Three crocheted baskets in rust brown and cream with decorative lace trim and wooden handles on beige fabric.

Mitten Lattice Hanging Toilet Paper Holder Crochet Pattern

by

This cozy bathroom organizer has three round pockets stacked one above the other. Two rust straps hold them together and loop over a wooden ring at the top. Each pocket fits one standard toilet paper roll. The rounded body is worked in solid rust single crochet, and a cream band of crossed double crochet lattice sits at the top, finished with a twisted cream rim.

On the front of each pocket, a pair of tiny cream mittens hangs from a little rust bow, the way real mittens hang from a cord. Each mitten has a ribbed cuff and an embroidered rust snowflake. The look is warm, rustic, and a little Scandinavian, and it works well from late November right through winter.

This pattern uses US crochet terms. The finished hanger measures about 5.9 in (15.0 cm) wide and about 24 in (61.0 cm) tall, ring included. Each pocket is about 5 in (12.7 cm) tall.

Each pocket is worked in joined rounds from the base up: a flat circle, a gentle bulge, a cream lattice band, and a reverse single crochet rim. Next you make two long straps, six mittens, and three bows. To finish, sew the straps to the back of each pocket and fold them over the ring.

Finished Size and Construction

  • Finished size: about 5.9 in (15.0 cm) wide x 24 in (61.0 cm) tall, ring included
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Aran / heavy worsted (category 4)
  • Hook: 5.5 mm (I-9) for pockets, straps, and bows; 4.5 mm (US 7) for mittens
  • Number of pieces: 3 pockets, 2 straps, 6 mittens, 3 bows
  • Layout: 1 column x 3 pockets, stacked vertically
  • Pocket size: 5 in (12.7 cm) tall; 5.9 in (15.0 cm) across at the widest point; 5.3 in (13.5 cm) across the opening
  • Pocket height before rim border: about 4.5 in (11.4 cm)
  • Rim border depth: about 0.5 in (1.3 cm)

Materials

Pick a smooth, sturdy acrylic or cotton-blend aran yarn. Soft wool will sag under the weight of the rolls. Plied yarn shows off the crossed stitches nicely.

  • Rust (Color A): about 250 g / 450 m — pocket bodies, straps, bows, embroidery
  • Cream (Color B): about 125 g / 225 m — lattice bands, rims, mittens

You will also need:

  • 5.5 mm (I-9) and 4.5 mm (US 7) crochet hooks
  • 1 wooden ring, 3 in (7.6 cm) in diameter
  • Stitch markers (at least 6)
  • Tapestry needle, scissors, measuring tape
  • Optional: 3 circles of plastic canvas, about 5 in (12.7 cm) wide, to stiffen the bases

The yarn amounts include a margin of roughly 15% for your gauge swatch and for small tension differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together
  • BLO – back loop only
  • MR – magic ring
  • st(s) – stitch(es)
  • rnd – round

Special stitches

  • X-st (crossed double crochet unit, worked over 3 sts): Skip the next 2 sts, dc in the following st, ch 1, then working in front of the dc you just made, dc in the first skipped st. The ch-1 sits over the second skipped st, so one X-st uses 3 sts and makes 3 sts (dc, ch-1, dc).
  • Reverse sc (crab stitch): Working from left to right (right to left for left-handers), insert the hook into the next st to the right, yarn over, pull up a loop, yarn over, and draw through both loops. This makes the twisted, rope-like rim.

Gauge and Checkpoints

With the 5.5 mm hook: 13 sc x 14 rnds = 4 in (10.2 cm). Work all the sc tightly, since the pocket has to hold its shape.

Make one complete pocket before you start on the others. The checkpoints:

  • After Rnd 9 (base): a flat circle 5 to 5.25 in (12.7 to 13.3 cm) across, 54 sts.
  • After Rnd 13: circumference 18.5 in (47.0 cm), 60 sts.
  • After Rnd 18: side height about 2.6 in (6.6 cm) above the Rnd 10 ridge.
  • After Rnd 22: pocket height about 4.5 in (11.4 cm).
  • Finished pocket: 5 in (12.7 cm) tall. A roll should drop in easily.

Too big? Go down half a hook size. Too small? Go up half a hook size. Don’t fix sizing by adding stitches, because the lattice only works on a multiple of 3.

Rust-colored crocheted bag with cream rope trim, tiny cream mittens embroidered with red snowflakes, and a coordinating red bow accent.

Pocket (Make 3)

With the 5.5 mm hook and Color A. Work in joined rounds: sl st to the first st, then ch 1 (the ch does not count as a stitch).

Base

  • Rnd 1: 6 sc in MR. (6)
  • Rnd 2: inc in each st around. (12)
  • Rnd 3: sc 1, inc 6 times. (18)
  • Rnd 4: sc 2, inc 6 times. (24)
  • Rnd 5: sc 3, inc 6 times. (30)
  • Rnd 6: sc 4, inc 6 times. (36)
  • Rnd 7: sc 5, inc 6 times. (42)
  • Rnd 8: sc 6, inc 6 times. (48)
  • Rnd 9: sc 7, inc 6 times. (54)

Sides

  • Rnd 10: sc in BLO of each st around. (54) This makes the turning ridge where the base meets the sides.
  • Rnds 11–12: sc in each st around. (54)
  • Rnd 13: sc 8, inc 6 times. (60) This round makes the soft bulge.
  • Rnds 14–18: sc in each st around. (60)

At the last sl st of Rnd 18, change to Color B. Fasten off Color A.

Lattice band (Color B)

  • Rnd 19 (conversion): sc 8, sc2tog 6 times. (48 sc + 6 sc2tog = 54) The pocket narrows back to 54 sts, and 54 divides evenly into 18 X-sts.
  • Rnd 20: ch 2 (does not count), X-st 18 times, sl st to the top of the first dc. (18 X-sts = 36 dc + 18 ch-1 = 54)
  • Rnd 21: sl st in the next st to move the start over by 1 st, ch 2, X-st 18 times. Your last X-st will use the stitch under the joining sl st. Sl st to the top of the first dc. (54)
  • Rnd 22: repeat Rnd 21. (54)

Because each round starts 1 st further along, every X sits across the join between two X-sts below it. That offset is what gives you the open diamond lattice. In every round, count each dc and each ch-1 as one stitch.

Continue with the rim in the Border section. If you’re adding plastic canvas, slip a circle into the base now.

Straps (Make 2)

With the 5.5 mm hook and Color A, work in rows.

  • Foundation: ch 77.
  • Row 1: sc in 2nd ch from hook and in each ch across. (76)
  • Rows 2–4: ch 1, turn, sc in each st across. (76)

Fasten off and leave a 40 in (101.6 cm) tail. Each strap measures 23.4 in (59.4 cm) long and 1.1 in (2.8 cm) wide.

Mark the strap stitches, counting from one end:

  • Sts 1–8: ring loop and tail, 2.5 in (6.4 cm)
  • Sts 9–21: drop from the ring, 4.0 in (10.2 cm)
  • Sts 22–37: top pocket, 4.9 in (12.4 cm)
  • Sts 38–40: gap, 0.9 in (2.3 cm)
  • Sts 41–56: middle pocket
  • Sts 57–59: gap
  • Sts 60–75: bottom pocket
  • St 76: tucked under the bottom pocket

Check: 8 + 13 + 16 + 3 + 16 + 3 + 16 + 1 = 76.

Mittens (Make 6)

With the 4.5 mm hook and Color B. Each mitten is about 1.5 in (3.8 cm) wide and 2 in (5.1 cm) tall.

Cuff (worked sideways for vertical ribs)

  • Foundation: ch 3.
  • Row 1: sc in 2nd ch from hook and in the next ch. (2)
  • Rows 2–6: ch 1, turn, sc in BLO of both sts. (2)

Hand

  • Row 1: ch 1, turn the cuff 90 degrees, work 1 sc into the end of each cuff row. (6)
  • Rows 2–4: ch 1, turn, sc in each st. (6)
  • Row 5: ch 1, turn, sc2tog, sc 2, sc2tog. (4)
  • Row 6: ch 1, turn, sc2tog twice. (2) Fasten off.

Thumb: Join Color B to the side edge at the end of Hand Row 2, ch 3, sc in 2nd ch from hook and in the next ch, sl st into the side of Row 3. Fasten off. Put the thumb on the right edge for 3 mittens and on the left edge for the other 3, so each pair is mirrored.

Snowflake: With Color A, make 4 straight stitches, each about 0.5 in (1.3 cm) long, crossing at the center of the hand to form an 8-point star.

Bows (Make 3)

With the 5.5 mm hook and Color A: ch 36, sl st in the 2nd ch from hook and in each ch across. (35) Tie into a bow about 2 in (5.1 cm) wide, leaving two tails of about 1.5 in (3.8 cm). Sew one tail to the cuff of each mitten in a pair, with the thumbs pointing outward.

Make All Pieces

  • Color A: 3 pocket bodies (Rnds 1–18), 2 straps, 3 bows
  • Color B: 3 lattice bands and rims, 6 mittens (3 left, 3 right)

Layout (front view):

        ( O )        <- wooden ring
        /   \        <- straps, sts 9–21
   [ POCKET 1 ]      <- strap sts 22–37
        |   |        <- gap, sts 38–40
   [ POCKET 2 ]      <- strap sts 41–56
        |   |        <- gap, sts 57–59
   [ POCKET 3 ]      <- strap sts 60–75

Joining

Placing the straps: On each pocket, the round’s start is center back. Mark rim sts 48 and 7. These are 13 sts apart across the back, about 4.0 in (10.2 cm). Center one strap on each marker.

Stitch-to-stitch logic: Pin strap st 22 at the rim of the top pocket and st 37 at the Rnd 10 ridge. The 16 strap sts in between cover 4.9 in (12.4 cm) of strap against about 5 in (12.7 cm) of pocket side. Whipstitch along both long edges, going through one strap edge stitch and the nearest pocket stitch each time. Do the same for the middle pocket (sts 41–56) and the bottom pocket (sts 60–75). Tuck st 76 under the base and tack it down.

The ring: Pass sts 1–8 of each strap through the ring from front to back. Fold the end down behind the strap and sew it to sts 9–12.

Tension: Keep the whipstitch snug but not tight. If the pocket puckers behind the strap, you’ve pulled too hard.

Appliqué: Center a bow-and-mittens set on the front of each pocket, with the bow knot on Rnd 19 and the mittens over Rnds 15–18. Tack each mitten around its edge.

Size checkpoint: Hang the piece up. It should measure about 24 in (61.0 cm) from the top of the ring to the bottom of the lowest pocket, with gaps of 0.9 in (2.3 cm) between pockets.

Border (Pocket Rim)

The rim border is worked on each pocket right after Rnd 22, before any joining. Use the 5.5 mm hook and Color B.

Border gauge: the same 13 sts per 4 in (10.2 cm) as the body. The opening is 54 sts, which is 16.6 in (42.2 cm) around.

  • Rnd 23: ch 1, sc in each dc and in each ch-1 space around. (54) Flattened, that’s 27 sts across the front and 27 across the back.
  • Rnd 24: ch 1, reverse sc in each st around. (54) Again 27 front and 27 back. Fasten off and weave in the ends.

Why the math works: Rnd 9 finishes the base at 54 sts. Rnd 13 adds 6 sts (60). Rnd 19 takes away exactly those 6 (54). Every lattice round keeps 54 sts as 18 units of 3, and the rim works 1 sc into each of those 54 sts. The opening ends up matching the base, so the rim doesn’t flare or pull in. It also sits about 0.3 in (0.8 cm) inside the widest point, which helps hold the roll.

Final Blocking

  1. Spritz each pocket lightly with water until it’s damp.
  2. Stuff it with a roll wrapped in a plastic bag.
  3. Pull the lattice gently upward so the diamonds open up evenly.
  4. Shape the rim into a smooth circle.
  5. Pin the mittens flat and press the straps under a towel.
  6. Let everything dry for at least 24 hours before you hang it.

Final Quality-Control Checklist

  • Every pocket has 54 rim sts and measures 5 in (12.7 cm) tall.
  • The diamonds line up evenly, with no doubled X-st at the seam.
  • Both straps are 23.4 in (59.4 cm) long and neither one is twisted.
  • The pockets hang level, with matching 0.9 in (2.3 cm) gaps.
  • The mittens are mirrored pairs with thumbs pointing outward.
  • All tails are woven in and the ring seams are secure.

Troubleshooting

  • The base cups or ruffles: Recount Rnds 1–9. If it still cups, go up half a hook size.
  • The lattice leans: Block it straight, or shift Rnd 22 backward instead of forward.
  • The lattice looks crowded: Make sure the second dc in each X-st goes in front of the first dc.
  • The pocket sags: Your gauge is too loose. Add plastic canvas or use a smaller hook.
  • The rim flares: Rnd 23 must be exactly 54 sts, with 1 sc in each ch-1 space.

Care

Hand wash in cool water and lay flat to dry, reshaping it around a roll. Take off the wooden ring before washing.

Three stacked crocheted storage baskets in rust and cream tones with miniature mittens, hanging from a brass bathroom hook.

Final Notes

The measurement chain is simple. Gauge sets the base at 54 sts, 5.25 in (13.3 cm) across. The bulge grows to 60 and comes back to 54. The lattice and rim hold that 54 to a 5 in (12.7 cm) pocket. Two 76-st straps space three pockets along a 24 in (61.0 cm) hanger. Check each stage as you go and the finished piece will hang straight and hold its rolls nicely.

Happy crocheting!

Leave a Comment