The Seaglass Fan Stripe Curtain Panel is a lacy tab-top curtain worked in one piece. Stripes of solid fans in deep forest green and soft mint alternate with open cream lattice rows. Light comes through the mesh, and the fans give the panel a bold, regular stripe.
The palette has three colors: dark green, mint and cream. The fans in each mint stripe sit half a repeat over from the fans in the green stripe, so the pattern reads as a gentle wave from top to bottom. A narrow cream border frames the panel, and nine cream tabs hold it on the rod.
This pattern uses US crochet terms. Before the tabs, the panel measures 34 1/4 in (87.0 cm) wide and 74 1/4 in (188.6 cm) long. From the top of the tabs to the bottom edge it is 77 1/4 in (196.2 cm) long.
The construction is simple. You work the body from the bottom up in rows and change color every two rows. Then you add a two-round cream border, work the tabs straight off the top edge and fold them over. For a pair of curtains, make two identical panels.
Finished Size and Construction
- Finished size: 34 1/4 in x 74 1/4 in (87.0 cm x 188.6 cm), plus 3 in (7.6 cm) tab loops
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 panel (the tabs are worked onto it, not made separately)
- Layout: Horizontal stripes: 18 dark green and 18 mint fan stripes, separated by cream mesh
- Piece size before border: 33 1/4 in x 73 1/4 in (84.5 cm x 186.1 cm)
- Border depth: 1/2 in (1.3 cm) on every side
Materials
Choose a smooth worsted-weight cotton, mercerized or matte, with about 190 m per 100 g. Cotton keeps the fan shapes crisp, sags less than acrylic on a long hanging piece and washes well. Avoid very fuzzy yarns because they blur the lattice.
Yarn (per panel):
- Cream (A): 700 g, about 1,330 m
- Dark green (B): 350 g, about 665 m
- Mint (C): 350 g, about 665 m
These amounts include a margin of about 10 percent for the gauge swatch and small tension differences. Double them for a pair.
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- Stitch markers
- Scissors
- Measuring tape
- Blocking mats, or a clean floor covered with towels, plus rust-proof pins
- Spray bottle
Abbreviations (US Terms)
- ch chain
- sc single crochet
- hdc half double crochet
- dc double crochet
- tr treble crochet
- sk skip
- st(s) stitch(es)
- sl st slip stitch
- RS / WS right side / wrong side
Fan: 11 dc worked into the same stitch.
Half fan: 6 dc worked into the same stitch. You use half fans at the edges of the offset rows. When a half fan opens a row, the ch 3 counts as the first dc.
Gauge and Checkpoints
Gauge: 12 sts (one fan repeat) = 3 in (7.6 cm) wide, and 8 pattern rows = 4 in (10.2 cm) tall, measured after light blocking.
Make a swatch before you start a 74 in panel. Ch 26, then work Row 1 and Rows 2-9 once. You will have 25 sts and 9 rows. The swatch should be about 6 1/4 in (15.9 cm) wide. Measure the middle 12-st repeat; it should be 3 in (7.6 cm).
- If the swatch is too big: Go down to a 4.5 mm hook.
- If the swatch is too small: Go up to a 5.5 mm hook.
- If the width is right but the height is off: Pull your dc and tr up to full height so they aren’t squashed.
Checkpoints on the panel:
- After Row 1: 33 1/4 in (84.5 cm) wide
- After Row 9: about 4 1/4 in (10.8 cm) long
- After Row 73: about 36 1/4 in (92.1 cm) long
- After Row 145: about 72 1/4 in (183.5 cm) long
- After Row 147: 33 1/4 in x 73 1/4 in (84.5 cm x 186.1 cm)
Measure the panel flat, without stretching it. It will drop a little when hung, so don’t add extra rows early to make up for that.

Panel Body
The stitch count is a multiple of 12 + 1. This panel uses 11 repeats + 1 = 133 sts. Every row ends with 133 sts, so the edges stay straight.
Foundation: With A, ch 134.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (133 sc)
Stripe Repeat (Rows 2-9)
Row 2 (A, mesh): Ch 1, sc in first st, *ch 5, sk 3 sts, sc in next st; rep from * 33 times, turn. (34 sc and 33 ch-5 loops)
Row 3 (A, solid): Ch 3 (counts as dc), *3 dc in next ch-5 loop, dc in next sc; rep from * 33 times. Count: 1 + (33 x 4) = 133 sts. Fasten off A, turn.
The ch-5 arches of Row 2 form the open cream lattice. Row 3 fills them in, so the next fan row starts on a full stitch count.
Row 4 (B, fans): Join B in first st. Ch 1, sc in first st, *sk 5 sts, fan in next st, sk 5 sts, sc in next st; rep from * 11 times, turn. Count: 12 sc + (11 x 11 dc) = 133 sts.
Row 5 (B, cap): Ch 4 (counts as tr), *hdc in next 2 sts, sc in next 7 sts, hdc in next 2 sts, tr in next sc; rep from * 11 times. Count: 1 + (11 x 12) = 133 sts. Fasten off B, turn.
The tr stitches fill the dips between fans and the sc stitches sit on the fan tops. The dark green stripe closes flat, and each fan keeps its rounded outline.
Row 6 (A, mesh): Join A. Work as Row 2. (34 sc and 33 ch-5 loops)
Row 7 (A, solid): Work as Row 3. (133 sts) Fasten off A, turn.
Row 8 (C, offset fans): Join C in first st. Ch 3 (counts as dc), 5 dc in same st (half fan made), sk 5 sts, sc in next st, *sk 5 sts, fan in next st, sk 5 sts, sc in next st; rep from * 10 times, sk 5 sts, half fan in last st, turn. Count: 6 + 1 + (10 x 12) + 6 = 133 sts.
Row 9 (C, offset cap): Ch 1, sc in first 4 sts, hdc in next 2 sts, tr in next sc, *hdc in next 2 sts, sc in next 7 sts, hdc in next 2 sts, tr in next sc; rep from * 10 times, hdc in next 2 sts, sc in last 4 sts (the last st is the top of the ch-3). Count: 4 + 2 + 1 + (10 x 12) + 2 + 4 = 133 sts. Fasten off C, turn.
Each mint fan sits straight above a sc from the green fan row. That shifts the mint fans half a repeat and creates the staggered wave.
Rows 10-145: Rep Rows 2-9 seventeen more times, for 18 repeats in total. (133 sts)
Top Band
Row 146 (A): Work as Row 2. (34 sc and 33 ch-5 loops)
Row 147 (A): Work as Row 3. (133 sts) Fasten off.
The body now measures 33 1/4 in x 73 1/4 in (84.5 cm x 186.1 cm). Weave in the color-change tails inside the row ends along the side edges, where the border will cover them.
Border
Border gauge: 4 sc = 1 in (2.5 cm) along every edge. This matches the body gauge of 12 sts = 3 in.
Each side count below includes that side’s 2 corner stitches. A corner stitch is the center sc of each 3-sc corner group.
Round 1 (RS): With RS facing, join A in first st of Row 147.
- Top edge: Ch 1, 3 sc in same st (corner), sc in next 131 sts, 3 sc in last st (corner).
- First side: Working into the row ends, work 2 sc in the end of each row from Row 146 down to Row 2 (145 rows, 290 sc), then 1 sc in the end of Row 1.
- Bottom edge: Working into the free loops of the foundation ch, 3 sc in first ch (corner), sc in next 131 ch, 3 sc in last ch (corner).
- Second side: 1 sc in the end of Row 1, then 2 sc in the end of each row from Row 2 up to Row 146 (290 sc).
- Sl st to first sc.
Round 1 counts:
- Top and bottom: 131 sts between corners, 133 including corner centers
- Each long side: 291 sts between corners, 293 including corner centers
- Total: (131 x 2) + (291 x 2) + (4 x 3) = 856 sts
Why the math works: 133 sts at 4 per in = 33 1/4 in (84.5 cm), which is exactly the body width. 293 sts at 4 per in = 73 1/4 in (186.1 cm), which is exactly the body length. Two sc per row end matches the gauge of 8 rows = 4 in (16 sc per 4 in), so the edges won’t ruffle or pull in.
Round 2: Ch 1, sc in each st around, working 3 sc in each corner center st. Sl st to first sc.
- Top and bottom: 133 sts between corners, 135 including corner centers
- Each long side: 293 sts between corners, 295 including corner centers
- Total: 856 + (4 x 2) = 864 sts
Fasten off. The panel now measures 34 1/4 in x 74 1/4 in (87.0 cm x 188.6 cm).
Tabs
The top edge of Round 2 has 135 sts, including the corner centers. Divide it into 9 tabs of 7 sts with 8 gaps of 9 sts between them: (9 x 7) + (8 x 9) = 63 + 72 = 135.
Before you start, place a marker in the 1st and 7th st of each tab, counting from the top right corner center st. Each tab is 1 3/4 in (4.4 cm) wide, and each gap is 2 1/4 in (5.7 cm).
Tab rows: With RS facing, join A in the first st of a tab. Ch 1, sc in same st and in next 6 sts, turn. (7 sc) Repeat this row until the tab measures 6 in (15.2 cm), about 24 rows. Fasten off, leaving a 12 in (30.5 cm) tail.
Make all 9 tabs. Fold each tab to the WS and sew its last row to the base of the same tab along Round 1 of the border. This forms a loop 3 in (7.6 cm) tall that fits rods up to 1 1/2 in (3.8 cm) across.
Final Blocking
- Weave in all remaining ends securely, splitting the cotton plies as you go.
- Lay the panel flat on the mats or towels, RS up.
- Spray it evenly until it’s damp but not dripping.
- Pin the outer edges to 34 1/4 in x 74 1/4 in (87.0 cm x 188.6 cm), keeping the corners square.
- Gently open each fan with your fingers and straighten the cream lattice rows.
- Flatten the tabs so they lie straight and parallel.
- Let the panel dry completely, then unpin it.
Final Quality-Control Checklist
- Every body row has 133 sts, and every mesh row has 33 loops.
- The green fans and mint fans are offset by half a repeat all the way up.
- There are 18 dark green stripes and 18 mint stripes.
- Border Round 2 has 864 sts, with 3 sc at each corner.
- The 9 tabs are evenly spaced, and each is 7 sts wide.
- The panel measures 34 1/4 in x 74 1/4 in (87.0 cm x 188.6 cm) before the tabs.
- All ends are woven in and can’t be seen from the RS.
Troubleshooting
- Fans cup or ruffle: Your dc may be too loose. Go down one hook size and check your gauge again.
- The cap row puckers: Check that each tr sits in the sc between two fans and is pulled up to full height.
- Mint fans sit straight above green fans: You started Row 8 like Row 4. Rip back and begin Row 8 with the half fan.
- Edges ripple: You placed too many sc along the sides. Keep exactly 2 sc per row end.
- Edges pull in: You have too few border sts. Check for missed row ends.
- The panel hangs too short: This is rare, because cotton relaxes over time. If you need more length, work one more Rows 2-9 repeat before the top band. That adds 4 in (10.2 cm), so also add 16 sc to each long side in border Round 1.
- Tabs twist: Make sure every tab row has 7 sts, and sew the tabs down straight.
Care
Hand wash, or machine wash cold on a gentle cycle in a mesh bag, then lay the panel flat to dry. Reshape it while damp, and don’t hang it wet, because that can stretch it.

Final Notes
Here is how the measurements build up:
- 12 sts = 3 in (7.6 cm), so 133 sts = 33 1/4 in (84.5 cm) wide.
- 8 rows = 4 in (10.2 cm), so 18 repeats plus the foundation row and top band = 73 1/4 in (186.1 cm) long.
- The two border rounds add 1/2 in (1.3 cm) on each side, for 34 1/4 in x 74 1/4 in (87.0 cm x 188.6 cm).
- The tabs add 3 in (7.6 cm), for a hanging length of 77 1/4 in (196.2 cm).
Check your gauge and count each fan row, and your panel will hang straight and even.
Happy crocheting!