The Peace Dove Lace Strip is a slim, airy panel of thread lace. Four scalloped fans alternate with three dove windows, all held inside a chain-link ivory frame. Two loops at the top let it hang from a small rod, a hook or a window latch.
The palette is quiet and seasonal. The scallops, frame and doves are ivory, the fan spokes and swags are soft tan, and small sage-green olive sprigs add color at the sides and in each dove’s beak.
This pattern uses US crochet terms. The finished strip measures 5 in × 19.25 in (12.7 cm × 48.9 cm), or 20.25 in (51.4 cm) including the hanging loops.
You crochet four identical fans first. Then you link them with tan chain swags that form the dove windows. Next you make and sew on the doves and sprigs. Finally, you work a three-round ivory border that frames the strip and adds the hanging loops.
Finished Size and Construction
- Finished size: 5 in × 19.25 in (12.7 cm × 48.9 cm); 20.25 in (51.4 cm) with loops
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Size 3 mercerized cotton crochet thread (CYC 0 Lace)
- Hook: 2.25 mm (US B-1)
- Number of pieces: 1 lace strip, 3 dove bodies, 3 wings and 9 leaf sprigs
- Layout: One vertical column: Fan, Window, Fan, Window, Fan, Window, Fan
- Piece sizes: Fan 4 in × 2 in (10.2 cm × 5.1 cm); window 4 in × 3.5 in (10.2 cm × 8.9 cm); dove 2.75 in × 2.25 in (7.0 cm × 5.7 cm)
- Size before border: 4 in × 18.5 in (10.2 cm × 47.0 cm)
- Border depth: Round 1 brings the width to 4.25 in (10.8 cm). Rounds 2–3 add 3/8 in (1.0 cm) on every edge.
Materials
Use a smooth, tightly plied mercerized cotton. It gives crisp scallops and holds its shape when blocked. Avoid fuzzy or very soft cotton, because the swags will droop.
- Ivory: 25 g / 69 m
- Tan (light gold-beige): 10 g / 27 m
- Sage green: 5 g / 14 m
All quantities include a margin of about 15% for swatching and weaving in ends.
Tools:
– 2.25 mm (US B-1) hook
– Fine tapestry needle
– Stitch markers
– Rust-proof pins
– Blocking board with a printed grid
– Ruler
– Scissors
– Spray bottle
– Optional light spray starch
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- dtr: double treble crochet (yarn over 3 times, then work off the loops in pairs)
- sp: space
- st(s): stitch(es)
- RS: right side
Special stitches
- Shell: (hdc, 5 dc, hdc) in the same sp. This makes 7 sts.
- Anchor loop: ch 6, then sl st in the 6th ch from the hook.
- Leaf: ch 6, sc in 2nd ch from hook, hdc in next ch, dc in next ch, hdc in next ch, sl st in last ch (the leaf base).
Gauge and Checkpoints
- Chain gauge: 8 ch = 1 in (2.5 cm) when relaxed, not stretched.
- Border gauge: 8 sc worked into chains = 1 in (2.5 cm).
- Fan gauge: One fan measures 4 in × 2 in (10.2 cm × 5.1 cm) after light blocking.
Make one fan before anything else and check it at each stage:
- After Row 2: The straight edge measures 3.25 in (8.3 cm), and each dtr is about 5/8 in (1.6 cm) tall.
- After Row 3: The fan measures 4 in × 2 in (10.2 cm × 5.1 cm).
- Each window: 3.5 in (8.9 cm) from the lower point to the upper ring, with the anchor loops 4 in (10.2 cm) apart.
- Each dove: 2.75 in × 2.25 in (7.0 cm × 5.7 cm) with the wing attached.
If your fan comes out larger than 4 in (10.2 cm), change to a 2.0 mm hook. If it comes out smaller than 3.75 in (9.5 cm), change to a 2.5 mm hook. Measure your chain gauge again after any hook change, because every swag and frame count depends on 8 ch per inch.

Part 1: Fans (Make 4, All Identical)
Work Rows 1–2 in tan.
Ring: Ch 8, sl st in first ch to form a ring.
Row 1 (RS): Ch 5 (counts as dtr), [ch 3, dtr in ring] 8 times. Keep all sts bunched on one half of the ring so the other half stays open. Turn. (9 dtr spokes, 8 ch-3 sps)
Row 2: Ch 5 (counts as dtr), [ch 5, dtr in next dtr] 8 times, working the last dtr into the top of the beginning ch-5. Fasten off tan. (9 dtr, 8 ch-5 sps)
Row 3 (ivory scallop): With RS facing, join ivory with sc in the top of the first dtr. [Shell in next ch-5 sp, sc in next dtr] 3 times. Shell in next ch-5 sp. In the next dtr, which is the center spoke, work (sc, ch 5, sc). [Shell in next ch-5 sp, sc in next dtr] 4 times. Fasten off. (66 sts: 10 sc + 8 shells × 7 sts, plus 1 ch-5 top loop)
The first and last sc of Row 3 are the fan tips. The ch-5 is the top loop.
Part 2: Dove Windows (Make 3)
Before you start, pin the four fans face up along a vertical line on your blocking board. Measure each position from the bottom edge:
- Fan 1: Turned so it opens downward. Top loop at 0 in, ring center at 2 in (5.1 cm).
- Fan 2: Opens upward. Ring at 5.5 in (14.0 cm), top loop at 7.5 in (19.1 cm).
- Fan 3: Ring at 11 in (27.9 cm), top loop at 13 in (33.0 cm).
- Fan 4: Ring at 16.5 in (41.9 cm), top loop at 18.5 in (47.0 cm).
Each window has a lower point and an upper ring:
| Window | Lower point | Upper ring |
|---|---|---|
| 1 | Open half of Fan 1’s ring | Fan 2’s ring |
| 2 | Fan 2’s top loop | Fan 3’s ring |
| 3 | Fan 3’s top loop | Fan 4’s ring |
Work every window in tan.
- Strand 1 (left, going up): Join with sl st at the lower point. Ch 22, make an anchor loop, ch 22, then sl st into the open half of the upper ring.
- Strand 2 (right, going down): Ch 22, make an anchor loop, ch 22, then sl st at the lower point.
- Strand 3 (right outer, going up): Ch 26, sl st in the right anchor loop, ch 26, then sl st in the upper ring.
- Strand 4 (left outer, going down): Ch 26, sl st in the left anchor loop, ch 26, then sl st at the lower point. Fasten off.
(Per window: 88 inner ch + 104 outer ch, 2 anchor loops)
The anchor loops sit 1.75 in (4.4 cm) above the lower point, and they belong at the 3.75 in (9.5 cm), 9.25 in (23.5 cm) and 14.75 in (37.5 cm) marks. Pin each one 2 in (5.1 cm) out from the center line. Keep the chains flat and untwisted as you work.
Part 3: Dove Body (Make 3)
Work in ivory.
Ch 14.
Rnd 1: Sc in 2nd ch from hook and in the next 11 ch. Work 3 sc in the last ch. Working along the opposite side of the foundation chain, sc in the next 11 ch, then 2 sc in the last ch. Join with sl st in the first sc. (28 sc)
Rnd 2: Ch 1. Work 2 sc in the first st, sc in the next 11 sts, 2 sc in each of the next 3 sts, sc in the next 11 sts, then 2 sc in each of the last 2 sts. Join. (34 sc)
The end where you worked 3 increases is the head end.
Rnd 3:
1. Ch 1, sc in the first 13 sts (the tail top and the back).
2. Head: Hdc in the next st, then 2 dc in each of the next 2 sts.
3. Beak: Ch 3, sl st in 2nd ch from hook, sl st in the next ch.
4. Work 2 dc in each of the next 2 sts, then hdc in the next st.
5. Sc in the next 9 sts (the belly).
6. Tail: [Ch 7, sc in 2nd ch from hook, hdc in next 2 ch, dc in next 3 ch, skip next st, sl st in next st] 3 times.
7. Join with sl st in the first sc and fasten off.
(13 sc, 10 head sts, 1 beak, 9 sc, 3 tail feathers)
Embroider an eye with a tan French knot. The body should measure 2.75 in × 1.25 in (7.0 cm × 3.2 cm) including the tail.
Part 4: Wing (Make 3)
Work in ivory.
Ch 4.
Row 1: Work 5 dc in the 4th ch from hook. Turn. (6 dc, counting the skipped ch-3 as 1 dc)
Row 2: Ch 3 (counts as dc), dc in the first st, then 2 dc in each st across. Turn. (12 dc)
Row 3 (feathers): Ch 1, sl st in the first st. [Ch 7, sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, tr in next 2 ch, skip next st, sl st in next st] 5 times. Ch 7 and work one more feather down the chain the same way, then sl st in the last st. Fasten off. (6 feathers using all 12 sts)
The wing is about 1.5 in (3.8 cm) tall.
Part 5: Leaf Sprigs
Work in sage green.
Large sprig (make 6): Ch 12. Make 1 leaf for the tip. Sl st in the next 4 stem ch. Make 2 leaves. Sl st in the next 4 stem ch. Make 2 leaves. Sl st in the last 4 stem ch and fasten off. (5 leaves; about 2 in / 5.1 cm long)
Small sprig (make 3): Ch 8. Make 1 leaf. Sl st in the next 4 stem ch. Make 2 leaves. Sl st in the last 4 stem ch and fasten off. (3 leaves; about 1.25 in / 3.2 cm long)
Make All Pieces
| Piece | Color | Quantity |
|---|---|---|
| Fans | Tan + ivory | 4 |
| Windows | Tan | 3 |
| Dove bodies | Ivory | 3 |
| Wings | Ivory | 3 |
| Large sprigs | Green | 6 |
| Small sprigs | Green | 3 |
Layout (top to bottom):
[loop] [loop]
| Fan 4 (opens up) |
| sprig Dove 3 -> sprig |
| Fan 3 (opens up) |
| sprig Dove 2 -> sprig |
| Fan 2 (opens up) |
| sprig Dove 1 -> sprig |
| Fan 1 (opens down) |
Joining: Attaching the Appliqués
Sew everything with matching thread and small whipstitches through the back loops, so no stitches show from the front.
- Wing to body: Center the wing’s foundation over back sts 6–10 of Rnd 3. Point the feathers up and toward the tail, then sew around the base for about 0.5 in (1.3 cm).
- Beak sprig: Tuck the stem end of a small sprig under the beak and tack it in 2 places, with the leaves angling up and right.
- Dove into window: Center the dove in the window, facing right. Tack it at 4 points: the top wing feather to the upper-left inner swag, the bottom tail feather to the lower-left inner swag, the tip of the beak sprig to the upper-right inner swag, and the middle of the belly to the lower-right inner swag.
- Side sprigs: Lay a large sprig along the inner swags beside each anchor loop, with the leaves fanning outward. Tack the stem in 3 places and keep the anchor loop itself clear.
Tension: Pull each tack just snug. If you can see the swag bend, it is too tight.
Checkpoint: The strip should still lie flat at 4 in × 18.5 in (10.2 cm × 47.0 cm).
Border
Border gauge is 8 sc = 1 in (2.5 cm). For counting, each corner stitch is kept separate from its sides.
Round 1 (frame): Join ivory with sc in Fan 1’s top loop at the bottom center. Then work:
- Bottom, right half: Ch 17, ch 1 (corner ch, mark it).
- Right side, going up: Ch 16, sc in Fan 1 tip, ch 14, sc in Window 1 anchor, ch 14, sc in Fan 2 tip, ch 30, sc in Window 2 anchor, ch 14, sc in Fan 3 tip, ch 30, sc in Window 3 anchor, ch 14, sc in Fan 4 tip, ch 16, ch 1 (corner).
- Top: Ch 17, sc in Fan 4’s top loop, ch 17, ch 1 (corner).
- Left side, going down: Repeat the right side in reverse order: ch 16, sc in Fan 4 tip, ch 14, sc in anchor, ch 30, sc in tip, ch 14, sc in anchor, ch 30, sc in tip, ch 14, sc in anchor, ch 14, sc in Fan 1 tip, ch 16, ch 1 (corner).
- Bottom, left half: Ch 17, sl st in the first sc.
(Long sides: 148 ch + 7 sc = 155 sts each. Short sides: 34 ch + 1 sc = 35 sts each. Plus 4 corner ch. Total 384.)
Every chain run equals its measured distance × 8 ch/in. For example, 16 ch spans the 2 in (5.1 cm) fan height, 14 ch spans 1.75 in (4.4 cm), and 30 ch spans 3.75 in (9.5 cm).
Round 2: Ch 1. Sc in each st and ch around, working 3 sc in each corner ch. Join. The middle sc of each corner group is the corner st, and the 2 sc on either side of it belong to the neighboring sides. (Long sides 157, short sides 37, plus 4 corner sts. Total 392.)
Sl st in the next 18 sts and in the corner st to reach the bottom-right corner.
Round 3 (chain link):
1. Ch 1, sc in the corner st, ch 2.
2. Each long side: Sc in the first st, then [ch 3, skip 3, sc in next st] 39 times.
3. Each short side: Sc in the first st, then [ch 3, skip 3, sc in next st] 9 times.
4. Plain corners (bottom): Ch 2, sc in corner st, ch 2.
5. Top corners: Ch 2, (sc, ch 16, sc) in corner st, ch 2.
6. Join after the bottom side with ch 2 and sl st in the first sc.
(Long sides: 40 sc + 39 ch-3 sps. Short sides: 10 sc + 9 ch-3 sps.)
Loop finish: Join ivory to each ch-16 loop. Work 24 sc into the loop, sl st in the first sc, and fasten off.
Why the math works: The link repeat uses 4 sts, plus 1 sc to close the side. Round 2 gives 157 = 1 + (4 × 39) on the long sides and 37 = 1 + (4 × 9) on the short sides. Because of that, every side starts and ends exactly at a corner. The two rounds add 3/8 in (1.0 cm) on each edge, so 4.25 in becomes 5 in (12.7 cm) and 18.5 in becomes 19.25 in (48.9 cm).
Final Blocking
- Weave in all ends along the chains in matching colors.
- Soak the strip in cool water for 10 minutes, then roll it in a towel to press out excess water.
- Pin the center line straight on your grid board.
- Pin the frame edges to 5 in (12.7 cm) wide and 19.25 in (48.9 cm) long.
- Put a pin in every fan ring and anchor loop at the measured marks.
- Open each shell scallop with a pin tip.
- Mist with starch if you want a crisp hanging strip.
- Dry completely, which takes at least 12 hours, before unpinning.
Final Quality-Control Checklist
- All 4 fans have 9 spokes, 8 shells and 1 top loop.
- Each window has 4 untwisted strands and 2 anchor loops.
- All 3 doves face right, with the wing on the back and the tail at the lower left.
- There are 9 sprigs in place: 2 at the sides of each window and 1 in each beak.
- The link round has 39 links on each long side and 9 on each short side.
- The hanging loops are equal in size and centered over the corners.
- The strip measures 5 in × 19.25 in (12.7 cm × 48.9 cm) and lies flat.
Troubleshooting
- Fans ruffle: Work the shells as (hdc, 4 dc, hdc) and keep your gauge.
- Fans cup: Your hook is too small. Go up 0.25 mm.
- Swags sag below the anchors: Shorten the outer strands to ch 24.
- The frame puckers: Your Round 1 chains are too tight. Chain on a hook 0.25 mm larger.
- The link round doesn’t land at the corner: Recount Round 2 against 157 and 37.
- Doves curl: Steam-block them flat before sewing them on.
- The loops stretch: Add 2 more sc to the loop finish so the sc are packed tightly.
Care
Hand wash in cool water with mild soap, then pin flat to dry on a towel. Store the strip flat or loosely rolled so the scallops don’t crush.

Final Notes
The measurement chain runs like this:
- One fan measures 4 in × 2 in (10.2 cm × 5.1 cm).
- The windows span 3.5 in (8.9 cm) each.
- Together they make a 4 in × 18.5 in (10.2 cm × 47.0 cm) column.
- Round 1 frames it to 4.25 in × 18.5 in (10.8 cm × 47.0 cm).
- Rounds 2–3 bring it to 5 in × 19.25 in (12.7 cm × 48.9 cm).
- With the loops, the total length is 20.25 in (51.4 cm).
If your gauge matches at each checkpoint, every count falls into place.
Happy crocheting!