This two-piece set pairs a frog-shaped plastic bag holder with a matching towel ring. The frog is a tall, rounded bell in bright lime green with two bulging eyes and a stitched smile. Yellow bobble dots, butter-yellow flowers with cream centers, and dark green leaves decorate the front. A dark green and yellow scalloped trim finishes the open bottom.
The towel ring is a padded lime green ring. It has a dark green tab and hanging loop at the top and one matching flower with two leaves at the bottom.
The pattern uses US crochet terms. Without the hanging loop, the bag holder measures about 6.5 in (16.5 cm) wide flat at the hem and 13 in (33.0 cm) tall. The covered towel ring measures about 5.25 in (13.3 cm) across.
The holder body is worked top-down in joined double crochet rounds. It starts at the closed rounded top and widens toward the open bottom. The eyes, flowers, leaves and dots are made separately and sewn on. For the towel ring, you crochet a single crochet strip, wrap it around a padded ring and sew it closed.
Finished Size and Construction
- Finished size: bag holder 6.5 in (16.5 cm) wide x 13 in (33.0 cm) tall; towel ring about 5.25 in (13.3 cm) across
- Skill level: Easy-Intermediate
- Terminology: US crochet terms
- Yarn weight: worsted (#4)
- Hook: 4.0 mm (G-6)
- Number of finished items: 2 (bag holder and towel ring)
- Components: 1 body, 2 eye bulbs, 2 eye whites, 1 hem trim, 3 flowers, 6 leaves, 12 dots, 1 ring cover, 1 ring tab, 2 hanging loops
- Layout: appliqués on the front of the holder; one flower cluster at the bottom of the ring
- Body size before trim: 6.5 in (16.5 cm) wide x 11.5 in (29.2 cm) tall
- Trim depth: 1.5 in (3.8 cm)
Materials
Choose a smooth worsted-weight cotton or cotton blend. Cotton holds its shape, washes easily and shows the double crochet texture clearly. Acrylic also works, but the holder will be softer.
- Lime green (main): 110 g, about 190 m (208 yd)
- Dark green: 30 g, about 52 m (57 yd)
- Butter yellow: 30 g, about 52 m (57 yd)
- Cream: 5 g, about 9 m (10 yd)
These quantities include a small margin for a gauge swatch and sewing tails.
Tools and notions:
- 4.0 mm (G-6) crochet hook
- Tapestry needle
- Two 12 mm black safety eyes
- Small amount of fiberfill
- 4.5 in (11.4 cm) wooden or plastic ring, about 0.5 in (1.3 cm) thick
- Thin strip of quilt batting or felt to pad the ring
- Stitch markers, scissors, measuring tape, pins
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- fsc – foundation single crochet
- inc – 2 sc in the same stitch
- dec – sc2tog
- MR – magic ring
- st(s) – stitch(es)
- sp – space
Special stitch – fsc: Ch 2. Insert the hook in the 2nd ch from the hook and pull up a loop. Yarn over and pull through 1 loop (this makes the “chain”). Yarn over and pull through 2 loops (this makes the “sc”). For each following fsc, insert the hook under the 2 loops of the previous “chain” and repeat.
Gauge and Checkpoints
- Body gauge: 16 dc x 8 rounds = 4 in (10.2 cm)
- Ring and tab gauge: 18 sc x 20 rows = 4 in (10.2 cm)
Make the body first. It’s the largest piece, and its size decides whether the trim and appliqués will fit. Measure it flat without stretching.
Checkpoints:
- After Round 3: flat circle about 3 in (7.6 cm) across
- After Round 8: tube about 4.5 in (11.4 cm) wide flat
- After Round 18: tube about 6.5 in (16.5 cm) wide flat
- After Round 24: body 6.5 in (16.5 cm) wide x 11.5 in (29.2 cm) tall
If the body is too wide, go down half a hook size. If it’s too narrow, go up half a hook size. Don’t change the stitch counts, because the trim depends on a 52-stitch hem.

Bag Holder Body
Use lime green. Join each round with a sl st to the top of the beginning ch 3. The ch 3 counts as the first dc.
Round 1: MR, ch 3, 11 dc in ring, join. (12 dc)
Round 2: Ch 3, dc in same st, 2 dc in each st around, join. (24 dc)
Round 3: Ch 3, 2 dc in next st, (dc in next st, 2 dc in next st) 11 times, join. (36 dc)
Rounds 4–8: Ch 3, dc in each st around, join. (36 dc)
This is the rounded head. Flattened, it should measure about 4.5 in (11.4 cm) across.
Round 9: Ch 3, dc in next 7 sts, 2 dc in next st, (dc in next 8 sts, 2 dc in next st) 3 times, join. (40 dc)
Rounds 10–11: Ch 3, dc in each st around, join. (40 dc)
Round 12: Ch 3, dc in next 8 sts, 2 dc in next st, (dc in next 9 sts, 2 dc in next st) 3 times, join. (44 dc)
Rounds 13–14: Ch 3, dc in each st around, join. (44 dc)
Round 15: Ch 3, dc in next 9 sts, 2 dc in next st, (dc in next 10 sts, 2 dc in next st) 3 times, join. (48 dc)
Rounds 16–17: Ch 3, dc in each st around, join. (48 dc)
Round 18: Ch 3, dc in next 10 sts, 2 dc in next st, (dc in next 11 sts, 2 dc in next st) 3 times, join. (52 dc)
Rounds 19–23: Ch 3, dc in each st around, join. (52 dc)
Round 24: Ch 1, sc in each st around, join to first sc. (52 sc) Fasten off.
The four increase rounds are evenly spaced, so the sides flare gently into a bell. The final sc round firms up the opening so the trim is easier to sew on.
Eye Bulbs (Make 2)
Use lime green and work in continuous rounds.
Round 1: MR, 6 sc. (6 sc)
Round 2: Inc in each st. (12 sc)
Round 3: (Sc, inc) 6 times. (18 sc)
Rounds 4–6: Sc in each st. (18 sc)
Round 7: (Sc, dec) 6 times. (12 sc)
Sl st, then fasten off with a long tail. Stuff lightly through the opening. Each bulb is about 1.5 in (3.8 cm) across.
Eye Whites (Make 2)
Use cream.
Round 1: MR, 6 sc. (6 sc)
Round 2: Inc in each st, sl st to join. (12 sc)
Fasten off with a tail. Each disc is about 1 in (2.5 cm) across. Push a 12 mm safety eye through the center of the disc. Place the disc on the front of an eye bulb so a green rim shows around it. Lock the backing inside the bulb, then sew the edge of the disc down.
Flowers (Make 3)
Round 1: With yellow, MR, ch 1, 10 sc, join. (10 sc)
Round 2: (Sl st in next st, [hdc, 3 dc, hdc] in next st) 5 times, join. (5 petals; 30 sts)
Fasten off with a long tail. Each flower is about 2 in (5.1 cm) across. For the beaded center, work 6 French knots in cream, clustered in the middle.
Leaves (Make 6)
Use dark green.
Ch 8. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch. (7 sts) Ch 1 for the tip. Working along the other side of the foundation chain: sc in first ch, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in next ch, sl st in last ch. (7 sts) Fasten off.
Each leaf is about 1.75 in (4.4 cm) long. If you like, use the tail to sew one long back stitch down the center as a vein.
Dots (Make 12)
Use yellow.
MR, ch 1, 8 sc in ring, pull the ring tight, join. (8 sc)
Fasten off with a tail. Pulling the ring tight cups each dot into a small dome about 0.6 in (1.5 cm) across.
Hanging Loops (Make 2)
Use dark green.
Ch 31. Sl st in 2nd ch from hook and in each ch across. (30 sl st) Fasten off, leaving tails at both ends.
Each strip is about 6 in (15.2 cm) long and folds into a 3 in (7.6 cm) loop.
Towel Ring Cover
Wrap the 4.5 in (11.4 cm) ring with batting or felt until it’s about 0.8 in (2.0 cm) thick. Secure the padding with a few stitches.
Use lime green.
Row 1: Ch 13, sc in 2nd ch from hook and in each ch across. (12 sc)
Rows 2–62: Ch 1, turn, sc in each st across. (12 sc)
The strip measures about 2.7 in (6.9 cm) wide x 12.4 in (31.5 cm) long. Fasten off with a long tail. The strip is a little shorter than the distance around the middle of the padded ring, so it stretches to fit snugly.
Ring Tab
Use dark green.
Row 1: Ch 9, sc in 2nd ch from hook and in each ch across. (8 sc)
Rows 2–14: Ch 1, turn, sc in each st across. (8 sc)
The tab measures about 1.8 in (4.6 cm) wide x 2.8 in (7.1 cm) long. Fasten off with a long tail.
Make All Pieces
Before assembling, check that you have every piece:
- Lime green: 1 body, 2 eye bulbs, 1 ring cover
- Cream: 2 eye whites, French knots for 3 flower centers
- Yellow: 3 flowers, 12 dots, yellow rounds of the trim
- Dark green: 6 leaves, 1 ring tab, 2 hanging loops, green rounds of the trim
Front layout of the bag holder (top to bottom):
[EYE] [EYE]
\_smile_/
o o
o [FLOWER+2 LEAVES]
o o
[FLOWER+2 LEAVES] o
o o o
o o
~~~~~ green scallops ~~~~~
~~~~~ yellow scallops ~~~~
Each “o” marks a dot. Two flower clusters and the 12 dots go on the front of the holder. The third flower and its 2 leaves go on the towel ring.
Joining
Sew everything with matching yarn and a tapestry needle. Use small whipstitches through both loops of the edge stitches. Pull each stitch just snug enough to close the gap without puckering the double crochet fabric.
Eyes: Flatten the body with the Round 1 center at the top. Pin the eye bulbs at about 10 and 2 o’clock on the head, over Rounds 2–5, with their open edges against the body. Sew around each open edge.
Smile: With dark green, back stitch a shallow curve about 1.25 in (3.2 cm) wide across Round 6, centered between the eyes.
Hanging loop: Fold one loop in half. Sew both ends to the top of the head, through Round 1, between the eyes.
Appliqués: Pin the pieces following the layout. Tuck 2 leaves under each flower so the tips peek out on opposite sides. Sew the leaves first, then the flowers, then the dots, stitching around their outer edges. Sew through the front layer only so the holder stays open.
Towel ring: Lay the strip around the padded ring. Whipstitch Row 1 to Row 62 to close the strip into a loop. Fold the long edges around the ring and whipstitch them together along the inner edge, matching 1 strip row to 1 strip row. Wrap the tab around the top of the ring and sew its short ends together at the back. Fold the second hanging loop and sew its ends inside the top of the tab. Sew the third flower and 2 leaves to the front at the bottom center.
Size checkpoint: The covered ring should measure about 5.25 in (13.3 cm) across.
Border: Scalloped Hem Trim
You’ll work the trim as a separate ring and then sew it to Round 24 of the body.
Border gauge: The fsc foundation should match the body’s hem: 52 fsc measure about 13 in (33.0 cm) around, the same as the hem.
Round 1 (dark green): Fsc 52, sl st to first fsc to form a ring, making sure it isn’t twisted. (52 fsc)
Round 2 (dark green): Ch 1, sc in first st, skip 1 st, 5 dc in next st, skip 1 st, (sc in next st, skip 1 st, 5 dc in next st, skip 1 st) 12 times, sl st to first sc. (13 scallops; 13 sc + 65 dc = 78 sts) Fasten off.
Round 3 (yellow): Join yellow in the 3rd dc of any scallop. (Sc in 3rd dc of scallop, ch 5) 13 times, sl st to first sc. (13 sc + 13 ch-5 sps; 13 sc + 65 ch = 78 sts)
Round 4 (yellow): (Sc in next sc, 7 dc in next ch-5 sp) 13 times, sl st to first sc. (13 sc + 91 dc = 104 sts) Fasten off.
Why the math works: Each green scallop uses exactly 4 foundation stitches, and 52 ÷ 4 = 13, so you get 13 scallops with no stitches left over. Round 3 anchors 1 sc at the center of each green scallop, so the 13 ch-5 arcs hang between the green tips. Round 4 fills each arc with a 7-dc fan, which sets the yellow scallops below and between the green ones.
Attaching: Line up the 52 fsc of Round 1 with the 52 sc of body Round 24, one stitch to one stitch, and whipstitch them together with lime green. Because no stitches are added or skipped, the trim lies flat and the hem stays 6.5 in (16.5 cm) wide flat. The finished holder is 11.5 in (29.2 cm) of body plus 1.5 in (3.8 cm) of trim, for 13 in (33.0 cm) total.
Final Blocking
- Lightly mist both items with water.
- Lay the bag holder flat with the appliqués facing up.
- Ease the body to 6.5 in (16.5 cm) wide at the hem and 13 in (33.0 cm) long.
- Pin each green and yellow scallop open so the fans spread evenly.
- Shape the eye bulbs round by hand.
- Flatten the flower petals and leaves with your fingers.
- Lay the towel ring flat and turn the tab so it’s centered at the top.
- Let both items dry completely before hanging them.
Final Quality-Control Checklist
- The body has 52 stitches at the hem and measures 6.5 in (16.5 cm) wide flat
- The trim has 13 green and 13 yellow scallops, evenly spaced
- The eyes are level and the smile is centered
- The safety eyes are locked securely
- All 12 dots, both flower clusters and the hanging loop are sewn on firmly
- Appliqués are stitched through the front layer only
- The ring cover seam sits on the inner edge of the ring
- All yarn ends are woven in and trimmed
Troubleshooting
Body flares or ruffles: Your gauge is too loose. Go down half a hook size and recheck the width after Round 8.
Head looks pointy: Rounds 1–3 are too tight. Loosen your dc and check your increase counts.
Trim doesn’t fit the hem: Count the stitches on both edges. If the fsc ring is too long, rework it with firmer tension; it must lie flat at 52 stitches.
Gaps in the ring cover: Add more padding, or remove a few rows so the strip stretches more firmly.
Flowers curl: Steam them lightly and pin them flat to dry.
Care
Remove any bags first. Hand wash in cool water with mild soap, gently press out the water and dry flat. Cool water protects the safety eyes.

Final Notes
Here is how the measurements fit together. At a gauge of 16 dc x 8 rounds, the 36-stitch head is 4.5 in (11.4 cm) wide flat. The body widens to a 52-stitch hem 6.5 in (16.5 cm) wide and reaches 11.5 in (29.2 cm) tall. The 52-stitch fsc trim matches the hem stitch for stitch and adds 1.5 in (3.8 cm), so the holder is 13 in (33.0 cm) long. For the towel ring, the 12-stitch sc strip covers a padded 4.5 in (11.4 cm) ring, giving a finished ring about 5.25 in (13.3 cm) across.
Happy crocheting!