This hanging basket holds one spare toilet paper roll and hangs from a wall hook on a natural wooden ring. The body is made in cream cotton. It has a solid round base, a short solid band, open diamond lattice sides and a scalloped shell rim. Four layered roses in lavender and lilac sit around the lattice.
The look is soft and slightly vintage, which suits a bathroom. Because the mesh is open, you can see how much paper is left.
This pattern uses US crochet terms. The finished basket is 5.1 in (13.0 cm) across the base and 16 in (40.6 cm) around. It is about 4.5 in (11.4 cm) tall to the tips of the scallops. Each rose is 2.75 in (7.0 cm) across.
You work the body in one piece in joined rounds, starting at the center of the base and working upward. Then you make two straps and four roses, each rose in two parts. Sew the roses to the lattice and the straps inside the rim. Finish by working the scalloped border and attaching the straps to the ring.
Finished Size and Construction
- Finished size: 5.1 in (13.0 cm) base diameter, 16 in (40.6 cm) around, 4.5 in (11.4 cm) tall
- Skill level: Easy intermediate
- Terminology: US
- Yarn weight: DK / light (3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 11 (1 basket body, 2 straps, 4 rose centers, 4 rose backings)
- Layout: 4 roses evenly spaced around the lattice, with 2 straps on opposite sides between roses
- Rose size: 2.75 in (7.0 cm) across
- Body height before border: 3.95 in (10.0 cm)
- Border depth: 0.55 in (1.4 cm)
Materials
Use a smooth mercerized or combed cotton in DK weight. Cotton holds its shape, shows the lattice clearly and stands up to a humid bathroom. A yarn of about 115 m per 50 g is ideal.
- Cream: 100 g (230 m), for the body, border and straps
- Lavender: 20 g (46 m), for the rose centers
- Lilac (lighter than the lavender): 15 g (35 m), for the rose backings
Tools:
- 3.5 mm (E-4) crochet hook
- Wooden ring, 2.5 in (6.4 cm) outside diameter
- Tapestry needle
- Stitch marker
- Scissors
- Rust-proof pins
- Spray bottle
All quantities include a margin of about 15% for swatching and for differences between yarns.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- BLO – back loop only
- sp – space
- st(s) – stitch(es)
- rnd – round
- shell – 5 dc in the same stitch
Special stitch – V-st: Work 1 dc, ch 1 and 1 dc, all in the same stitch. The ch-1 space in the middle becomes the base of one rose petal.
Gauge and Checkpoints
Gauge: 18 dc and 9 rows = 4 in (10.2 cm). 18 sc and 20 rows = 4 in (10.2 cm).
Use the base of the body as your test piece. Measure it flat, without stretching.
- After Rnd 3 (36 dc): 2.55 in (6.5 cm) across
- After Rnd 6 (72 dc): 5.1 in (13.0 cm) across, 16 in (40.6 cm) around
- After Rnd 10: wall is 0.8 in (2.0 cm) tall
- After Rnd 15: wall is 3.55 in (9.0 cm) tall
- After Rnd 17: wall is 3.95 in (10.0 cm) tall
- After the border: wall is 4.5 in (11.4 cm) tall
If the base is too big, switch to a 3.25 mm hook. If it is too small, switch to a 3.75 mm hook. A standard roll is about 4.5 in (11.4 cm) wide, so the base must be at least 4.75 in (12.1 cm) across.
If the base ripples, your tension is loose, so go down a hook size. If it cups, go up a hook size.

Basket Body
Use cream. Join each round with a sl st to the first stitch, and do not turn. On dc rounds, the beginning ch 3 counts as 1 dc.
Base
Rnd 1: Make a magic ring. Ch 3, then work 11 dc into the ring and join. (12 dc)
Rnd 2: Ch 3, dc in the same st, then 2 dc in each st around and join. (24 dc)
Rnd 3: Ch 3, 2 dc in next st, dc in next st, 2 dc in next st, repeat from * around and join. (36 dc)
Rnd 4: Ch 3, dc in next st, 2 dc in next st, dc in next 2 sts, 2 dc in next st, repeat from * around and join. (48 dc)
Rnd 5: Ch 3, dc in next 2 sts, 2 dc in next st, dc in next 3 sts, 2 dc in next st, repeat from * around and join. (60 dc)
Rnd 6: Ch 3, dc in next 3 sts, 2 dc in next st, dc in next 4 sts, 2 dc in next st, repeat from * around and join. (72 dc)
Checkpoint: the base measures 5.1 in (13.0 cm) across.
Solid Band
Rnd 7: Ch 1, sc in BLO of each st around and join. (72 sc)
This round leaves a ridge of unused loops on the outside, and the wall turns up sharply along that ridge.
Rnds 8–10: Ch 1, sc in each st around and join. (72 sc)
Lattice
Rnd 11 (setup): Ch 1, sc in first st, ch 5, skip 3 sts, sc in next st, repeat from * 16 more times (17 repeats in all). Ch 5, skip the last 3 sts and join to the first sc. (18 ch-5 loops)
Each loop uses 4 stitches, so 18 loops use all 72 stitches.
Rnd 12: Sl st in the next 3 ch to reach the middle of the first loop. Ch 1, sc in the same loop, ch 5, sc in next loop, repeat from * 16 more times (17 repeats in all). Ch 5 and join to the first sc. (18 ch-5 loops)
Each new sc sits in the middle of a loop from the round below, which forms the diamonds.
Rnds 13–15: Repeat Rnd 12. (18 ch-5 loops in each round)
Checkpoint: the wall is 3.55 in (9.0 cm) tall. Each lattice round adds about 0.55 in (1.4 cm). Pull the lattice gently upward when you measure.
Top Band
Rnd 16 (conversion): Sl st in the next 3 ch. Ch 1, then work 4 sc in each ch-5 loop around, skipping the sc between loops, and join. (18 loops × 4 sc = 72 sc)
Rnd 17: Ch 1, sc in each st around and join. (72 sc)
Checkpoint: the wall is 3.95 in (10.0 cm) tall. Place a marker in the working loop and set the body aside.
Straps (Make 2)
Use cream.
Row 1: Ch 66, sc in 2nd ch from hook and in each ch across, then turn. (65 sc)
Rows 2–3: Ch 1, sc in each st across, then turn. (65 sc)
Fasten off, leaving a 12 in (30.5 cm) tail. Each strap is 14.4 in (36.6 cm) long and 0.6 in (1.5 cm) wide.
Bottom loop: Fold the last 1 in (2.5 cm) of the strap back on itself to make a small teardrop loop. Sew the end down flat.
Roses (Make 4)
Each rose is a rolled lavender center stacked on a lilac five-petal backing.
Rose Center
Use lavender.
Row 1: Ch 35, V-st in 5th ch from hook, skip 2 ch, V-st in next ch, repeat from * across, then turn. (11 V-sts)
Row 2: Ch 1. Work 5 dc in the ch-1 sp of the next V-st, sl st between V-sts, and repeat from * for 4 petals in all. Next, work 7 dc in the ch-1 sp of the next V-st, sl st between V-sts, and repeat from * for 6 petals in all. Finish with 7 dc in the last V-st, then sl st in the last dc. (11 petals: 4 small, 7 large; 69 dc)
Fasten off, leaving a 10 in (25.4 cm) tail. Start at the small-petal end and roll the strip into a spiral with the petals facing up. Sew through all the layers at the base. The center is about 2 in (5.1 cm) across.
Rose Backing
Use lilac.
Rnd 1: Make a magic ring. Ch 1, then work 10 sc into the ring and join. (10 sc)
Rnd 2: Ch 1, sc in first st, ch 3, skip 1 st, sc in next st, repeat from * 3 more times (4 repeats in all). Ch 3, skip the last st and join. (5 ch-3 loops)
Rnd 3: In each ch-3 loop, work (sc, hdc, 5 dc, hdc, sc), then join. (5 petals of 9 sts each = 45 sts)
Fasten off, leaving a 10 in (25.4 cm) tail. The backing is 2.75 in (7.0 cm) across. Center the rolled rose on the backing and sew through the base of the spiral and Rnd 1 of the backing.
Make All Pieces
Before you start assembly, check that you have these pieces:
- Cream: 1 basket body (Rnds 1–17) and 2 straps
- Lavender: 4 rose centers
- Lilac: 4 rose backings, each with its center sewn on
Count placement positions on the 72 stitches of Rnd 17, starting from the join:
Rnd 17 stitch: 1 10 19 28 37 46 55 64
Piece: S1 R1 -- R2 S2 R3 -- R4
S = strap, R = rose. The roses are 18 sts (4 in / 10.2 cm) apart. Each strap sits 9 sts from the roses on either side.
Joining
Roses: Pin each rose with its center on Rnd 13, directly below its marked stitch. The petals will span Rnds 11–15. Using the lilac tail, sew each petal tip to the nearest mesh chain. Then stitch the rose center to the sc where two loops meet, for six anchor points in all.
Keep your stitches snug but not tight. Pulling too hard puckers the mesh. The lattice should still measure 16 in (40.6 cm) around.
Straps: Place one strap’s bottom loop inside the basket, centered on stitch 1, so it covers stitches 72, 1 and 2. Whipstitch both edges of the loop through Rnds 16 and 17 across those 3 stitches. Attach the second strap the same way over stitches 36, 37 and 38. Check that neither strap is twisted.
Size checkpoint: Hold both straps together 12 in (30.5 cm) above the rim. The rim should hang level.
Border
Work the border in cream into the 72 stitches of Rnd 17. The straps are already sewn inside the rim, and the shells cover their stitched ends.
Border gauge: each shell repeat uses 6 stitches and covers 1.33 in (3.4 cm).
Rnd 18: Ch 1, sc in first st, skip 2 sts, 5 dc in next st, skip 2 sts, sc in next st, repeat from * 10 more times (11 repeats in all). Then skip 2 sts, 5 dc in next st, skip the last 2 sts and join to the first sc. (12 shells, 12 sc)
Count by quarters: each quarter of the rim has 18 stitches, which is exactly 3 shell repeats. Stitches 1 and 37 each get a sc, so each strap sits under a sc between two shells.
Why the math works: 72 stitches ÷ 6 stitches per repeat = 12 repeats with nothing left over. The round has 12 × 5 dc + 12 sc = 72 stitches, the same as the round below, so the rim won’t ruffle or pull in.
Fasten off and weave in all ends.
Hang: Push the free top end of each strap through the wooden ring. Fold 1.5 in (3.8 cm) over the ring and sew it down. That leaves about 11.9 in (30.2 cm) of visible strap on each side.
Final Blocking
- Spray the basket until it is damp, not soaked.
- Wrap a toilet paper roll in plastic and stand it inside the basket.
- Pat the base flat to 5.1 in (13.0 cm) across.
- Gently pull the lattice upward so the diamonds open evenly to 3.95 in (10.0 cm) below the border.
- Pin the shells so the scallops stand evenly, adding 0.55 in (1.4 cm).
- Curl the lavender petals upward and spread the lilac petals flat.
- Let the basket dry completely, then remove the roll.
Final Quality-Control Checklist
- The base measures 5.1 in (13.0 cm) across and lies flat.
- The Rnd 7 ridge goes all the way around.
- Rnds 11–15 each have 18 loops.
- Rnds 16 and 17 each have 72 sc.
- The border has 12 shells and 12 sc.
- The total height is 4.5 in (11.4 cm).
- The roses sit at stitches 10, 28, 46 and 64.
- The straps sit at stitches 1 and 37, and neither is twisted.
- The basket hangs level.
Troubleshooting
Base cups: Your tension is too tight or you missed an increase. Recount, then go up a hook size.
Base ruffles: You have extra stitches or loose tension. Recount, then go down a hook size.
Lattice slants: Some rounds started in the wrong spot. Always sl st across 3 ch to reach the middle of the loop.
Rim flares: Rnd 16 has extra stitches. Rework it with exactly 4 sc per loop.
The roll doesn’t fit: Remake the base with a larger hook until it measures at least 4.75 in (12.1 cm) across.
Basket tilts: One strap is off-center or longer than the other. Recount from the join and sew it again.
Rose spiral loosens: Add a few more stitches through all the layers at the base.
Care
Remove the wooden ring first. Hand wash in cool water with mild soap, press out the water in a towel, and reshape the basket to dry flat.

Final Notes
Every measurement in this basket comes from 72 stitches. The base has 72 dc and measures 5.1 in (13.0 cm) across. The solid band of 72 sc rises 0.8 in (2.0 cm). The lattice turns those stitches into 18 loops of 4 stitches each, and Rnd 16 turns them back into 72 sc. The border divides the same 72 stitches into 12 shells, and the roses and straps are spaced evenly on that count. If your base is right, the rest of the basket will be too.
Happy crocheting!