This hanging holder stacks three spare toilet rolls on the wall. It has a long cream backing panel, three oval baskets and a raised leaf sprig on the front of each basket. The top of the panel narrows into a tab that wraps around a wooden ring, so the holder hangs from any hook or knob.
It’s made in one neutral cream color, so the texture and the raised leaves do the decorating. Firm single crochet keeps the baskets sturdy enough to hold their shape when full.
This pattern uses US crochet terms. The finished holder measures about 7.5 in (19.1 cm) wide and 28.5 in (72.4 cm) from the bottom edge to the top fold. It’s about 30.5 in (77.5 cm) to the top of the ring.
You’ll crochet the panel in rows and each basket in joined rounds. The leaves, stems and reinforcement strips are made separately. Then you edge the panel, sew everything together and wrap the tab around the ring.
Finished Size and Construction
- Finished size: 7.5 in × 28.5 in (19.1 × 72.4 cm), plus the ring
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Bulky (#5) cotton or cotton blend
- Hook: 6.0 mm (US J-10)
- Number of pieces: 25 crocheted pieces plus 1 wooden ring
- Layout: 3 baskets stacked vertically on 1 backing panel
- Basket size: 7 in wide × 5 in deep × 3.5 in tall (17.8 × 12.7 × 8.9 cm)
- Panel before border: 7 in × 29.75 in (17.8 × 75.6 cm), unfolded
- Border depth: 0.25 in (0.6 cm) per side
Materials
Choose a smooth, firm bulky cotton or cotton blend. Cotton holds its shape in a bathroom and doesn’t stretch under the weight of the rolls. Avoid very soft or loosely plied yarn, because the baskets will sag.
- Cream: about 250 g / 300 yd (274 m)
The yardage includes about a 15% margin for your gauge swatch and sewing tails.
Tools:
– 6.0 mm (US J-10) crochet hook
– Wooden ring, 2.5 in (6.4 cm) diameter
– Tapestry needle
– 6 locking stitch markers
– Rustproof pins
– Measuring tape
– Wall hook with screws (optional, for hanging)
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- sc2tog – single crochet 2 together
- BLO – back loop only
- st(s) – stitch(es)
- rnd – round
Special stitch – reverse sc (crab stitch): Work from left to right (right-handed). Insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over and pull through both loops. This makes the rope-like rim.
Gauge and Checkpoints
Gauge: 12 sc × 13 rows = 4 in (10.2 cm)
Ch 15 and work 14 sc per row for 16 rows. Measure 4 in (10.2 cm) in the center of the swatch. Gauge matters here: if your fabric is loose, the baskets will droop and the rolls won’t sit upright.
Test one basket first. It’s the fastest way to check both gauge and fit.
Checkpoints:
– Basket base after Rnd 8: about 7 × 5 in (17.8 × 12.7 cm)
– Basket after Rnd 20: about 3.5 in (8.9 cm) tall. A standard roll should drop in easily.
– Panel after Row 5: 7 in (17.8 cm) wide
– Panel after Row 39: 12 in (30.5 cm) long
– Panel after Row 72: about 22 in (55.9 cm) long
Too big? Go down a hook size, to 5.5 mm. Too small? Go up to a 6.5 mm hook. If your stitches match but your rows don’t, keep the hook and check your row checkpoints. The basket positions are counted in rows, so they’ll still line up.

Baskets (Make 3)
The base is worked in joined rounds. Join each round with a sl st to the first sc and ch 1. The ch 1 does not count as a stitch.
Rnd 1: Ch 9. Sc in 2nd ch from hook, sc in next 6 ch, 3 sc in last ch. Working along the opposite side of the chain, sc in next 6 ch, 2 sc in the same ch as the first sc. Join. (18 sts)
Rnd 2: Inc in first st, sc 6, inc in next 3 sts, sc 6, inc in last 2 sts. Join. (24 sts)
Rnd 3: (Sc 1, inc) once, sc 6, (sc 1, inc) 3 times, sc 6, (sc 1, inc) twice. Join. (30 sts)
Rnd 4: Continue this pattern, with one more sc between the increases at each curved end. Join. (36 sts)
Rnd 5: As Rnd 4. (42 sts)
Rnd 6: As Rnd 4. (48 sts)
Rnd 7: As Rnd 4. (54 sts)
Rnd 8: As Rnd 4. (60 sts)
Each round adds exactly 6 stitches: 3 at each curved end. The 6 stitches along each straight side stay the same. Check your base size against the checkpoint now.
Walls:
Rnd 9: Sc in BLO of each st around. Join. (60 sts) This makes the sharp turning ridge between base and wall.
Rnds 10–19: Sc in each st around. Join. (60 sts per round)
Rnd 20 (rim): Reverse sc in each st around. Join. (60 sts) Fasten off and weave in the ends.
Lay the basket flat and find the 21 stitches centered on one straight side. Mark the first and last of them. These 21 stitches form the back wall that gets sewn to the panel.
Leaf Appliqué (Make 3 sets)
Each set has 1 large leaf, 4 small leaves and 1 stem. Leave a 12 in (30.5 cm) tail on every piece for sewing.
Large leaf (1 per set): Ch 7. Sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch (6 sts). Ch 1 and rotate. Working in the free loops of the same chain: sc in first, hdc in next, dc in next 2, hdc in next, sc in last (6 sts). Sl st into the first sc. (12 sts + ch-1 tip)
The two halves share one chain, so the leaf gets a raised center vein. It measures about 1.75 in long × 1 in wide (4.4 × 2.5 cm).
Small leaf (4 per set): Ch 6. Sc in 2nd ch from hook, hdc, dc, hdc, sc (5 sts). Ch 1 and rotate. Working in the free loops: sc, hdc, dc, hdc, sc (5 sts). Sl st into the first sc. (10 sts + ch-1 tip)
Each small leaf is about 1.5 in × 0.75 in (3.8 × 1.9 cm).
Stem (1 per set): Ch 7. Sl st in the back bump of the 2nd ch from hook and each ch across. (6 sl sts) About 2 in (5.1 cm) long.
Assemble the motif:
1. Center the stem vertically on the basket front, opposite the back wall. Start it about 0.5 in (1.3 cm) above the turning ridge.
2. Sew the large leaf to the top of the stem, pointing straight up.
3. Sew one pair of small leaves about 0.5 in (1.3 cm) below the top leaf, angled up at roughly 45°.
4. Sew the second pair at the base of the stem, angled the same way.
The finished motif is about 3.25 in tall × 4 in wide (8.3 × 10.2 cm). It should sit within the wall, just below the rim.
Reinforcement Strips (Make 3)
Row 1: Ch 4. Sc in 2nd ch from hook and each ch across. (3 sts)
Rows 2–8: Ch 1, turn, sc in each st across. (3 sts per row)
Fasten off. Each strip measures 1 in × 2.5 in (2.5 × 6.4 cm).
Backing Panel
Work in rows. Ch 1 at the start of each row does not count as a stitch.
Rounded bottom:
Row 1: Ch 14. Sc in 2nd ch from hook and each ch across. (13 sts)
Row 2: Ch 1, turn. Inc in first st, sc 11, inc in last st. (15 sts)
Row 3: Ch 1, turn. Inc, sc 13, inc. (17 sts)
Row 4: Ch 1, turn. Inc, sc 15, inc. (19 sts)
Row 5: Ch 1, turn. Inc, sc 17, inc. (21 sts)
Straight body:
Rows 6–72: Ch 1, turn. Sc in each st across. (21 sts per row)
On the right side, place markers at Rows 8, 19, 32, 43, 56 and 67. These are the basket base and rim lines.
Shoulder taper: Each odd row from 73 to 85 decreases at both ends. Each even row from 74 to 84 is worked even.
– Row 73: Sc2tog, sc 17, sc2tog. (19 sts)
– Row 74: Sc across. (19 sts)
– Row 75: Sc2tog, sc 15, sc2tog. (17 sts)
– Row 76: (17 sts)
– Row 77: Sc2tog, sc 13, sc2tog. (15 sts)
– Row 78: (15 sts)
– Row 79: Sc2tog, sc 11, sc2tog. (13 sts)
– Row 80: (13 sts)
– Row 81: Sc2tog, sc 9, sc2tog. (11 sts)
– Row 82: (11 sts)
– Row 83: Sc2tog, sc 7, sc2tog. (9 sts)
– Row 84: (9 sts)
– Row 85: Sc2tog, sc 5, sc2tog. (7 sts)
Tab:
Rows 86–97: Ch 1, turn. Sc across. (7 sts per row)
Don’t fasten off. Go straight into the Border.
Make All Pieces
Everything is made in Cream:
- Backing panel: 1
- Baskets: 3
- Large leaves: 3
- Small leaves: 12
- Stems: 3
- Reinforcement strips: 3
Total: 25 crocheted pieces, plus 1 wooden ring.
Layout (front view, top to bottom):
( ring )
| tab | Rows 86–97 (top 5 folded over ring)
/ taper \ Rows 73–85
| Basket 3 (top) | base Row 56, rim Row 67
| gap |
| Basket 2 (middle) | base Row 32, rim Row 43
| gap |
| Basket 1 (bottom) | base Row 8, rim Row 19
\ rounded bottom / Rows 1–5
Joining
Work the Border (next section) on the panel first, then come back here.
1. Reinforcement strips. Center one strip horizontally on the back of the panel behind each rim line (Rows 19, 43 and 67). Pin it in place.
2. Rim seam. Line up the 21 marked back-wall stitches of a basket’s rim with the 21 stitches of the rim row on the panel, matching them 1-to-1. Whipstitch through the rim stitch, the panel stitch and the strip behind it. Because both edges have 21 stitches, the seam lies flat without gathers.
3. Base seam. Rnd 9 was worked in the back loops, so the front loops of Rnd 8 are free on the outside of the basket. Sew the 21 back front loops 1-to-1 to the 21 stitches of the base row (Rows 8, 32 and 56).
4. Tension. Pull each stitch snug, but don’t pucker the panel. The seam should lie as flat as the fabric around it.
5. Ring. Fold the last 5 tab rows over the ring to the back. Whipstitch the top edge of the tab to the back of Row 88 and secure the tail well.
Size checkpoint: The baskets should be about 4 in (10.2 cm) apart, with their bases about 7.5 in (19.1 cm) apart. A roll standing upright should poke out above the rim but leave room before the next basket.
Border (Panel)
Border gauge: Same as the body: 12 sc and 13 rows = 4 in (10.2 cm). One sc per row end puts 13 edging stitches where the body has 12 stitches across. That’s close enough to stay flat on firm cotton.
Rnd 1: Ch 1. Along the last row of the tab (top edge): 3 sc in first st, sc 3, 3 sc in last st.
– Top edge: 11 sts (7 + 4 extra)
– Left side: 1 sc in each row end, Rows 97 down to 1. 97 sts
– Bottom edge: Working in the free loops of the foundation chain: 3 sc in first ch, sc 11, 3 sc in last ch. 17 sts (13 + 4 extra)
– Right side: 1 sc in each row end, Rows 1 up to 97. 97 sts
– Join.
Rnd 1 total: 222 sts. This is the 214 existing stitches and row ends worked 1 each, plus 8 extra stitches (2 extra at each of the 4 corners).
Rnd 2: Ch 1. Reverse sc in each st around. Join. (222 sts) Fasten off.
Why the math works: Each corner stitch gets 3 sc, which adds 2 stitches per corner and turns the corner without cupping. The corner stitch itself is counted only once, in the top (11) and bottom (17) edge counts. The 7 tab stitches and 13 foundation stitches already include their corner stitches. The border adds 0.25 in (0.6 cm) on each side, so the 7 in (17.8 cm) panel becomes 7.5 in (19.1 cm) wide.
Final Blocking
- Lay the panel face down on a towel, with the baskets hanging off the edge of the work surface if needed.
- Spray the panel lightly with water. Don’t soak it.
- Pin the panel straight at 7.5 in (19.1 cm) wide, keeping the shoulder taper symmetrical.
- Stuff each basket with a toilet roll or rolled towel so the oval shape sets.
- Mist the leaves and press them gently with your fingers to open the tips.
- Let everything dry completely before hanging.
Final Quality-Control Checklist
- Each basket has 60 sts in every wall round.
- The basket bases measure about 7 × 5 in (17.8 × 12.7 cm).
- The panel is 21 sts wide through Rows 5–72.
- The taper ends at 7 sts and both sides are symmetrical.
- Border Rnd 1 has 222 sts.
- The rim and base seams match 21 stitches to 21.
- The leaf motifs are centered and all tips point upward.
- The ring is secure and the tab seam is hidden.
- All ends are woven in and nothing is visible from the front.
Troubleshooting
- The base is cupping: Your tension is tight, or you missed an increase. Recount to 6 increases per round.
- The base is rippling: You’ve added extra increases. Check that the straight sides stay at 6 sts each.
- The basket is leaning forward: Your rim seam is too loose. Resew it more firmly through the reinforcement strip.
- The panel edge is flaring: Your row-end stitches are too loose. Go down a hook size for the border only.
- The leaves are curling: Steam-block them flat before sewing.
- The roll won’t fit: Add Rnd 9 to the base (66 sts) and keep 66 sts for every wall round.
Care
Spot clean when you can. If you need to wash the holder, hand wash it cool, reshape it with rolls inside and lay it flat to dry.

Final Notes
The measurement chain is simple:
– 12 sc = 4 in (10.2 cm), which sets the 21-stitch, 7 in (17.8 cm) panel.
– The 60-stitch basket base measures about 7 × 5 in (17.8 × 12.7 cm).
– 21 back-wall stitches sew 1-to-1 to 21 panel stitches.
– The 222-stitch border brings the panel to 7.5 in (19.1 cm) wide.
Check each step and the finished holder will hang straight and hold its rolls neatly.
Happy crocheting!