This curtain has a navy lace valance with a row of pointed scallops. A beaded strand hangs from the tip of each point. The strands carry mustard stars, mustard crescent moons, and round navy and mustard balls, and each one ends in a navy teardrop. In front of a sunny window the navy reads as night sky, and the mustard pieces seem to glow.
The style is boho-cozy and suits a kitchen window, reading nook, or nursery doorway. All instructions use US crochet terms.
The finished curtain measures 30 1/4 in (76.8 cm) wide and 17 3/4 in (45.1 cm) long, not counting the hanging loops. The header is 5 in (12.7 cm) deep including the border. Each strand drops 12 3/4 in (32.4 cm) below its point.
You’ll work the header flat in rows and then shape ten points one at a time. Next you chain a cord from each point tip. The stars, moons, balls and teardrops are made separately and sewn onto the cords. Last, a two-row border along the top adds eleven hanging loops.
Finished Size and Construction
- Finished size: 30 1/4 in (76.8 cm) x 17 3/4 in (45.1 cm)
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 1 header with 10 cords worked onto it, plus 60 balls, 10 teardrops, 5 stars and 5 moons
- Layout: 10 strands in a row, alternating Strand A (star) and Strand B (moon)
- Header size before border: 30 1/4 in (76.8 cm) x 4 1/2 in (11.4 cm)
- Border depth: 1/2 in (1.3 cm)
- Strand drop: 12 3/4 in (32.4 cm)
Materials
Use a smooth worsted-weight mercerized or combed cotton. Cotton keeps the points crisp and the stars flat, and it barely stretches on the rod. Avoid fuzzy yarns because they hide the eyelets.
- Navy: 200 g / about 340 m (header, cords, 25 balls, 10 teardrops)
- Mustard: 110 g / about 187 m (35 balls, 5 stars, 5 moons)
These quantities include a margin of about 10 percent for swatching and tails.
Tools:
– 4.5 mm (US 7) hook
– Tapestry needle
– Polyester fiberfill (a small amount)
– Stitch markers and measuring tape
– Blocking mats and rust-proof pins
– 11 clip curtain rings and a rod
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- MR: magic ring
- sp: space
- st(s): stitch(es)
- RS: right side
- sc2tog: single crochet 2 together
Special stitch: dc2tog. (Yarn over, insert hook in next st, pull up a loop, yarn over, pull through 2 loops) twice. Then yarn over and pull through all 3 loops. Points start each row with ch 2 (doesn’t count) and a dc2tog, which keeps the slanted edges smooth.
Gauge and Checkpoints
- Dc: 16 sts and 8 rows = 4 in (10.2 cm)
- Sc: 16 sts and 16 rows = 4 in (10.2 cm)
- Chain: 5 ch = 1 in (2.5 cm)
Test one piece first. Before you start the header, make one star, one ball, and a 20-st dc swatch. Check the star against 3 in (7.6 cm) across and the ball against 3/4 in (1.9 cm).
Checkpoints:
– After Row 2: 30 1/4 in (76.8 cm) wide
– After Row 4: 1 3/4 in (4.4 cm) deep
– Each point: 3 in (7.6 cm) wide, 2 3/4 in (7.0 cm) deep
– Header before border: 4 1/2 in (11.4 cm) deep
– Star: 3 in (7.6 cm); moon: 3 in (7.6 cm) tip to tip
– Ball: 3/4 in (1.9 cm); teardrop: 1 1/4 in (3.2 cm)
– Cord: 11 1/2 in (29.2 cm)
If your pieces are too big, use a 4.0 mm hook. If they’re too small, use a 5.0 mm hook. Change only the hook and keep every stitch count the same.

Header (Navy)
Foundation: Ch 122.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (121 sc)
Row 2: Ch 3 (counts as dc), dc in each st across, turn. (121 dc)
Checkpoint: 30 1/4 in (76.8 cm) wide.
Row 3 (lace row): Ch 1, sc in first st, ch 5, skip 3 sts, sc in next st 30 times, turn. (31 sc and 30 ch-5 sps; 1 + 30 x 4 = 121 sts covered)
Row 4: Ch 3 (doesn’t count), 4 dc in each ch-5 sp across, turn. (120 dc = 30 sps x 4 dc)
Checkpoint: the body is 1 3/4 in (4.4 cm) deep.
The 120 dc of Row 4 divide into 10 groups of 12 sts. Each group becomes one point.
Points (Navy)
With RS facing, work Point 1 over the first 12 sts of Row 4. For each of the other points, join navy with RS facing in the first unworked st of Row 4, right next to the previous point.
Row P1: Ch 2 (doesn’t count), dc2tog, dc in next 8 sts, dc2tog, turn. (10 sts)
Row P2: Ch 2, dc2tog, ch 1, skip 1 st, dc in next st 3 times, dc2tog, turn. (8 sts: 1 + 6 + 1)
Row P3: Ch 2, dc2tog, dc in next 4 sts (each ch-1 sp counts as a st), dc2tog, turn. (6 sts)
Row P4: Ch 2, dc2tog, ch 1, skip 1 st, dc in next st, dc2tog, turn. (4 sts)
Row P5: Ch 2, dc2tog twice, turn. (2 sts)
Row P6: Ch 1, sc2tog. (1 st, the tip) Fasten off.
The eyelets in Rows P2 and P4 make each point lacy. Make 10 points in total. Since 10 x 12 = 120, the last point ends on the last dc of Row 4.
Checkpoint: each point is 3 in (7.6 cm) wide and 2 3/4 in (7.0 cm) deep. The header is 4 1/2 in (11.4 cm) deep.
Stars (Mustard, Make 5)
Rnd 1: In MR, ch 4 (counts as dc + ch 1), (dc, ch 1) 4 times, sl st to 3rd ch of beg ch-4. (5 dc, 5 ch-1 sps)
Rnd 2: Ch 1, sc in dc, 2 sc in ch-1 sp 5 times, sl st to first sc. (15 sc)
Rnd 3: Ch 6, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next ch, tr in next ch, skip 2 sc, sl st in next sc 5 times. The last sl st goes into the first sc. (5 points)
Each point uses 3 sc, so 5 x 3 = 15. Fasten off with a 10 in (25.4 cm) tail. Checkpoint: 3 in (7.6 cm) across.
Moons (Mustard, Make 5)
Foundation: Ch 16.
Row 1: Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next 2 ch, 2 tr in each of next 5 ch, dc in next 2 ch, hdc in next ch, sc in next ch, sl st in last ch, turn. (20 sts from 15 ch)
Row 2 (outer edge): Ch 1, sc in first 5 sts, 2 sc in each of next 10 sts, sc in last 5 sts. (30 sc = 20 worked once + 10 extra)
Inner edge: Don’t turn. Sl st in each of the 15 foundation-ch loops.
The increases curve the outer edge, which pulls the chain side into the hollow of the crescent. The tall stitches show as ridges. Fasten off with a 10 in (25.4 cm) tail. Checkpoint: 3 in (7.6 cm) tip to tip and 1 1/2 in (3.8 cm) at the widest point.
Balls (Make 25 Navy, 35 Mustard)
Rnd 1: 5 sc in MR. (5)
Rnd 2: 2 sc in each st. (10)
Rnd 3: Sc in each st. (10) Stuff firmly.
Rnd 4: Sc2tog 5 times. (5)
Close the opening and leave an 8 in (20.3 cm) tail. Checkpoint: 3/4 in (1.9 cm).
Teardrops (Navy, Make 10)
Rnd 1: 4 sc in MR. (4)
Rnd 2: Sc in next st, 2 sc in next st twice. (6)
Rnd 3: Sc in next 2 sts, 2 sc in next st twice. (8)
Rnd 4: Sc in each st. (8) Stuff.
Rnd 5: Sc2tog 4 times. (4)
Close the opening. The MR end forms the point. Checkpoint: 1 1/4 in (3.2 cm) long.
Make All Pieces
| Piece | Navy | Mustard |
|---|---|---|
| Header | 1 | 0 |
| Balls | 25 | 35 |
| Teardrops | 10 | 0 |
| Stars | 0 | 5 |
| Moons | 0 | 5 |
Strand A has 3 navy and 3 mustard balls. Strand B has 2 navy and 4 mustard balls. Five of each gives 25 navy and 35 mustard balls.
Layout (strands run left to right A, B, A, B, A, B, A, B, A, B):
Strand A Strand B
M M
N N
STAR M
N MOON
M M
N N
M M
TD TD
M = mustard ball, N = navy ball, TD = navy teardrop.
Joining
Cords: With RS facing, insert hook in a point’s tip st (Row P6) and pull up a navy loop. Ch 58 for 11 1/2 in (29.2 cm), then fasten off. Repeat on all 10 tips. Each cord starts from exactly 1 st, so the cords hang 3 in (7.6 cm) apart, the same as the 12-st point width.
Placement, measured down from the tip:
– Strand A: balls at 1/2 in and 1 3/4 in (1.3 cm and 4.4 cm). Star from 3 in to 6 in (7.6 cm to 15.2 cm). Balls at 6 1/2, 7 3/4, 9 and 10 1/4 in (16.5, 19.7, 22.9 and 26.0 cm).
– Strand B: balls at 1/2, 1 3/4 and 3 in (1.3, 4.4 and 7.6 cm). Moon from 4 1/4 in to 7 1/4 in (10.8 cm to 18.4 cm). Balls at 7 3/4, 9 and 10 1/4 in (19.7, 22.9 and 26.0 cm).
– Both strands: teardrop starts at 11 1/2 in (29.2 cm).
Each ball takes up 3/4 in (1.9 cm), with a 1/2 in (1.3 cm) gap below it.
Sewing: Lay each ball over its cord. Use the ball’s tail to stitch through the chain loops and back through the center of the ball twice, then bury the tail inside. Tack each star at its top and bottom points and each moon at both tips. Sew the wide end of the teardrop to the end of the cord.
Tension: Hang the header before you sew so the cords can relax. Don’t stretch the chain while you stitch.
Checkpoint: each strand is 12 3/4 in (32.4 cm) long.
Border (Navy)
Border gauge: sc, 16 sts = 4 in (10.2 cm). The border has 2 rows and is 1/2 in (1.3 cm) deep.
Border Row 1: With RS facing, join at the lower right corner of the body, at the top of Row 4.
- Work up the side with 1 sc per sc row and 2 sc per dc row: 1 + 2 + 1 + 2 = 6 sc.
- Ch 1 at the corner (not counted as a st).
- Sc in each of the 121 foundation-ch loops.
- Ch 1 at the corner, then work 6 sc down the left side.
Fasten off. (6 sc on each side + 121 sc on top = 133 sc)
Border Row 2 (hanging loops): With RS facing, join in the first top sc. Ch 1, sc in the same st, ch 6, sl st in the sc just made. Then sc in next 12 sts, ch 6, sl st in last sc made 10 times. Fasten off. (121 sc, 11 loops)
Why the math works: 121 = 1 + (10 x 12), so the loops fall on sts 1, 13, 25 and so on through 121. That puts them every 3 in (7.6 cm): one at each end and one above each valley between points, which shares the weight of the strands evenly.
Final Blocking
- Soak the curtain in cool water for 10 minutes.
- Roll it in a towel to press out the water. Don’t wring.
- Pin the header flat to 30 1/4 in x 5 in (76.8 cm x 12.7 cm).
- Pin each point tip so its edges are straight and the eyelets are open.
- Lay the strands straight and shape the stars and moons with your fingers.
- Let it dry completely.
Final Quality-Control Checklist
- [ ] Header is 30 1/4 in (76.8 cm) wide.
- [ ] All 10 points measure 3 in x 2 3/4 in (7.6 cm x 7.0 cm).
- [ ] The 11 loops are 3 in (7.6 cm) apart.
- [ ] Strands alternate A and B and are 12 3/4 in (32.4 cm) long.
- [ ] Balls are firm and centered on their cords.
- [ ] All tails are buried.
Troubleshooting
- Points curl: Block them harder, and check that you worked dc2tog rather than skipping sts.
- Header ruffles: The Row 3 chains are too loose. Use ch 4 instead of ch 5.
- Strands twist: Mist them and let them dry hanging, with a clothespin clipped to each teardrop.
- Stuffing shows through: Make the balls with a smaller hook.
Care
Hand wash in cool water, reshape the points, and dry flat. Keep the curtain out of strong direct sun so the navy doesn’t fade.

Final Notes
Here’s the full measurement chain:
- A gauge of 16 sts = 4 in (10.2 cm) makes the 121-st header 30 1/4 in (76.8 cm) wide.
- The 12-st points add 2 3/4 in (7.0 cm), for 4 1/2 in (11.4 cm) before the border.
- The border brings the header to 5 in (12.7 cm).
- The 12 3/4 in (32.4 cm) strands finish the curtain at 17 3/4 in (45.1 cm).
Happy crocheting!