This lace angel looks like a classic Christmas ornament, but it also keeps your cables tidy. A tan strip runs down its center, and four cream bands across the strip each hold one coiled charging cable. Hang it from a peg near your desk and your cords stay organized all season.
The angel is ivory fingering-weight cotton. It has an open diamond mesh, two bands of upward-opening fans, scalloped fan wings, and a spoked halo. Light tan outlines every piece and traces the top of each fan, and a cream star sits at the neckline. The pattern uses US terms.
The finished angel is 8.625 in (21.9 cm) wide at the hem and 9.75 in (24.8 cm) tall, or 10.75 in (27.3 cm) tall with the hanging loop.
You make each part separately and give each lace piece its tan border. Then you block all the pieces and sew them together flat.
Finished Size and Construction
- Finished size: 8.625 in (21.9 cm) wide x 9.75 in (24.8 cm) tall, plus a 1 in (2.5 cm) hanging loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Fingering (super fine, #1) mercerized cotton
- Hook: 2.75 mm (US C-2)
- Number of pieces: 10 (body, 2 wings, halo, star, strip, 4 cable bands)
- Layout: halo above body, wings at shoulders, strip down center front, star on top of strip
- Body before border: 8.125 in (20.6 cm) wide at hem x 7 in (17.8 cm) tall
- Body border depth: 0.375 in (1.0 cm) at hem, 0.25 in (0.6 cm) at sides and neck
- Wing: 4.25 in (10.8 cm) straight edge x 2.125 in (5.4 cm) deep, bordered
- Halo: 2.5 in (6.4 cm) across, bordered
- Strip: 1.5 in (3.8 cm) x 6.75 in (17.1 cm), bordered
Materials
Use a smooth mercerized cotton of about 170 m per 50 g. It gives crisp lace and blocks well. Avoid stretchy fibers, because the mesh would sag under the weight of the cables.
- Color A, Ivory: 30 g / 102 m (body, wings, halo, star, bands)
- Color B, Light Tan: 20 g / 68 m (borders, fan accents, strip, hanging loop)
Both quantities include a margin of about 20 percent.
Tools:
– 2.75 mm (US C-2) hook
– Tapestry needle
– Stitch markers
– Rust-proof pins and blocking mat
– Spray bottle
– Tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS – right side
- loop – a ch-5 space in the mesh
Fan: 13 dc worked into one loop.
Surface sl st: Hold the yarn behind the work. Insert the hook from front to back, pull up a loop, and draw it through the loop on your hook.
Gauge and Checkpoints
Mesh gauge: 8 loops = 5 in (12.7 cm) wide. 4 mesh rows = 1.5 in (3.8 cm) tall. One fan row = 1.25 in (3.2 cm) tall.
Sc gauge: 16 sc and 18 rows = 2.5 in (6.4 cm).
Test one piece first: make a wing. After Row 2, it should measure 1 in (2.5 cm) from center to edge. After Row 4, it should measure 2 in (5.1 cm).
Body checkpoints:
– After Row 1: 8.125 in (20.6 cm) wide
– After Row 3: 2 in (5.1 cm) tall
– After Row 9: 5.125 in (13.0 cm) tall, 5.625 in (14.3 cm) wide
– After Row 14: 7 in (17.8 cm) tall, neck 3.125 in (7.9 cm) wide
If your piece is too big, go down 0.25 mm in hook size. If it is too small, go up 0.25 mm. If only the height is off, change how tall you pull up your dc instead of changing hooks.

Body
Work the body flat from the hem up in Color A, so the fans open upward. In every row, the beginning ch-5 counts as the first loop.
Mesh row: Ch 5, turn, sc in first loop, ch 5, sc in next loop across, with the last sc in the turning loop. The loop count stays the same.
Decrease row: Turn, sl st in first 3 ch of first loop, ch 5, sc in next loop, ch 5, sc in next loop across. This removes 1 loop. Because you turn every row, the decreases alternate sides.
Ch 54.
Row 1: Sc in 6th ch from hook, ch 5, sk 3 ch, sc in next ch 12 times. (13 loops)
Row 2 (fan row): Ch 5, turn, sc in first loop, sk next loop, Fan in next loop, sk next loop, sc in next loop 3 times. (3 fans, 4 sc)
Row 3 (conversion row): Ch 5, turn, sk 2 dc, sc in next dc, [ch 5, sk 3 dc, sc in next dc] twice, ch 5, sk 2 dc, sc in next sc, ch 5 3 times, omitting the final ch 5 on the last repeat. Then ch 5 and sc in the turning loop. This is (4 sc x 3 fans) + 1 sc = 13 loops.
Rows 4–7: Work a decrease row 4 times. (12, 11, 10, 9 loops)
Row 8 (fan row): Ch 5, turn, sc in first loop, sk next loop, Fan in next loop, sk next loop, sc in next loop twice. (2 fans, 3 sc)
Row 9 (conversion row): Work as Row 3, but repeat twice. This is (4 sc x 2 fans) + 1 sc = 9 loops.
Rows 10–13: Work a decrease row 4 times. (8, 7, 6, 5 loops)
Row 14: Work a mesh row. (5 loops) Fasten off.
The fans sit on loops 3, 7, and 11 of 13 and on loops 3 and 7 of 9, so both bands are centered.
Fan Accents
With RS facing and Color B, surface sl st across the tops of the 13 dc of each fan (13 sl st per fan, 65 total). Fasten off after each fan. This makes the tan arch over each shell.
Wings (Make 2)
With Color A, ch 4.
Row 1 (RS): 12 dc in 4th ch from hook. (13 dc, counting the skipped ch)
Row 2: Ch 5 (counts as dc + ch 2), turn, dc in next dc, ch 2 to last st, dc in top of turning ch. (13 dc, 12 ch-2 sp)
Row 3: Ch 3 (counts as dc), turn, 2 dc in first ch-2 sp, 3 dc in each of next 11 ch-2 sp, dc in 3rd ch of turning ch. (1 + 2 + 33 + 1 = 37 dc)
Row 4: Ch 1, turn, sc in first dc, sk 2 dc, 5 dc in next dc, sk 2 dc, sc in next dc 6 times. (6 scallops, 7 sc) Fasten off.
Halo
With Color A, ch 12 and join with a sl st to form a ring.
Rnd 1: Ch 3 (counts as dc), 23 dc in ring, join. (24 dc)
Rnd 2: Ch 4 (counts as dc + ch 1), dc in next dc, ch 1 around, join in 3rd ch of ch-4. (24 dc spokes, 24 ch-1 sp) Fasten off.
Border
Border gauge: 6.4 sc per inch (2.5 cm). Every count below comes from this number.
Body Border
Rnd 1: With RS facing, join Color B at the bottom left corner and work 1 sc in the corner. Then work:
– Hem: 52 sc (4 per foundation loop x 13)
– Corner: 1 sc
– Right side: 48 sc (3 per mesh-row end x 12 + 6 per fan-row end x 2)
– Corner: 1 sc
– Neck: 20 sc (4 per loop x 5)
– Corner: 1 sc
– Left side: 48 sc
Join. (168 side sc + 4 corner sc = 172 sc)
Rnd 2: Ch 1, 3 sc in corner sc. Along the hem, sk 1, 5 dc in next st, sk 1, sc in next st 13 times. This uses exactly 52 sts (4 x 13). Work 3 sc in corner, sc in each of 48 side sts, 3 sc in corner, sc in each of 20 neck sts, 3 sc in corner, sc in each of 48 side sts, join. (Hem: 13 scallops + 13 sc. Sides and neck: 48, 20, 48 sc. Corners: 12 sc.) Fasten off.
Why the math works: One loop is 0.625 in (1.6 cm) wide, and 0.625 x 6.4 = 4 sc. The 13-loop hem takes 52 sc = 8.125 in (20.6 cm). The 5-loop neck takes 20 sc = 3.125 in (7.9 cm). Each slanted side is about 7.5 in (19.1 cm) long, and 48 / 6.4 = 7.5. Since 52 divides evenly by 4, the scallops finish exactly at the corners.
Wing Border
With RS facing, join Color B in the first sc of Row 4.
– Curved edge: Sc in each sc. Over each scallop, sc in next 2 dc, 3 sc in center dc, sc in next 2 dc. (7 + 6 x 7 = 49 sc)
– Straight edge: 2 sc in each of Rows 3, 2, and 1 row ends (6 sc), 1 sc in the foundation ch, then 2 sc in each of Rows 1, 2, and 3 row ends (6 sc). (13 sc)
Join. (62 sc) Fasten off.
Halo Border and Hanging Loop
Rnd 3: Join Color B in the ch-1 sp at the top of the halo. Sc in sp, sc in next dc around, join. (48 sc)
Hanging loop: Do not fasten off. Ch 16 and sl st in the same st. Ch 1, work 24 sc over the ch-16 loop, and sl st at its base. The loop stands 1 in (2.5 cm) tall. Fasten off.
Star
With Color A, make a magic ring.
Rnd 1: 10 sc in ring, join. (10 sc)
Rnd 2: Ch 5, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next ch, sk 1 sc, sl st in next sc 5 times. (5 points, about 1.5 in / 3.8 cm across) Fasten off.
Center Strip
With Color B, ch 9.
Row 1: Sc in 2nd ch from hook and in each ch across. (8 sc)
Rows 2–47: Ch 1, turn, sc in each sc. (8 sc) The strip is now 1.25 in (3.2 cm) x 6.5 in (16.5 cm).
Border Rnd: Ch 1. Work 47 sc down the long side (1 per row end), (sc, ch 1, sc) in the corner, 8 sc across the end, (sc, ch 1, sc) in the corner, 47 sc up the other side, (sc, ch 1, sc) in the corner, 8 sc across the top, (sc, ch 1, sc) in the last corner, and join. (110 side sc + 8 corner sc = 118 sc, plus 4 ch-1 sp) The strip is now 1.5 in (3.8 cm) x 6.75 in (17.1 cm).
Cable Bands (Make 4)
With Color A, ch 19.
Row 1: Sc in 2nd ch from hook and in each ch across. (18 sc)
Rows 2–5: Ch 1, turn, sc in each sc. (18 sc) Each band is 2.8 in (7.1 cm) x 0.7 in (1.8 cm). Leave a 10 in (25.4 cm) tail for sewing.
Make All Pieces
- Color A: 1 body, 2 wings, 1 halo, 1 star, 4 cable bands
- Color B: 1 strip, plus all borders, fan accents, and the hanging loop
Assembly layout (front view):
[ hanging loop ]
( HALO )
[ WING L ] [ STAR ] [ WING R ]
| strip |
|=BAND1=|
|=BAND2=|
|=BAND3=|
|=BAND4=|
| strip |
~~~~ scalloped hem ~~~~
Joining
Block all pieces first. Sew with Color B, whipstitching through the back loops of the tan border stitches and matching one border stitch to one border stitch.
- Halo: Place the halo behind the neck so it overlaps the body by 0.375 in (1.0 cm), centered over the 20 neck sc. Sew along the overlap.
- Wings: Place each wing behind one top corner of the body with its straight edge angled about 30 degrees upward. Overlap 0.5 in (1.3 cm) and sew through both layers.
- Strip: Center the strip on the front of the body with its top at the neck. Whipstitch both long edges, catching 1 strip-border sc at each mesh crossing.
- Bands: Place the first band 1 in (2.5 cm) below the top of the strip, then one every 1.5 in (3.8 cm). Sew only the 0.7 in (1.8 cm) short ends to the strip edges. The extra 1.3 in (3.3 cm) of length bows outward to hold the cables.
- Star: Sew the star over the top of the strip.
Sew with relaxed tension. Tight stitches pucker the mesh.
Size checkpoint: The assembled angel should measure 8.625 in (21.9 cm) at the hem and 9.75 in (24.8 cm) from the hem to the top of the halo.
Final Blocking
- Weave in all ends, hiding them in the borders and strip.
- Mist the angel until it is evenly damp.
- Pin the hem straight at 8.625 in (21.9 cm), with one pin in each scallop.
- Pin the sides straight up to the 3.125 in (7.9 cm) neck.
- Open the mesh diamonds and shape each fan into a smooth arch.
- Pin out the wing scallops, and pin the halo into a 2.5 in (6.4 cm) circle.
- Let it dry completely before unpinning.
Final Quality-Control Checklist
- Hem 8.625 in (21.9 cm), height 9.75 in (24.8 cm)
- 3 lower fans and 2 upper fans, all centered
- 13 hem scallops
- 62 sc on each wing border
- 48 sc on the halo border, with a firm hanging loop
- Strip straight and centered
- 4 bands evenly spaced and bowed outward
- All ends secured
Troubleshooting
- Body leans to one side: Two decreases ended up on the same side. Start every decrease row by turning.
- Fans ruffle: Your dc are too tall. Shorten them, or use 11 dc per fan and work the conversion sc into the 2nd, 6th, and 10th dc.
- Hem border waves: You have too many stitches on the hem. Recount to 52 sc.
- Wings curl: Row 3 is too tight. Work that row with a hook 0.25 mm larger.
- Bands too snug: Add 2 ch to the band foundation, which gives 20 sc per row.
Care
Hand wash in cool water with mild soap. Roll the angel in a towel, dry it flat, and re-pin the edges if needed.

Final Notes
The measurements build on one another. One loop is 0.625 in (1.6 cm), which equals 4 border sc. Thirteen loops make the 8.125 in (20.6 cm) hem. The body is 7 in (17.8 cm) tall, and its border brings the hem to 8.625 in (21.9 cm). The halo brings the total height to 9.75 in (24.8 cm). If you check each checkpoint as you go, the pieces fit together without adjusting.
Happy crocheting!