Twilight Shell Moon Ornament Crochet Pattern

The Twilight Shell Moon is a lacy crescent ornament. Inside a sturdy purple frame sit four double crochet fans, stacked like open seashells. The fans alternate between deep violet and soft peach, and small open windows next to each fan let tree lights shine through.

This pattern makes one single ornament. It is a small, quick project that is good for using up leftover yarn, and you can make several in an evening for a tree, a gift topper, or a window hanging.

The pattern uses US crochet terms. The finished moon measures about 5 in (12.7 cm) from tip to tip and 2.5 in (6.4 cm) at its widest. The hanging loop adds another 1.5 in (3.8 cm).

Construction is simple. You work the fans and chain arches in short rows from the bottom of the moon to the top, changing color every two rows. Then you work two rounds of purple single crochet around the outside. The second round adds the two pointed tips and the hanging loop. Blocking sets the final crescent curve.

Finished Size and Construction

  • Finished size: 5 in (12.7 cm) tip to tip × 2.5 in (6.4 cm) wide, not counting the loop
  • Skill level: Easy–Intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK / light (#3), cotton or cotton blend
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1
  • Layout: 4 stacked fans with 3 chain-arch rows between them, worked as one strip
  • Piece size before border: 3.5 in (8.9 cm) tall along the center × 1.75 in (4.4 cm) wide
  • Border depth: about 3/8 in (1.0 cm) on each side, in 2 rounds

Materials

Yarn: Use a smooth, mercerized DK cotton. Cotton holds the fans crisp and keeps the frame firm, so the ornament doesn’t sag when it hangs. Acrylic also works but will give a softer, less defined edge.

  • Color A – Deep Purple: 6 g (14 m)
  • Color B – Peach: 3 g (7 m)

These amounts include a margin for joining tails and a test fan.

Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– Rustproof pins and a foam blocking mat
– Paper and a pencil to draw a blocking template
– Optional: spray starch or a fabric stiffener

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • RS – right side

Special stitch – Fan: Work 7 dc into one stitch or space. When the fan starts a row, the first ch-3 counts as the first dc.

Special stitch – Tip Spike: Ch 7, sl st in 2nd ch from hook, sc in next ch, hdc in next 2 ch, dc in next 2 ch. That makes 6 sts along the chain, which gives you a tapered point about 1 in (2.5 cm) long.

Gauge and Checkpoints

Exact gauge isn’t critical for an ornament. Still, your measurements should be close to these so the border counts lie flat.

Test first: Work Row 1 only, as a test fan. It should measure 1.5 in (3.8 cm) across the top and 0.75 in (1.9 cm) tall.

Border gauge: 5 sc = 1 in (2.5 cm).

Checkpoints:
– After Row 1: 1.5 in (3.8 cm) wide × 0.75 in (1.9 cm) tall
– After Row 2: 1.75 in (4.4 cm) from the end of the ch-2 sp to the end of the ch-4 sp
– After Row 7: 3.5 in (8.9 cm) along the center line
– After the border: 5 in (12.7 cm) tip to tip × 2.5 in (6.4 cm) wide
– Loop: 1.5 in (3.8 cm) tall

If your fan is too big: Go down to a 3.25 mm or 3.0 mm hook.
If your fan is too small or tight: Go up to a 3.75 mm or 4.0 mm hook.

Close-up of purple and peachy crocheted cord with braided texture against white marble.

Fan Body

You work the body in rows. Every fan row is worked with RS facing, and every arch row is worked with the wrong side facing. Each arch row starts on the side where the fan row before it ended. That side becomes the inner, hollow curve of the moon. Each arch row has a short ch-2 on the inner side and a long ch-4 on the outer side. Because the outer edge is longer, the strip bends into a crescent.

Row 1 (Color A – purple, fan)

Ch 4. Work 6 dc in the 4th ch from hook. Turn.
(7 dc, counting the skipped ch-3 as the first dc)

This fan is the bottom of the moon. The foundation chain makes a narrow pointed base.

Row 2 (Color A, arches)

Ch 1 (does not count as a st). Sc in the first dc, ch 2, sk next dc, sc in next dc, ch 3, sk next dc, sc in next dc, ch 4, sk next dc, sc in the top of the ch-3.
(4 sc, 1 ch-2 sp, 1 ch-3 sp, 1 ch-4 sp)

Fasten off Color A.

Check that you placed an sc on dc 1, 3, 5, and 7 and skipped dc 2, 4, and 6. The ch-2 side is the inner edge.

Row 3 (Color B – peach, fan)

With RS facing, join Color B in the center ch-3 sp. Ch 3, then work 6 dc in the same ch-3 sp. Turn.
(7 dc)

This fan touches the row below only at its base. The ch-2 and ch-4 sps stay empty on either side, and these are the open windows next to each fan.

Row 4 (Color B, arches)

Work as for Row 2.
(4 sc, 1 ch-2 sp, 1 ch-3 sp, 1 ch-4 sp)

Fasten off Color B.

Row 5 (Color A, fan)

Join Color A in the center ch-3 sp. Ch 3, then work 6 dc in the same sp. Turn.
(7 dc)

Row 6 (Color A, arches)

Work as for Row 2.
(4 sc, 1 ch-2 sp, 1 ch-3 sp, 1 ch-4 sp)

Fasten off Color A.

Row 7 (Color B, fan)

Join Color B in the center ch-3 sp. Ch 3, then work 6 dc in the same sp.
(7 dc)

Fasten off Color B. Checkpoint: the strip should be 3.5 in (8.9 cm) along its center line and about 1.75 in (4.4 cm) at its widest.

Weave in all body tails now, along the row ends. Keep them out of the open windows.

Border

The border is worked in Color A only. It covers the row ends, closes the edge of each open window, and makes the rope-like frame.

Border gauge: 5 sc = 1 in (2.5 cm).

Border Round 1 (sc frame)

With RS facing, join Color A with sc in the top of the ch-3 at the start of Row 7. This is the outer top corner.

Work around the piece in this order:

  1. Top edge: Sc in the joining st, then sc in each of the next 6 dc of Row 7. (7 sc)
  2. Inner edge: Work down the row ends toward the base. Work 2 sc around the end of each fan row (Rows 7, 5, 3, 1) and 1 sc around the end sc of each arch row (Rows 6, 4, 2). (4 × 2 + 3 × 1 = 11 sc)
  3. Base: Work 3 sc in the free loop at the base of the Row 1 foundation chain. (3 sc)
  4. Outer edge: Work up the row ends toward the top. Work 3 sc around the end of each fan row (Rows 1, 3, 5, 7) and 2 sc around the end sc of each arch row (Rows 2, 4, 6). (4 × 3 + 3 × 2 = 18 sc)

Sl st to the first sc to join.
Round total: 7 + 11 + 3 + 18 = 39 sc

Where there is a gap between a fan’s edge and the arch row beside it, keep your sc snug so the border closes over the gap instead of stretching across it.

Why the math works: A dc row end normally takes 2 sc. On the inner edge you work exactly 2 per fan row and only 1 per arch row, which gently pulls the hollow side in. On the outer edge you work 3 per fan row and 2 per arch row, which adds just enough length for the outer curve. The difference, 18 sc against 11 sc, matches the curve already started by the ch-4 and ch-2 arches. Working this way avoids ruffling and avoids cupping.

Border Round 2 (sc frame, tips, and loop)

Ch 1. Number the Round 1 sts as 1–39, starting from the joining sc.

  1. Top edge with loop: Sc in sts 1–3. In st 4, the center of the top, sc, then ch 18 and sl st into that same sc to make the loop. Work 24 sc into the ch-18 loop, then sl st into st 4 again. Sc in sts 5–7. (7 sc on the top edge; the loop is not counted)
  2. Top tip: Work a Tip Spike. (6 sts)
  3. Inner edge: Sc in sts 8–18. (11 sc)
  4. Bottom tip: Work a Tip Spike. (6 sts)
  5. Base and outer edge: Sc in sts 19–39. (3 + 18 = 21 sc)

Sl st to the first sc. Fasten off and weave in the ends.
Round total: 39 sc + 12 spike sts = 51 sts, plus the loop (ch 18 covered with 24 sc)

Why the math works: Round 2 has exactly one sc in each Round 1 st, with no increases. That keeps the frame flat and double-thick. All of the extra stitches go into the spikes, which grow straight out from the inner corners, so they don’t change the side counts. The 24 sc over 18 ch pack the loop firmly so it looks like a cord.

Checkpoint: about 5 in (12.7 cm) tip to tip and 2.5 in (6.4 cm) wide. The border should be about 3/8 in (1.0 cm) deep.

Final Blocking

  1. Draw a crescent template on paper: 5 in (12.7 cm) from tip to tip and 2.5 in (6.4 cm) at the widest point, with both tips curving toward the hollow side.
  2. Wet the ornament completely in cool water. Gently squeeze out the water. Don’t wring it.
  3. Roll it in a towel to remove extra moisture.
  4. Lay the template on the foam mat and place the ornament on top of it.
  5. Pin the outer curve first, using one pin about every 1/2 in (1.3 cm).
  6. Pin the inner curve, easing it to match the template.
  7. Bend each Tip Spike toward the hollow side and pin it at its very point.
  8. Open each fan into an even half-circle. Use a pin to open each window into a clean triangle.
  9. Pin the loop straight up.
  10. If you want a stiffer ornament, spray it lightly with starch.
  11. Let it dry completely, usually 12–24 hours, before you take out the pins.

Final Quality-Control Checklist

  • [ ] There are 4 fans, alternating purple and peach from the bottom up.
  • [ ] Each fan has 7 dc and sits in the center ch-3 sp of the arch row below.
  • [ ] Every arch row has its ch-2 on the inner edge and its ch-4 on the outer edge.
  • [ ] There are triangular windows on both sides of every fan base.
  • [ ] Round 1 has 39 sc: top 7, inner 11, base 3, outer 18.
  • [ ] Round 2 has 51 sts, including the 2 spikes of 6 sts each.
  • [ ] The loop is centered on the top edge and fully covered with sc.
  • [ ] The moon measures 5 in (12.7 cm) tip to tip and 2.5 in (6.4 cm) wide.
  • [ ] All tails are hidden inside the frame or row ends.

Troubleshooting

The moon is straight, not curved: Your arch rows may have ch-3 sps on both sides. Check that each one has a ch-2 on the inner side and a ch-4 on the outer side.

The moon curves the wrong way: You started an arch row on the wrong side. Each arch row has to begin where the fan before it ended.

The outer edge ruffles: Work 2 sc instead of 3 at each fan row end on the outer edge, or go down a hook size for the border.

The inner edge puckers tightly: Relax your tension on the inner edge only. Don’t add stitches.

The fans lean sideways: Make sure you joined in the center ch-3 sp and not in the ch-2 or ch-4 sp.

The tips are floppy: Starch the spikes, or work the spike with a hook one size smaller.

The loop twists: Block it straight. If it still twists, work 1–2 fewer sc over the chain.

Care

Hand wash in cool water and lay flat to dry, re-pinning the tips if needed. Store the ornament flat or hanging so the crescent keeps its shape.

Purple crocheted moon ornament with peach shell details hangs on an evergreen branch amid warm-white holiday lights.

Final Notes

Here is how the measurements build up. A 7-dc fan is 1.5 in (3.8 cm) wide. The arch row makes it 1.75 in (4.4 cm). Seven rows stack to 3.5 in (8.9 cm) along the center. Two border rounds, 39 sc and then 51 sts, add 3/8 in (1.0 cm) all around and bring the moon to 5 in (12.7 cm) tip to tip and 2.5 in (6.4 cm) wide, with a 1.5 in (3.8 cm) loop on top. If you check each of these numbers as you go, every moon you make will match the others on the tree.

Happy crocheting!

Leave a Comment