Trellis Cove Lattice Basket Crochet Pattern

The Trellis Cove Basket is a long, low oval basket with open lattice sides. Its solid oval base keeps it steady on a shelf or counter. The walls are a diamond trellis that lets rolled towels, washcloths or spare toilet rolls show through. A solid rim with two built-in handle slots finishes the top and makes it easy to lift.

The whole basket is worked in one cream cotton. Bulky cotton gives the lattice a rope-like look and keeps the walls firm enough to stand on their own. The style is calm and natural and suits bathrooms, nurseries and entryways.

This pattern uses US crochet terms. The finished basket measures about 12 in long x 5.25 in wide x 5.75 in tall (30.5 x 13.3 x 14.6 cm).

You start with an oval base in double crochet worked around a foundation chain. A back-loop round turns the edge upward. The walls are six rounds of chain-loop diamond mesh, followed by a solid rim with handle slots and a reverse single crochet edge. There is no sewing and no joining.

Finished Size and Construction

  • Finished size: 12 in x 5.25 in x 5.75 in tall (30.5 x 13.3 x 14.6 cm)
  • Skill level: Easy–Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Bulky (#5) cotton
  • Hook: 6.0 mm (US J-10)
  • Number of pieces: 1 (worked seamlessly in the round)
  • Layout: Oval base, lattice walls, solid rim with 2 handle slots
  • Base size: 12 x 5.25 in (30.5 x 13.3 cm)
  • Height before rim: about 4.2 in (10.7 cm)
  • Rim depth: about 1.5 in (3.8 cm)

Materials

Yarn: Use a bulky (#5) 100% cotton or a cotton-blend cord yarn. Cotton holds its shape better than acrylic, and you need that for the lattice walls. Pick a smooth, tightly plied yarn so the mesh cords look rounded and crisp.

  • Cream: about 220 g / 330 m (about 360 yd)

The quantity includes a margin of about 15% for your gauge swatch and for differences between yarn brands.

Tools:

  • 6.0 mm (US J-10) crochet hook
  • 4 locking stitch markers
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Spray bottle and a box or bundle of towels about 12 x 5 in (30.5 x 12.7 cm) for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • BLO – back loop only
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • PM – place marker
  • rev sc – reverse single crochet

Special stitch – Reverse single crochet (crab stitch): Work from left to right (right to left if you crochet left-handed). Insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, and draw through both loops. This makes the twisted, corded edge on the rim.

Note: In this pattern, the ch 2 at the start of a dc round and the ch 1 at the start of a sc round do not count as stitches.

Gauge and Checkpoints

Gauge:

  • 11 dc and 6 rounds = 4 in (10.2 cm)
  • 11 sc and 13 rounds = 4 in (10.2 cm)

There is only one piece, so the base is your gauge test. Work Rounds 1–4 and measure before you start the walls. Every wall and rim count depends on the base being the right size.

Checkpoints:

  • After Round 1: about 8 x 1.25 in (20.3 x 3.2 cm)
  • After Round 2: about 9.25 x 2.75 in (23.5 x 7.0 cm)
  • After Round 4: about 12 x 5.25 in (30.5 x 13.3 cm)
  • After Round 12: about 4.2 in (10.7 cm) tall
  • After Round 17: about 5.75 in (14.6 cm) tall

If the base is too big: Change to a 5.5 mm (US I-9) hook. If it is too small: Change to a 6.5 mm (US K-10.5) hook. Keep the stitch counts the same. Don’t add or remove rounds to fix size, because the wall math depends on 84 stitches.

Cream crocheted basket with open lattice weave and rope handles resting on a warm wood surface.

Base

Ch 22.

Round 1: Dc in 3rd ch from hook. This dc is the first stitch of End A. The 2 skipped chains do not count. Dc in next 18 ch for Long Side 1. Work 6 dc in the last ch for End B. Rotate the work and continue along the opposite side of the foundation chain. Dc in next 18 ch for Long Side 2. Work 5 dc in the last ch, which is the same ch that holds the first dc; this completes End A. Join with sl st to first dc.
Stitch count: 48 dc (18 per long side, 6 per end).

Round 2: Ch 2. Work 2 dc in first st. Dc in next 18 sts. Work 2 dc in each of next 6 sts. Dc in next 18 sts. Work 2 dc in each of last 5 sts. Join.
Stitch count: 60 dc (18 per long side, 12 per end).

Round 3: Ch 2. Dc in first st, 2 dc in next st. Dc in next 18 sts. Dc in next st, 2 dc in next st, repeat from * to * 6 times. Dc in next 18 sts. Dc in next st, 2 dc in next st, repeat 5 times. Join.
Stitch count: 72 dc (18 per long side, 18 per end).

Round 4: Ch 2. Dc in first 2 sts, 2 dc in next st. Dc in next 18 sts. Dc in next 2 sts, 2 dc in next st, repeat 6 times. Dc in next 18 sts. Dc in next 2 sts, 2 dc in next st, repeat 5 times. Join.
Stitch count: 84 dc (18 per long side, 24 per end).

Check the base now. It should lie flat and measure about 12 x 5.25 in (30.5 x 13.3 cm). If the ends ruffle, your increases are too loose for your tension; go down a hook size. If the ends cup, go up a hook size.

Turning Band

Round 5: Ch 1. Working in BLO, sc in each st around. Join.
Stitch count: 84 sc.

The unworked front loops leave a crisp ridge around the base, and the work starts to turn upward.

Round 6: Ch 1. Working through both loops, sc in each st around. Join.
Stitch count: 84 sc.

The band should now stand at a right angle to the base and be about 0.6 in (1.5 cm) tall.

Lattice Walls

The walls are a diamond mesh. Each ch-5 loop is anchored by a sc at the center of a loop from the round below, so the loops stack diagonally and form the trellis. Each round has 21 loops: 84 sts ÷ 4 sts per loop = 21.

Round 7: Ch 1. Sc in first st. Ch 5, sk 3 sts, sc in next st, repeat from * to * 20 times. This uses 81 sts. Ch 2, sk the last 3 sts, and dc in the first sc. The ch 2 plus dc stands in for the 21st ch-5 loop and leaves your hook at the center of that loop.
Count: 21 loops.

Rounds 8–11: Ch 1. Sc around the post of the dc just made. Ch 5, sc in next ch-5 sp, repeat from * to * 20 times. Ch 2, dc in first sc.
Count: 21 loops in each round.

Round 12: Ch 1. Sc around the post of the dc just made. Ch 5, sc in next ch-5 sp, repeat 20 times. Ch 5, join with sl st to first sc. This round closes with a full ch-5 loop so the next round has 21 even spaces to work into.
Count: 21 loops.

Six mesh rounds give about four full diamonds of height. Each round adds about 0.6 in (1.5 cm), so the lattice is about 3.6 in (9.1 cm) tall. The basket should now be about 4.2 in (10.7 cm) tall. Pull each loop gently upward as you go so the diamonds open evenly.

Rim and Handles (Border)

Border gauge: 11 sc and 13 rounds = 4 in (10.2 cm). The rim is solid sc, so it is firmer than the mesh and holds the top of the basket open.

Round 13 (conversion round): Ch 1. Sc in same sc as join. 3 sc in next ch-5 sp, sc in next sc, repeat from * to * 20 times. Work 3 sc in the last ch-5 sp. Join.
Stitch count: 21 sc (1 in each existing sc) + 63 sc (3 in each of 21 loops) = 84 sc.

Round 14: Ch 1. Sc in each st around. Join.
Stitch count: 84 sc.

Lay the basket flat so that the long sides line up with the long sides of the base. PM in the stitch at the exact center of each short end. The rim should have about 18 sts along each long side and 24 sts around each curved end, the same split as the base.

Round 15 (handle slots): Ch 1. Sc in each st to 4 sts before the first center marker. Ch 8, sk 8 sts (4 before the marker, the marked stitch, and 3 after it). Sc in each st to 4 sts before the second marker. Ch 8, sk 8 sts. Sc in each remaining st. Join.
Count: 68 sc + 2 ch-8 spaces (16 ch) = 84 sts.

Each slot is 8 sts wide, about 2.9 in (7.4 cm). That’s wide enough for four fingers.

Round 16: Ch 1. Sc in each sc, and work 8 sc into each ch-8 sp. Work these sc into the space, not into the chains, so the slot edge stays rounded and padded. Join.
Count: 68 sc + 16 sc (8 in each space) = 84 sc.

Round 17: Ch 1. Rev sc in each st around. Join with sl st to first rev sc.
Stitch count: 84 rev sc.

Fasten off and weave in the ends.

Why the math works: The base finishes at 84 sts. The turning band keeps 84. The mesh uses 84 ÷ 4 = 21 loops. The conversion round returns to exactly 21 + 63 = 84. The handle round keeps 84 because each 8-stitch skip is replaced by 8 chains. Since every wall round matches the base perimeter, the walls rise straight up without flaring or pulling in. With sc and dc at the same 11 sts per 4 in, 84 sts = about 30.5 in (77.5 cm) around both base and rim.

Final Blocking

  1. Fill a spray bottle with cool water and mist the basket evenly until it is damp, not soaked.
  2. Stuff it firmly with a box or rolled towels about 12 x 5 in (30.5 x 12.7 cm).
  3. Pull the base flat and square it so the long sides are straight and the ends are evenly rounded.
  4. Gently pull each lattice diamond upward and outward so all the diamonds are the same size.
  5. Shape the handle slots into smooth ovals with your fingers.
  6. Check the measurements: 12 in (30.5 cm) long, 5.25 in (13.3 cm) wide and 5.75 in (14.6 cm) tall.
  7. Let it dry completely, at least 24 hours, before you take out the filling.

For a stiffer basket, mist it with a diluted fabric stiffener (1 part stiffener to 3 parts water) before the final shaping.

Final Quality-Control Checklist

  • Base Round 4 has 84 dc and the base lies flat.
  • The BLO ridge runs evenly around the bottom edge.
  • Every mesh round has 21 loops.
  • The diamonds line up diagonally with no twisted or skipped loops.
  • Round 13 has exactly 84 sc.
  • The handle slots are centered on the short ends and directly opposite each other.
  • The rev sc edge is smooth and even all the way around.
  • The basket stands upright on its own after blocking.
  • All ends are woven in securely and hidden inside the solid sections.

Troubleshooting

Base ruffles: You have too many stitches for your tension. Check the counts per round, then try a smaller hook.

Base cups like a bowl: Your increases are too tight. Go up a hook size or loosen your tension at the ends.

Walls flare outward: Your mesh chains are too loose. Make tighter chains or use ch 4 loops instead, and keep 21 loops per round.

Walls lean inward: Your mesh chains are too tight. Relax your chain tension.

Loop count drifts: You missed or doubled a ch-5 sp. Place a marker in the first loop of each round and count to 21 before joining.

Handle slots are off-center: Re-fold the basket using the base as your guide, move the markers, and rework Round 15.

Walls are floppy: Block with diluted stiffener, or use a firmer cotton cord.

Care

Hand wash in cool water with mild soap, press out the water with a towel, and reshape over a box to dry flat. Don’t tumble dry, because heat can shrink the cotton and distort the lattice.

Cream crocheted basket holding rolled white towels on a marble bathroom vanity with fresh flowers and a mirror nearby.

Final Notes

The measurement chain is simple. The base sets the size at 84 sts and 12 x 5.25 in (30.5 x 13.3 cm). The turning band keeps 84 sts and adds 0.6 in (1.5 cm). The lattice turns those 84 sts into 21 diamond loops and adds 3.6 in (9.1 cm). The rim returns to exactly 84 sts and adds 1.5 in (3.8 cm), for a finished height of 5.75 in (14.6 cm). If you check the base after Round 4 and count every round, the rest of the basket will fall into place.

Happy crocheting!

Leave a Comment