Rusty Fox Toilet Paper Holder Crochet Pattern

Rusty is a cheerful fox who hangs on your bathroom wall and holds a spare roll at the bottom of a soft strap. His round rust head with cream cheeks and tan eye patches peeks over the top, and two puffy paws grip the strap.

The colors are warm and earthy. Rust is used for the fox and the strap, cream for the muzzle, paws, and inner ears, tan for the eye patches, and dark brown for the nose. A natural wood button finishes the hanging loop. The look is cozy and a little rustic.

This pattern uses US crochet terms. The finished holder is about 18.25 in (46.4 cm) tall and 6.5 in (16.5 cm) wide at the head. The strap is 5 in (12.7 cm) wide.

You crochet a long single crochet strap in rows, add a border, and seam the short ends into a loop. Then you make the head, ears, face pieces, paws, and hanging loop and sew them to the top of the strap.

Finished Size and Construction

  • Finished size: 18.25 in (46.4 cm) tall x 6.5 in (16.5 cm) wide at the head
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: US G-7 (4.5 mm)
  • Number of pieces: 11 crocheted parts (1 strap, 1 head, 2 ears, 1 muzzle, 2 eye patches, 1 nose, 2 paws, 1 hanging loop), sewn into one holder
  • Layout: Vertical stack with the hanging loop at the top, then the ears, head, paws, and strap loop
  • Strap size before border: 4.5 in x 26 in (11.4 cm x 66.0 cm)
  • Strap size after border: 5 in x 26.5 in (12.7 cm x 67.3 cm)
  • Strap seamed and flattened: 5 in x 13.25 in (12.7 cm x 33.7 cm)
  • Border depth: 0.25 in (0.6 cm) per side

Materials

Choose a smooth, sturdy worsted cotton or cotton blend. Cotton holds its shape in a humid bathroom and gives the strap crisp stitch columns. The amounts below are based on a yarn with about 200 m per 100 g.

  • Rust (main color): 100 g / 200 m
  • Cream: 20 g / 40 m
  • Tan: 10 g / 20 m
  • Dark brown: 5 g / 10 m
  • Black: 2 g / 4 m (for embroidering the smile)

These amounts include a safety margin of about 15 percent.

Tools and notions

  • US G-7 (4.5 mm) crochet hook
  • Two 12 mm black safety eyes
  • One 1 in (2.5 cm) wooden button with four holes
  • A small pinch of fiberfill
  • Tapestry needle, stitch markers, scissors, measuring tape

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together
  • MR – magic ring
  • st(s) – stitch(es)
  • rnd – round

Special stitch – Toe: (3 hdc in the next st, sl st in the following st). Each Toe uses 2 sts and makes one soft bump.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc worked in rows.

Make the strap first. It is the biggest part, so it works as your gauge test. Measure at each of these points:

  • After Row 1: 4.5 in (11.4 cm) wide.
  • After Row 18: 4 in (10.2 cm) long.
  • After Row 117: 26 in (66.0 cm) long.
  • Head after Rnd 8: about 6.5 in x 4 in (16.5 cm x 10.2 cm).

If the strap is too wide, go down one hook size. If it is too narrow, go up one hook size. If the width is right but the length is off, change the number of rows and keep the same hook. A standard roll needs a loop that is at least 24 in (61.0 cm) around.

Crocheted rust-orange fox with cream face, black button eyes, and embroidered brown nose on white marble background.

Strap

With rust, ch 19.

Row 1: Sc in the 2nd ch from hook and in each ch across. (18 sts)

Rows 2–117: Ch 1, turn. Sc in each st across. (18 sts)

Do not fasten off. Go straight to the Border section. Working through both loops lines the stitches up into the vertical columns you see on the finished strap.

Head

With rust, ch 13. The head is worked in joined rounds. End each rnd with a sl st into the first sc, then ch 1. The ch 1 does not count as a stitch.

Rnd 1: Sc in the 2nd ch from hook, sc in the next 10 ch, 3 sc in the last ch. Working along the other side of the chain, sc in the next 10 ch, then 2 sc in the first ch. (26 sts)

Rnd 2: [Inc 3 times, sc 10] twice. (32 sts)

Rnd 3: [(Sc 1, inc) 3 times, sc 10] twice. (38 sts)

Rnd 4: [(Sc 2, inc) 3 times, sc 10] twice. (44 sts)

Rnd 5: [(Sc 3, inc) 3 times, sc 10] twice. (50 sts)

Rnd 6: [(Sc 4, inc) 3 times, sc 10] twice. (56 sts)

Rnd 7: [(Sc 5, inc) 3 times, sc 10] twice. (62 sts)

Rnd 8: [(Sc 6, inc) 3 times, sc 10] twice. (68 sts)

Fasten off and leave a 24 in (61.0 cm) tail for sewing. The head measures about 6.5 in x 4 in (16.5 cm x 10.2 cm).

Ears (Make 2)

Inner ear: With cream, ch 7.

  • Row 1: Sc in the 2nd ch from hook and in each ch across. (6 sts)
  • Row 2: Ch 1, turn. Sc in each st. (6 sts)
  • Row 3: Ch 1, turn. Sc2tog, sc 2, sc2tog. (4 sts)
  • Row 4: Ch 1, turn. Sc in each st. (4 sts)
  • Row 5: Ch 1, turn. Sc2tog twice. (2 sts)
  • Row 6: Ch 1, turn. Sc in each st. (2 sts)
  • Row 7: Ch 1, turn. Sc2tog. (1 st)

Fasten off the cream.

Rust edging: Join rust in the first st of Row 1. Along the base: 2 sc in the first st, sc 4, 2 sc in the last st (8 sts). Up the side: 1 sc in the end of each of Rows 1–6 (6 sts). At the tip: 3 sc in the single st of Row 7 (3 sts). Down the other side: 1 sc in the end of each of Rows 6–1 (6 sts). Sl st to the first sc to join. (23 sts)

Fasten off and leave a 10 in (25.4 cm) tail. Each ear is about 2 in x 2 in (5.1 cm x 5.1 cm).

Muzzle

With cream, ch 15. Join each rnd the same way as the head.

  • Rnd 1: Sc in the 2nd ch from hook, sc in the next 12 ch, 3 sc in the last ch. Along the other side, sc in the next 12 ch, then 2 sc in the first ch. (30 sts)
  • Rnd 2: [Inc 3 times, sc 12] twice. (36 sts)
  • Rnd 3: [(Sc 1, inc) 3 times, sc 12] twice. (42 sts)
  • Rnd 4: [(Sc 2, inc) 3 times, sc 12] twice. (48 sts)

Fasten off and leave a long tail. The muzzle is about 5.5 in x 2 in (14.0 cm x 5.1 cm).

Eye Patches (Make 2)

With tan, ch 4.

  • Rnd 1: Sc in the 2nd ch from hook, sc 1, 3 sc in the last ch. Along the other side, sc 1, then 2 sc in the first ch. (8 sts)
  • Rnd 2: [Inc 3 times, sc 1] twice. (14 sts)
  • Rnd 3: [(Sc 1, inc) 3 times, sc 1] twice. (20 sts)

Fasten off and leave a long tail. Each patch is about 1.75 in x 1.25 in (4.4 cm x 3.2 cm).

Nose

With dark brown, make a MR.

  • Rnd 1: 6 sc in the ring. (6 sts)
  • Rnd 2: [Sc 1, inc] 3 times. (9 sts)

Join and fasten off. The nose is about 0.75 in (1.9 cm) across.

Paws (Make 2)

With cream, make a MR.

  • Rnd 1: 6 sc in the ring. (6 sts)
  • Rnd 2: Inc in each st. (12 sts)
  • Rnd 3: [Sc 1, inc] 6 times. (18 sts)
  • Rnd 4: Sc in the next 12 sts, then work 3 Toes. (12 sc + 9 hdc + 3 sl st = 24 sts)

Fasten off and leave a long tail. Each paw is about 1.75 in x 1.5 in (4.4 cm x 3.8 cm).

Hanging Loop

With rust, ch 41.

  • Row 1: Sc in the 2nd ch from hook and in each ch across. (40 sts)
  • Rows 2–3: Ch 1, turn. Sc in each st. (40 sts)

Fasten off and leave a long tail. The strip measures about 10 in x 0.75 in (25.4 cm x 1.9 cm). Whipstitch the short ends together to make a ring. Laid flat, it forms a 5 in (12.7 cm) loop.

Make All Pieces

  • Rust: 1 strap, 1 head, 1 hanging loop, plus the edging on both ears
  • Cream: 1 muzzle, 2 paws, 2 inner ears
  • Tan: 2 eye patches
  • Dark brown: 1 nose

Layout (front view, top to bottom):

        [ hanging loop + button ]
   [ ear ]                  [ ear ]
   [ eye patch ]      [ eye patch ]
              [  head  ]
          [ muzzle + nose ]
   [ paw ]   strap front    [ paw ]
           [ strap loop ]
           [ roll inside ]

Joining

Sew everything with a whipstitch, taking one stitch from each layer every time. Pull each stitch snug but not tight, so the seams stay flat and do not pucker.

  1. Strap. Once the border is finished, fold the strap so the short ends meet. Whipstitch the 20 border sts of one end to the 20 border sts of the other end, one stitch to one stitch. Lay the loop flat with the seam at the top center of the back. It measures 5 in x 13.25 in (12.7 cm x 33.7 cm).
  2. Face. Sew the muzzle over the lower third of the head, 0.25 in (0.6 cm) above the bottom edge. Sew the eye patches just above it, tilted slightly outward. Push a safety eye through the center of each patch and the head, then lock the washer on the back.
  3. Nose and smile. Sew the nose to the top center of the muzzle. With black yarn, embroider a short line down from the nose and a small “w” smile.
  4. Ears. Sew the ears behind the top of the head, angled outward, so 0.5 in (1.3 cm) of each base is hidden behind the head.
  5. Hanging loop. Sew the bottom 1.5 in (3.8 cm) of the flat loop to the back of the head, so 3.5 in (8.9 cm) sticks up above it. Sew the button to the top front of the loop through the front layer only.
  6. Head to strap. Center the head over the strap seam so 1.5 in (3.8 cm) of the head sits above the strap’s top edge. The head extends 0.75 in (1.9 cm) past the strap on each side. Sew through both strap layers along the top 1 in (2.5 cm), then through the front layer only below that.
  7. Paws. Put a small wisp of fiberfill behind each paw. Sew the paws just below the head with the toes pointing up, each one hanging 0.5 in (1.3 cm) past the edge of the strap.

Size checkpoint: The holder should now measure 18.25 in (46.4 cm) from the top of the hanging loop to the bottom of the strap.

Border

Work the border around the strap only, at the same gauge of 16 sts per 4 in (10.2 cm). Each corner gets 3 sc. The middle sc of each group is the corner stitch, and it counts toward both sides it touches.

After Row 117, do not turn.

Rnd 1: Ch 1. Work 3 sc in the last st of Row 117 (corner). Working down the long side, sc in the end of each of Rows 116–2 (115 sts). Work 3 sc in the first foundation ch (corner), sc in the next 16 chs, then 3 sc in the last foundation ch (corner). Working up the other long side, sc in the end of each of Rows 2–116 (115 sts). Work 3 sc in the first st of Row 117 (corner), then sc in the next 16 sts. Sl st to the first sc to join. (274 sts)

Stitches per side, counting both corner stitches:

  • Each long side: 1 corner + 1 + 115 + 1 + 1 corner = 119 sts
  • Each short end: 1 corner + 1 + 16 + 1 + 1 corner = 20 sts

Rnd 2: Sl st loosely in each st around. (274 sl sts) Fasten off and weave in the end.

Why the math works: Each long side gets 1 sc per row end for the 115 rows between the corners, so the edges stay flat. On each short end, the 16 middle sts and the two corner groups cover the 18 sts of the end row, and the extra corner stitches let the corners turn without cupping. Total: 4 x 3 = 12, plus 2 x 16 = 32, plus 2 x 115 = 230, which equals 274. The border adds 0.25 in (0.6 cm) on every side. The strap goes from 4.5 in x 26 in (11.4 cm x 66.0 cm) to 5 in x 26.5 in (12.7 cm x 67.3 cm).

Final Blocking

  1. Before you seam the strap, pin it flat to 5 in x 26.5 in (12.7 cm x 67.3 cm).
  2. Mist it until it is damp but not soaked.
  3. Pin the head to 6.5 in x 4 in (16.5 cm x 10.2 cm). Pin the ears to 2 in x 2 in (5.1 cm x 5.1 cm) with sharp tips.
  4. Let every piece dry completely.
  5. After assembly, steam the face lightly and keep the iron well away from the safety eyes.

Final Quality-Control Checklist

  • The strap measures 5 in x 26.5 in (12.7 cm x 67.3 cm).
  • The border has 274 sts: 119 on each long side and 20 on each short end.
  • The strap seam is hidden behind the head.
  • The head has 68 sts and measures 6.5 in x 4 in (16.5 cm x 10.2 cm).
  • Both ears match and have crisp tips.
  • The safety eye washers are locked and covered by the strap.
  • The paws sit level with each other.
  • The hanging loop stays open under the button.
  • A roll slides easily into the bottom of the strap loop.

Troubleshooting

  • Strap edges wave: The border is too loose. Rework Rnd 1 with a hook one size smaller.
  • Strap edges pull in: Some row ends were skipped. Count 115 sts on each long side.
  • Head cups: Go up one hook size for the head.
  • Head ruffles: Count each rnd again and check it against the totals.
  • Ears curl: Pin all three corners and block again.
  • Holder tips forward: Sew the head through both strap layers along the top 1 in (2.5 cm).
  • Roll fits too tightly: Add 4 rows to the strap. This adds about 0.9 in (2.3 cm).

Care

Hand wash in cool water and lay flat to dry. Reshape the ears and head while they are still damp.

Crocheted rust-orange and cream fox toilet paper holder hanging on bathroom wall.

Final Notes

Each measurement builds on the gauge of 16 sts and 18 rows per 4 in (10.2 cm). With that gauge, 18 sts make a 4.5 in (11.4 cm) wide strap, and 117 rows make it 26 in (66.0 cm) long. The border brings it to 5 in x 26.5 in (12.7 cm x 67.3 cm). Seamed and laid flat, the strap is 13.25 in (33.7 cm) tall. With the head, ears, and hanging loop added, Rusty is 18.25 in (46.4 cm) tall.

Happy crocheting!

Leave a Comment