This Christmas bauble starts as a small flat rectangle. Raised diagonal ribs run across an open filet-style mesh. Once the panel is seamed, gathered and stuffed, the ribs wrap around the ball in a soft spiral. The result looks light and lacy, and the ribs give it enough structure to stay round.
The sample is sage green with a cream hanger loop and bow. The same pattern also looks good in dusty pink, cream or butter yellow, and a mixed set makes a calm, vintage-style tree. Use a smooth cotton so the ribs show clearly.
This pattern uses US crochet terms. The finished ornament is about 3.25 in (8.3 cm) across after stuffing, not counting the hanger. The flat panel with its border measures 9.75 in x 6 in (24.8 cm x 15.2 cm).
The construction is simple:
1. Crochet one rectangular panel in rows.
2. Add one round of sc border and block the panel.
3. Seam the short ends into a tube.
4. Gather the bottom, stuff, and gather the top.
5. Add a slip-stitch cord hanger and a bow.
Finished Size and Construction
- Finished ornament: about 3.25 in (8.3 cm) diameter, plus a 2.5 in (6.4 cm) hanger loop
- Skill level: Intermediate (post stitches, filet-style mesh)
- Terminology: US
- Yarn weight: DK / light worsted (3), cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 1 crocheted panel, plus a hanger cord and a bow cord
- Layout: one rectangular panel, seamed into a tube
- Panel size before border: 9.25 in x 5.5 in (23.5 cm x 14.0 cm)
- Border depth: 0.25 in (0.6 cm), 1 round of sc
- Panel size after border: 9.75 in x 6 in (24.8 cm x 15.2 cm)
Materials
Choose a smooth mercerized or combed cotton in DK weight, about 105-120 m per 50 g. Cotton keeps the raised ribs crisp and won’t fuzz over the mesh holes. Acrylic also works, but the spiral will be softer and less defined.
You can make a matching set from one ball of each color. A single 50 g ball of main color makes about four ornaments.
- Main color (sage green, or pink, cream or yellow): 12 g, about 26 m
- Contrast color (cream), for hanger and bow: 3 g, about 6 m
- 4.0 mm (G-6) crochet hook
- Tapestry needle
- Scissors
- Polyester fiberfill, about 10 g, or a 3 in (7.6 cm) foam ball
- Stitch markers (2-3)
- Pins and a blocking mat
- Spray bottle with water
The quantities include a margin of about 30% for checking gauge, seaming tails and small differences in tension.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- FPdc – front post double crochet
- BPdc – back post double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Special stitches and terms:
- Column: every other stitch in a row is a “column” stitch. It always sits on top of a column stitch in the row below. Each row has 19 columns, and the turning ch-3 counts as the first one.
- Open cell (O): ch 1, sk next st or ch-1 sp, dc in next column.
- Block cell on a RS row (B): dc in next st or ch-1 sp, FPdc around the post of next column.
- Block cell on a WS row (B): dc in next st or ch-1 sp, BPdc around the post of next column.
- Edge rule: when a block cell is the last cell of a row, work its column as a regular dc in the 3rd ch of the turning ch.
Each row has 18 cells of 2 sts each, plus the starting column, for 37 sts. The ch-1 spaces count as sts.
Gauge and Checkpoints
Gauge: 16 sts and 8 rows = 4 in (10.2 cm) in the rib-mesh pattern, after light blocking.
This is a small single piece, so the panel itself is your test piece. Work the first few rows, then measure before you go on.
- After Row 1: 37 dc should measure 9.25 in (23.5 cm) wide.
- After Row 5: the panel should be 2.5 in (6.4 cm) tall, and you should see the first diagonal rib forming.
- After Row 11: the panel should be 9.25 in x 5.5 in (23.5 cm x 14.0 cm).
- After the border: 9.75 in x 6 in (24.8 cm x 15.2 cm).
- After seaming: the tube should measure 9.75 in (24.8 cm) around.
If the panel is too big, go down to a 3.75 mm hook. If it’s too small, go up to a 4.5 mm hook. A 0.5 in (1.3 cm) difference in width changes the ball’s diameter by only about 0.125 in (0.3 cm), so small differences are fine. Row height matters more: keep the rows square so the spiral stays at 45 degrees.

The Panel
On every row, the block cells move one cell to the left (as seen from the RS). Rows 2-7 form a 6-row repeat.
Foundation: With main color, ch 39.
Row 1 (RS): Dc in 4th ch from hook (the skipped ch count as the first dc) and in each ch across, turn. (37 dc)
Row 2 (WS): Ch 3 (counts as first column), O, B, O; rep from * 5 more times, turn. (37 sts: 19 columns, 6 fill dc, 12 ch-1 sp)*
In this row, the block cells sit on the solid dc of Row 1. Each fill dc goes into a dc, and each BPdc goes around a dc.
Row 3 (RS): Ch 3, O, O, B; rep from * 5 more times, turn. Use the edge rule for the last block. (37 sts)*
Row 4 (WS): Ch 3, O, O, B; rep from * 5 more times, turn. Use the edge rule for the last block. (37 sts)*
Row 5 (RS): Ch 3, O, B, O; rep from * 5 more times, turn. (37 sts)*
Row 6 (WS): Ch 3, B, O, O; rep from * 5 more times, turn. (37 sts)*
Row 7 (RS): Ch 3, B, O, O; rep from * 5 more times, turn. (37 sts)*
Rows 8-11: Repeat Rows 2-5. (37 sts in each row)
Don’t fasten off. You now have 11 rows: 1 solid foundation row and 10 pattern rows. Every pattern row has 6 block cells and 12 open cells.
Post stitch tips: From Row 3 on, a block’s fill dc usually goes into a ch-1 sp. Insert the hook under the chain, not into it, so the hole stays square. Work the post stitches at the same height as the plain dc. If you pull them tight, the panel will be shorter than 5.5 in (14.0 cm).
Why it spirals: Each row, the block cells move over one cell (2 sts, or 0.5 in / 1.3 cm). Each row is also 0.5 in (1.3 cm) tall, so the ribs run at 45 degrees. The 18 cells make exactly 6 repeats of 3 cells, so after seaming, the ribs continue across the seam without a break.
Border
Border gauge: 4 sc per 1 in (2.5 cm) on every side. On the top and bottom edges, that means 1 sc per st. On the sides, it means 2 sc per dc row-end, because each row is 0.5 in (1.3 cm) tall.
Round 1 (RS): Don’t turn. With the RS facing, ch 1, then work:
- Corner: 3 sc in the last dc of Row 11.
- Left side: working down the row-ends, 2 sc in each of the 11 row-ends. (22 sc)
- Bottom edge: working in the free loops of the foundation ch, 3 sc in first ch (corner), sc in each of next 35 chs, 3 sc in base of the Row 1 turning ch (corner).
- Right side: 2 sc in each of the 11 row-ends. (22 sc)
- Top edge: 3 sc in top of the Row 11 turning ch (corner), sc in each of next 35 sts and ch-1 sps.
Join with sl st to the first sc. Fasten off, leaving a 16 in (40.6 cm) tail for seaming.
Counts: The center sc of each 3-sc group is the corner stitch. Each side’s count includes both of its corners.
- Top and bottom edges: 1 + 1 + 35 + 1 + 1 = 39 sc each
- Each short side: 1 + 1 + 22 + 1 + 1 = 26 sc each
- Total: 39 + 26 + 39 + 26 − 4 shared corners = 126 sc
Why the math works: The top and bottom edges each have 37 sts. The 2 end sts get 3-sc corner groups and the other 35 get 1 sc each, so the edge is neither stretched nor crowded. The sides have 11 rows at 0.5 in (1.3 cm) each, which is 5.5 in (14.0 cm). The 22 sc at 4 sc per inch also measure 5.5 in (14.0 cm). The border adds 0.25 in (0.6 cm) on every side, which brings the panel to 9.75 in x 6 in (24.8 cm x 15.2 cm).
Hanger Cord and Bow
With cream:
Hanger cord: Ch 26. Sl st in 2nd ch from hook and in each ch across. (25 sl st, about 5 in / 12.7 cm) Fasten off, leaving a 6 in (15.2 cm) tail.
Bow cord: Ch 46. Sl st in 2nd ch from hook and in each ch across. (45 sl st, about 9 in / 22.9 cm) Fasten off and weave in both ends.
Work the sl sts snugly. This makes a firm, rounded cord that looks like a twisted rope.
Final Blocking and Assembly
- Block flat. Pin the bordered panel RS up to 9.75 in x 6 in (24.8 cm x 15.2 cm). Keep the mesh holes square and the ribs straight.
- Mist and dry. Spray the panel until it’s damp, then let it dry completely. Cotton holds this shape well.
- Seam. Fold the panel RS out so the short sides meet. With the long tail, whipstitch through the back loops of matching sc, st for st: 26 pairs, corner to corner. Check that the ribs line up across the seam.
- Gather the bottom. On one open edge, thread a 10 in (25.4 cm) length of main color through the front loop of each of the 37 sc between the two seam corners. Pull tight, knot securely and push the tail inside.
- Stuff. Fill firmly with fiberfill, or insert the 3 in (7.6 cm) foam ball. Push the stuffing out toward the sides so the ball stays round and doesn’t look like a cylinder.
- Gather the top. Repeat step 4 on the top edge, adding any last bits of stuffing before you close it. Pull tight and knot.
- Shape. Roll the ball between your palms, mist lightly and let it dry so the ribs settle into an even spiral.
- Add the hanger. Fold the hanger cord in half to make a 2.5 in (6.4 cm) loop. Sew both ends firmly over the top gather.
- Add the bow. Tie the bow cord into a bow about 2 in (5.1 cm) wide. Sew the knot to the base of the hanger, then trim the bow tails and tack them down so they lie on the ball.
Final Quality-Control Checklist
- Every pattern row has 37 sts: 6 block cells and 12 open cells.
- The ribs run in one direction at about 45 degrees, with no doubled or skipped steps.
- The bordered panel blocked to 9.75 in x 6 in (24.8 cm x 15.2 cm).
- The border has 126 sc: 39 on each long side and 26 on each short side.
- The seam is flat and the ribs continue across it.
- Both gathers are fully closed, with no stuffing showing.
- The ball is about 3.25 in (8.3 cm) across and evenly round.
- The hanger and bow are sewn on securely and centered over the top gather.
Troubleshooting
- The ribs run straight up instead of diagonally: you repeated a row. Check your rows against the sequence O-B-O, O-O-B, O-O-B, O-B-O, B-O-O, B-O-O.
- The ribs zigzag: you reversed the cell order on a WS row. Every row starts with ch 3 and works the cells in the order written.
- The ribs lie flat on the RS: use FPdc on RS rows and BPdc on WS rows.
- The panel edges slant: count the turning ch-3 as a column, and work the last column into its top.
- The border ruffles or cups: keep every count the same, but go down one hook size for the border if it ruffles, or up one size if it cups.
- The ball looks like a barrel: add more stuffing at the middle, or use the foam ball.
- A gather leaves a hole: thread through both loops of each sc and tighten again.
Care
Spot clean with a damp cloth and mild soap, then reshape and air dry. Store the ornaments in a box with tissue so the ribs don’t get crushed.

Final Notes
The measurements build on each other in a short chain that’s easy to check. Row 1 has 37 sts and measures 9.25 in (23.5 cm). Eleven rows make 5.5 in (14.0 cm). The 126-sc border brings the panel to 9.75 in x 6 in (24.8 cm x 15.2 cm). Seaming makes a tube 9.75 in (24.8 cm) around, and stuffing turns it into a 3.25 in (8.3 cm) spiral bauble. Make your first one in sage green, then try pink, cream and yellow for a full set on the tree.
Happy crocheting!