This hanging holder stacks three little crown baskets on two flat straps and finishes with a wooden ring at the top. Each basket holds one standard toilet roll. The whole piece hangs from a single hook, so it works well in small bathrooms.
The design uses one soft peach cotton-blend yarn. The crown edge has two layers. A lower row of ribbed, pointed shell fans sits against the wall, and a taller row of pointed spires rises behind them, placed between the fans, with small open windows in between. The base and wall are dense single crochet, so the baskets are pretty but sturdy.
All instructions use US crochet terms. Each basket measures about 5.75 in (14.6 cm) across and 4 in (10.2 cm) tall. The finished holder is about 24.5 in (62.2 cm) tall from the top of the ring to the bottom basket.
You crochet a flat circle, turn the wall up with a back-loop round and work the two-layer crown. Repeat for three baskets. Then make and edge two straps, sew the baskets to them and fold the strap ends around the ring.
Finished Size and Construction
- Finished size: about 24.5 in (62.2 cm) tall x 5.75 in (14.6 cm) wide
- Skill level: Easy intermediate
- Terminology: US crochet terms
- Yarn weight: Bulky (#5) cotton or cotton blend
- Hook: 5.5 mm (US I-9)
- Number of pieces: 3 baskets, 2 straps, 1 wooden ring
- Layout: 3 baskets stacked in 1 vertical column
- Piece size: each basket 5.75 in (14.6 cm) across x 4 in (10.2 cm) tall
- Strap size before border: 1.25 in (3.2 cm) x 24 in (61.0 cm)
- Border depth: about 1/8 in (0.3 cm) per edge; the edged strap is 1.5 in (3.8 cm) x 24.25 in (61.6 cm)
Materials
Choose a bulky cotton or cotton blend that shows stitches clearly and stretches very little. Pure acrylic will sag under the weight of the rolls. A yarn with about 130 m per 100 g is ideal.
- Peach (only color): 300 g, about 390 m
- each basket uses about 55 g (about 72 m)
- each strap uses about 30 g (about 39 m)
- 5.5 mm (US I-9) crochet hook
- 1 wooden ring, 3 in (7.6 cm) outer diameter
- Stitch markers (at least 4)
- Tapestry needle, scissors, measuring tape
- Pins and a blocking mat or folded towel
These amounts include a margin of about 20 percent for gauge differences.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet
- inc – 2 sc in the same stitch
- MR – magic ring
- BLO / FLO – back loop only / front loop only
- sk – skip
- sp – space
Special stitches
- Pointed Shell (PS): (2 dc, tr, ch 2, tr, 2 dc) all in the same stitch. Counts as 6 stitches plus a ch-2 tip.
- Tall Point (TP): (2 dc, 2 tr, ch 3, 2 tr, 2 dc) all in the same stitch. Counts as 8 stitches plus a ch-3 tip.
Gauge and Checkpoints
Gauge: 13 sc and 14 rounds = 4 in (10.2 cm), in sc worked in the round.
Make one complete basket first. It is your real gauge swatch, and every later measurement depends on it.
- After Rnd 5 (30 sts): the circle is about 3 in (7.6 cm) across.
- After Rnd 10 (60 sts): the base is 5.75 in (14.6 cm) across.
- After Rnd 14: the solid wall is about 1.125 in (2.9 cm) tall above the base ridge.
- After Rnd 18: the basket is about 4 in (10.2 cm) tall to the spire tips.
- Strap: 4 sts = 1.25 in (3.2 cm) wide; 7 rows = 2 in (5.1 cm).
If your base is bigger than 5.75 in (14.6 cm), go down half a hook size. If it is smaller, go up half a size. The base must lie completely flat before you start the wall.
The strap has 3.5 rows per inch, the same as the 3.5 rounds per inch in the basket wall. That is why you can sew one strap row to each wall round.

Basket (make 3)
Base
Work in joined rounds: join with a sl st at the end of each round. The ch 1 at the start of a round does not count as a stitch.
Rnd 1: In MR, ch 1, 6 sc. Join. (6)
Rnd 2: Ch 1, inc in each st around. Join. (12)
Rnd 3: Ch 1, sc, inc 6 times. Join. (18)
Rnd 4: Ch 1, sc in next 2, inc 6 times. Join. (24)
Rnd 5: Ch 1, sc in next 3, inc 6 times. Join. (30)
Rnd 6: Ch 1, sc in next 4, inc 6 times. Join. (36)
Rnd 7: Ch 1, sc in next 5, inc 6 times. Join. (42)
Rnd 8: Ch 1, sc in next 6, inc 6 times. Join. (48)
Rnd 9: Ch 1, sc in next 7, inc 6 times. Join. (54)
Rnd 10: Ch 1, sc in next 8, inc 6 times. Join. (60)
Tip: on even rounds, move the increase to the middle of each repeat. This keeps the circle round instead of turning it into a hexagon. The stitch count stays the same.
Wall
Rnd 11 (turning round): Ch 1, sc in BLO of each st around. Join. (60)
This round makes a crisp ridge and turns the wall up.
Rnds 12–14: Ch 1, sc in each st around. Join. (60 each round)
Place a marker in st 1 and another in st 31. They mark where the straps go.
Rnd 15: Ch 2 (does not count), dc in each st around. Join to first dc. (60 dc)
Crown, Lower Layer
Split the 60 stitches into 10 repeats of 6 stitches. In each repeat, st 1 holds a sc and st 4 holds a shell.
Rnd 16 (FLO of Rnd 15): Ch 1, sc in FLO of next st, sk 2 sts, PS in FLO of next st, sk 2 sts 10 times. Join to first sc.
Count: 10 sc + 10 PS = 70 sts (10 + 60), plus 10 ch-2 tips. These shells lie against the front of the basket.
Crown, Upper Layer
Rnd 17 (BLO of Rnd 15): Insert your hook in the free back loop of Rnd 15 st 1, directly behind the first sc. Ch 5 (counts as dc + ch 2), sk 2 sts, dc in BLO of next st, ch 2 19 times, sk last 2 sts. Join to 3rd ch of beginning ch-5.
Count: 20 dc and 20 ch-2 sps. The dc land on sts 1 and 4 of every repeat. The ch-2 spaces make the open windows.
Rnd 18: Sl st in next 2 ch, then sl st in next dc (the dc above st 4). Ch 1, sc in this dc, sk ch-2 sp, TP in next dc (above st 1), sk ch-2 sp 10 times. The 10th TP goes into the beginning ch-5. Join to first sc.
Count: 10 sc + 10 TP = 90 sts (10 + 80), plus 10 ch-3 tips.
Each 8-stitch TP spreads across a 6-stitch span, so the points flare and stand upright. Each spire sits above st 1 of its repeat, halfway between two lower shells. Fasten off and weave in ends.
Strap (make 2)
Row 1: Ch 5, sc in 2nd ch from hook and in each ch across. Turn. (4)
Rows 2–84: Ch 1, sc in each st across. Turn. (4 each row)
Checkpoint: the strap is 1.25 in (3.2 cm) wide and 24 in (61.0 cm) long (84 rows ÷ 3.5 rows per inch). Don’t fasten off. Go straight on to the Border section and edge the strap before joining.
Make All Pieces
Everything is peach:
- 3 baskets, about 165 g total
- 2 straps, about 60 g total
- 1 wooden ring
Layout (front view):
[ RING ]
/ \
Strap A Strap B
| rows 35–38 |
[ Basket 1, top ]
| rows 18–21 |
[ Basket 2, middle ]
| rows 1–4 |
[ Basket 3, bottom ]
The baskets are 17 strap rows apart, about 4.875 in (12.4 cm) from base to base. Each basket is 4 in (10.2 cm) tall, so there is just under 1 in (2.5 cm) of space above each row of spires.
Joining
Use a tapestry needle and a long tail of the same yarn. Whipstitch keeps the seam flat.
Stitch-to-stitch logic: the strap is 4 sts wide and covers 4 wall stitches. Strap A covers sts 59, 60, 1 and 2, centered on the st 1 marker. Strap B covers sts 29, 30, 31 and 32, centered on the st 31 marker. The straps are exactly 30 sts apart, on opposite sides of the basket.
Strap row 1 lies on Rnd 11, row 2 on Rnd 12, row 3 on Rnd 13 and row 4 on Rnd 14.
- Lay the strap on the outside of Basket 3. Whipstitch the bottom edge of row 1 along the Rnd 11 ridge, across its 4 stitches.
- Whipstitch both long strap edges to the wall, one stitch per row-end. Catch sts 59 and 2 (or 29 and 32) of the matching round.
- Tack strap row 6 to the Rnd 16 sc at st 1 (or st 31) so the strap stays against the crown.
- Repeat on Basket 2 with strap rows 18–21 (tack at row 23), and on Basket 1 with rows 35–38 (tack at row 40).
- Sew Strap B on the opposite side the same way.
Tension: pull each stitch snug but not tight. If the seam puckers the wall, it is too tight and the basket will tilt.
Ring: pass rows 78–84 of each strap through the ring from front to back. Fold the last 2 in (5.1 cm) down behind the strap and whipstitch the end row flat. Fold both straps by exactly the same number of rows.
Size checkpoint: hang the holder. All three baskets should sit level, and the holder should measure about 24.5 in (62.2 cm) from the top of the ring to the bottom basket.
Border
The border is a slip stitch edging on each strap. It firms the edges, stops curling and gives a neat chain line down each side. Work it before joining, carrying on from the last row of the strap.
Border gauge: 1 sl st per row-end on the long sides and 1 sl st per stitch on the short ends.
Border Rnd 1: Ch 1 for the corner (not counted). Working down the first long side, sl st in each row-end. (84 sl sts) Ch 1 at the corner. Sl st in each foundation stitch across the short end. (4 sl sts) Ch 1 at the corner. Sl st in each row-end up the second long side. (84 sl sts) Ch 1 at the corner. Sl st in each stitch across the last row. (4 sl sts) Join to the first sl st.
Total: 176 sl sts (84 + 4 + 84 + 4), plus 4 corner ch-1.
Why the math works: each long side has exactly 84 rows, so 84 sl sts add no extra fabric and the strap won’t ruffle. Each short end has 4 sts and gets 4 sl sts. The corner chains turn the edge without counting as stitches, so no stitch is counted twice. The edging adds about 1/8 in (0.3 cm) to each edge, so the strap measures 1.5 in (3.8 cm) x 24.25 in (61.6 cm). Fasten off and weave in ends.
Final Blocking
- Lightly mist each basket until it is damp, not soaked.
- Put a toilet roll or a jar about 4.5 in (11.4 cm) wide inside each basket to shape the wall.
- Press the lower shells against the wall and pinch each ch-2 tip into a point.
- Pull each TP upward and pinch its ch-3 tip into a sharp spire. Pin to a foam block if needed.
- Pin the straps flat to 1.5 in (3.8 cm) wide.
- Let everything dry completely, about 24 hours, before hanging.
Final Quality-Control Checklist
- Each base lies flat and measures 5.75 in (14.6 cm).
- The Rnd 11 ridge shows all the way around.
- Each basket has 10 lower shells and 10 spires, offset from each other.
- Rnd 17 shows 20 open windows.
- Both straps have 84 rows and match in length.
- The straps are centered on sts 1 and 31 of every basket.
- All three baskets hang level.
- Both ring folds are equal and secure.
- All ends are woven in and hidden inside the baskets.
Troubleshooting
The base cups like a bowl: your stitches are too tight. Go up a hook size, and check that you made 6 increases in every round.
The base ruffles: your stitches are too loose. Go down half a hook size.
The spires flop over: use a firmer cotton, block with light spray starch, or work Rnd 18 with a 5 mm hook.
Wrong number of shells: recount Rnd 15. It must have exactly 60 dc.
The baskets tilt: the straps are off-center. Recheck the 30-stitch spacing.
The holder twists: one strap is longer. Count the rows and refold the ring end to match.
Care
Hand wash in cool water with mild soap, press out the water in a towel, then reshape and dry flat. Don’t tumble dry, or the spires may lose their shape.

Final Notes
The whole holder rests on one chain of measurements. A gauge of 13 sc and 14 rounds per 4 in (10.2 cm) gives a 60-stitch base of 5.75 in (14.6 cm). Those 60 stitches split into 10 crown repeats of 6, which gives 70 stitches in the shell round and 90 in the spire round. Because the strap and wall gauges match, 4 strap rows sit on 4 wall rounds. The 84 strap rows give 24 in (61.0 cm), enough to space three 4 in (10.2 cm) baskets below a 3 in (7.6 cm) ring for a finished length of about 24.5 in (62.2 cm).
Happy crocheting!