This hanging toilet paper holder is a soft, practical piece for a bathroom wall hook. A deep green sling holds a spare roll, a scalloped front flap covers the top of the roll, and a white daisy with two lime-green leaves decorates the front. A slim green loop at the top lets it hang from a hook or towel ring.
The palette is small: forest green for the body, handle, and flower center, white for the petals, and lime green for the leaves. Firm single crochet in worsted-weight cotton gives a dense, slightly pebbled fabric that holds its shape in a damp room.
This pattern uses US crochet terms. The finished holder measures about 5.25 in (13.3 cm) wide and 8.5 in (21.6 cm) tall including the hanging loop. It fits a standard roll about 4.5 in (11.4 cm) wide and 4.5 in (11.4 cm) across.
You’ll crochet a long rectangular strip, a small flap with a scalloped border on three sides, a two-row cord for the loop, one daisy, and two leaves. Then you sew the strip into a ring, add the loop and flap at the top, and stitch the flower and leaves onto the flap.
Finished Size and Construction
- Finished size: about 5.25 in (13.3 cm) wide x 8.5 in (21.6 cm) tall, hanging
- Skill level: Easy / advanced beginner
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 6 (strip, flap, hanging cord, daisy, 2 leaves)
- Layout: The strip forms a ring. The loop rises from the top, the flap hangs from the top front, and the daisy and leaves sit on the flap.
- Strip size: 4 x 16 in (10.2 x 40.6 cm) before edging, 4.5 x 16.5 in (11.4 x 41.9 cm) after
- Flap size before border: 3.75 x 3.25 in (9.5 x 8.3 cm)
- Flap size after border: 5.25 x 4.25 in (13.3 x 10.8 cm)
- Border depth: 0.25 in (0.6 cm) for the sc round, plus 0.5 in (1.3 cm) for the scallops
Materials
Use a smooth worsted-weight cotton, either mercerized or plain. Cotton gives crisp stitch definition, handles humidity well, and doesn’t stretch much under the weight of a roll. Avoid fuzzy or splitty yarn, which blurs the scallops and petals.
- Color A, forest green: 70 g, about 112 m (strip, flap, cord, daisy center)
- Color B, white: 10 g, about 16 m (petals)
- Color C, lime green: 5 g, about 8 m (leaves)
These quantities include a margin of about 15%.
Tools:
- 4.0 mm (G-6) crochet hook
- Tapestry needle
- Scissors
- 4 stitch markers
- Straight pins
- Measuring tape
- Blocking mat and spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- sp – space
- MR – magic ring
- RS – right side
Special stitch – Scallop: sk 1 st, 5 dc in next st, sk 1 st, sc in next st. Each scallop uses 4 sts of the previous round and ends with a sc.
Gauge and Checkpoints
Gauge: 16 sc and 16 rows = 4 in (10.2 cm), worked in sc rows. That’s 4 sts and 4 rows per inch.
Make the flap first. It’s the smallest piece and works as your gauge swatch.
Checkpoints:
- Flap after Row 13: 3.75 x 3.25 in (9.5 x 8.3 cm)
- Flap after Border Rnd 1: 4.25 x 3.75 in (10.8 x 9.5 cm)
- Flap after Border Rnd 2: 5.25 x 4.25 in (13.3 x 10.8 cm)
- Strip after Row 16: 4 x 4 in (10.2 x 10.2 cm)
- Strip after Row 64: 4 x 16 in (10.2 x 40.6 cm)
- Strip after edging: 4.5 x 16.5 in (11.4 x 41.9 cm)
If your piece is too big, switch to a 3.75 mm (F-5) hook. If it’s too small, switch to a 4.5 mm (7) hook. Change the hook, never the stitch counts, because the scallop math depends on exact counts.

Strip (Sling)
Use Color A.
Row 1: Ch 17, sc in 2nd ch from hook and in each ch across. (16 sc)
Rows 2–64: Ch 1, turn, sc in each st across. (16 sc)
Checkpoint: 4 x 16 in (10.2 x 40.6 cm). Don’t fasten off.
Edging Rnd: Ch 1, turn. Work 3 sc in first st (corner), sc in next 14 sts, and 3 sc in last st (corner). Work down the long side with sc in each row end (64 sc). Working into the free loops of the foundation chain, work 3 sc in first ch (corner), sc in next 14 ch, and 3 sc in last ch (corner). Work up the second long side with sc in each row end (64 sc). Sl st to first sc and fasten off.
Edging count: 4 corners x 3 sc = 12, plus 2 x 14 = 28, plus 2 x 64 = 128, for a total of 168 sts. Counted from corner center to corner center, each short side has 18 sts and each long side has 68 sts: (2 x 18) + (2 x 68) – 4 shared corners = 168.
Checkpoint: 4.5 x 16.5 in (11.4 x 41.9 cm). Weave in ends.
Flap
Use Color A.
Row 1: Ch 16, sc in 2nd ch from hook and in each ch across. (15 sc)
Rows 2–13: Ch 1, turn, sc in each st across. (15 sc)
Checkpoint: 3.75 x 3.25 in (9.5 x 8.3 cm). Don’t fasten off. Row 13 is the top edge. Continue with the flap border in the Border section.
Hanging Cord
Use Color A.
Row 1: Ch 33, sc in 2nd ch from hook and in each ch across. (32 sc)
Row 2: Ch 1, turn, sc in each st across. (32 sc)
Fasten off and leave a 12 in (30.5 cm) tail. The cord measures 8 x 0.5 in (20.3 x 1.3 cm). It curls slightly, which gives it a rounded, rope-like look.
Daisy
Rnd 1 (Color A): MR, 6 sc in ring, sl st to first sc. (6 sc)
Rnd 2: Ch 1, 2 sc in each st around, sl st to first sc. (12 sc) Fasten off Color A. The center measures 1 in (2.5 cm) across.
Rnd 3 (Color B): Join in any st. Ch 1, sc in same st, ch 3, sk 1, sc in next st. Repeat from * to * 4 more times. Ch 3, sk last st, sl st to first sc. (6 sc, 6 ch-3 sps)
Rnd 4: Sl st into first ch-3 sp. In each ch-3 sp, work (sc, hdc, 3 dc, hdc, sc). Sl st to first sc. (6 petals of 7 sts, 42 sts total)
Fasten off and leave a 12 in (30.5 cm) tail. The daisy measures 2.75 in (7.0 cm) across.
Leaves (Make 2)
Use Color C.
Side 1: Ch 8. Sl st in 2nd ch from hook (tip), sc in next ch, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in last ch (base). (7 sts)
Side 2: Ch 1 and rotate to work along the opposite side of the chain. Sc in first ch, hdc in next ch, dc in next 2 ch, hdc in next ch, sc in next ch. In the tip ch, work (sl st, ch 2, sl st). (6 sts plus tip)
Fasten off and leave an 8 in (20.3 cm) tail. Each leaf measures 2 x 1 in (5.1 x 2.5 cm). The chain down the middle forms a raised center vein.
Make All Pieces
- Color A: 1 strip, 1 bordered flap, 1 cord, 1 daisy center
- Color B: 6 daisy petals
- Color C: 2 leaves
Layout (front view, hanging):
( loop )
| |
+-----------------------+ <- straight top edge of flap
| daisy |
| leaf leaf | <- flap, 5.25 in wide
+~~~~~~~~~~~~~~~~~~~~~~~+ <- scallops on sides and bottom
| strip ring + roll | <- ring, 4.5 in wide
+-----------------------+
Joining
Sew with Color A and a tapestry needle. Whipstitch through both loops of each edge stitch. Keep each stitch snug but not tight, so the seams lie flat without puckering.
1. Close the ring. Overlap the strip’s short ends by 1 in (2.5 cm), with the RS facing out. Whipstitch both short edges of the overlap, matching st to st across the 16 edge sts. The inner circumference is 15.5 in (39.4 cm), about 4.9 in (12.4 cm) across, which leaves room to slide a roll in and out.
2. Attach the cord. Fold the cord in half. Lay both ends on the overlap, 1.5 in (3.8 cm) apart and overlapping the ring by 0.75 in (1.9 cm), with the loop pointing up. Sew around each end. About 3.5 in (8.9 cm) of loop stands above the ring.
3. Attach the flap. Center the straight top edge of the flap on the front of the overlap, just below the cord ends, with the RS out. Whipstitch the 15 center top sts in place. The flap overhangs the 4.5 in (11.4 cm) ring by about 0.375 in (1.0 cm) on each side.
4. Add the trims. Pin the leaves in a shallow V with their bases 1 in (2.5 cm) above the bottom scallops. Pin the daisy above them so its lower petals overlap the leaf bases. Sew the leaves with Color C. Sew the daisy with Color B around the petal bases, then add a few stitches around the center.
Size checkpoint: When hanging, the holder measures 5.25 in (13.3 cm) wide and 8.5 in (21.6 cm) tall to the top of the loop.
Border
Border gauge: 4 sc per inch, the same as the body. Each scallop uses 4 sts and spans about 1 in (2.5 cm).
Flap Border Rnd 1: Continue from Row 13. Ch 1, turn. Work 3 sc in first st (corner A), sc in next 13 sts, and 3 sc in last st (corner B). Work down the side with 13 sc, one in each row end. Working into the foundation chain, work 3 sc in first ch (corner C), sc in next 13 ch, and 3 sc in last ch (corner D). Work up the second side with 13 sc in the row ends. Sl st to first sc.
Count: Each side, counted from corner center to corner center, has 1 + 1 + 13 + 1 + 1 = 17 sts. The total is (4 x 17) – 4 shared corners = 64 sts. Check: 12 corner sts + (4 x 13) = 64.
Flap Border Rnd 2: Sl st in next st (the center of corner A). Ch 1, sc in same st.
- Top (straight): Sc in next 15 sts, then sc in the center of corner B.
- Side 1: Scallop 4 times. The last sc lands in the center of corner C.
- Bottom: Scallop 4 times. The last sc lands in the center of corner D.
- Side 2: Scallop 3 times. Then sk 1, 5 dc in next st, sk 1, and sl st to the first sc.
Fasten off and weave in ends.
Count: 12 scallops x 5 dc = 60 dc. The sc total is 17 along the top + 4 + 4 + 3 = 28 sc. That gives 88 sts.
Why the math works: Each scalloped side has 17 sts. After the corner sc, 16 sts remain, and 16 ÷ 4 = exactly 4 scallops. The top uses 17 sts. Then 17 + (12 x 4) – 1 = 64, because the last scallop closes on the first sc instead of making a new one. That matches Rnd 1 exactly.
Strip edging: This is the 168-st sc round in the Strip section. It adds 0.25 in (0.6 cm) on every side.
Final Blocking
- Before assembly, pin the flap, daisy, and leaves RS up on a mat.
- Pin the flap to 5.25 x 4.25 in (13.3 x 10.8 cm), with one pin at each scallop tip.
- Open the petals and pin the daisy to 2.75 in (7.0 cm) across.
- Pin each leaf to 2 x 1 in (5.1 x 2.5 cm) with a pointed tip.
- Pin the strip flat at 4.5 x 16.5 in (11.4 x 41.9 cm).
- Mist until damp, not soaked.
- Let everything dry completely, then assemble.
- Leave a roll in the ring overnight to set the curve.
Final Quality-Control Checklist
- Strip edging has 168 sts with neat corners
- Flap Rnd 1 has 64 sts. Rnd 2 has 12 even scallops and a straight top edge
- Flap measures 5.25 x 4.25 in (13.3 x 10.8 cm)
- Ring overlap is 1 in (2.5 cm), and both short edges are sewn
- Loop ends are secure and the loop stands evenly
- Flap is centered and its top edge sits level
- Daisy has 6 even petals, and the leaves mirror each other
- Tails are woven through at least 1.5 in (3.8 cm) of fabric
- A roll slides in and out without stretching the ring
Troubleshooting
- Strip edges wave: You worked extra sts. Redo the edging with exactly 64 sc per long side.
- Edges pull in: You skipped row ends. Work into every one.
- Scallops don’t fit: Recount Rnd 1. Each side needs 17 sts from corner center to corner center.
- Scallops curl: Pin them firmly when blocking, or go down half a hook size.
- Ring too tight: Reduce the overlap to 0.5 in (1.3 cm), or add 4 rows to the strip.
- Loop stretches: Add a third sc row to the cord.
- Daisy cups: Block it flat and sew down every petal base.
Care
Hand wash in cool water with mild soap, press out the water, and dry flat. Reshape the scallops while they’re damp.

Final Notes
The measurements build on each other. A gauge of 16 sc x 16 rows = 4 in (10.2 cm) gives a 3.75 x 3.25 in (9.5 x 8.3 cm) flap. The sc round brings it to 4.25 x 3.75 in (10.8 x 9.5 cm), and the scallops bring it to 5.25 x 4.25 in (13.3 x 10.8 cm). The same gauge gives a 4 x 16 in (10.2 x 40.6 cm) strip, which becomes 4.5 x 16.5 in (11.4 x 41.9 cm) after edging and closes into a 15.5 in (39.4 cm) ring. If each checkpoint matches, the holder will hang straight and hold the roll securely.
Happy crocheting!