The Royal Weave Ball Ornament is a round, stuffed Christmas bauble covered in a deep basketweave texture. Raised blocks of vertical stitch columns alternate with recessed blocks of horizontal ridges, so the surface looks like woven strips of cord.
The sample is worked in a rich royal blue cotton. A cream slip-stitch cord forms the hanging loop, and a sage green cord is tied in a small bow at the top. The same design works well in rust, cream, chocolate brown or sage, each finished with a contrasting bow. This pattern uses US crochet terms throughout.
The finished ornament measures about 3 in (7.6 cm) across. With the hanging loop it stands about 5.5 in (14.0 cm) tall.
Construction is simple. You crochet one flat rectangle in front post and back post double crochet, add a single crochet border, and block it. You then seam the short ends into a tube, gather the bottom closed, stuff it, gather the top, and finish with the loop and the bow.
Finished Size and Construction
- Finished size: about 3 in (7.6 cm) diameter; about 5.5 in (14.0 cm) tall including loop
- Skill level: Easy intermediate (post stitches, simple seaming)
- Terminology: US crochet terms
- Yarn weight: worsted (#4), cotton or cotton blend
- Hook: 4 mm (US G-6)
- Number of pieces: 1 main body panel, plus 2 small cords (loop and bow)
- Layout: single flat panel, seamed into a tube and gathered at both ends
- Panel size before border: 8.5 in x 5.2 in (21.6 cm x 13.2 cm)
- Border depth: 1/4 in (0.6 cm) on every side
- Panel size after border: 9.0 in x 5.7 in (22.9 cm x 14.5 cm)
Materials
Choose a smooth, tightly plied worsted cotton or cotton blend. Plied cotton gives the crisp, rope-like stitch definition that makes the weave stand out. Avoid fuzzy or very soft acrylic, which blurs the blocks.
- Main color (MC), royal blue: 20 g, about 36 m (39 yd)
- Color A (loop), cream: 3 g, about 5 m (5.5 yd)
- Color B (bow), sage green: 3 g, about 5 m (5.5 yd)
Tools:
- 4 mm (US G-6) crochet hook
- Tapestry needle
- About 10 g polyester fiberfill
- Scissors
- Stitch markers (2)
- Ruler or measuring tape
- Pins and a blocking mat or folded towel
All quantities include a margin of roughly 20 percent for your gauge swatch and for tension differences.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- RS / WS – right side / wrong side
- FPdc – front post double crochet
- BPdc – back post double crochet
Special stitches
- FPdc: Yarn over, insert the hook from front to back to front around the post of the next st, yarn over and pull up a loop, (yarn over, pull through 2 loops) twice.
- BPdc: Yarn over, insert the hook from back to front to back around the post of the next st, yarn over and pull up a loop, (yarn over, pull through 2 loops) twice.
- Back-bump sl st cord: Chain the stated number, then sl st into the back bump of the 2nd ch from the hook and of each ch across.
The beginning ch-2 never counts as a stitch in this pattern.
Gauge and Checkpoints
Gauge: 16 sts and 10 rows = 4 in (10.2 cm) in basketweave pattern, after blocking.
One block (4 sts x 3 rows) measures 1 in (2.5 cm) wide and 1.2 in (3.0 cm) tall.
Because this ornament is one piece, the panel itself is your test piece. Measure at each checkpoint and adjust early:
- After Row 1: 34 dc = 8.5 in (21.6 cm) wide.
- After Row 4: panel is 1.6 in (4.1 cm) tall.
- After Row 7: panel is 2.8 in (7.1 cm) tall.
- After Row 13: panel is 8.5 in x 5.2 in (21.6 cm x 13.2 cm).
- After border: panel is 9.0 in x 5.7 in (22.9 cm x 14.5 cm).
A tolerance of 1/4 in (0.6 cm) in either direction is fine.
If your panel is too big, go down 0.5 mm in hook size and restart. Post stitches stretch, so a loose panel will make a soft, lumpy ball.
If your panel is too small, go up 0.5 mm in hook size. A small panel still makes an ornament, but it will be tighter and slightly smaller.

Body Panel
With MC, ch 36.
Row 1 (RS): Dc in 3rd ch from hook and in each ch across, turn. (34 dc)
The two skipped chains do not count. You now have 1 edge st, 32 pattern sts and 1 edge st.
Band A (Rows 2–4)
Row 2 (WS): Ch 2, dc in first st, BPdc in next 4 sts, FPdc in next 4 sts; rep from * 3 more times, dc in last st, turn. (34 sts: 2 dc, 16 BPdc, 16 FPdc)*
Row 3 (RS): Ch 2, dc in first st, BPdc in next 4 sts, FPdc in next 4 sts; rep from * 3 more times, dc in last st, turn. (34 sts)*
Row 4 (WS): Rep Row 3. (34 sts)
Why the same sequence works on both sides: the 32 pattern sts are exactly 4 repeats of 8. When you turn, the sequence reverses end to end. A BPdc worked on the WS pushes its post to the RS, so the same 4 columns stay raised on the RS in every row of the band. On the RS you now see 4 raised blocks (vertical columns) alternating with 4 recessed blocks (horizontal ridges).
Band B (Rows 5–7)
Row 5 (RS): Ch 2, dc in first st, FPdc in next 4 sts, BPdc in next 4 sts; rep from * 3 more times, dc in last st, turn. (34 sts)*
Rows 6–7: Rep Row 5. (34 sts each row)
Each block has now swapped: the sts above a raised block are recessed, and the sts above a recessed block are raised. That swap creates the woven checkerboard.
Bands A and B Repeated (Rows 8–13)
Rows 8–10: Work as Row 3. (34 sts each row)
Rows 11–13: Work as Row 5. (34 sts each row)
Do not fasten off. The panel now has 13 rows: 1 foundation row and 4 bands of 3 rows each. That gives 8 blocks across and 4 blocks up, which is 32 blocks in total.
Checkpoint: 8.5 in x 5.2 in (21.6 cm x 13.2 cm).
Border
Border gauge: 2 sc per dc row-end, and 1 sc per st along the top and bottom edges. A single round of sc adds 1/4 in (0.6 cm) on each side.
Round 1 (RS): Ch 1. Working across the top of Row 13: 3 sc in first st, sc in each of next 32 sts, 3 sc in last st. Rotate. Work 2 sc in each row-end down the side (13 row-ends, 26 sc). Rotate. Working along the bottom of the foundation chain: 3 sc in first ch, sc in each of next 32 ch, 3 sc in last ch. Rotate. Work 2 sc in each row-end up the second side (26 sc). Join with sl st to first sc. Fasten off, leaving a 16 in (40.6 cm) tail for seaming.
Round 1 count: 128 sc.
As a conversion round, that total is made up like this:
- 68 sc worked 1 per existing st (34 along the top + 34 along the foundation chain)
- 8 extra corner sc (2 added at each of the 4 corners)
- 52 sc worked into row-ends (26 per short side)
68 + 8 + 52 = 128.
Per side, counted corner to corner including both corner sts:
- Long sides (top and bottom): 1 corner + 34 + 1 corner = 36 sc each
- Short sides: 1 corner + 1 + 26 + 1 + 1 corner = 30 sc each
Each corner st is shared by two sides, so 36 + 36 + 30 + 30 − 4 = 128. This matches the round total.
Why the math works: Along the long edges there is one sc for every panel st, so the edge stays the same width as the panel. Along the short edges, 2 sc per dc row-end matches the height of a dc row, which is roughly twice that of an sc row, so the edge lies flat without ruffling or cupping. The 3-sc corners turn the edge cleanly. Both short sides have exactly 30 sc, so they line up stitch for stitch when you seam them.
Final Blocking and Assembly
Block the Flat Panel
- Mist the panel with water until it is evenly damp, or soak it briefly and roll it in a towel.
- Pin it RS up to 9.0 in x 5.7 in (22.9 cm x 14.5 cm).
- Square up the blocks with your fingers so the raised columns stand straight and the recessed ridges lie level.
- Let the panel dry completely before you remove the pins.
Seam the Tube
- Fold the panel RS out so the two short sides meet.
- With the long tail, whipstitch the short sides together through the back loops only, matching sc to sc: corner to corner, then all 30 sts. The seam runs top to bottom.
- Check the weave across the seam. The last block of each band should sit next to the first block of the same band in the opposite texture, so the checkerboard continues all the way around.
The circumference of the tube is now about 8.75 in (22.2 cm).
Gather, Stuff and Close
- Thread a 12 in (30.5 cm) length of MC. Weave it in and out through every sc along the bottom long edge (36 sts). Pull it tight to close the opening, knot it, and weave in the end.
- Turn the tube so the closed end is down. Stuff firmly with fiberfill, adding small tufts at a time and pushing them into the sides to round the shape.
- Gather the top long edge in the same way as the bottom. Add a final tuft of stuffing just before closing. Pull it tight, knot it, and leave the tail inside the ball.
- Roll the ball between your palms to even out the stuffing. It should measure about 3 in (7.6 cm) across.
Hanging Loop
With Color A, ch 31. Work a back-bump sl st cord across. (30 sl sts; about 5 in / 12.7 cm)
Fold the cord in half. Sew both ends to the top gather to form a loop about 2.5 in (6.4 cm) tall.
Bow
With Color B, ch 50. Work a back-bump sl st cord across. (49 sl sts; about 8 in / 20.3 cm)
Tie the cord in a bow with loops about 1 in (2.5 cm) wide, keeping the knot snug. Sew the knot over the base of the hanging loop so it covers the gather. Let the tails rest down the sides of the ball.
Final Quality-Control Checklist
- Every row has 34 sts.
- Blocks are 4 sts wide and 3 rows tall, with 8 across and 4 up.
- Raised and recessed blocks alternate cleanly, including across the seam.
- Round 1 of the border has 128 sc: 36 per long side and 30 per short side.
- The blocked panel measured 9.0 in x 5.7 in (22.9 cm x 14.5 cm).
- Both gathers are fully closed with no holes.
- The ball is about 3 in (7.6 cm) across and firm, with no flat spots.
- The loop is centered and about 2.5 in (6.4 cm) tall.
- The bow is secure and covers the top gather.
- All ends are woven in and hidden.
Troubleshooting
Blocks look blurred or uneven. You have probably worked an FPdc where a BPdc belongs. Look at the post below your hook: if it bulges toward you, work FP; if it sits away from you, work BP.
Panel is narrowing. Check that you work a plain dc into both the first and last st of every row. These edge sts are easy to skip.
Short edges ruffle. Use 2 sc per row-end, not 3. If they cup, check that you did not drop to 1 sc per row-end.
Seam shows a gap. Whipstitch through the back loops only and pull each stitch snug. Add a second pass if needed.
Ball is lumpy. Pull out the stuffing and add it again in small tufts. Fill the sides before the center.
Top gather has a hole. Weave a second round of yarn through the same sts and pull tight. The bow will hide any small gap.
Ornament is smaller than 3 in (7.6 cm). Your gauge is tight. Stuff a little more firmly, or rework the panel with a larger hook.
Care
Spot clean with a damp cloth and mild soap, then reshape the ball and let it air dry. Store it in a box or bag away from crushing weight so the stuffing keeps its round shape.

Final Notes
The whole ornament depends on one simple measurement chain:
- 16 sts and 10 rows = 4 in (10.2 cm) in basketweave pattern
- 34 sts x 13 rows = 8.5 in x 5.2 in (21.6 cm x 13.2 cm)
- A 1/4 in (0.6 cm) border with 128 sc brings the panel to 9.0 in x 5.7 in (22.9 cm x 14.5 cm)
- Seaming gives a tube with a circumference of about 8.75 in (22.2 cm)
- Gathering and stuffing make a ball about 3 in (7.6 cm) across
If the panel matches, the ball will match. Make one in royal blue, then try rust, cream, brown or sage with a contrasting bow for a full set of tree ornaments.
Happy crocheting!