Seaglass Lattice Three-Tier Hanging Toilet Paper Holder Crochet Pattern

This hanging holder stacks three round baskets on two braided straps, and each basket holds one standard toilet paper roll. It hangs from a single wall peg and makes good use of the empty wall space beside a sink or above a toilet tank.

The palette is calm seaglass teal with a raised cream lattice. Each basket has a band of crossed front-post stitches that forms a row of diamonds with teal showing through the middle, plus a corded crab-stitch rim. The look is clean and a little coastal, and it works in most bathrooms.

All terms are US. The assembled holder measures about 21.8 in (55.4 cm) tall from the base of the bottom basket to the top of the hanging peak. The baskets are 5.1 in (13.0 cm), 5.7 in (14.5 cm) and 6.4 in (16.3 cm) across.

Construction is simple. You crochet each basket in joined rounds: first a flat base, then a back-loop turning round, then the walls with the lattice band, and finally a crab-stitch rim. Two flat straps are made separately. They are sewn up opposite sides of the three baskets, and their ends are joined to form the hanging peak.

Finished Size and Construction

  • Finished size: about 21.8 in (55.4 cm) tall x 6.4 in (16.3 cm) wide at the bottom basket
  • Skill level: Intermediate (front-post trebles, crab stitch, color changes)
  • Terminology: US crochet terms
  • Yarn weight: #5 bulky cotton or cotton blend
  • Hook: 6.0 mm (US J-10)
  • Number of pieces: 5 (3 baskets + 2 straps)
  • Layout: 3 baskets stacked in one vertical column with gaps between them; 2 straps on opposite sides
  • Piece sizes:
  • Small basket: 5.1 in (13.0 cm) diameter x 3.1 in (7.9 cm) tall
  • Medium basket: 5.7 in (14.5 cm) diameter x 3.4 in (8.6 cm) tall
  • Large basket: 6.4 in (16.3 cm) diameter x 3.7 in (9.4 cm) tall
  • Straps: 22 in (55.9 cm) long x 0.7 in (1.8 cm) wide
  • Size before border (rim): wall heights are 2.8 in (7.1 cm), 3.1 in (7.9 cm) and 3.4 in (8.6 cm)
  • Border depth: 1 crab-stitch round, about 0.3 in (0.8 cm)

Materials

Choose a firm cotton or cotton blend so the baskets hold their shape and hold up to bathroom humidity. Avoid fuzzy acrylics, because they blur the lattice. These amounts assume a yarn of roughly 120 m per 100 g.

  • Teal (Color A): 300 g / 360 m
  • Cream (Color B): 75 g / 90 m

All quantities include a margin of about 15 percent for your gauge swatch and for tension differences.

Tools:
– 6.0 mm (US J-10) crochet hook
– Tapestry needle
– 4 locking stitch markers
– Scissors
– Measuring tape
– Rustproof pins and a spray bottle for blocking
– Wall peg or hook, 1 in (2.5 cm) or more in diameter

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • FPtr – front post treble crochet
  • rev sc – reverse single crochet (crab stitch)
  • st(s) – stitch(es)
  • rnd(s) – round(s)
  • MR – magic ring

Special stitch – FPtr: Yarn over twice. Insert the hook from front to back to front around the post of the stated stitch. Yarn over and pull up a loop, then (yarn over, pull through 2 loops) 3 times. Always skip the stitch hidden behind an FPtr in the current round.

Special stitch – rev sc: Work single crochet from left to right (right-handers) by inserting the hook into the next stitch to the right of your hook.

Gauge and Checkpoints

Gauge: 12 sc and 13 rnds = 4 in (10.2 cm) in sc worked in joined rounds.

Before starting the full set, make the small basket base as your test piece and check each stage:

  • Base Rnd 4 (24 sts): about 2.5 in (6.4 cm) across
  • Base Rnd 6 (36 sts): about 3.8 in (9.7 cm) across
  • Base Rnd 8 (48 sts): 5.1 in (13.0 cm) across
  • Small wall Rnd 9: about 2.8 in (7.1 cm) tall from the base edge

A tolerance of ±0.25 in (±0.6 cm) on diameter is fine. If your base is too big, go down one hook size. If it is too small, or the base cups upward, go up one hook size. If the base ripples, your tension is too loose for the increases, so go down a size.

Check that a standard roll, about 4.5 in (11.4 cm) wide, fits loosely inside the small basket before you continue.

Teal crocheted fabric with cream braided decorative trim detail against a brown background.

Basket Pattern

All rounds are joined with a sl st to the first st. Ch 1 at the start of each round does not count as a stitch. To change colors, work the final yarn-over of the joining sl st in the new color. Carry the unused color loosely up the inside of the wall rather than cutting it.

S is the stitch count of your basket: Small 48, Medium 54, Large 60. All three are multiples of 3, which the lattice repeat needs.

Base (Color A)

Rnd 1: MR, ch 1, 6 sc in ring, join. (6 sts)

Rnd 2: Ch 1, inc in each st around, join. (12 sts)

Rnd 3: Ch 1, (sc 1, inc) 6 times, join. (18 sts)

Rnd 4: Ch 1, (sc 1, inc, sc 1) 6 times, join. (24 sts)

Rnd 5: Ch 1, (sc 3, inc) 6 times, join. (30 sts)

Rnd 6: Ch 1, (sc 2, inc, sc 2) 6 times, join. (36 sts)

Rnd 7: Ch 1, (sc 5, inc) 6 times, join. (42 sts)

Rnd 8: Ch 1, (sc 3, inc, sc 3) 6 times, join. (48 sts) Small base ends here.

Rnd 9 (Medium and Large only): Ch 1, (sc 7, inc) 6 times, join. (54 sts) Medium base ends here.

Rnd 10 (Large only): Ch 1, (sc 4, inc, sc 4) 6 times, join. (60 sts) Large base ends here.

Staggering the increases keeps the circle round instead of hexagonal.

Wall Turning Round (Color A)

Wall Rnd 1: Ch 1, sc in BLO of each st around, join. (S sts)

The unworked front loops make the ridged edge that turns the base up into a wall.

Lower Wall (Color A)

Work ch 1, sc in each st around, join (S sts) for:
– Small: Wall Rnds 2–3 (2 rnds)
– Medium: Wall Rnds 2–4 (3 rnds)
– Large: Wall Rnds 2–5 (4 rnds)

Lattice Band (4 rounds)

The lattice band takes the next 4 rounds. They are called Band Rnds A–D below.

Band Rnd A (Color B): Ch 1, sc in each st around, join. (S sts)

This is the lower cream line, and the FPtr stitches will be anchored to it.

Band Rnd B (Color A): Ch 1, sc in each st around, join. (S sts)

Band Rnd C (Color B): Ch 1. Sc in next st. Skip next 2 sts of Band Rnd B. FPtr around the Band Rnd A st below the second skipped st. Then FPtr around the Band Rnd A st below the first skipped st, working in front of the FPtr you just made. Repeat from * around and join. (S sts: S/3 repeats of 1 sc + 2 FPtr)

Repeats: Small 16, Medium 18, Large 20.

Each crossed pair makes a raised cream X. The single sc between pairs lets the Band Rnd B teal show through, and this creates the teal diamond centers.

Band Rnd D (Color B): Ch 1, sc in each st around (including the top of each FPtr), join. (S sts)

This upper cream line closes the diamonds. Fasten off Color B.

Upper Wall (Color A)

Next 2 rnds: Ch 1, sc in each st around, join. (S sts)
– Small: Wall Rnds 8–9
– Medium: Wall Rnds 9–10
– Large: Wall Rnds 10–11

Do not fasten off. The rim (border) is worked next.

Make All Pieces

Baskets: 1 Small (48 sts), 1 Medium (54 sts), 1 Large (60 sts).

Rounds per basket:
– Small: 8 base rnds + 10 wall rnds
– Medium: 9 base rnds + 11 wall rnds
– Large: 10 base rnds + 12 wall rnds

The wall-round count includes the rim.

Straps (make 2, Color A):

Row 1: Ch 67. Sc in 2nd ch from hook and in each ch across. (66 sts)

Row 2: Ch 1, turn, sc in each st across. (66 sts)

Row 3: Ch 1, turn, sl st in BLO of each st across. (66 sts) Fasten off and leave a 24 in (61.0 cm) tail for sewing.

The slip-stitch row gives the strap its braided, corded surface. Each strap should measure 22 in (55.9 cm) x 0.7 in (1.8 cm).

Layout grid (front view):

        /\        <- peak (strap ends joined)
       /  \
      |    |
      |[S] |      <- Small basket
      |    |
      |[M] |      <- Medium basket
      |    |
      |[L] |      <- Large basket

Strap stitch map (Row 1 sts, counted from the bottom end):
– Sts 1–11: Large basket wall, 3.7 in (9.4 cm)
– Sts 12–19: gap, 2.7 in (6.9 cm)
– Sts 20–29: Medium basket wall, 3.3 in (8.4 cm)
– Sts 30–37: gap, 2.7 in (6.9 cm)
– Sts 38–46: Small basket wall, 3.0 in (7.6 cm)
– Sts 47–66: rising section to the peak, 6.7 in (17.0 cm)

Total: 11 + 8 + 10 + 8 + 9 + 20 = 66 sts.

Joining

Method: Whipstitch with the Color A tail, sewing through the strap edges and the outer wall stitches.

Placement:
1. Mark the first stitch of each basket’s last wall round, then mark stitch S/2 + 1 directly opposite: Small st 25, Medium st 28, Large st 31. These marks are the strap lines. Line up all three baskets so the marks sit in vertical columns.
2. Pin each strap with stitch 1 at the BLO ridge of the Large basket.
3. Sew stitches 1–11 up the Large wall. Each strap stitch lines up with about one wall round, so check that the strap stays vertical and is not stretched.
4. Leave stitches 12–19 free. Then sew stitches 20–29 to the Medium wall, starting at its BLO ridge.
5. Leave stitches 30–37 free. Then sew stitches 38–46 to the Small wall.
6. Bring the two strap tops together. Butt their short ends at stitch 66 and whipstitch them together for the peak. Reinforce with a second pass.

Tension: Sew firmly but do not pull until the wall puckers. The straps carry all the weight, so make 2 stitches through each wall round.

Size checkpoint: When hung, the holder measures about 21.8 in (55.4 cm) tall. That is 3.7 + 2.7 + 3.4 + 2.7 + 3.1 in of baskets and gaps, plus a peak about 6.2 in (15.7 cm) high. If the gaps sag more than 0.5 in (1.3 cm), add a second line of whipstitches along each sewn section.

Border (Basket Rims)

The border is the corded crab-stitch rim on each basket. It is worked before joining, straight after the upper wall, in Color A.

Border gauge: 1 rev sc per wall stitch. This matches the 12 sts per 4 in (10.2 cm) of the wall.

Rim Rnd (Small Wall Rnd 10 / Medium Wall Rnd 11 / Large Wall Rnd 12): Ch 1, rev sc in each st around, join. Fasten off and weave in the end.

  • Small: 48 rev sc
  • Medium: 54 rev sc
  • Large: 60 rev sc

Why the math works: The rim circumference is the same as the wall circumference: 16 in (40.6 cm), 18 in (45.7 cm) and 20 in (50.8 cm) for S = 48, 54 and 60 at 3 sts per inch. Working exactly 1 rev sc per stitch adds no fullness, so the rim does not ruffle. Skipping none means it does not draw in. Each rim adds about 0.3 in (0.8 cm) of height and brings the walls to 3.1 in (7.9 cm), 3.4 in (8.6 cm) and 3.7 in (9.4 cm).

Final Blocking

  1. Weave in all ends on the inside of the baskets.
  2. Mist each basket lightly with the spray bottle until damp, not soaked.
  3. Stuff each basket firmly with a toilet roll or a rolled towel to square up the walls.
  4. Press each base flat on a towel. Run a finger along the BLO ridge to sharpen the turn.
  5. Pinch the cream FPtr crosses gently so they stand proud of the teal.
  6. Lay the straps flat and pin them straight to 22 in (55.9 cm). Let them dry.
  7. Let everything dry completely before joining or hanging.

Final Quality-Control Checklist

  • Base diameters are 5.1 in (13.0 cm), 5.7 in (14.5 cm) and 6.4 in (16.3 cm), each ±0.25 in (±0.6 cm)
  • Final stitch counts are 48, 54 and 60
  • Lattice repeats are 16, 18 and 20 crossed pairs, all crossing in the same direction
  • The rims lie flat with no ruffling
  • Both straps measure 66 sts and 22 in (55.9 cm)
  • Strap lines sit directly opposite each other on every basket
  • Gaps between baskets are equal at 2.7 in (6.9 cm)
  • The peak seam is reinforced and the holder hangs level

Troubleshooting

  • Base cups like a bowl: Your tension is too tight. Go up a hook size or loosen your increases.
  • Base ripples: Go down a hook size and recheck Rnd 4.
  • Lattice crosses lean unevenly: Always anchor the first FPtr on the farther stitch and the second on the nearer stitch, crossing in front.
  • Count is off after Band Rnd C: You forgot to skip the 2 Band Rnd B stitches behind each crossed pair.
  • Rim flares: Go down a hook size for the rim round only.
  • Holder tilts: The strap lines are not exactly opposite. Re-sew using the S/2 + 1 marker.
  • Jog at the color change: Make the join in the new color and pull the old strand snug inside.

Care

Hand wash in cool water and lay flat to dry, reshaping the baskets around a roll. Don’t hang it while wet, because the weight can stretch the straps.

Teal crocheted three-tier hanging toilet paper holder with cream lattice pattern on a bathroom wall beside a potted plant.

Final Notes

The measurement chain is short. The gauge of 12 sc per 4 in (10.2 cm) gives base diameters of 5.1, 5.7 and 6.4 in (13.0, 14.5 and 16.3 cm). Each larger basket adds one wall round, so the walls grow from 3.1 in (7.9 cm) to 3.7 in (9.4 cm). The 66-stitch straps fix the gaps at 2.7 in (6.9 cm), for a total hanging height of 21.8 in (55.4 cm). Check the first base and every later piece will fall into place.

Happy crocheting!

Leave a Comment