Sage Lattice Hanging Bag Holder Crochet Pattern

This hanging bag holder is a tall, narrow cylinder with a solid single crochet base, an open diamond-mesh body, a solid top band, and one strap handle for hanging it on a cabinet knob or hook. Push plastic grocery bags in at the top, and the mesh lets you see at a glance how many you have left. It’s a quick, useful make that tidies up the cupboard under the sink.

The sample is in soft sage green worsted-weight cotton, and the design works just as well in cream or natural. The lattice is light and airy, while the solid bands keep the top and bottom firm so the holder keeps its shape even when it’s nearly empty.

This pattern uses US crochet terms. The finished holder measures about 3.8 in (9.7 cm) across and 10.7 in (27.2 cm) tall, not counting the handle. The handle adds a hanging loop about 6.4 in (16.3 cm) tall.

Construction is continuous and needs no sewing until the last step. You work a flat circle for the base, turn the edge up with a back-loop round, and build a short solid wall. Then you switch to chain-loop mesh for the body, convert back to solid single crochet for the top band, and work the strap in rows straight off the top edge. To finish, you attach the strap to the opposite side.

Finished Size and Construction

  • Finished size: 3.8 in (9.7 cm) diameter x 10.7 in (27.2 cm) tall, plus a handle loop of 6.4 in (16.3 cm)
  • Skill level: Easy / advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), 100% cotton
  • Hook: US G-6 (4.0 mm)
  • Number of pieces: 1 (base, body, top band and strap worked continuously)
  • Layout: Vertical cylinder with the strap centered over the opening
  • Body circumference: 48 sts = 12 in (30.5 cm)
  • Size before top band: 8.6 in (21.8 cm) tall (base wall + mesh)
  • Top band depth: 2.1 in (5.3 cm)

Materials

Yarn: Use a smooth worsted-weight cotton or a cotton blend. Cotton holds its shape under the weight of the bags, and the strap won’t stretch as much as it would in acrylic. Avoid very splitty yarns, because the mesh rounds involve working around chain spaces many times.

  • Sage green (main color): approx. 85 g / 155 m

The quantity includes a margin of roughly 15% for checking gauge and for tension differences. One standard 100 g ball is enough. For a cream version like the second holder, use the same amount of cream cotton.

Tools:

  • US G-6 (4.0 mm) crochet hook
  • 1 stitch marker
  • Tapestry needle
  • Scissors
  • Measuring tape
  • A 3.5–4 in (8.9–10.2 cm) wide bottle or rolled towel for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • BLO – back loop only
  • MR – magic ring
  • rep – repeat

Special technique – ch 2, dc closing loop: At the end of each mesh round, instead of chaining 5 and slip stitching into the first sc, you ch 2 and work 1 dc into the first sc. The ch-2 plus dc spans the same distance as a ch-5 loop, and it leaves your hook at the center of that final loop, ready to begin the next round. You don’t need to slip stitch across to get into position.

Gauge and Checkpoints

Gauge: 16 sc x 17 rounds = 4 in (10.2 cm) in joined sc rounds.

The holder is your test piece, so start it and measure early. These are the checkpoints:

  1. After base Rnd 8 (48 sts): The flat circle measures 3.8 in (9.7 cm) across and lies flat.
  2. After Rnd 14: The solid wall stands 1.4 in (3.6 cm) tall above the base fold.
  3. After 6 mesh rounds: The mesh measures about 3.6 in (9.1 cm) tall, gently stretched (roughly 0.6 in / 1.5 cm per round).
  4. After 12 mesh rounds: The mesh measures 7.2 in (18.3 cm), and the total height is 8.6 in (21.8 cm).
  5. After the top band: The total height is 10.7 in (27.2 cm).

If your circle is too big (over 4 in / 10.2 cm), go down to a 3.75 mm hook. If it’s too small (under 3.6 in / 9.1 cm), go up to a 4.5 mm hook. For the solid sections, getting the round counts right matters more than the exact height. For the mesh, you can add or remove a round to adjust the height without changing anything else.

Close-up details of a sage green crocheted basket showing spiral stitching, mesh openwork, and rope handles on natural backgrounds.

Pattern

Work in joined rounds. At the start of each round, ch 1 (this does not count as a stitch). At the end, sl st to the first sc. Place a marker in the first sc of each round.

Base

Rnd 1: In a MR, work 6 sc. Join. (6 sts)

Rnd 2: Inc in each st around. Join. (12 sts)

Rnd 3: Sc 1, inc 6 times. Join. (18 sts)

Rnd 4: Sc 2, inc 6 times. Join. (24 sts)

Rnd 5: Sc 3, inc 6 times. Join. (30 sts)

Rnd 6: Sc 4, inc 6 times. Join. (36 sts)

Rnd 7: Sc 5, inc 6 times. Join. (42 sts)

Rnd 8: Sc 6, inc 6 times. Join. (48 sts)

The circle should measure 3.8 in (9.7 cm) across. If it ruffles or cups, check your hook size before you continue.

Solid Lower Wall

Rnd 9: Sc in BLO of each st around. Join. (48 sts)

This round leaves a visible ridge on the outside and makes the edge turn up sharply, giving the holder its flat bottom.

Rnds 10–14: Sc in each st around. Join. (48 sts each round)

The wall is now 6 rounds deep, 1.4 in (3.6 cm).

Diamond Mesh Body

Mesh Rnd 1 (Rnd 15): Ch 1, sc in the same st as the join, ch 5, sk 3 sts, sc in next st 11 times, ch 2, sk 3 sts, dc in first sc. (12 loops)

Check: the sc’s land in sts 1, 5, 9 and so on up to 45. Sts 46–48 are skipped under the closing loop. That’s 12 loops x 4 sts each = 48 sts used.

Mesh Rnd 2 (Rnd 16): Ch 1, sc around the post of the dc just made, ch 5, sc in next ch-5 sp 11 times, ch 2, dc in first sc. (12 loops)

Each sc sits at the center of a loop from the round below. That’s what creates the diagonal lattice: every new loop bridges two old ones and forms a diamond.

Mesh Rnds 3–12 (Rnds 17–26): Rep Mesh Rnd 2. (12 loops each round)

Gently stretch the mesh lengthwise and measure. Twelve mesh rounds should measure about 7.2 in (18.3 cm), for a total height of 8.6 in (21.8 cm) from the base fold.

The final round ends with the ch 2, dc closing loop, so your hook is at the center of the last loop.

Top Band

The solid top band serves as this holder’s border. It closes the mesh, sets the size of the opening, and anchors the handle.

Band gauge: 4 sc per inch (per 2.5 cm), same as the lower wall. 48 sts = 12 in (30.5 cm).

Rnd 27 (conversion round): Ch 1, 2 sc around the post of the dc just made, 4 sc in each of the next 11 ch-5 sps, 2 sc in the remaining ch-2 sp. Join. (48 sts)

Count check: the closing loop (dc and ch-2) gets 2 sc + 2 sc = 4 sc, so (12 loops x 4 sc) + 0 extra stitches = 48 sts.

Divided into quarters around the tube, that’s 3 loops x 4 sc = 12 sts per quarter, and 12 sts x 4 quarters = 48 sts.

Rnds 28–35: Sc in each st around. Join. (48 sts each round)

The top band is now 9 rounds deep, 2.1 in (5.3 cm), and the total height is 10.7 in (27.2 cm). Don’t fasten off.

Why the math works: The lower wall has 48 sts. Each of the 12 loops in Mesh Rnd 1 used up 4 of those stitches, and the conversion round puts exactly 4 sc back into each loop. The top band therefore matches the lower wall stitch for stitch, so the holder is a straight cylinder with no flare at the opening and no pinching below the band.

Strap Handle

Row 1: Ch 1, sc in the first 4 sts of Rnd 35, turn. (4 sts)

Rows 2–54: Ch 1, sc in each st across, turn. (4 sts each row)

The strap measures 1 in (2.5 cm) wide and 12.7 in (32.3 cm) long.

Attach: Make sure the strap isn’t twisted. Bring the end of Row 54 to the inside of the top band, directly opposite the start: sts 25–28 of Rnd 35. Sts 1–4 and sts 25–28 are exactly 24 sts apart, which is half of 48, so the strap is centered.

Sl st Row 54 to sts 25–28 through both layers, working 1 sl st per stitch (4 sl sts). Fasten off, leaving a 6 in (15.2 cm) tail, and whipstitch the strap end to the band once more for strength.

Optional strap edging: For a firmer, rounded edge, join yarn at one end of the strap and sl st in each row-end along both long edges (54 sl sts per side). Fasten off.

Final Blocking

  1. Weave in all ends on the inside, running each tail through solid sc rows rather than through the mesh.
  2. Soak the holder in cool water for 10 minutes and press out the water in a towel. Don’t wring it.
  3. Slide the holder over a bottle or rolled towel 3.5–4 in (8.9–10.2 cm) wide.
  4. Gently pull the mesh lengthwise until the diamonds look even and the total height is 10.7 in (27.2 cm).
  5. Line up the diamonds so the columns run straight up from the base.
  6. Lay the strap flat, straighten it to 12.7 in (32.3 cm), and pin it if needed.
  7. Let it dry completely before you remove the form.

Final Quality-Control Checklist

  • The base is flat, with a clear BLO ridge at the fold.
  • The lower wall and top band each have 48 sts.
  • Every mesh round has 12 loops.
  • The diamonds are the same size all the way up.
  • The top opening is the same width as the base: 3.8 in (9.7 cm) across.
  • The strap is 4 sts wide, isn’t twisted, and is attached directly opposite its starting point.
  • The strap joins are secure at both ends.
  • The total height is 10.7 in (27.2 cm).

Troubleshooting

The base cups instead of lying flat: You’re crocheting tightly. Go up a hook size for the base only, or check that you placed 6 increases per round.

The base ruffles: Your stitches are loose, or you added an extra increase. Count to 48 and drop a hook size if needed.

The mesh is too long or droopy: Cotton relaxes under weight. Work 11 mesh rounds instead of 12, or use ch 4 instead of ch 5 for every loop (and ch 1 instead of ch 2 before the closing dc).

The diamonds lean into a spiral: Make sure each sc goes into the center of the loop below, not near one end.

You lost count of the loops: Count the sc anchors after each round. There should always be 12, and the closing dc counts as one.

The top band flares: You worked 5 sc into some loops. Rework the conversion round with exactly 4 sc per loop (2 + 2 for the closing loop).

The strap stretches: Add the optional sl st edging, or shorten the strap to 48 rows.

Care

Hand wash in cool water, then lay flat or reshape over a bottle to dry. Cotton can be machine washed on a gentle cycle inside a laundry bag, though it may shrink slightly.

Sage green crocheted bag with lattice detail, suspended from wooden knob, filled with gray fabrics in a bright, minimal interior.

Final Notes

Here’s how the measurements build up:

  • The 48-st base is 3.8 in (9.7 cm) across and 12 in (30.5 cm) around.
  • The solid wall adds 1.4 in (3.6 cm).
  • Twelve rounds of 12-loop mesh add 7.2 in (18.3 cm).
  • The 48-st top band adds 2.1 in (5.3 cm), for a total of 10.7 in (27.2 cm).
  • A 4-st, 54-row strap 12.7 in (32.3 cm) long forms a 6.4 in (16.3 cm) hanging loop.

As long as you have 48 sts in every solid round and 12 loops in every mesh round, the holder comes out straight and sturdy.

Happy crocheting!

Leave a Comment