Seaglass Wheel Hanging Toilet Paper Holder Crochet Pattern

This three-tier hanging holder stores three standard toilet rolls in a column of lacy round baskets. Each basket has a solid cream base and a band of aqua spoked wheels set in cream lattice. A row of cream scallops finishes the top edge. Three aqua straps run down the outside and meet at a gold ring that hangs on a hook.

The palette is soft seaglass aqua and natural cream, which suits a calm, spa-style bathroom. The wheels read as small sunbursts, and the cream mesh between them lets the white paper show through.

All instructions use US crochet terms. Each basket measures about 5.5 in (14.0 cm) across and 4 in (10.2 cm) tall. The whole hanger is about 23 in (58.4 cm) long from the top of the ring to the bottom rings.

Construction is modular. You crochet three flat circular bases, eighteen square wheel motifs and three straps. Six motifs are joined into a ring, which is joined to a base. A scalloped edge goes around the top, then the straps are sewn on and fitted with rings.

Finished Size and Construction

  • Basket size: 5.5 in (14.0 cm) diameter, 17.3 in (43.9 cm) circumference, 4 in (10.2 cm) tall
  • Overall length: about 23 in (58.4 cm) including rings
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4 mm (US G-6)
  • Number of pieces: 3 bases, 18 motifs, 3 straps (24 pieces)
  • Layout: 6 motifs in a ring per basket, 3 baskets stacked
  • Piece size: motif 2.9 in (7.4 cm) square, 13 sts per side
  • Basket height before top edge: 3.5 in (8.9 cm)
  • Top edge (border) depth: 0.5 in (1.3 cm)

Materials

Use a smooth 100% cotton or cotton-blend worsted yarn. Cotton holds its shape, doesn’t stretch much, and copes well with bathroom humidity. Avoid acrylic, because these baskets sag under the weight of the rolls.

  • Cream: 220 g / 374 m (bases, motif lattice, edges)
  • Aqua: 110 g / 187 m (wheel centers, straps)

Quantities include roughly a 15% margin for your gauge swatch and tension differences.

Tools:

  • 4 mm (US G-6) crochet hook
  • One 2 in (5.1 cm) metal ring for hanging
  • Three 1 in (2.5 cm) metal rings for the strap ends
  • Tapestry needle
  • Stitch markers
  • Measuring tape
  • Rust-proof blocking pins and a blocking mat
  • Scissors

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • rep – repeat
  • beg – beginning

Special stitch – Shell: 5 dc in the same stitch.

Magic ring: an adjustable loop that you pull closed after the first round.

Gauge and Checkpoints

Gauge: 18 sc and 19 rows = 4 in (10.2 cm) in sc with a 4 mm hook. One sc is about 0.22 in wide and one row about 0.21 in tall.

The whole size chain is built on this gauge, so test one piece before you commit. Make one wheel motif first and block it lightly. It should measure 2.9 in (7.4 cm) per side. That’s 13 sts at 4.5 sts per inch.

Checkpoints:

  • Base after Round 5: 2.1 in (5.3 cm) across
  • Base after Round 10: 4.2 in (10.7 cm) across
  • Base after Round 13: 5.5 in (14.0 cm) across
  • Motif after Round 3: 2.6 in (6.6 cm) across
  • Motif after Round 5: 2.9 in (7.4 cm) per side
  • Strap after Row 1: 22.9 in (58.2 cm) long

If your motif is too big (more than 0.1 in / 0.3 cm over), go down a half size to 3.75 mm. If it’s too small, go up to 4.5 mm. Change hooks for every piece, not just the motifs, so the bases and bands still match stitch for stitch.

Close-up of a cream-colored crochet motif with a sage green eight-pointed star design at center.

Base (Make 3)

Use cream. Work in joined rounds and keep the right side facing you. Ch 1 at the start of a round does not count as a stitch.

Round 1: Make a magic ring, ch 1, 6 sc in ring, sl st to first sc. (6 sts)

Round 2: Ch 1, 2 sc in each st around, sl st to first sc. (12 sts)

Round 3: Ch 1, sc in next st, 2 sc in next st; rep from * around, sl st to first sc. (18 sts)

Round 4: Ch 1, sc in next 2 sts, 2 sc in next st; rep around, join. (24 sts)

Round 5: Ch 1, sc in next 3 sts, 2 sc in next st; rep around, join. (30 sts)

Rounds 6–13: Keep adding 6 sts per round. Work one more plain sc before each increase than you did in the previous round. Counts: Round 6 (36), Round 7 (42), Round 8 (48), Round 9 (54), Round 10 (60), Round 11 (66), Round 12 (72), Round 13 (78).

To keep the circle round instead of hexagonal, stagger the increases. On even rounds, start with half of the plain sc, increase, and finish the repeat at the end of the round.

Fasten off with a long tail. The base has 78 sts and measures 5.5 in (14.0 cm) across.

Wheel Motif (Make 18)

Round 1 (aqua): Make a magic ring, ch 3 (counts as dc), 15 dc in ring, sl st to top of beg ch-3. (16 dc)

Round 2 (aqua): Ch 4 (counts as tr), ch 1, tr in next dc, ch 1; rep around, sl st to 3rd ch of beg ch-4. (16 tr, 16 ch-1 sps)

The tr posts form the wheel’s spokes. Fasten off aqua.

Round 3 (cream): Join cream in any ch-1 sp. Ch 1, 2 sc in each ch-1 sp around, sl st to first sc. (32 sc)

Round 4 (cream, squaring): Ch 4 (counts as tr), (ch 3, tr) in same st for the first corner. Ch 2, sk 1, dc in next st, ch 2, sk 1, hdc in next st, ch 2, sk 1, dc in next st, ch 2, sk 1, (tr, ch 3, tr) in next st. Rep from * 2 more times. Finish with ch 2, sk 1, dc, ch 2, sk 1, hdc, ch 2, sk 1, dc, ch 2, sk 1, then sl st to top of beg ch-4.

That’s 8 tr, 8 dc, 4 hdc, 4 corner ch-3 sps and 16 ch-2 sps. Each side uses 8 sts of Round 3 (1 corner st + 7), and 4 × 8 = 32.

Round 5 (cream): Sl st into the corner ch-3 sp, ch 1. 3 sc in corner ch-3 sp, sc in tr, [sc in ch-2 sp, sc in next st] 3 times, sc in ch-2 sp, sc in tr. Rep from * around, sl st to first sc. (48 sc)

Per-side count: The middle sc of each 3-sc corner group is the corner stitch. Each side has 1 corner st + 11 sts + 1 corner st, which is 13 sts including both corners. Check: 4 × 13 − 4 shared corners = 48.

Fasten off and weave in the aqua ends.

Make All Pieces

Per basket: 1 base and 6 motifs.

Totals:

  • Cream: 3 bases, plus Rounds 3–5 on all 18 motifs
  • Aqua: Rounds 1–2 on all 18 motifs, plus 3 straps

Strap (make 3, aqua): Ch 104. Row 1: Sc in 2nd ch from hook and in each ch across, turn. (103 sc) Rows 2–5: Ch 1, sc in each st across, turn. (103 sc)

The strap measures 22.9 in (58.2 cm) long and about 1 in (2.5 cm) wide. Fasten off.

Layout per basket (motif ring, seen from above):

 [M1][M2][M3][M4][M5][M6] -> joins back to M1
   ^       ^       ^
  strap   strap   strap
 (M6/M1) (M2/M3) (M4/M5)

Joining

Motif ring: Hold two motifs right sides together with their side edges matched corner to corner. Using cream, sl st through both loops of both layers across all 13 sts. Join M1 to M2, then M2 to M3, and continue to M6. Then fold the strip and join M6 to M1 the same way to close the ring. Each basket has 6 vertical seams of 13 sts.

Work the seams with even, relaxed tension. If they’re tight, the band will pucker and the ring will come up short.

Band to base: Turn the band right side out and set the base inside its lower edge, wrong sides together. Each motif’s bottom side has 13 sts including its 2 corners, so the bottom edge of the band is 6 × 13 = 78 sts. Nothing extra sits at the seams, so this matches the base’s 78 sts exactly.

Join cream at the seam that will sit under a strap. Bottom Round 1: Ch 1, sc through one band st and one base st together, all the way around, sl st to first sc. (78 sc) Bottom Round 2: Ch 1, sc in each st around, join. (78 sc)

These two rounds make the solid cream rim at the base.

Size checkpoint: The basket should measure 17.3 in (43.9 cm) around. It should stand 3.5 in (8.9 cm) tall once you’ve added the first top round below.

Border (Scalloped Top Edge)

Border gauge: One shell repeat covers 6 sts, which is 1.3 in (3.4 cm) along the edge.

Top Round 1 (cream): Join at a seam. Ch 1, sc in each st across the top edge of the motifs, working 13 sts per motif, sl st to first sc. (6 × 13 = 78 sc)

Top Round 2 (shells): Ch 1, sc in first st. Sk 2 sts, shell in next st, sk 2 sts, sc in next st. Rep from * around. On the last repeat, replace the final sc with a sl st into the first sc.

That gives 13 shells and 13 sc.

Why the math works: 78 sts ÷ 6 sts per repeat = 13 repeats exactly, with nothing left over. Because each motif has 13 sts per side, the top edge always comes to 78 sts and the scallops close evenly at the join. The shells add 0.5 in (1.3 cm), so the basket finishes at 4 in (10.2 cm) tall.

Repeat the band, base and border steps for all three baskets.

Assembling the Hanger

Rings: Fold 1 in (2.5 cm) at one end of each strap around a 1 in (2.5 cm) ring and sew the fold down firmly. Thread the other end of all three straps through the 2 in (5.1 cm) ring. Fold each back 1.5 in (3.8 cm) and sew.

Each strap now has 20.4 in (51.8 cm) of working length between its two folds.

Basket positions: Measure up from the bottom ring fold and mark these positions:

Basket Starts at Ends at
Bottom 0.5 in (1.3 cm) 4.5 in (11.4 cm)
Middle 6 in (15.2 cm) 10 in (25.4 cm)
Top 11.5 in (29.2 cm) 15.5 in (39.4 cm)

That leaves 1.5 in (3.8 cm) of open strap between baskets. Above the top basket, 4.9 in (12.4 cm) of free strap angles in to the hanging ring.

Attach the straps: Place the straps over seams M6/M1, M2/M3 and M4/M5. These seams are 2 motifs (26 sts) apart, so the straps are spaced evenly at thirds. Whipstitch both long edges of each strap to the basket from the bottom rim to Top Round 1. Leave the scallops free.

Final Blocking

  1. Soak all three baskets in cool water for 10 minutes.
  2. Roll them in a towel and press out the excess water.
  3. Stuff each basket with a towel-wrapped jar or a roll of paper about 5.5 in (14.0 cm) across.
  4. Pin each scallop up and out so it forms an even arc.
  5. Flatten the bases on the mat.
  6. Pin the straps out straight and leave everything to dry completely.
  7. Once dry, measure each basket against the size chain.

Final Quality-Control Checklist

  • Every motif has 13 sts per side and 48 sts in Round 5
  • Every base has 78 sts
  • Each basket has 78 sts in the bottom rounds and the top round
  • There are 13 even shells around each basket
  • Baskets measure 5.5 in (14.0 cm) across and 4 in (10.2 cm) tall
  • Straps sit exactly over alternate seams
  • Basket gaps are 1.5 in (3.8 cm) on all three straps
  • The hanger hangs level, without twisting
  • All ends are woven in and the ring folds are sewn securely

Troubleshooting

Base ruffles: There are too many stitches for the size of the circle. Check that you have exactly 6 increases per round. If your counts are right, go down a hook size for the base.

Base cups: There are too few stitches. Recount for missed increases, or go up a hook size for the base.

Motifs won’t sit square: Check Round 4. Each side needs exactly 8 Round 3 sts, so recount your skips.

Band doesn’t fit the base: One motif is likely 12 or 14 sts per side. Recount each side, since every motif side must be exactly 13 sts.

Scallops don’t close evenly: The top round isn’t 78 sts. Rework Top Round 1.

Hanger tilts: The straps aren’t the same length, or a basket is set at the wrong height. Re-measure the folds and positions.

Baskets sag: The yarn is too stretchy, or the gauge is too loose. Use cotton and a smaller hook.

Care

Hand wash in cool water with mild soap, then reshape and lay flat to dry. Take off the metal rings first if you plan to machine wash on a gentle cycle.

Three-tier crocheted toilet paper holder in sage green and cream with floral patterns hanging from brass hooks in a bathroom.

Final Notes

The measurement chain is short. Gauge of 4.5 sts per inch gives a 13-st motif side of 2.9 in (7.4 cm). Six motifs make a 78-st band, 17.3 in (43.9 cm) around, which matches a 78-st base 5.5 in (14.0 cm) across. Those same 78 sts divide into 13 scallops, and the finished baskets are 4 in (10.2 cm) tall. With 1.5 in (3.8 cm) gaps, three baskets fill a 23 in (58.4 cm) hanger.

Check each link in the chain as you go and the pieces will fit together without any fudging.

Happy crocheting!

Leave a Comment