Teal Ginkgo Fan Strand Curtain Crochet Pattern

This curtain is made of eight light, airy strands, each one a cream chain “branch” covered in teal fans that look like ginkgo leaves. Light passes through the open spokes, so the curtain softens a doorway or window without blocking it.

Two colors are used: cream for the stem, arms, and spokes, and a deep teal for the scalloped fan edges. The look is part boho, part botanical, and it suits wood tones and houseplants well. The pattern uses US crochet terms throughout.

Each finished strand measures 15 in (38.1 cm) long and 6.5 in (16.5 cm) wide. Eight strands spaced 6 in (15.2 cm) apart give a curtain about 48.5 in (123.2 cm) wide.

Construction is simple. You work each strand in cream from the hanging loop downward, making spokes and arms as you go, then slip stitch back up the stem to firm it. Next you add the teal edging to each of the 11 fans. The strands are never joined to each other; they hang separately from a rod.

Finished Size and Construction

  • Finished strand size: 15 in (38.1 cm) long x 6.5 in (16.5 cm) wide
  • Finished curtain width: about 48.5 in (123.2 cm) with 8 strands
  • Skill level: Easy-intermediate
  • Terminology: US terms
  • Yarn weight: DK / light worsted (3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 8 separate strands, 11 fans each
  • Layout: 8 strands in one row, 6 in (15.2 cm) apart center to center
  • Single fan size: 3 in (7.6 cm) wide x 2 in (5.1 cm) tall
  • Strand size before border (cream only): 15 in (38.1 cm) x 5 in (12.7 cm)
  • Border depth (teal fan edging): 0.75 in (1.9 cm)

Materials

Use a smooth, mercerized or combed cotton in DK weight, around 125 m per 50 g. Cotton holds the spoke shape well after blocking and does not stretch much under its own weight. Avoid fuzzy or very stretchy yarns, because they blur the spokes and let the strands grow.

  • Cream (stem and spokes): 75 g / 190 m
  • Teal (fan edging): 100 g / 250 m

Quantities include a margin of about 40% over the measured use (about 16 m cream and 22 m teal per strand).

Tools:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers
  • Rust-proof pins and a blocking board or foam mat
  • Spray bottle
  • Wooden rod at least 52 in (132.1 cm) long, plus 8 small S-hooks or rings (optional)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sp – space
  • st(s) – stitch(es)

Special stitch: Spoke. Ch 8, sl st in 2nd ch from hook and in each of next 6 ch. You end back at the base of the spoke. Each spoke is 7 sl sts long (1.4 in / 3.6 cm), and the skipped ch at its end is the spoke tip.

Shell: 5 dc in the same st.

Gauge and Checkpoints

Chain gauge: 5 ch = 1 in (2.5 cm), so 10 ch = 2 in (5.1 cm).

Make one complete strand, edging included, before you start the other seven. That one strand is your gauge swatch, and it tells you exactly how the curtain will look.

Checkpoints:

  1. One spoke: 1.4 in (3.6 cm) from base to tip.
  2. Top stem (12 ch): 2.4 in (6.1 cm).
  3. Each level spacing (10 ch): 2 in (5.1 cm).
  4. Cream strand after reinforcement: 15 in (38.1 cm) from top of loop to tail end.
  5. One edged fan: 3 in (7.6 cm) wide x 2 in (5.1 cm) tall.
  6. Edged strand, blocked: 15 in (38.1 cm) x 6.5 in (16.5 cm).

If your strand is too long: go down to a 3.25 mm hook, or tighten your chains. If it is too short: go up to a 3.75 mm hook. When you slip stitch back up the stem, keep the tension even with your chain tension. Tight slip stitches shorten the stem, and loose ones let it stretch.

Crocheted textile with teal scallop and cream fan motifs hanging from rope on wooden rod.

Part 1: Cream Strand (Stem, Arms, and Spokes)

With cream, work from the top down.

Hanging loop: Ch 10, sl st in first ch to form a ring. (10 ch; the loop lies about 1 in / 2.5 cm long when flat.)

Top stem: Ch 12. (12 ch, 2.4 in / 6.1 cm.)

Top fan base: Work 5 Spokes, all from the last stem ch. (5 spokes.)

Place a marker on the 5th spoke so you know where the top fan ends.

Level 1:

  1. Stem segment: Ch 10. (10 ch, 2 in / 5.1 cm.)
  2. Left arm: Ch 4, work 5 Spokes from the last arm ch, then sl st in the back bump of each of the 4 arm ch back toward the stem. (4 ch, 5 spokes, 4 sl st.)
  3. Right arm: Ch 4, work 5 Spokes from the last arm ch, then sl st in the back bump of each of the 4 arm ch back toward the stem. (4 ch, 5 spokes, 4 sl st.)

After the right arm you are back at the junction point at the bottom of the stem segment.

Levels 2 to 5: Repeat Level 1 four more times. (5 levels total, 10 side fans.)

Tail: Ch 8. (8 ch, 1.6 in / 4.1 cm.)

Stem reinforcement: Turn the strand so the stem chain runs back up toward the loop. Sl st in the back bump of each stem ch all the way up to the loop: 8 tail ch + 5 x 10 segment ch + 12 top stem ch = 70 sl st. Slide past each arm junction and the top fan base without working into the arms or spokes. Sl st into the base of the hanging loop, fasten off, and weave in the ends.

Stitch count check for one cream strand:

  • Stem: 12 + 50 + 8 = 70 ch, reinforced with 70 sl st
  • Stem length: 70 ch / 5 per in = 14 in (35.6 cm), plus 1 in (2.5 cm) loop = 15 in (38.1 cm)
  • Fans: 1 top + 10 side = 11 fans
  • Spokes: 11 x 5 = 55 spokes
  • Arms: 10 arms of 4 ch each

The reinforcement row fixes the length. If you are 0.25 in (0.6 cm) or more off at Checkpoint 4, fix it now, before the teal goes on.

Make All Pieces

Make 8 identical cream strands (Part 1), then edge every fan with teal (see Border below) before blocking and hanging.

Totals for the curtain:

  • Cream: 8 strands, 440 spokes, 80 arms, 560 stem ch
  • Teal: 88 fan edgings (11 per strand)

Layout grid (front view, rod across the top):

Rod: ==S1====S2====S3====S4====S5====S6====S7====S8==
Spacing:  6 in (15.2 cm) center to center, 7 gaps = 42 in (106.7 cm)
Each Sx:  loop / top fan / 5 levels of paired fans / tail

Mark the rod positions at 0, 6, 12, 18, 24, 30, 36, and 42 in (0, 15.2, 30.5, 45.7, 61.0, 76.2, 91.4, and 106.7 cm).

Joining (Hanging, No Seams)

The strands are not crocheted to each other. Each one hangs from its own loop, so the curtain parts easily when you walk through it.

Method: Slip each hanging loop over the rod, or hang it from a small S-hook or ring on the rod, at the marked positions.

Stitch-to-stitch logic: No stitches join one strand to another. The only fixed points are the 10-ch loops, so the loops have to be identical. Compare all 8 loops before you hang anything; if one is bigger, redo it so the fans line up level by level across the curtain.

Tension advice: Make all 8 strands in as few sittings as you can. Chain tension tends to drift from day to day, and a 2-ch difference per segment adds up to 2 in (5.1 cm) over the length of a strand.

Size checkpoint: Once hung, the outer edges of strands 1 and 8 should be about 48.5 in (123.2 cm) apart (42 in / 106.7 cm between centers plus half of 6.5 in / 16.5 cm on each side). The side fans of neighboring strands should almost touch, with a gap of about 0.5 in (1.3 cm).

Border: Teal Fan Edging

The border is the teal arc worked across the 5 spoke tips of each fan. Work it on all 11 fans of each strand.

Border gauge: One 3-dc group plus its ch-1 sp covers about 0.6 in (1.5 cm) of arc. The finished two-row band is 0.75 in (1.9 cm) deep.

Lay the strand flat with the spokes of the fan fanned out evenly before you start, so you can see which tip comes next.

Row 1: Join teal in the tip of the leftmost spoke. Ch 3 (counts as dc), 2 dc in the same tip, *ch 1, 3 dc in the tip of the next spoke; repeat from * 3 more times. Turn. (15 dc in 5 groups of 3 + 4 ch-1 sp = 19 sts.)

Row 2: Ch 1, sc in the first dc, Shell in the next dc (center of group 1), *sc in the next ch-1 sp, skip the next dc, Shell in the next dc (center of the next group); repeat from * 3 more times, sc in the top of the turning ch-3. (5 shells = 25 dc, plus 6 sc = 31 sts.)

Fasten off, leaving a 4 in (10.2 cm) tail. Weave the tails into the back of the teal band, not into the spokes, where they would show.

Per fan: Row 1 = 19 sts, Row 2 = 31 sts. Per strand: 11 fans x 31 = 341 sts in the outer row. Per curtain: 88 fans.

Why the math works:

  • 5 spokes give 5 dc groups, and each group gets exactly 1 shell, so the 5 scallops sit directly over the 5 spokes.
  • The odd spoke count puts the 3rd scallop on the center spoke. On the top fan that is the stem line; on the side fans it is the arm line, so every fan comes out symmetrical.
  • Row 2 uses every ch-1 sp once (4 sc), the center dc of every group once (5 shells), and both edge sts once (2 sc). Skipping the outer dc of each group is what lets the shells curve outward instead of cupping.
  • The 3 dc per tip spread the spoke tips about 0.6 in (1.5 cm) apart, which turns the 1.4 in (3.6 cm) spokes into a 3 in (7.6 cm) wide fan.

Final Blocking

  1. Wet each strand thoroughly, or spray until damp all the way through.
  2. Press out the excess water in a towel; don’t wring it.
  3. Pin the hanging loop to the board, then pin the tail end so the stem is straight and 15 in (38.1 cm) long.
  4. Angle each arm upward and outward at about 45 degrees.
  5. Fan the 5 spokes of each fan evenly upward and pin the outer edge of the teal band into a smooth arc 3 in (7.6 cm) wide.
  6. Pin the center of each scallop so the 5 bumps open up.
  7. Check the overall width: 6.5 in (16.5 cm) across the widest pair of fans.
  8. Let it dry completely before unpinning, usually 12 to 24 hours.

Final Quality-Control Checklist

  • All 8 strands are 15 in (38.1 cm) long, give or take 0.25 in (0.6 cm).
  • Each strand has 11 fans: 1 top fan and 5 pairs.
  • Each fan has exactly 5 spokes and 5 scallops.
  • Row 1 of every fan has 15 dc and 4 ch-1 sp.
  • Row 2 of every fan has 5 shells and 6 sc.
  • The stem reinforcement covers all 70 stem ch.
  • All 8 hanging loops are the same size.
  • No ends show on the front of the spokes.
  • The fans line up level by level across the hung curtain.

Troubleshooting

The spokes curl or twist. Your sl sts are tighter than your ch. Loosen the sl sts and block with pins at each spoke tip.

The fan cups instead of lying flat. You probably worked into the outer dc of the groups in Row 2. Skip them exactly as written.

The fan ruffles. Your dc are loose. Go down 0.25 mm for the teal only.

Can’t find the spoke tip. Insert the hook under both loops of the skipped ch at the very end of the spoke. Marking the tips before Row 1 helps.

The strand stretched after hanging. Re-block it, and check that the stem reinforcement went into every back bump.

Fan levels don’t align between strands. One strand has an extra or missing stem ch. Count the segments (12, 10, 10, 10, 10, 10, 8) and fix that segment.

Care

Hand wash in cool water with a mild detergent, then reblock flat to dry. Dust the curtain now and then by shaking it gently, or with a hair dryer on the cool setting.

Teal crocheted fan motifs with cream centers displayed on a wooden table with measurements.

Final Notes

Each measurement depends on the one before it. A 5-ch-per-inch gauge gives 1.4 in (3.6 cm) spokes and 2 in (5.1 cm) level spacing. That makes a 15 in (38.1 cm) cream strand that is 5 in (12.7 cm) wide. The teal edging, 0.75 in (1.9 cm) deep, turns each 5-spoke cluster into a 3 in (7.6 cm) fan and brings the strand to 6.5 in (16.5 cm) wide. Eight strands at 6 in (15.2 cm) centers then make a curtain about 48.5 in (123.2 cm) wide. If you check your first strand at every checkpoint, the other seven will match.

Happy crocheting!

Leave a Comment