This heart-shaped wall pocket hangs on a hook and holds small things like a comb, a hairbrush, or hair clips. It has three pieces: a cream lace heart at the back, a lace triangle at the front that forms the pocket, and a pink loop for hanging.
The lace is rows of 7-double-crochet fans worked over V-stitch mesh, which leaves round eyelets between the shells. Each piece is edged in pink, with a single crochet round followed by a rope-like reverse single crochet round.
This pattern uses US crochet terms. The finished pocket measures 9 in (22.9 cm) wide and 8.5 in (21.6 cm) tall, not counting the loop.
The heart is worked in rows from the bottom point and splits into two lobes at the top. The pocket is the same as Rows 1–13 of the heart. Both pieces get a pink sc round. The last reverse sc round joins the pocket to the back. Then you sew on the loop.
Finished Size and Construction
- Finished size: 9 in (22.9 cm) x 8.5 in (21.6 cm), plus the loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK / light worsted cotton (weight 3)
- Hook: 3.5 mm (E-4)
- Number of pieces: 3 (back heart, front pocket, hanging loop)
- Layout: the pocket covers the lower back; the loop rises from the center dip
- Back heart before border: 8.25 in (21.0 cm) x 7.75 in (19.7 cm)
- Pocket before border: 7.25 in (18.4 cm) x 4.25 in (10.8 cm)
- Border depth: 0.375 in (1.0 cm)
Materials
Use a smooth mercerized or combed cotton. Cotton holds the fan shapes, blocks crisply, and doesn’t stretch when the pocket is full. Avoid fuzzy yarns, because they fill in the eyelets.
- Cream (main): 45 g, about 104 m
- Pink (border and loop): 20 g, about 46 m
Tools:
- 3.5 mm (E-4) hook
- Tapestry needle and scissors
- 4 stitch markers
- Rust-proof pins, a blocking mat, and a spray bottle
Both yarn amounts include about a 20% margin.
Abbreviations (US Terms)
- ch: chain
- sc: single crochet
- dc: double crochet
- sl st: slip stitch
- rev sc: reverse single crochet (crab stitch)
- st(s): stitch(es)
- sp: space
- t-ch: turning chain
- rep: repeat
- RS / WS: right side / wrong side
Special stitches
- V-st: (dc, ch 3, dc) in the same stitch.
- Fan: 7 dc in the same space.
- Rev sc: Work left to right (if you’re right-handed). Insert the hook in the next stitch to the right, yarn over and pull up a loop, then yarn over and pull through both loops.
Gauge and Checkpoints
The pocket and the back have to line up row for row, so gauge matters. Make the pocket first, since it’s the same as Rows 1–13 of the back and works as a gauge swatch.
- Lace: 1 fan repeat (fan + sc) = 1 in (2.5 cm) wide
- Border: 5 sc = 1 in (2.5 cm)
Measure flat, without stretching:
- Row 3 (2 fans): 2.25 in (5.7 cm) wide
- Row 7 (4 fans): 4.25 in (10.8 cm) wide
- Row 11 (6 fans): 6.25 in (15.9 cm) wide
- Row 13 (7 fans): 7.25 in (18.4 cm) wide, 4.25 in (10.8 cm) tall
- Row 15 (8 fans): 8.25 in (21.0 cm) wide, 5 in (12.7 cm) tall
- Row 23: 7.75 in (19.7 cm) tall
If Row 7 measures more than 4.5 in (11.4 cm), go down a hook size. If it measures less than 4 in (10.2 cm), go up a size. Don’t change the fan size.

Back Heart
Use cream. Turn at the end of every row. A beginning ch-3 counts as a dc. A ch-5 counts as a dc plus ch 2.
Row 1 (RS): Ch 4, 6 dc in 4th ch from hook. Turn. (7 dc = 1 fan; this is the bottom point)
Row 2: Ch 3, (ch 3, dc) in first st, ch 2, sc in 4th (center) dc, ch 2, V-st in top of t-ch. Turn. (2 V-sts, 1 sc)
Row 3: Ch 3, 7 dc in first V-st sp, sc in next sc, 7 dc in next V-st sp, dc in 3rd ch of t-ch. Turn. (17 sts: 2 fans)
Row 4 (mesh row): Ch 3, (ch 3, dc) in first st, ch 2, sc in center dc of next fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * across, ch 2, V-st in 3rd ch of t-ch. Turn. (3 V-sts, 2 sc)
Row 5 (fan row): Ch 3, 7 dc in first V-st sp, *sc in next sc, 7 dc in next V-st sp; rep from * across, dc in 3rd ch of t-ch. Turn. (25 sts: 3 fans)
Each mesh row adds one V-st, so the next fan row has one more fan. A fan row with n fans has 8n + 1 stitches: 7n fan dc, n – 1 sc between fans, and 2 edge dc.
Rows 6–15: Repeat Rows 4–5 five more times.
- Row 7: 33 sts (4 fans)
- Row 9: 41 sts (5 fans)
- Row 11: 49 sts (6 fans)
- Row 13: 57 sts (7 fans)
- Row 14: 8 V-sts, 7 sc
- Row 15: 65 sts (8 fans)
Put a marker in the 4th sc of Row 15. This center sc is where the heart dips.
First Lobe
Row 16: Ch 3, (ch 3, dc) in first st, ch 2, sc in center dc of next fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * 2 more times, ch 2, dc in marked sc. Turn. (4 V-sts, 4 sc)
Row 17: Ch 1, sc in first dc, sc in next sc, *7 dc in next V-st sp, sc in next sc; rep from * 2 more times, 7 dc in last V-st sp, dc in 3rd ch of t-ch. Turn. (34 sts: 4 fans)
Row 18: Ch 5, sc in center dc of first fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * 2 more times, ch 2, skip next sc, dc in last sc. Turn. (3 V-sts, 4 sc)
Row 19: Ch 1, sc in first dc, sc in next sc, *7 dc in next V-st sp, sc in next sc; rep from * 2 more times, sc in 3rd ch of t-ch. Turn. (27 sts: 3 fans)
Row 20: Ch 5, skip next sc, sc in center dc of first fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * once more, ch 2, skip next sc, dc in last sc. Turn. (2 V-sts, 3 sc)
Row 21: Ch 1, sc in first dc, sc in next sc, *7 dc in next V-st sp, sc in next sc; rep from * once more, sc in 3rd ch of t-ch. Turn. (19 sts: 2 fans)
Row 22: Ch 5, skip next sc, sc in center dc of first fan, ch 2, V-st in next sc, ch 2, sc in center dc of next fan, ch 2, skip next sc, dc in last sc. Turn. (1 V-st, 2 sc)
Row 23: Ch 1, sc in first dc, sc in next sc, 9 dc in V-st sp, sc in next sc, sc in 3rd ch of t-ch. (13 sts) Fasten off. The 9-dc fan rounds off the top of the lobe.
Second Lobe
Row 16b: With the same side facing as for Row 16, join cream in the marked sc. Ch 5, sc in center dc of next fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * 2 more times, ch 2, V-st in top of t-ch. Turn. (4 V-sts, 4 sc)
Row 17b: Ch 3, 7 dc in first V-st sp, *sc in next sc, 7 dc in next V-st sp; rep from * 2 more times, sc in next sc, sc in 3rd ch of t-ch. Turn. (34 sts)
Row 18b: Ch 5, skip next sc, sc in center dc of first fan, *ch 2, V-st in next sc, ch 2, sc in center dc of next fan; rep from * 2 more times, ch 2, dc in top of t-ch. Turn. (3 V-sts, 4 sc)
Rows 19b–23b: Work as Rows 19–23. (27, 19, 13 sts) Fasten off.
The two anchor stitches share the center sc, which forms a clean V at the dip.
Front Pocket
Use cream. Work Rows 1–13 of the Back Heart (57 sts, 7 fans), then fasten off. Check that it measures 7.25 in (18.4 cm) x 4.25 in (10.8 cm).
Hanging Loop
Use pink. Ch 36.
Row 1: Sc in 2nd ch from hook and each ch across. (35 sc)
Row 2: Ch 1, rotate, sl st in each free loop of the foundation. (35 sl st) Fasten off, leaving a 10 in (25.4 cm) tail.
The cord measures 7 in (17.8 cm). Fold the first 12 sts (2.4 in / 6.1 cm) into a teardrop and sew the tip to st 13. That leaves a 23-st stem, 4.6 in (11.7 cm) long.
Make All Pieces
- Back heart: 1 (cream, pink border)
- Front pocket: 1 (cream, pink border)
- Hanging loop: 1 (pink)
[loop]
|
(lobe) V (lobe) back Rows 16-23
| back Rows 14-15 |
\ pocket over / back Rows 1-13
\ Rows 1-13 /
\ /
\/ shared point
Border
Border gauge is 5 sc = 1 in (2.5 cm). Every row-end is dc or fan height, about 0.42 in (1.1 cm) along the slant, so work 2 sc in each row-end.
Pocket, Round 1
With RS facing, join pink at the point.
Rnd 1: Ch 1, 3 sc in the point. Work 2 sc in each row-end of Rows 1–13 (26 sc). Across the top: 3 sc in the edge dc, *sc in the 1st, 3rd, 5th, and 7th dc of the next fan, sc in next sc; rep from * 5 more times, sc in the 1st, 3rd, 5th, and 7th dc of the last fan, 3 sc in the last dc. Work 26 sc down the other side. Sl st to first sc. (95 sc: 3 + 26 + 40 + 26)
The top’s 40 sc are 36 working sts (2 edge + 28 fan + 6 between) plus 2 extra at each corner. Those 36 sc come to 7.2 in (18.3 cm), which matches the 7.25 in (18.4 cm) Row 13, so the top lies flat.
Pocket top: With RS facing, join pink in the first sc of a top corner. Rev sc across the 40 top sts. Fasten off. Leave the side and point sts open for joining.
Back, Round 1
With RS facing, join pink at the point.
Rnd 1: Ch 1, 3 sc in the point. Work 30 sc up Rows 1–15 and 16 sc up the outer edge of the lobe (Rows 16–23). Across Row 23: sc in first sc, skip next sc, sc in the 1st, 3rd, 5th, 7th, and 9th dc, skip next sc, sc in last sc (7 sc). Work 16 sc down the inner edge, then 1 sc in the dip. Mirror this on the second lobe: 16, 7, 16, then 30 sc down to the point. Sl st to first sc. (142 sc)
Check: 3 + 30 + 16 + 7 + 16 + 1 + 16 + 7 + 16 + 30 = 142.
Joining
Lay the back RS up. Place the pocket on top, also RS up, with the points stacked. The pocket’s 3 point sc should sit on the back’s 3 point sc, and each 26-sc pocket side should sit on the back’s Rows 1–13 sc. Pin at the point, the corners, and the middle of each side.
Rnd 2: Join pink through both layers at one top corner of the pocket. Rev sc through both layers in each stacked pair: 26 down, 3 around the point, and 26 up (55 joined sts). Continue the rev sc through the back only for the remaining 87 sts, around both lobes. Sl st to join and fasten off. (142 rev sc)
This works because both pieces have 2 sc per row-end on Rows 1–13, so the stitches pair up one-to-one: 142 – 55 = 87.
Keep the tension relaxed and even. If it’s too tight, the opening pulls shut. If it’s too loose, the edge goes floppy. Check that the piece measures 9 in (22.9 cm) x 8.5 in (21.6 cm).
Loop: Sew the last 0.75 in (1.9 cm) of the stem to the WS of the back at the dip, stitching through the border and the anchor stitches. That leaves 3.85 in (9.8 cm) of stem showing.
Final Blocking
- Weave in the ends along same-color stitches.
- Soak for 10 minutes, then press out the water in a towel.
- Lay the piece flat, RS up.
- Pin the widest points 9 in (22.9 cm) apart, and pin the lobe tops 8.5 in (21.6 cm) above the point.
- Pin out each fan’s crown so the eyelets open.
- Slide a folded piece of plastic into the pocket so the layers don’t stick together.
- Let it dry completely, at least 24 hours.
Final Quality-Control Checklist
- Back Rnd 1: 142 sc, with a clean V at the dip
- Pocket Rnd 1: 95 sc, with a flat top
- 55 joined rev sc, with no gaps at the corners
- Both lobes the same height
- Loop centered and firmly sewn
- Finished size: 9 in (22.9 cm) x 8.5 in (21.6 cm)
Troubleshooting
- Pocket is wider than the back: Your gauge drifted. Compare Row 7 on both pieces and remake the one that’s off.
- Pocket top ruffles: Work only into the 1st, 3rd, 5th, and 7th dc of each fan.
- Lower sides cup: The border puts 6 in (15.2 cm) of sc along a 6.25 in (15.9 cm) edge. Block more firmly, or work Rnd 1 with a hook one size larger.
- Lobes lean: Make sure both anchor stitches went into the marked center sc.
- Loop stretches: Sew the stem through two layers of the border.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat with the fans reshaped. Don’t hang the pocket up while it’s wet.

Final Notes
All the measurements follow from the fan gauge of 1 in (2.5 cm) per repeat. That makes Row 13 measure 7.25 in (18.4 cm) on both pieces. The back reaches 8.25 in (21.0 cm) wide at Row 15 and 7.75 in (19.7 cm) tall at Row 23. Working 2 sc per row-end on both pieces gives 55 joining stitches that pair up exactly. The 0.375 in (1.0 cm) border brings the finished size to 9 in (22.9 cm) x 8.5 in (21.6 cm).
Happy crocheting!