 7) hook.
If the mesh walls come out too short, pull each SK to 0.85 in (2.2 cm). If they are too tall, pull each SK to 0.65 in (1.7 cm). Keep every knot the same length.

Oval Base (Lavender)
All rounds are joined. The ch 1 at the start of each round does not count as a st.
Round 1: Ch 22. Sc in 2nd ch from hook and in next 19 ch, then 3 sc in last ch. Rotate to work along the other side of the chain. Sc in next 19 ch, then 2 sc in the same ch as the first sc. Sl st to first sc. (46 sts)
From here on, each round has two straight sides of 20 sts and two curved ends. Only the curved ends get increases.
Round 2: Ch 1, inc in first st, sc in next 20 sts, inc in each of next 3 sts, sc in next 20 sts, inc in each of last 2 sts. Sl st to first sc. (52 sts)
Round 3: Ch 1, [sc in next st, inc] once, sc in next 20 sts, [sc in next st, inc] 3 times, sc in next 20 sts, [sc in next st, inc] 2 times. Sl st to first sc. (58 sts)
Rounds 4–11: Ch 1, [sc in next X sts, inc] once, sc in next 20 sts, [sc in next X sts, inc] 3 times, sc in next 20 sts, [sc in next X sts, inc] 2 times. Sl st to first sc. X is the round number minus 2.
- Round 4 (X = 2): 64 sts
- Round 5 (X = 3): 70 sts
- Round 6 (X = 4): 76 sts
- Round 7 (X = 5): 82 sts
- Round 8 (X = 6): 88 sts
- Round 9 (X = 7): 94 sts
- Round 10 (X = 8): 100 sts
- Round 11 (X = 9): 106 sts
Each round has 6 incs, so it is 6 sts more than the round before. After Round 11, each curved end has 33 sts and each straight side has 20 sts: 33 + 20 + 33 + 20 = 106.
If you want a plastic canvas insert, trace the finished base onto the canvas now. Cut it 0.25 in (0.6 cm) smaller all around.
Rim (Lavender)
Round 12: Ch 1, sc in BLO of each st around. Sl st to first sc. (106 sts) This round makes the fold where the base turns up.
Round 13: Ch 1, sc in each st around. Sl st to first sc. (106 sts)
Fold the basket flat and put a marker in the st at the tip of each curved end.
Round 14 (trim round): Ch 1, sc in each st around, working 2 sc in each marked st. Sl st to first sc. (106 + 2 = 108 sts)
Fasten off the lavender. The rim is 0.7 in (1.8 cm) tall. Its 108 sts divide into 27 groups of 4, which is what the lattice needs.
Lattice Walls (Cream)
Mesh Round 1: Join cream with an sc in any st at the center back. Make 2 SK, skip 3 sts, sc in next st. Repeat from * 25 more times. Make 1 SK, then dtr in the first sc. (27 arches)
The last SK and the dtr together make the 27th arch. The dtr also leaves your hook at the top of that arch, ready for the next round.
Mesh Round 2: Ch 1, sc in top of dtr. Make 2 SK, sc in center knot of next arch. Repeat from * 25 more times. Make 1 SK, then dtr in the first sc. (27 arches)
Each new arch runs from one center knot to the next, which closes the diamonds.
Mesh Round 3: Repeat Mesh Round 2. (27 arches)
Don’t fasten off. The walls should now be 3.4 in (8.6 cm) tall from the base fold: 0.7 in (1.8 cm) of rim plus three mesh rounds of 0.9 in (2.3 cm) each.
Border (Cream)
Border gauge: 4 sc = 1 in (2.5 cm), the same as the base. One shell repeat is 6 sts, or 1.5 in (3.8 cm).
Border Round 1: Ch 1, sc in top of dtr. Ch 3, sc in center knot of next arch. Repeat from * 25 more times. Ch 3, sl st to first sc. (27 sc + 27 ch-3 sps = 108 sts)
Border Round 2 (conversion round): Ch 1. Sc in each sc, and work 3 sc in each ch-3 sp. Sl st to first sc. (27 sts worked 1-per-sc + 81 sts worked into spaces = 108 sts)
Border Round 3: Ch 1, sc in next st, skip 2 sts, 5 dc in next st, skip 2 sts. Repeat from * 17 more times. Sl st to first sc. (18 shells, 108 sts)
Split into halves, the front of the top edge has 54 sts (9 shells) and the back has 54 sts (9 shells).
Why the math works:
– The rim has 108 sts. Mesh Round 1 uses 4 sts per arch, so 108 / 4 = 27 arches.
– Every later mesh round keeps the same 27 anchors.
– Border Round 1 gives each arch 1 sc plus 3 ch. That is 4 sts per arch again, so the top also has 108 sts.
– 108 / 6 = 18, so the shells fit exactly.
– The top edge is 108 / 4 = 27 in (68.6 cm) around, the same as the rim, so the walls stand straight.
Fasten off and weave in the ends.
Make All Pieces
- Basket body: 1 (lavender base and rim, cream lattice and border)
- Straps: 2 (lavender)
- Lavender knots: 81 (27 per mesh round x 3 rounds)
Strap (make 2)
Row 1: With lavender, ch 7. Sc in 2nd ch from hook and in each ch across. (6 sts)
Rows 2–85: Ch 1, turn, sc in each st across. (6 sts)
Fasten off and leave a 16 in (40.6 cm) tail. The strap measures 1.5 x 20 in (3.8 x 50.8 cm).
Layout (top view, front at the bottom):
back rim
[strap A] [strap B]
( ------ basket ------ )
[strap A] [strap B]
front rim
Center each strap 2.5 in (6.4 cm) in from the tip of its curved end. This puts the two straps 5 in (12.7 cm) apart.
Joining
Method: Whipstitch, using the strap tail on a tapestry needle.
Stitch-to-stitch logic: Lay 1 in (2.5 cm) of the strap end against the inside of the wall so it covers Border Rounds 1–3. The 6 strap sts sit over 6 border sts. Whipstitch along both long edges and across the bottom edge of the strap. Each stitch goes through one strap st and one border st. Sew the front end first. Then loop the strap over the bar and sew the other end to the back wall, directly opposite. Before you sew the second end, check that the strap is not twisted.
Tension: Pull each stitch snug, but don’t let the border pucker. The shells should still lie open after sewing.
Size checkpoint: With 1 in (2.5 cm) sewn at each end, 18 in (45.7 cm) of each strap stays free. A 1 in (2.5 cm) bar uses about 3.5 in (8.9 cm) of that, so the top of the basket hangs about 7 in (17.8 cm) below the bar. To change the drop, add or remove 4 rows for every 1 in (2.5 cm).
Lavender Knots
Cut 81 lengths of lavender, each 8 in (20.3 cm) long. Work one length at each center knot of Mesh Rounds 1, 2 and 3:
1. Wrap the length tightly around the crossing 4 times.
2. Tie a square knot on the inside of the basket.
3. Trim the tails to 0.25 in (0.6 cm).
The 27 knots on Mesh Round 3 sit just below the cream border.
Final Blocking
- Weave in all remaining ends on the inside.
- If you’re using the plastic canvas insert, place it in the bottom.
- Fill the basket with two toilet paper rolls, or a box about 9.5 x 4.75 in (24.1 x 12.1 cm), so the walls stand up.
- Mist the whole basket until it is damp but not soaked.
- Pat the lattice so all the diamonds are the same size and the knots line up in straight columns.
- Open each shell with your fingers.
- Smooth the straps flat to 1.5 in (3.8 cm) wide.
- Let everything dry completely, for at least 24 hours, before you hang it.
Final Quality-Control Checklist
- The base measures 10 x 5 in (25.4 x 12.7 cm) and lies flat.
- The rim is 0.7 in (1.8 cm) tall with a clean fold line.
- Each of the 3 mesh rounds has 27 arches.
- All SK loops are the same length.
- All 81 lavender knots are wrapped and tied on the inside.
- Border Round 2 has 108 sts, and Border Round 3 has 18 shells.
- The walls are 4.4 in (11.2 cm) tall and straight.
- The straps are 5 in (12.7 cm) apart, untwisted and sewn securely.
Troubleshooting
The base ruffles or cups: Your increase count is off. Recount: there should be exactly 6 incs per round, worked only on the curved ends.
The mesh leans or spirals: You missed an arch. Count 27 anchors before you close each round.
The diamonds are uneven: Your SK lengths vary. Check a few knots against a ruler as you go.
The shells don’t fit: Border Round 2 is off. Recount to 108 sts.
The basket tips forward: The strap ends are not directly opposite each other. Re-sew one end so they line up.
The straps stretch: Cotton relaxes over time. Remove 4 rows from each strap, or add a second line of whipstitches.
Care
Hand wash in cool water with mild soap. Lay flat to dry, reshaped over two rolls, and don’t hang it while it is wet.

Final Notes
Here is how the measurements connect. A gauge of 16 sc = 4 in (10.2 cm) gives a 10 x 5 in (25.4 x 12.7 cm) base with 106 sts. One trim round brings that to 108 sts, which makes 27 lattice arches of 4 sts each. Border Round 1 puts 4 sts back over each arch, for 108 sts again. Then 18 shells of 6 sts finish the top at 27 in (68.6 cm) around. Two 20 in (50.8 cm) straps hang the basket about 7 in (17.8 cm) below the bar.
If you check your counts at each stage, the walls will come out straight and even, ready to hold your spare rolls.
Happy crocheting!