This three-tier holder stacks three heart-based baskets on two slim straps and hangs from a single wall peg. Each basket holds one standard toilet roll, and the open mesh lets you see at a glance when you need to restock.
The palette is soft blush pink with deep raspberry trim. Each basket has a solid lower band, a diamond lattice in the middle and a bold raspberry rim. Across the front, a raspberry chevron dips into a V, like the top of a heart.
The pattern uses US crochet terms. Each basket is 5.5 in (14.0 cm) wide and 3.75 in (9.5 cm) tall. The assembled holder hangs about 20 in (50.8 cm) from the peg to the bottom of the lowest basket and is about 6 in (15.2 cm) wide.
Here’s how it’s made. You work each basket from the bottom up: a round base reshaped into a heart, a turned-up solid band, mesh rounds, and then the raspberry rim and chevron. You crochet two flat straps and sew them down the sides of all three baskets. Then you overlap the strap tops to form the hanging loop.
Finished Size and Construction
- Finished size: about 6 in (15.2 cm) wide × 20 in (50.8 cm) hanging length
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 5 (3 baskets + 2 straps)
- Layout: 3 baskets stacked vertically, 1.5 in (3.8 cm) apart
- Basket size: 5.5 in (14.0 cm) wide × 3.75 in (9.5 cm) tall
- Wall height before border: 3.3 in (8.4 cm)
- Border depth: about 0.45 in (1.1 cm), plus the surface chevron
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton holds the basket shape, survives a steamy bathroom and blocks crisply. Avoid acrylic: it sags under the weight of the rolls.
- Blush pink (MC): 150 g, about 230 m (252 yd)
- Raspberry (CC): 50 g, about 77 m (84 yd)
Tools:
– 4.5 mm (US 7) crochet hook
– 6 stitch markers
– Tapestry needle
– Rust-proof pins
– Measuring tape
– 1 toilet roll or similar jar for shaping
All quantities include a margin of roughly 25% for gauge swatches and differences in tension.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- BLO – back loop only
- sp – space
- st(s) – stitch(es)
- MR – magic ring
- rnd – round
Special stitch: surface slip stitch. Hold the yarn behind the work. Insert the hook from front to back at the marked point, pull up a loop, and draw it through the loop on your hook. This forms a chain-like line on the right side.
Gauge and Checkpoints
Gauge: 16 sc × 18 rnds = 4 in (10.2 cm) in sc worked in joined rounds.
Make one complete basket before starting the others and check it against these points:
- Base Rnd 5 (30 sts): 2.4 in (6.1 cm) across
- Base Rnd 10 (60 sts): 4.75 in (12.1 cm) across, lying flat
- Base Rnd 11 (68 sts): heart is 5.5 in (14.0 cm) wide × 5.25 in (13.3 cm) tall
- Wall W4: solid band is about 0.9 in (2.3 cm) tall
- Wall W10: wall is 3.3 in (8.4 cm) tall
- After T2: wall is 3.75 in (9.5 cm) tall; the opening is about 17 in (43.2 cm) around, roughly 5.4 in (13.7 cm) across
Too big? Go down one hook size. Too small, or the roll won’t slide in? Go up one size. A standard roll is about 4.5 in (11.4 cm) across, so make sure it drops in easily.
If the base cups before Rnd 10, your increases are too tight; go up a hook size for the base only. If it ruffles, go down a size.

Basket (Make 3)
Heart Base
With MC, work in joined rounds. The ch 1 at the start of each round does not count as a stitch.
Rnd 1: 6 sc in MR, join with sl st to the first sc. (6)
Rnd 2: Ch 1, 2 sc in each st around, join. (12)
Rnd 3: Ch 1, sc in next st, 2 sc in next st 6 times, join. (18)
Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st 6 times, join. (24)
Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st 6 times, join. (30)
Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st 6 times, join. (36)
Rnd 7: Ch 1, sc in next 5 sts, 2 sc in next st 6 times, join. (42)
Rnd 8: Ch 1, sc in next 6 sts, 2 sc in next st 6 times, join. (48)
Rnd 9: Ch 1, sc in next 7 sts, 2 sc in next st 6 times, join. (54)
Rnd 10: Ch 1, sc in next 8 sts, 2 sc in next st 6 times, join. (60)
Rnd 11 (heart-shaping conversion round): This round changes the circle into a heart by varying stitch heights. The first stitch is the top-center dip, and the 31st stitch is the bottom point.
Ch 1. Then:
– Sl st in st 1 (dip).
– Sc in sts 2–3.
– Hdc in sts 4–5.
– Dc in st 6; 2 dc in st 7; dc in st 8; 2 dc in st 9; dc in st 10; 2 dc in st 11 (left lobe).
– Hdc in sts 12–14.
– Sc in sts 15–30.
– (Dc, tr, dc) in st 31 (point).
– Sc in sts 32–47.
– Hdc in sts 48–50.
– 2 dc in st 51; dc in st 52; 2 dc in st 53; dc in st 54; 2 dc in st 55; dc in st 56 (right lobe).
– Hdc in sts 57–58.
– Sc in sts 59–60.
Join to the first sl st.
Count: 60 sts worked 1 per existing st + 8 extra (6 lobe increases + 2 at the point) = 68 sts. The sl st counts as a stitch.
Number the Rnd 11 stitches 1–68 for the wall. St 1 is the sl st at the back center. St 35 is the tr at the front point. Sts 18 and 52 are the side lines, where the straps go. Place markers in sts 18, 35 and 52.
Wall
W1: Ch 1, sc in BLO of each st around, join. (68) The unworked front loops form a crisp fold where the base meets the wall.
W2–W4: Ch 1, sc in each st around, join. (68) Checkpoint: about 0.9 in (2.3 cm) of solid band.
W5 (mesh setup): Ch 1, sc in st 1, ch 3, sk next st, sc in next st to the last st, then ch 3, sk st 68, and join to the first sc.
Count: 34 sc + 34 ch-3 sps. The sc sit on the odd stitches 1–67, so one lands exactly on front-center st 35.
W6: Sl st into the first ch-3 sp, ch 1, sc in the same sp, ch 3, sc in next ch-3 sp 33 times, ch 3, join to the first sc. (34 sc, 34 ch-3 sps)
W7–W10: Repeat W6. (34 sc, 34 ch-3 sps each round)
Each round’s sc (the “knots”) sit in the middle of the loops below, so the knots shift by one stitch position each round:
– Odd rounds (W5, W7, W9): knots line up over the odd positions, including front center 35.
– Even rounds (W6, W8, W10): knots line up over the even positions, including the side lines 18 and 52.
This alternation creates the diamond lattice. Checkpoint: the wall is 3.3 in (8.4 cm) tall. Fasten off MC.
Make All Pieces
Straps (make 2): With MC, ch 89.
Row 1: Sc in the 2nd ch from hook and in each ch across, turn. (88)
Rows 2–3: Ch 1, sc in each st across, turn. (88)
Fasten off. Each strap is 22 in (55.9 cm) × 0.75 in (1.9 cm).
Total pieces:
– MC: 3 basket bodies and 2 straps
– CC: borders on 3 baskets (worked in the next section, before joining)
Layout grid (front view):
/\ ← strap tops overlapped (hanging loop)
/ \
| B1 | ← basket 1 (top)
| | ← 1.5 in (3.8 cm) gap
| B2 | ← basket 2
| | ← 1.5 in (3.8 cm) gap
| B3 | ← basket 3 (bottom)
Border
Work this on each basket before joining.
Border gauge: the same 16 sc = 4 in (10.2 cm). For counting, split the 68 rim stitches into a front half (34 sts) and a back half (34 sts), divided at the side lines.
T1 (conversion round): With CC, join in the first ch-3 sp of W10. Ch 1, work 2 sc in each ch-3 sp around, join.
Count: 34 sps × 2 sc = 68 sts (34 front, 34 back).
Why it works: each ch-3 loop replaced 2 wall stitches back in W5 (1 sc + 1 skipped st). Two sc per loop restores exactly the 68 stitches of the solid band, so the rim matches the base and doesn’t flare or pull in.
T2: Ch 1, sc in each st around, join. (68: 34 front, 34 back)
Fasten off and weave in the ends. Checkpoint: the wall is 3.75 in (9.5 cm) tall.
Front chevron (surface slip stitch): Hold two strands of CC together. Work only across the front half, between the side markers, inserting the hook at the mesh knots in this order:
- Start in the T1 st directly above left side line 18. (1 point)
- Work along the W10 knots at positions 18, 20, 22, 24, 26, 28, 30, 32. (8 points)
- Go diagonally down: W9 knot at 33, W8 knot at 34. (2 points)
- W7 knot at front-center position 35, the tip of the V. (1 point)
- Go diagonally up: W8 knot at 36, W9 knot at 37. (2 points)
- Work along the W10 knots at 38, 40, 42, 44, 46, 48, 50, 52. (8 points)
- Finish in the T1 st above right side line 52. (1 point)
Total: 23 points, mirrored around point 35. The diagonal steps follow the mesh’s natural one-stitch shift per round, so the V sits square on the diamonds. Fasten off and weave in the ends on the wrong side.
Joining
Method: Whipstitch the straps to the outside of the baskets with MC and a tapestry needle.
Stitch-to-stitch logic: Count from the starting end of each strap (st 1) and mark the zones:
| Strap sts | Length | Zone |
|---|---|---|
| 1–4 | 1 in (2.5 cm) | top overlap |
| 5–30 | 6.5 in (16.5 cm) | free diagonal to the hook |
| 31–45 | 3.75 in (9.5 cm) | basket 1 |
| 46–51 | 1.5 in (3.8 cm) | gap |
| 52–66 | 3.75 in (9.5 cm) | basket 2 |
| 67–72 | 1.5 in (3.8 cm) | gap |
| 73–87 | 3.75 in (9.5 cm) | basket 3 |
| 88 | 0.25 in (0.6 cm) | tuck under base |
Check: 4 + 26 + 15 + 6 + 15 + 6 + 15 + 1 = 88. The table matches the strap exactly.
Attaching the baskets:
1. Center one strap vertically over side line 18 of each basket and the other strap over side line 52.
2. Line up each zone’s first stitch with the top of T2 and its last stitch with the fold at W1.
3. Pin all three baskets before sewing.
4. Whipstitch both long edges of the strap through the solid rounds, the mesh knots on the side line, and the rim.
5. Fold strap st 88 under the base edge and tack it down.
Hanging loop: Lay strap sts 1–4 of one strap over sts 1–4 of the other so they form a peak. Sew around all four edges of the overlap.
Tension: Sew firmly but don’t pucker. Each 15-stitch zone should still measure 3.75 in (9.5 cm) after sewing.
Size checkpoint: Hang the holder from its loop. It should measure about 20 in (50.8 cm) from the peak to the bottom, with 1.5 in (3.8 cm) gaps between baskets.
Final Blocking
- Wet the holder thoroughly in cool water and gently squeeze it out. Don’t wring it.
- Roll it in a towel to remove excess water.
- Push a toilet roll or similar jar into each basket so the walls dry upright and evenly round.
- Pinch each heart point and each chevron V into shape with your fingers.
- Lay the straps straight and pin them so the gaps are 1.5 in (3.8 cm) and the hanging loop is symmetrical.
- Let it dry completely, about 24 hours, before hanging it.
Final Quality-Control Checklist
- Each heart base has 68 sts, with the point centered at front st 35.
- The solid band is 4 rounds and the BLO fold is crisp all the way around.
- The mesh has 34 loops per round with no skipped or doubled loops.
- T1 and T2 each have 68 sts.
- Each chevron uses 23 points and is symmetrical around front center.
- The straps are 88 sts long and sit centered on side lines 18 and 52.
- The gaps between baskets measure 1.5 in (3.8 cm).
- All ends are woven in on the wrong side.
Troubleshooting
The heart looks like a circle. Make the lobe stitches true dc and pull the point tr up to full height. Block firmly.
The mesh slants. Make sure you start each round in the first ch-3 sp, not in the sc.
The rim flares. Your T1 sc are too loose. Go down a hook size for T1–T2 only.
The roll is too tight. Go up a hook size for the whole basket. Don’t add stitches, because that would throw off the mesh math.
The V is off-center. Recount the W7 knots from back-center st 1; the tip belongs at position 35.
The baskets tilt. Re-pin the straps exactly over 18 and 52 and resew.
Care
Hand wash in cool water and lay flat to dry, using a roll inside each basket to keep the shape. Avoid the dryer, which can shrink cotton unevenly.

Final Notes
Here is the measurement chain:
– The 60-st circle at 4.75 in (12.1 cm) becomes a 68-st heart 5.5 in (14.0 cm) wide.
– Those 68 sts carry straight up through the wall.
– The mesh uses 34 loops, which convert back to 68 rim sts.
– The wall finishes 3.75 in (9.5 cm) tall.
– Each 88-st strap divides exactly into overlap, diagonal, three 15-st basket zones, two 6-st gaps and a 1-st tuck.
– The result hangs about 20 in (50.8 cm) and is about 6 in (15.2 cm) wide.
Check each stage against your gauge, and the holder will come together square and sturdy. Happy crocheting!