This butterfly hangs on the wall and keeps your charging cables tidy. A deep purple butterfly-shaped base holds lilac upper wings and turquoise lower wings. A purple body runs down the center, and a raised keeper strip with five bands holds coiled cables.
The palette has three colors. A corded reverse single crochet edge frames the shape, and raised vein lines fan across each wing. The style is clean and graphic.
The pattern uses US crochet terms. The finished organizer measures 9.5 in (24.1 cm) wide and 8.5 in (21.6 cm) tall. With the hanging loop and the strip tail, it is about 10.75 in (27.3 cm) tall in total.
You’ll make it in four stages. First, crochet the base in single crochet rows. Next, sew on four quarter-circle fan wings. Then add the body strip and loop, and work the border. Last, sew the five bands onto the keeper strip and stitch it down the center.
Finished Size and Construction
- Finished size: 9.5 in x 8.5 in (24.1 cm x 21.6 cm)
- Skill level: Advanced beginner
- Terminology: US
- Yarn weight: Worsted (#4)
- Hook: 4.0 mm (US G-6)
- Number of pieces: 12 (1 base, 4 wings, 1 body strip, 1 keeper strip, 5 bands)
- Layout: Mirrored butterfly: 2 upper wings, 2 lower wings, center body
- Piece size: Each wing is a quarter circle with a 3.5 in (8.9 cm) radius
- Size before border: 9 in x 8 in (22.9 cm x 20.3 cm)
- Border depth: 0.25 in (0.6 cm) per side
Materials
Use a smooth worsted cotton or cotton blend. Cotton holds its shape when it hangs and shows the texture clearly. Acrylic also works, but it stretches more under the weight of cables.
- Deep purple: 80 g / 149 m
- Lilac: 20 g / 37 m
- Turquoise: 20 g / 37 m
These quantities include a margin of about 15 percent for the gauge swatch and sewing.
Tools: 4.0 mm (US G-6) hook, tapestry needle, stitch markers, rust-proof pins, scissors, and a measuring tape.
Abbreviations (US Terms)
- ch: chain
- sc: single crochet
- dc: double crochet
- sl st: slip stitch
- sc2tog: single crochet 2 together
- st(s): stitch(es)
- RS: right side
- rev sc: reverse single crochet
Reverse single crochet: Work from left to right. Insert the hook in the next st to the right, pull up a loop, yarn over, and pull through both loops on the hook.
Surface slip stitch: Hold the yarn behind the fabric. Insert the hook from the front, pull up a loop, and draw it through the loop on the hook. Repeat to make a raised line.
Gauge and Checkpoints
- Single crochet: 16 sc and 18 rows = 4 in (10.2 cm)
- Double crochet: 16 dc and 8 rows = 4 in (10.2 cm)
Make one wing first to test your gauge:
- After Row 4, each straight edge should measure 2 in (5.1 cm).
- After Row 7, each straight edge should measure 3.5 in (8.9 cm).
Check the base at these points:
- After Row 7: 9 in (22.9 cm) wide
- After Row 20: about 4.4 in (11.2 cm) tall
- After Row 36: 8 in (20.3 cm) tall
If your pieces are too big, go down 0.5 mm in hook size. If they are too small, go up 0.5 mm. Measure flat, without stretching.

Base Panel (Make 1, Deep Purple)
The ch 1 at the start of each row does not count as a stitch. Turn at the end of every row.
Lower Lobe 1
- Row 1: Ch 11, sc in 2nd ch from hook and in each ch across. (10 sts)
- Row 2: 2 sc in first st, sc to last st, 2 sc in last st. (12 sts)
- Row 3: Repeat Row 2. (14 sts) Fasten off.
Lower Lobe 2: Work Rows 1–3 the same way. Do not fasten off.
Main Rows
- Row 4 (joining row): Ch 1, sc in each of the 14 sts of Lobe 2, ch 2, sc in each of the 14 sts of Lobe 1. (28 sc + 2 ch = 30 sts) The ch-2 gap forms the bottom notch.
- Row 5: Ch 1, 2 sc in first st, sc in each sc and ch to last st, 2 sc in last st. (32 sts)
- Row 6: Ch 1, 2 sc in first st, sc to last st, 2 sc in last st. (34 sts)
- Row 7: Repeat Row 6. (36 sts)
- Rows 8–15: Ch 1, sc in each st across. (36 sts)
- Row 16 (waist): Ch 1, sc2tog, sc to last 2 sts, sc2tog. (34 sts)
- Rows 17–20: Ch 1, sc in each st across. (34 sts)
- Row 21: Ch 1, 2 sc in first st, sc to last st, 2 sc in last st. (36 sts)
- Rows 22–30: Ch 1, sc in each st across. (36 sts)
- Row 31: Ch 1, sc2tog, sc to last 2 sts, sc2tog. (34 sts)
Top Lobe 1
- Row 32: Ch 1, sc in next 17 sts and leave the other 17 sts unworked. (17 sts)
- Row 33: Ch 1, sc2tog, sc to last 2 sts, sc2tog. (15 sts)
- Row 34: Repeat Row 33. (13 sts)
- Row 35: Repeat Row 33. (11 sts)
- Row 36: Repeat Row 33. (9 sts) Fasten off.
Top Lobe 2: Join yarn in the 18th st of Row 31 and work Rows 32–36 the same way. Fasten off.
The base now measures 9 in (22.9 cm) at its widest and 8 in (20.3 cm) tall. The waist measures 8.5 in (21.6 cm).
Wings (Make 4)
Make 2 wings in lilac for the upper wings and 2 in turquoise for the lower wings. All four are identical. Flip two of them over to mirror the shape. The ch 3 at the start of each row counts as 1 dc.
- Row 1: Make a magic ring. Ch 3, then work 3 dc in the ring and pull it closed. (4 sts)
- Row 2: Ch 3, turn, 2 dc in each of next 3 sts. (7 sts)
- Row 3: Ch 3, turn, [2 dc in next st, dc in next st] 3 times. (10 sts)
- Row 4: Ch 3, turn, [2 dc in next st, dc in next 2 sts] 3 times. (13 sts)
- Row 5: Ch 3, turn, [2 dc in next st, dc in next 3 sts] 3 times. (16 sts)
- Row 6: Ch 3, turn, [2 dc in next st, dc in next 4 sts] 3 times. (19 sts)
- Row 7: Ch 3, turn, [2 dc in next st, dc in next 5 sts] 3 times. (22 sts)
Fasten off and leave a 24 in (61.0 cm) tail for sewing.
Each row adds 3 sts, which is how a quarter circle grows at dc gauge. By Row 7 the radius is 3.5 in (8.9 cm) and the arc is 5.5 in (14.0 cm), which equals 22 sts at 4 sts per inch. That is why the wing lies flat.
Veins: Using the wing color, work 3 lines of surface slip stitch from the ring out to the arc. Space them evenly so that each line follows one of the three increase sections.
Body Strip (Make 1, Deep Purple)
- Row 1: Ch 7, sc in 2nd ch from hook and in each ch across. (6 sts)
- Rows 2–36: Ch 1, turn, sc in each st across. (6 sts)
The strip measures 1.5 in x 8 in (3.8 cm x 20.3 cm). Do not fasten off.
Hanging loop: Ch 18, then sl st in the first st of Row 36 to form a loop. Work 26 sc into the loop and push them together until they cover the chain. Sl st in the last st of Row 36 and fasten off. The loop stands about 2 in (5.1 cm) tall.
Keeper Strip (Make 1, Deep Purple)
- Row 1: Ch 5, sc in 2nd ch from hook and in each ch across. (4 sts)
- Row 2: Ch 1, turn, 2 sc in first st, sc in next 2 sts, 2 sc in last st. (6 sts)
- Row 3: Ch 1, turn, 2 sc in first st, sc to last st, 2 sc in last st. (8 sts)
- Rows 4–37: Ch 1, turn, sc in each st across. (8 sts)
- Row 38: Ch 1, turn, sc2tog, sc to last 2 sts, sc2tog. (6 sts)
- Row 39: Repeat Row 38. (4 sts)
Edging round: Ch 1 and do not turn. Work the round in this order:
- Across Row 39: 2 sc in first st, sc in next 2 sts, 2 sc in last st. (6 sc)
- Down the side: 1 sc in each row end. (39 sc)
- Across the foundation: 2 sc in first st, sc in next 2 sts, 2 sc in last st. (6 sc)
- Up the other side: 1 sc in each row end. (39 sc)
Join with a sl st. (90 sts) The strip measures about 2.5 in x 9 in (6.4 cm x 22.9 cm) and has rounded ends.
Bands (Make 5, Deep Purple)
- Row 1: Ch 15, sc in 2nd ch from hook and in each ch across. (14 sts)
- Rows 2–3: Ch 1, turn, sc in each st across. (14 sts)
Fasten off and leave an 8 in (20.3 cm) tail. Each band measures 3.5 in x 0.7 in (8.9 cm x 1.8 cm).
Make All Pieces
- Deep purple: 1 base, 1 body strip with loop, 1 keeper strip, 5 bands
- Lilac: 2 upper wings
- Turquoise: 2 lower wings
[ loop ]
[ lilac wing ][ body ][ lilac wing ]
[ teal wing ][ body ][ teal wing ]
keeper strip + 5 bands over body
Joining
Wings: Lay the base RS up. Mark a vertical center line, and a waist line 4 in (10.2 cm) up from the bottom.
- Place each wing with its ring corner where the two lines meet and its arc facing outward.
- Leave 0.75 in (1.9 cm) open on each side of the center line for the body.
- Check the margins. Each wing should sit 0.25 in (0.6 cm) inside the widest side edge and 0.5 in (1.3 cm) inside the top and bottom.
- Whipstitch around each wing with its own color, catching one edge loop and one base stitch for each stitch.
Keep your sewing tension snug but relaxed. If a wing ripples, the stitches are too tight.
Body strip: Center the strip so it covers the inner edges of the wings by 0.125 in (0.3 cm). Line its bottom up with the base bottom. Its top rises above the center dip, level with the tops of the lobes. Whipstitch both long edges wherever the strip overlaps the base.
Checkpoint: The panel should still measure 9 in x 8 in (22.9 cm x 20.3 cm). If it has drawn in, loosen the seams.
Border (Deep Purple)
Border gauge: Work 4 sc per inch along stitch edges and 1 sc per row end.
Round 1: Join yarn at the outer corner of the left top lobe and ch 1. Fold the ends of the body strip forward so you work into the base only. Work the sections in this order:
- Left top lobe: 2 sc in corner st, sc in next 8 sts. (10 sc)
- Left side: 1 sc in each row end. (36 sc)
- Left lower lobe: 2 sc in corner st, sc in next 9 sts. (11 sc)
- Bottom notch: 3 sc up the inner edge, sc2tog over the ch-2, 3 sc down the other inner edge. (7 sts)
- Right lower lobe: Sc in next 9 sts, 2 sc in corner st. (11 sc)
- Right side: 1 sc in each row end. (36 sc)
- Right top lobe: 2 sc in corner st, sc in next 8 sts. (10 sc)
- Top dip: 4 sc down the inner edge, sc2tog over the lowest row end of each lobe, 4 sc up the other inner edge. (9 sts)
Join with a sl st. (130 sts)
Round 2: Ch 1, rev sc in each st around. Join and fasten off. (130 sts)
Why the math works:
- Each side has 36 rows, so it gets 36 sc.
- One extra sc at each of the four outer corners lets the edge turn smoothly.
- One sc2tog at each inner curve keeps the notch and the dip from flaring.
- Round 2 is worked one stitch into each stitch, so the count stays at 130.
The two rounds add 0.25 in (0.6 cm) per side, for a final size of 9.5 in x 8.5 in (24.1 cm x 21.6 cm).
Keeper strip assembly:
- Place the first band 0.75 in (1.9 cm) from the top end of the keeper strip, with 1 in (2.5 cm) gaps between bands. The five bands span 7.5 in (19.1 cm).
- Sew each band’s ends to the long edges of the strip. A 3.5 in (8.9 cm) band crossing a 2.5 in (6.4 cm) strip leaves about 1 in (2.5 cm) of slack for a cable coil.
- Center the keeper strip over the body strip, with its top just below the loop. Its bottom should extend 0.5 in (1.3 cm) below the bottom border.
- Whipstitch the strip down through its edging round.
Final Blocking
- Mist the organizer lightly, or hover a steam iron over it without pressing.
- Pin it RS up to 9.5 in x 8.5 in (24.1 cm x 21.6 cm).
- Ease each wing arc smooth.
- Round out all four lobes evenly.
- Leave the bands unpinned so they keep their slack.
- Let it dry completely, then unpin.
Final Quality-Control Checklist
- The base has 36 rows and measures 9 in (22.9 cm) at its widest.
- Each wing has 22 sts in Row 7 and lies flat.
- The wings are symmetrical around the body.
- Both border rounds have 130 sts.
- The organizer measures 9.5 in x 8.5 in (24.1 cm x 21.6 cm).
- The bands are evenly spaced and each one has slack.
- The loop is firmly anchored, and all ends are woven in.
Troubleshooting
- Wings ruffle: Your dc is too short. Go up a hook size.
- Wings cup: Your dc is too tall. Go down a hook size.
- Border waves: Add one sc2tog along each side in Round 1.
- Border pulls in: Add 1 sc at each lobe curve.
- Cables don’t fit: Add 2 sts to each band.
- Organizer curls when hung: Block it again and loosen any tight seams.
Care
Remove the cables first. Hand wash the organizer in cool water and lay it flat to dry.

Final Notes
Your gauge sets the 9 in x 8 in (22.9 cm x 20.3 cm) base. Wings with a 3.5 in (8.9 cm) radius fill each quarter beside the 1.5 in (3.8 cm) body. The 130-stitch border adds 0.25 in (0.6 cm) per side, bringing the size to 9.5 in x 8.5 in (24.1 cm x 21.6 cm). If every checkpoint matches, the butterfly will hang flat and hold five cables neatly.
Happy crocheting!